summaryrefslogtreecommitdiff
path: root/drivers/net/vxlan.c
AgeCommit message (Collapse)Author
2013-05-18vxlan: Update vxlan fdb 'used' field after each usageSridhar Samudrala
Fix some instances where vxlan fdb 'used' field is not updated after the entry is used. v2: rename vxlan_find_mac() as __vxlan_find_mac() and create a new vxlan_find_mac() that also updates ->used field. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: do not set SKB_GSO_UDPDmitry Kravkov
Since SKB_GSO_* flags are set by appropriate gso_segment callback in TCP/UDP layer. CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: allow choosing destination port per vxlanstephen hemminger
Allow configuring the default destination port on a per-device basis. Adds new netlink paramater IFLA_VXLAN_PORT to allow setting destination port when creating new vxlan. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: compute source port in network byte orderstephen hemminger
Rather than computing source port and returning it in host order then swapping later, go ahead and compute it in network order to start with. Cleaner and less error prone. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: source compatiablity with IFLA_VXLAN_GROUP (v2)stephen hemminger
Source compatiability for build iproute2 was broken by: commit c7995c43facc6e5dea4de63fa9d283a337aabeb1 Author: Atzm Watanabe <atzm@stratosphere.co.jp> vxlan: Allow setting destination to unicast address. Since this commit has not made it upstream (still net-next), and better to avoid gratitious changes to exported API's; go back to original definition, and add a comment. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: fix byte order issues with NDA_PORTstephen hemminger
The NDA_PORT attribute was added, but the author wasn't careful about width (port is 16 bits), or byte order. The attribute was being dumped as 16 bits, but only 32 bit value would be accepted when setting up a device. Also, the remote port is in network byte order and was being compared with default port in host byte order. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: document UDP default portstephen hemminger
The default port for VXLAN is not same as IANA value. Document this. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29vxlan: update mail address and copyright datestephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-22VXLAN: Allow L2 redirection with L3 switchingDavid Stevens
Allow L2 redirection when VXLAN L3 switching is enabled This patch restricts L3 switching to destination MAC addresses that are marked as routers in order to allow virtual IP appliances that do L2 redirection to function with VXLAN L3 switching enabled. We use L3 switching on VXLAN networks to avoid extra hops when the nominal router for cross-subnet traffic for a VM is remote and the ultimate destination may be local, or closer to the local node. Currently, the destination IP address takes precedence over the MAC address in all cases. Some network appliances receive packets for a virtualized IP address and redirect by changing the destination MAC address (only) to be the final destination for packet processing. VXLAN tunnel endpoints with L3 switching enabled may then overwrite this destination MAC address based on the packet IP address, resulting in potential loops and, at least, breaking L2 redirections that travel through tunnel endpoints. This patch limits L3 switching to the intended case where the original destination MAC address is a next-hop router and relies on the destination MAC address for all other cases, thus allowing L2 redirection and L3 switching to coexist peacefully. Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16vxlan: Allow setting destination to unicast address.Atzm Watanabe
This patch allows setting VXLAN destination to unicast address. It allows that VXLAN can be used as peer-to-peer tunnel without multicast. v4: generalize struct vxlan_dev, "gaddr" is replaced with vxlan_rdst. "GROUP" attribute is replaced with "REMOTE". they are based by David Stevens's comments. v3: move a new attribute REMOTE into the last of an enum list based by Stephen Hemminger's comments. v2: use a new attribute REMOTE instead of GROUP based by Cong Wang's comments. Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15vxlan: don't bypass encapsulation for multi- and broadcastsMike Rapoport
The multicast and broadcast packets may have RTCF_LOCAL set in rt_flags and therefore will be sent out bypassing encapsulation. This breaks delivery of packets sent to the vxlan multicast group. Disabling encapsulation bypass for multicasts and broadcasts fixes the issue. Signed-off-by: Mike Rapoport <mike.rapoport@ravellosystems.com> Tested-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Tested-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14vxlan: use htonl when snooping for loopback addressMike Rapoport
