summaryrefslogtreecommitdiff
path: root/drivers/net/vmxnet3
AgeCommit message (Collapse)Author
2015-06-23vmxnet3: Changes for vmxnet3 adapter version 2 (fwd)Shreyas Bhatewara
Make the driver understand adapter version 2. Cc: Rachel Lunnon <rachel_lunnon@stormagic.com> Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23vmxnet3: Fix memory leaks in rx path (fwd)Shreyas Bhatewara
If rcd length was zero, the page used for frag was not being released. It was being replaced with a newly allocated page. This change takes care of that memory leak. Signed-off-by: Guolin Yang <gyang@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23vmxnet3: Register shutdown handler for device (fwd)Shreyas Bhatewara
Implement a handler for pci shutdown so that the driver has an opportunity to make sure that device is quiesced before the PCI switches to legacy IRQs. This way the possibility of "screaming interrupt" is avoided. Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-01vmxnet3: spelling fixesstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01Driver: Vmxnet3: Copy TCP header to mapped frame for IPv6 packetsShrikrishna Khare
Allows for packet parsing to be done by the fast path. This performance optimization already exists for IPv4. Add similar logic for IPv6. Signed-off-by: Amitabha Banerjee <banerjeea@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-08Driver: Vmxnet3: Change the hex constant to its decimal equivalentShrikrishna Khare
The hex constant chosen for VMXNET3_REV1_MAGIC is offensive, replace it with its decimal equivalent. Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Reviewed-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-16Driver: Vmxnet3: Fix ethtool -S to return correct rx queue statsShrikrishna Khare
Signed-off-by: Gao Zhenyu <gzhenyu@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12Driver: Vmxnet3: Reinitialize vmxnet3 backend on wakeup from hibernateShrikrishna Khare
Failing to reinitialize on wakeup results in loss of network connectivity for vmxnet3 interface. Signed-off-by: Srividya Murali <smurali@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06Driver: Vmxnet3: Make Rx ring 2 size configurableShrikrishna Khare
Rx ring 2 size can be configured by adjusting rx-jumbo parameter of ethtool -G. Signed-off-by: Ramya Bolla <bollar@vmware.com> Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08ethtool: Support for configurable RSS hash functionEyal Perry
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ariel Elior <ariel.elior@qlogic.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Subbu Seetharaman <subbu.seetharaman@emulex.com> Cc: Ajit Khaparde <ajit.khaparde@emulex.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Matthew Vick <matthew.vick@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Mitch Williams <mitch.a.williams@intel.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Solarflare linux maintainers <linux-net-drivers@solarflare.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-16vmxnet3: use netdev_rss_key_fill() helperEric Dumazet
Use of well known RSS key increases attack surface. Switch to a random one, using generic helper so that all ports share a common key. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09Merge tag 'pci-v3.18-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "The interesting things here are: - Turn on Config Request Retry Status Software Visibility. This caused hangs last time, but we included a fix this time. - Rework PCI device configuration to use _HPP/_HPX more aggressively - Allow PCI devices to be put into D3cold during system suspend - Add arm64 PCI support - Add APM X-Gene host bridge driver - Add TI Keystone host bridge driver - Add Xilinx AXI host bridge driver More detailed summary: Enumeration - Check Vendor ID only for Config Request Retry Status (Rajat Jain) - Enable Config Request Retry Status when supported (Rajat Jain) - Add generic domain handling (Catalin Marinas) - Generate uppercase hex for modalias interface class (Ricardo Ribalda Delgado) Resource management - Add missing MEM_64 mask in pci_assign_unassigned_bridge_resources() (Yinghai Lu) - Increase IBM ipr SAS Crocodile BARs to at least system page size (Douglas Lehr) PCI device hotplug - Prevent NULL dereference during pciehp probe (Andreas Noever) - Move _HPP & _HPX handling into core (Bjorn Helgaas) - Apply _HPP to PCIe devices as well as PCI (Bjorn Helgaas) - Apply _HPP/_HPX to display devices (Bjorn Helgaas) - Preserve SERR & PARITY settings when applying _HPP/_HPX (Bjorn Helgaas) - Preserve MPS and MRRS settings when applying _HPP/_HPX (Bjorn Helgaas) - Apply _HPP/_HPX to all devices, not just hot-added ones (Bjorn Helgaas) - Fix wait time in pciehp timeout message (Yinghai Lu) - Add more pciehp Slot Control debug output (Yinghai Lu) - Stop disabling pciehp notifications during init (Yinghai Lu) MSI - Remove