summaryrefslogtreecommitdiff
path: root/drivers/net/vmxnet3
AgeCommit message (Collapse)Author
2012-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/vmxnet3/vmxnet3_drv.c Small vmxnet3 conflict with header size bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04vmxnet3: Fix log messages and corrects some typosShreyas Bhatewara
Fix log messages and corrects some typos Change logging of failure to enable MSI/MSI-X to display device's PCI address instead of eth%d. Rectify a typo. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Reviewed-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-01vmxnet3: Fix transport header sizeShreyas Bhatewara
Fix transport header size Fix the transpoert header size for UDP packets. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19vmxnet3: cap copy length at size of skb to prevent dropped frames on txNeil Horman
I was recently shown that vmxnet3 devices on transmit, will drop very small udp frames consistently. This is due to a regression introduced by commit 39d4a96fd7d2926e46151adbd18b810aeeea8ec0. This commit attempts to introduce an optimization to the tx path, indicating that the underlying hardware behaves optimally when at least 54 bytes of header data are available for direct access. This causes problems however, if the entire frame is less than 54 bytes long. The subsequent pskb_may_pull in vmxnet3_parse_and_copy_hdr fails, causing an error return code, which leads to vmxnet3_tq_xmit dropping the frame. Fix it by placing a cap on the copy length. For frames longer than 54 bytes, we do the pull as we normally would. If the frame is shorter than that, copy the whole frame, but no more. This ensures that we still get the optimization for qualifying frames, but don't do any damange for frames that are too short. Also, since I'm unable to do this, it wuold be great if vmware could follow up this patch with some additional code commentary as to why 54 bytes is an optimal pull length for a virtual NIC driver. The comment that introduced this was vague on that. Thanks! Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Max Matveev <mmatveev@redhat.com> CC: Max Matveev <mmatveev@redhat.com> CC: "David S. Miller" <davem@davemloft.net> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-01vmxnet3: Fix typo in vmxnet3_drv.cMasanari Iida
Correct spelling in "uncommited" to "uncommitted" in drivers/net/vmxnet3/vmxnet3_drv.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove unnecessary k.alloc/v.alloc OOM messagesJoe Perches
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-25vmxnet3: cleanup tso headers manipulationEric Dumazet
Use existing helpers to clarify skb headers manipulation. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05vmxnet3" make ethtool ops conststephen hemminger
All tables of function pointers should be const to make hacks more difficult. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16ethtool: Define and apply a default policy for RX flow hash indirectionBen Hutchings
All drivers that support modification of the RX flow hash indirection table initialise it in the same way: RX rings are assigned to table entries in rotation. Make that default policy explicit by having them call a ethtool_rxfh_indir_default() function. In the ethtool core, add support for a zero size value for ETHTOOL_SRXFHINDIR, which resets the table to this default. Partly-suggested-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16ethtool: Centralise validation of ETHTOOL_{G, S}RXFHINDIR parametersBen Hutchings
Add a new ethtool operation (get_rxfh_indir_size) to get the indirectional table size. Use this to validate the user buffer size before calling get_rxfh_indir or set_rxfh_indir. Use get_rxnfc to get the number of RX rings, and validate the contents of the new indirection table before calling set_rxfh_indir. Remove this validation from drivers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22Sweep away N/A fw_version dustbunnies from the .get_drvinfo routine of a ↵Rick Jones
number of drivers Per discussion with Ben Hutchings and David Miller, go through and remove assignments of "N/A" to fw_version in various drivers' .get_drvinfo routines. While there clean-up some use of bare constants and such. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31drivers/net: Add module.h to drivers who were implicitly using itPaul Gortmaker
The device.h header was including module.h, making it present for most of these drivers. But we want to clean that up. Call out the include of module.h in the modular network drivers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13vmxnet3: fix skb truesize underestimationEric Dumazet
vmxnet3 allocates a page per skb fragment. We must account PAGE_SIZE increments on skb->truesize, not the actual frag length. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06net: use DMA_x_DEVICE and dma_mapping_error with skb_frag_dma_mapIan Campbell
When I converted some drivers from pci_map_page to skb_frag_dma_map I neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and pci_dma_mapping_error into dma_mapping_error. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22vmxnet3: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16ethtool: Clean up definitions of rule location arrays in RX NFCBen Hutchings
Correct the description of ethtool_rxnfc::rule_locs; it is an array of currently used locations, not all possible valid locations. Add note that drivers must not use ethtool_rxnfc::rule_locs. The rule_locs argument to ethtool_ops::get_rxnfc is either NULL or a pointer to an array of u32, so change the parameter type accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-13vmxnet3: Don't enable vlan filters in promiscuous mode.Jesse Gross