Currently "bridge fdb show dev vxlan0" lists loopback address as "1.0.0.127". Using htonl(INADDR_LOOPBACK) rather than passing it directly to vxlan_snoop fixes the problem. Signed-off-by: Mike Rapoport <mike.rapoport@ravellosystems.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12vxlan: fix some sparse warningsWei Yongjun
Fixes following warning: drivers/net/vxlan.c:406:6: warning: symbol 'vxlan_fdb_free' was not declared. Should it be static? drivers/net/vxlan.c:1111:37: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07vxlan: Bypass encapsulation if the destination is localSridhar Samudrala
This patch bypasses vxlan encapsulation if the destination vxlan endpoint is a local device. Changes since v1: added missing check for vxlan_find_vni() failure Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27VXLAN: Fix sparse warnings.Pravin B Shelar
Fixes following warning:- drivers/net/vxlan.c:471:35: warning: symbol 'dev' shadows an earlier one drivers/net/vxlan.c:433:26: originally declared here drivers/net/vxlan.c:794:34: warning: symbol 'vxlan' shadows an earlier one drivers/net/vxlan.c:757:26: originally declared here CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26VXLAN: Use IP Tunnels tunnel ENC encap APIPravin B Shelar
Use common ecn_encap functions from ip_tunnel module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26VXLAN: Fix vxlan stats handling.Pravin B Shelar
Fixes bug in VXLAN code where is iptunnel_xmit() called with NULL dev->tstats. This bug was introduced in commit 6aed0c8bf7d2f389b (tunnel: use iptunnel_xmit() again). Following patch fixes bug by setting dev->tstats. It uses ip_tunnel module code to share stats function. CC: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26GRE: Refactor GRE tunneling code.Pravin B Shelar
Following patch refactors GRE code into ip tunneling code and GRE specific code. Common tunneling code is moved to ip_tunnel module. ip_tunnel module is written as generic library which can be used by different tunneling implementations. ip_tunnel module contains following components: - packet xmit and rcv generic code. xmit flow looks like (gre_xmit/ipip_xmit)->ip_tunnel_xmit->ip_local_out. - hash table of all devices. - lookup for tunnel devices. - control plane operations like device create, destroy, ioctl, netlink operations code. - registration for tunneling modules, like gre, ipip etc. - define single pcpu_tstats dev->tstats. - struct tnl_ptk_info added to pass parsed tunnel packet parameters. ipip.h header is renamed to ip_tunnel.h Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-17vxlan: generalize forwarding tablesDavid Stevens
This patch generalizes VXLAN forwarding table entries allowing an administrator to: 1) specify multiple destinations for a given MAC 2) specify alternate vni's in the VXLAN header 3) specify alternate destination UDP ports 4) use multicast MAC addresses as fdb lookup keys 5) specify multicast destinations 6) specify the outgoing interface for forwarded packets The combination allows configuration of more complex topologies using VXLAN encapsulation. Changes since v1: rebase to 3.9.0-rc2 Signed-Off-By: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10tunnel: use iptunnel_xmit() againCong Wang
With recent patches from Pravin, most tunnels can't use iptunnel_xmit() any more, due to ip_select_ident() and skb->ip_summed. But we can just move these operations out of iptunnel_xmit(), so that tunnels can use it again. This by the way fixes a bug in vxlan (missing nf_reset()) for net-next. Cc: Pravin B Shelar <pshelar@nicira.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09VXLAN: Use UDP Tunnel segmention.Pravin B Shelar
Enable TSO for VXLAN devices and use UDP_TUNNEL to offload vxlan segmentation. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07vxlan: fix oops when delete netns containing vxlanZang MingJie
The following script will produce a kernel oops: sudo ip netns add v sudo ip netns exec v ip ad add 127.0.0.1/8 dev lo sudo ip netns exec v ip link set lo up sudo ip netns exec v ip ro add 224.0.0.0/4 dev lo sudo ip netns exec v ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev lo sudo ip netns exec v ip link set vxlan0 up sudo ip netns del v where inspect by gdb: Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 107] 0xffffffffa0289e33 in ?? () (gdb) bt #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 #1 vxlan_stop (dev=0xffff88001bafa000) at drivers/net/vxlan.c:1087 #2 0xffffffff812cc498 in __dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1299 #3 0xffffffff812cd920 in dev_close_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:1335 #4 0xffffffff812cef31 in rollback_registered_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:4851 #5 0xffffffff812cf040 in unregister_netdevice_many (head=head@entry=0xffff88001f2e7dc8) at net/core/dev.c:5752 #6 