arch_msi_check_device() (Alexander Gordeev) - Rename pci_msi_check_device() to pci_msi_supported() (Alexander Gordeev) - Move D0 check into pci_msi_check_device() (Alexander Gordeev) - Remove unused kobject from struct msi_desc (Yijing Wang) - Remove "pos" from the struct msi_desc msi_attrib (Yijing Wang) - Add "msi_bus" sysfs MSI/MSI-X control for endpoints (Yijing Wang) - Use __get_cached_msi_msg() instead of get_cached_msi_msg() (Yijing Wang) - Use __read_msi_msg() instead of read_msi_msg() (Yijing Wang) - Use __write_msi_msg() instead of write_msi_msg() (Yijing Wang) Power management - Drop unused runtime PM support code for PCIe ports (Rafael J. Wysocki) - Allow PCI devices to be put into D3cold during system suspend (Rafael J. Wysocki) AER - Add additional AER error strings (Gong Chen) - Make <linux/aer.h> standalone includable (Thierry Reding) Virtualization - Add ACS quirk for Solarflare SFC9120 & SFC9140 (Alex Williamson) - Add ACS quirk for Intel 10G NICs (Alex Williamson) - Add ACS quirk for AMD A88X southbridge (Marti Raudsepp) - Remove unused pci_find_upstream_pcie_bridge(), pci_get_dma_source() (Alex Williamson) - Add device flag helpers (Ethan Zhao) - Assume all Mellanox devices have broken INTx masking (Gavin Shan) Generic host bridge driver - Fix ioport_map() for !CONFIG_GENERIC_IOMAP (Liviu Dudau) - Add pci_register_io_range() and pci_pio_to_address() (Liviu Dudau) - Define PCI_IOBASE as the base of virtual PCI IO space (Liviu Dudau) - Fix the conversion of IO ranges into IO resources (Liviu Dudau) - Add pci_get_new_domain_nr() and of_get_pci_domain_nr() (Liviu Dudau) - Add support for parsing PCI host bridge resources from DT (Liviu Dudau) - Add pci_remap_iospace() to map bus I/O resources (Liviu Dudau) - Add arm64 architectural support for PCI (Liviu Dudau) APM X-Gene - Add APM X-Gene PCIe driver (Tanmay Inamdar) - Add arm64 DT APM X-Gene PCIe device tree nodes (Tanmay Inamdar) Freescale i.MX6 - Probe in module_init(), not fs_initcall() (Lucas Stach) - Delay enabling reference clock for SS until it stabilizes (Tim Harvey) Marvell MVEBU - Fix uninitialized variable in mvebu_get_tgt_attr() (Thomas Petazzoni) NVIDIA Tegra - Make sure the PCIe PLL is really reset (Eric Yuen) - Add error path tegra_msi_teardown_irq() cleanup (Jisheng Zhang) - Fix extended configuration space mapping (Peter Daifuku) - Implement resource hierarchy (Thierry Reding) - Clear CLKREQ# enable on port disable (Thierry Reding) - Add Tegra124 support (Thierry Reding) ST Microelectronics SPEAr13xx - Pass config resource through reg property (Pratyush Anand) Synopsys DesignWare - Use NULL instead of false (Fabio Estevam) - Parse bus-range property from devicetree (Lucas Stach) - Use pci_create_root_bus() instead of pci_scan_root_bus() (Lucas Stach) - Remove pci_assign_unassigned_resources() (Lucas Stach) - Check private_data validity in single place (Lucas Stach) - Setup and clear exactly one MSI at a time (Lucas Stach) - Remove open-coded bitmap operations (Lucas Stach) - Fix configuration base address when using 'reg' (Minghuan Lian) - Fix IO resource end address calculation (Minghuan Lian) - Rename get_msi_data() to get_msi_addr() (Minghuan Lian) - Add get_msi_data() to pcie_host_ops (Minghuan Lian) - Add support for v3.65 hardware (Murali Karicheri) - Fold struct pcie_port_info into struct pcie_port (Pratyush Anand) TI Keystone - Add TI Keystone PCIe driver (Murali Karicheri) - Limit MRSS for all downstream devices (Murali Karicheri) - Assume controller is already in RC mode (Murali Karicheri) - Set device ID based on SoC to support multiple ports (Murali Karicheri) Xilinx AXI - Add Xilinx AXI PCIe driver (Srikanth Thokala) - Fix xilinx_pcie_assign_msi() return value test (Dan Carpenter) Miscellaneous - Clean up whitespace (Quentin Lambert) - Remove assignments from "if" conditions (Quentin Lambert) - Move PCI_VENDOR_ID_VMWARE to pci_ids.h (Francesco Ruggeri) - x86: Mark DMI tables as initialization data (Mathias Krause) - x86: Move __init annotation to the correct place (Mathias Krause) - x86: Mark constants of pci_mmcfg_nvidia_mcp55() as __initconst (Mathias Krause) - x86: Constify pci_mmcfg_probes[] array (Mathias Krause) - x86: Mark PCI BIOS initialization code as such (Mathias Krause) - Parenthesize PCI_DEVID and PCI_VPD_LRDT_ID parameters (Megan Kamiya) - Remove unnecessary variable in pci_add_dynid() (Tobias Klauser)" * tag 'pci-v3.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (109 commits) arm64: dts: Add APM X-Gene PCIe device tree nodes PCI: Add ACS quirk for AMD A88X southbridge devices PCI: xgene: Add APM X-Gene PCIe driver PCI: designware: Remove open-coded bitmap operations PCI/MSI: Remove unnecessary temporary variable PCI/MSI: Use __write_msi_msg() instead of write_msi_msg() MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() PCI/MSI: Use __get_cached_msi_msg() instead of get_cached_msi_msg() PCI/MSI: Add "msi_bus" sysfs MSI/MSI-X control for endpoints PCI/MSI: Remove "pos" from the struct msi_desc msi_attrib PCI/MSI: Remove unused kobject from struct msi_desc PCI/MSI: Rename pci_msi_check_device() to pci_msi_supported() PCI/MSI: Move D0 check into pci_msi_check_device() PCI/MSI: Remove arch_msi_check_device() irqchip: armada-370-xp: Remove arch_msi_check_device() PCI/MSI/PPC: Remove arch_msi_check_device() arm64: Add architectural support for PCI PCI: Add pci_remap_iospace() to map bus I/O resources of/pci: Add support for parsing PCI host bridge resources from DT of/pci: Add pci_get_new_domain_nr() and of_get_pci_domain_nr() ... Conflicts: arch/arm64/boot/dts/apm-storm.dtsi