The vmxnet3 driver enables vlan filters if filtering is enabled for any vlan. In promiscuous mode the filter table is cleared to in order to disable filtering. However, if a vlan device is subsequently created that vlan will be added to the filter, re-engaging it. As a result, not only do we not see all the vlans in promiscuous mode, we don't even see vlans for which a filter was previously created. CC: Scott J. Goldman <scottjg@vmware.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21vmxnet3: fix publicity of NETIF_F_HIGHDMAShreyas Bhatewara
NETIF_F_HIGHDMA is being disabled even when dma64 is true. This patch fixes it. CC: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21vmxnet3: set netdev parant device before calling netdev_infoShreyas Bhatewara
Parent device for netdev should be set before netdev_info() can be called otherwise there is a NULL pointer dereference and probe() fails. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com>-- Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/bluetooth/l2cap_core.c
2011-07-07vmxnet3: round down # of queues to power of twoShreyas Bhatewara
vmxnet3 device supports only power-of-two number of queues. The driver therefore needs to check this and rounds down the number of queues to the nearest power of two. Signed-off-by: Yong Wang <yongwang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Reviewed-by: Dmitry Torokhov <dtor@vmware.com>
2011-07-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-05vmxnet3: fix starving rx ring whenoc_skb kb failsShreyas Bhatewara
If the rx ring is completely empty, then the device may never fire an rx interrupt. Unfortunately, the rx interrupt is what triggers populating the rx ring with fresh buffers, so this will cause networking to lock up. This patch replenishes the skb in recv descriptor as soon as it is peeled off while processing rx completions. If the skb/buffer allocation fails, existing one is recycled and the packet in hand is dropped. This way none of the RX desc is ever left empty, thus avoiding starvation Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27vmxnet3: Enable GRO support.Jesse Gross
When receiving packets from another guest on the same hypervisor, it's generally possible to receive large packets because no segmentation is necessary and these packets are handled by LRO. However, when doing routing or bridging we must disable LRO and lose this benefit. In these cases GRO can still be used and it is very effective because the packets which are segmented in the hypervisor are received very close together and can easily be merged. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: Scott Goldman <scottjg@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-27vmxnet3: Convert to new vlan model.Jesse Gross
This converts the vmxnet3 driver to use the new vlan model. In doing so it fixes missing tags in tcpdump and failure to do checksum offload when tx vlan offload is disabled. CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: VMware PV-Drivers <pv-drivers@vmware.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-13vmxnet3: remove unused variableNeil Horman
While doing some backporting I noticed that vmxnet3 had a variable that was set but never used. Get rid of it, and stop the compiler from griping Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@conan.davemloft.net>
2011-06-08vmxnet3: convert to 64 bit stats interfacestephen hemminger
Convert vmxnet3 driver to 64 bit statistics interface. This driver was already counting packet per queue in a 64 bit value so not a huge change. Eliminate unused old net_device_stats structure. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/vmxnet3/vmxnet3_ethtool.c net/core/dev.c
2011-05-16vmxnet3: Fix inconsistent LRO state after initializationThomas Jarosch
During initialization of vmxnet3, the state of LRO gets out of sync with netdev->features. This leads to very poor TCP performance in a IP forwarding setup and is hitting many VMware users. Simplified call sequence: 1. vmxnet3_declare_features() initializes "adapter->lro" to true. 2. The kernel automatically disables LRO if IP forwarding is enabled, so vmxnet3_set_flags() gets called. This also updates netdev->features. 3. Now vmxnet3_setup_driver_shared() is called. "adapter->lro" is still set to true and LRO gets enabled again, even though netdev->features shows it's disabled. Fix it by updating "adapter->lro", too. The private vmxnet3 adapter flags are scheduled for removal in net-next, see commit a0d2730c9571aeba793cb5d3009094ee1d8fda35 "net: vmxnet3: convert to hw_features". Patch applies to 2.6.37 / 2.6.38 and 2.6.39-rc6. Please CC: comments. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12vmxnet3: Use single tx queue when CONFIG_PCI_MSI not definedShreyas Bhatewara
Resending this patch with few changes. Avoid multiple queues when MSI or MSI-X not available Limit number of Tx queues to 1 if MSI/MSI-X support is not configured in the kernel. This will make number of tx and rx queues equal when MSI/X is not configured thus providing better performance. Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6 Conflicts: drivers/net/benet/be_main.c
2011-05-06vmxnet3: Consistently disable irqs when taking adapter->cmd_lockRoland Dreier
Using the vmxnet3 driver produces a lockdep warning because vmxnet3_set_mc(), which is called with mc->mca_lock held, takes adapter->cmd_lock. However, there are a couple of places where adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a softirq that tries to take mc->mca_lock could happen while adapter->cmd_lock is held, leading to an AB-BA deadlock. I'm not sure if this is a real potential deadlock or not, but the simplest and best fix seems to be simply to make sure we take cmd_lock with spin_lock_irqsave() everywhere -- the places with plain spin_lock just look like oversights. The full enormous lockdep warning is: ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.39-rc6+ #1 --------------------------------------------------------- ifconfig/567 just changed the state of lock: (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 but this lock took another, SOFTIRQ-unsafe lock in the past: (&(&adapter->cmd_lock)->rlock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: 4 locks held by ifconfig/567: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20 #1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0 #2: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0 #3: (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280 the shortest dependencies between 2nd lock and 1st lock: -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b SOFTIRQ-ON-W at: [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3] ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3] [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0 [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50 [<ffffffff81470127>] __dev_open+0xc7/0x100 [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180 [<ffffffff81470568>] dev_change_flags+0x28/0x70 [<ffffffff814da960>] devinet_ioctl+0x730/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (_xmit_ETHER){+.....} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0 ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 IN-SOFTIRQ-W at: [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 } ... key at: [<ffffffff82801be2>] __key.40877+0x0/0x8 ... acquired at: [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b stack backtrace: Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1 Call Trace: <IRQ> [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170 [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170 [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400 [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10 [<ffffffff81012255>] ? native_sched_clock+0x15/0x70 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0 [<ffffffff810122b9>] ? sched_clock+0x9/0x10 [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13 [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff8108a3af>] ? local_clock+0x6f/0x80 [<ffffffff81575898>] ? do_page_fault+0x268/0x560 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff8117737e>] ? fget_light+0x33e/0x430 [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: Scott J. Goldman <scottjg@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-29ethtool: cosmetic: Use ethtool ethtool_cmd_speed APIDavid Decotigny
This updates the network drivers so that they don't access the ethtool_cmd::speed field directly, but use ethtool_cmd_speed() instead. For most of the drivers, these changes are purely cosmetic and don't fix any problem, such as for those 1GbE/10GbE drivers that indirectly call their own ethtool get_settings()/mii_ethtool_gset(). The changes are meant to enforce code consistency and provide robustness with future larger throughputs, at the expense of a few CPU cycles for each ethtool operation. All drivers compiled with make allyesconfig ion x86_64 have been updated. Tested: make allyesconfig on x86_64 + e1000e/bnx2x work Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18net: vmxnet3: convert to hw_featuresMichał Mirosław
This also removes private feature flags that were always set to true. You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following cleanup. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-27net: fix ethtool->set_flags not intended -EINVAL return valueStanislaw Gruszka
After commit d5dbda23804156ae6f35025ade5307a49d1db6d7 "ethtool: Add support for vlan accleration.", drivers that have NETIF_F_HW_VLAN_TX, and/or NETIF_F_HW_VLAN_RX feature, but do not allow enable/disable vlan acceleration via ethtool set_flags, always return -EINVAL from that function. Fix by returning -EINVAL only if requested features do not match current settings and can not be changed by driver. Change any driver that define ethtool->set_flags to use ethtool_invalid_flags() to avoid similar problems in the future (also on drivers that do not have the problem). Tested with modified (to reproduce this bug) myri10ge driver. Cc: stable@kernel.org # 2.6.37+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Dont allocate extra MSI-x vectorsShreyas Bhatewara
In case of single tx and rx queues, three MSI-x vectors are allocated instead of two. This patch fixes that. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Add locking for access to command registerShreyas Bhatewara
Access to cmd register is racey, especially in smp environments. Protect it using a spinlock. Signed-off-by: Matthieu Bucchianeri <matthieu@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Disable napi in suspend, reenable in resume.Shreyas Bhatewara
There is a small possibility of a race where the suspend routine gets called, while a napi callback is still pending and when that comes up, it enables interrupts which just got disabled in the suspend routine. This change adds napi disable call in suspend and enable in resume to avoid race. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Make ethtool handlers multiqueue awareShreyas Bhatewara
Show per-queue stats in ethtool -S output for vmxnet3 interface. Register dump of ethtool should dump registers for all tx and rx queues. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Provide required number of bytes in first SG bufferShreyas Bhatewara
This is a performance enhancement fix. vmxnet3 device performs better when provided with at least 54 bytes (ethernet 14 + IP 20+ TCP 20) in the first SG buffer. For UDP packets driver provides lesser than that in first sg. This change fixes the same. Also avoid the redundant pskb_may_pull() call. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Enable HW Rx VLAN stripping by defaultShreyas Bhatewara
Make hw vlan tag stripping as enabled by default. Thereby remove the code to conditionally enable it later. Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-15vmxnet3: Preserve the MAC address configured by ifconfigShreyas Bhatewara
While activating the device get it's MAC address from netdev. This will allow the MAC address configured using ifconfig to persist through the reset. Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>