0xffffffff812cf1ba in default_device_exit_batch (net_list=0xffff88001f2e7e18) at net/core/dev.c:6170 #7 0xffffffff812cab27 in cleanup_net (work=<optimized out>) at net/core/net_namespace.c:302 #8 0xffffffff810540ef in process_one_work (worker=0xffff88001ba9ed40, work=0xffffffff8167d020) at kernel/workqueue.c:2157 #9 0xffffffff810549d0 in worker_thread (__worker=__worker@entry=0xffff88001ba9ed40) at kernel/workqueue.c:2276 #10 0xffffffff8105870c in kthread (_create=0xffff88001f2e5d68) at kernel/kthread.c:168 #11 <signal handler called> #12 0x0000000000000000 in ?? () #13 0x0000000000000000 in ?? () (gdb) fr 0 #0 vxlan_leave_group (dev=0xffff88001bafa000) at drivers/net/vxlan.c:533 533 struct sock *sk = vn->sock->sk; (gdb) l 528 static int vxlan_leave_group(struct net_device *dev) 529 { 530 struct vxlan_dev *vxlan = netdev_priv(dev); 531 struct vxlan_net *vn = net_generic(dev_net(dev), vxlan_net_id); 532 int err = 0; 533 struct sock *sk = vn->sock->sk; 534 struct ip_mreqn mreq = { 535 .imr_multiaddr.s_addr = vxlan->gaddr, 536 .imr_ifindex = vxlan->link, 537 }; (gdb) p vn->sock $4 = (struct socket *) 0x0 The kernel calls `vxlan_exit_net` when deleting the netns before shutting down vxlan interfaces. Later the removal of all vxlan interfaces, where `vn->sock` is already gone causes the oops. so we should manually shutdown all interfaces before deleting `vn->sock` as the patch does. Signed-off-by: Zang MingJie <zealot0630@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06reset nf before xmit vxlan encapsulated packetZang MingJie
We should reset nf settings bond to the skb as ipip/ipgre do. If not, the conntrack/nat info bond to the origin packet may continually redirect the packet to vxlan interface causing a routing loop. this is the scenario: VETP VXLAN Gateway /----\ /---------------\ | | | | | vx+--+vx --NAT-> eth0+--> Internet | | | | \----/ \---------------/ when there are any packet coming from internet to the vetp, there will be lots of garbage packets coming out the gateway's vxlan interface, but none actually sent to the physical interface, because they are redirected back to the vxlan interface in the postrouting chain of NAT rule, and dmesg complains: Mar 1 21:52:53 debian kernel: [ 8802.997699] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:54 debian kernel: [ 8804.004907] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:55 debian kernel: [ 8805.012189] Dead loop on virtual device vxlan0, fix it urgently! Mar 1 21:52:56 debian kernel: [ 8806.020593] Dead loop on virtual device vxlan0, fix it urgently! the patch should fix the problem Signed-off-by: Zang MingJie <zealot0630@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-25VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification.Pravin B Shelar
tunnel_ip_select_ident() is more efficient when generating ip-header id given inner packet is of ipv4 type. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13bridge: Add vlan support to static neighborsVlad Yasevich
When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30net/vxlan: Add ethtool drvinfoYan Burman
Implement ethtool get_drvinfo. Signed-off-by: Yan Burman <yanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03vxlan: allow live mac address changestephen hemminger
The VXLAN pseudo-device doesn't care if the mac address changes when device is up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-26net/vxlan: Use the underlying device index when joining/leaving multicast groupsYan Burman
The socket calls from vxlan to join/leave multicast group aren't using the index of the underlying device, as a result the stack uses the first interface that is up. This results in vxlan being non functional over a device which isn't the 1st to be up. Fix this by providing the iflink field to the vxlan instance to the multicast calls. Signed-off-by: Yan Burman <yanb@mellanox.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-09vxlan: Add capability of Rx checksum offload for inner packetJoseph Gasparakis
This patch adds capability in vxlan to identify received checksummed inner packets and signal them to the upper layers of the stack. The driver needs to set the skb->encapsulation bit and also set the skb->ip_summed to CHECKSUM_UNNECESSARY. Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-09vxlan: capture inner headers during encapsulationJoseph Gasparakis
Allow VXLAN to make use of Tx checksum offloading and Tx scatter-gather. The advantage to these two changes is that it also allows the VXLAN to make use of GSO. Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-20add DOVE extensions for VXLANDavid Stevens