2014-09-24PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.hFrancesco Ruggeri
Move PCI_VENDOR_ID_VMWARE from device-specific files to pci_ids.h. It is useful to always have access to it, especially when accessing subsystem_vendor_id on emulated devices. [bhelgaas: keep pci_ids.h sorted and use lower-case hex] Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-05VMXNET3: Check for map error in vmxnet3_set_mcAndy King
We should check if the map of the table actually succeeds, and also free resources accordingly. Version bumped to 1.2.1.0 Acked-by: Shelley Gong <shelleygong@vmware.com> Acked-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-06vmxnet3: fix decimal printf format specifiers prefixed with 0xHans Wennborg
The prefix suggests the number should be printed in hex, so use the %x specifier to do that. Found by using regex suggested by Joe Perches. Signed-off-by: Hans Wennborg <hans@hanshq.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-16vmxnet3: adjust ring sizes when interface is downNeil Horman
If ethtool is used to update ring sizes on a vmxnet3 interface that isn't running, the change isn't stored, meaning the ring update is effectively is ignored and lost without any indication to the user. Other network drivers store the ring size update so that ring allocation uses the new sizes next time the interface is brought up. This patch modifies vmxnet3 to behave this way as well Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03ethtool: Replace ethtool_ops::{get,set}_rxfh_indir() with {get,set}_rxfh()Ben Hutchings
ETHTOOL_{G,S}RXFHINDIR and ETHTOOL_{G,S}RSSH should work for drivers regardless of whether they expose the hash key, unless you try to set a hash key for a driver that doesn't expose it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24vmxnet3: Call dev_kfree_skb_any instead of dev_kfree_skb.Eric W. Biederman
Replace dev_kfree_skb with dev_kfree_skb_any in vmnet3_tx_xmit which can be called in hard irq and other contexts. vmnet3_tx_xmit only frees skbs that it has dropped. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/r8152.c drivers/net/xen-netback/netback.c Both the r8152 and netback conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-13vmxnet3: fix building without CONFIG_PCI_MSIArnd Bergmann
Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11vmxnet3: fix netpoll race conditionNeil Horman
vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> CC: stable@vger.kernel.org Reviewed-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18vmxnet3: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: pv-drivers@vmware.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18vmxnet3: Fix MSI-X/MSI enablement codeAlexander Gordeev
This update cleans up the MSI-X/MSI enablement code, fixes vmxnet3_acquire_msix_vectors() invalid return values and enables a dead code in case VMXNET3_LINUX_MIN_MSIX_VECT MSI-X vectors were allocated. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: pv-drivers@vmware.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26vmxnet3: use initialized skb pointer to set hashMichal Schmidt
The recent conversion to skb_set_hash() was incorrect. 'skb' is uninitialized at this point. Fixes: 0b6807034791 ('net: vmxnet3 calls skb_set_hash') Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18net: vmxnet3 calls skb_set_hashTom Herbert
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10net: vmxnet3: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Acked-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24vmxnet3: Remove extern from function prototypesJoe Perches
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com>
2013-08-27VMXNET3: Add support for virtual IOMMUAndy King
This patch adds support for virtual IOMMU to the vmxnet3 module. We switch to DMA consistent mappings for anything we pass to the device. There were a few places where we already did this, but using pci_blah(); these have been fixed to use dma_blah(), along with all new occurrences where we've replaced kmalloc() and friends. Also fix two small bugs: 1) use after free of rq->buf_info in vmxnet3_rq_destroy() 2) a cpu_to_le32() that should have been a cpu_to_le64() Acked-by: George Zhang <georgezhang@vmware.com> Acked-by: Aditya Sarwade <asarwade@vmware.com> Signed-off-by: Andy King <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07vmxnet3: prevent div-by-zero panic when ring resizing uninitialized devBhavesh Davda