This patch provides extensions to VXLAN for supporting Distributed Overlay Virtual Ethernet (DOVE) networks. The patch includes: + a dove flag per VXLAN device to enable DOVE extensions + ARP reduction, whereby a bridge-connected VXLAN tunnel endpoint answers ARP requests from the local bridge on behalf of remote DOVE clients + route short-circuiting (aka L3 switching). Known destination IP addresses use the corresponding destination MAC address for switching rather than going to a (possibly remote) router first. + netlink notification messages for forwarding table and L3 switching misses Changes since v2 - combined bools into "u32 flags" - replaced loop with !is_zero_ether_addr() Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17vxlan: remove unused variable.Rami Rosen
This patch removes addrexceeded member from vxlan_dev struct as it is unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor line offset auto-merges. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-14net: convert __IPTUNNEL_XMIT() to an inline functionAmerigo Wang
__IPTUNNEL_XMIT() is an ugly macro, convert it to a static inline function, so make it more readable. IPTUNNEL_XMIT() is unused, just remove it. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13vxlan: Update hard_header_len based on lowerdev when instantiating VXLANAlexander Duyck
In the event of a VXLAN device being linked to a device that has a hard_header_len greater than that of standard ethernet we could end up with the hard_header_len not being large enough for outgoing frames. In order to prevent this we should update the length when a lowerdev is provided. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13vxlan: fix a typo.Rami Rosen
Use eXtensible and not eXtensiable in the comment on top. Signed-off-by: Rami Rosen <ramirose@gmail.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13vxlan: Fix error that was resulting in VXLAN MTU size being 10 bytes too largeAlexander Duyck
This change fixes an issue I found where VXLAN frames were fragmented when they were up to the VXLAN MTU size. I root caused the issue to the fact that the headroom was 4 + 20 + 8 + 8. This math doesn't appear to be correct because we are not inserting a VLAN header, but instead a 2nd Ethernet header. As such the math for the overhead should be 20 + 8 + 8 + 14 to account for the extra headers that are inserted for VXLAN. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03vxlan: allow a user to set TTL valueVincent Bernat
"ip link add ... type vxlan ... ttl X" allows a user to set the TTL used by a VXLAN for encapsulation. The provided value was ignored by vxlan module and the default value of 1 was used when encapsulating multicast packets. Signed-off-by: Vincent Bernat <bernat@luffy.cx> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-31vxlan: don't expire permanent entriesstephen hemminger
VXLAN confused flag versus bitmap on state. Based on part of a earlier patch by David Stevens. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: fix oops when give unknown ifindexstephen hemminger
If vxlan is created and the ifindex is passed; there are two cases which are incorrectly handled by the existing code. The ifindex could be zero (i.e. no device) or there could be no device with that ifindex. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: fix receive checksum handlingstephen hemminger
Vxlan was trying to use postpull_rcsum to allow receive checksum offload to work on drivers using CHECKSUM_COMPLETE method. But this doesn't work correctly. Just force full receive checksum on received packet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: add additional headroomstephen hemminger
Tell upper layer protocols to allocate skb with additional headroom. This avoids allocation and copy in local packet sends. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: allow configuring port rangestephen hemminger
VXLAN bases source UDP port based on flow to help the receiver to be able to load balance based on outer header flow. This patch restricts the port range to the normal UDP local ports, and allows overriding via configuration. It also uses jhash of Ethernet header when looking at flows with out know L3 header. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: associate with tunnel socket on transmitstephen hemminger
When tunnelling a skb, associate it with the tunnel socket. This allows parameters set on tunnel socket (like multicast loop flag), to be picked up by ip_output. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: use ip_route_outputstephen hemminger
Select source address for VXLAN packet based on route destination and don't lie to route code. VXLAN is not GRE. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: fix byte order in hash functionstephen hemminger
Shift was wrong direction causing packets to hash based on other parts of the ethernet header, not the address. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-10vxlan: minor output refactoringstephen hemminger
Move code to find destination to a small function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 04:57:18 +0000