Linux is free to call ethtool ops as soon as a netdev exists when probe finishes. However, we only allocate vmxnet3 tx/rx queues and initialize the rx_buf_per_pkt field in struct vmxnet3_adapter when the interface is opened (UP). Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-24vmxnet3: fix ethtool ring buffer size settingNeil Horman
Noticed that vmxnet3's get_ringparam function was returning the summation of all ring buffers on a NIC, rather than just the size of any one ring. This causes problems when a vmxnet3 instance has multiple queues, as ethtool, when setting ring parameters, first gets the current ring parameters to set the existing values in the set_ringparm commannd. The result is, that unless both rx and tx ring sizes are set in a single operation, which ever ring is not set will silently have its ring count multiplied by the number of queues on the NIC until it reaches a driver defined maxiumum value. Fix it by not multiplying the rx and tx ring sizes by the number of queues in the system, like every other driver. Tested by myself successfully. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Shreyas Bhatewara <sbhatewara@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-24vmxnet3: make local function staticstephen hemminger
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/e1000e/ethtool.c drivers/net/vmxnet3/vmxnet3_drv.c drivers/net/wireless/iwlwifi/dvm/tx.c net/ipv6/route.c The ipv6 route.c conflict is simple, just ignore the 'net' side change as we fixed the same problem in 'net-next' by eliminating cached neighbours from ipv6 routes. The e1000e conflict is an addition of a new statistic in the ethtool code, trivial. The vmxnet3 conflict is about one change in 'net' removing a guarding conditional, whilst in 'net-next' we had a netdev_info() conversion. The iwlwifi conflict is dealing with a WARN_ON() conversion in 'net-next' vs. a revert happening in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-29vmxnet3: set carrier state properly on probeNeil Horman
vmxnet3 fails to set netif_carrier_off on probe, meaning that when an interface is opened the __LINK_STATE_NOCARRIER bit is already cleared, and so /sys/class/net/<ifname>/operstate remains in the unknown state. Correct this by setting netif_carrier_off on probe, like other drivers do. Also, while we're at it, lets remove the netif_carrier_ok checks from the link_state_update function, as that check is atomically contained within the netif_carrier_[on|off] functions anyway Tested successfully by myself Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: better RSS supportStephen Hemminger
The VMXNET3 device provides RSS hash value for received packets, but it is not being used. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use static RSS keyStephen Hemminger
Rather than generating a different RSS key on each boot, just use a predetermined value that will map same flow to same value on every device for more predictable testing. This is already done on most hardware drivers. Initial key value just some arbitrary bits extracted once from /dev/random. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove unused irq_share_modeStephen Hemminger
This static variable is never set, it initializes to 0 which is VMXNET3_INTR_BUDDYSHARE, and never changes. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove device counterStephen Hemminger
An atomic counter of devices present is maintained but never used. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove VMXNET3_MAX_DEVICESStephen Hemminger
Defined but never used. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use netdev_ printk wrappersStephen Hemminger
Use the standard netdev_xxx() and dev_xxx() wrappers to format log messages. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: use netdev_dbgStephen Hemminger
Use netdev_dbg() rather than dev_dbg() because the former prints the device name which is more useful than the pci name. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: fix messages printed before registrationStephen Hemminger
This messages that occur during boot time from this device when netdev_err is called before calling register_netdevice(). Switch to using dev_XXX macros which correlate message with PCI info which is available. Rather than fixing the features message, just remove it since the information is redundant and available through ethtool. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-16vmxnet3: remove unnecessary bookkeepingStephen Hemminger
The uncommitted[] array was set but never used except in a debug message. Remove it. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>