summaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)Author
2016-06-14r8152: save the speedhayeswang
The user may change the speed. Use it to replace the default one. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14r8152: move the setting for the default speedhayeswang
Move calling set_speed() from open() to rtl_hw_phy_work_func_t(). Then, we would set the default speed only for first initialization or after resuming. Besides, the set_speed() could handle the flag of PHY_RESET which would be set in rtl_ops.hw_phy_cfg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14r8152: move the settings of PHY to a work queuehayeswang
Move the settings of PHY to a work queue and schedule it after rtl_ops.init(). There are some reasons for this. First, the settings are only needed for the first time initialization or after the power down occurs. Second, the settings are independent with the others. Last, the settings may take more time than the others. Leave they in probe() or open() may delay the following flows. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09r8152: replace netdev_alloc_skb_ip_align with napi_alloc_skbhayeswang
Replace netdev_alloc_skb_ip_align() with napi_alloc_skb() which can save several CPU cycles by avoiding having to disable and re-enable IRQs. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-31usbnet: smsc95xx: fix link detection for disabled autonegotiationChristoph Fritz
To detect link status up/down for connections where autonegotiation is explicitly disabled, we don't get an irq but need to poll the status register for link up/down detection. This patch adds a workqueue to poll for link status. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-23net: pegasus: simplify logical constraintxypron.glpk@gmx.de
If !count is true, count < 4 is also true. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20Merge tag 'tty-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here's the large TTY and Serial driver update for 4.7-rc1. A few new serial drivers are added here, and Peter has fixed a bunch of long-standing bugs in the tty layer and serial drivers as normal. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits) MAINTAINERS: 8250: remove website reference serial: core: Fix port mutex assert if lockdep disabled serial: 8250_dw: fix wrong logic in dw8250_check_lcr() tty: vt, finish looping on duplicate tty: vt, return error when con_startup fails QE-UART: add "fsl,t1040-ucc-uart" to of_device_id serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios serial: 8250dw: Add device HID for future AMD UART controller Fix OpenSSH pty regression on close serial: mctrl_gpio: add IRQ locking serial: 8250: Integrate Fintek into 8250_base serial: mps2-uart: add support for early console serial: mps2-uart: add MPS2 UART driver dt-bindings: document the MPS2 UART bindings serial: sirf: Use generic uart-has-rtscts DT property serial: sirf: Introduce helper variable struct device_node *np serial: mxs-auart: Use generic uart-has-rtscts DT property serial: imx: Use generic uart-has-rtscts DT property doc: DT: Add Generic Serial Device Tree Bindings serial: 8250: of: Make tegra_serial_handle_break() static ...
2016-05-20net: usb: ch9200: use kmemdupMuhammad Falak R Wani
Use kmemdup when some other buffer is immediately copied into allocated region. It replaces call to allocation followed by memcpy, by a single call to kmemdup. Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20net: cdc_ncm: update datagram size after changing mtuRafal Redzimski
Current implementation updates the mtu size and notify cdc_ncm device using USB_CDC_SET_MAX_DATAGRAM_SIZE request about datagram size change instead of changing rx_urb_size. Whenever mtu is being changed, datagram size should also be updated. Also updating maxmtu formula so it takes max_datagram_size with use of cdc_ncm_max_dgram_size() and not ctx. Signed-off-by: Robert Dobrowolski <robert.dobrowolski@linux.intel.com> Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19Revert "net: pegasus: remove dead coding"David S. Miller
This reverts commit e00be9e4d0ffcc0121606229f0aa4b246d6881d7. It causes warnings and has several problems. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-19net: pegasus: remove dead codingxypron.glpk@gmx.de
(!count || count < 4) is always true. So let's remove the coding which is dead at least since 2005. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17asix: Fix offset calculation in asix_rx_fixup() causing slow transmissionsJohn Stultz
In testing with HiKey, we found that since commit 3f30b158eba5 ("asix: On RX avoid creating bad Ethernet frames"), we're seeing lots of noise during network transfers: [ 239.027993] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988 [ 239.037310] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x54ebb5ec, offset 4 [ 239.045519] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xcdffe7a2, offset 4 [ 239.275044] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988 [ 239.284355] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x1d36f59d, offset 4 [ 239.292541] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0xaef3c1e9, offset 4 [ 239.518996] asix 1-1.1:1.0 eth0: asix_rx_fixup() Data Header synchronisation was lost, remaining 988 [ 239.528300] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x2881912, offset 4 [ 239.536413] asix 1-1.1:1.0 eth0: asix_rx_fixup() Bad Header Length 0x5638f7e2, offset 4 And network throughput ends up being pretty bursty and slow with a overall throughput of at best ~30kB/s (where as previously we got 1.1MB/s with the slower USB1.1 "full speed" host). We found the issue also was reproducible on a x86_64 system, using a "high-speed" USB2.0 port but the throughput did not measurably drop (possibly due to the scp transfer being cpu bound on my slow test hardware). After lots of debugging, I found the check added in the problematic commit seems to be calculating the offset incorrectly. In the normal case, in the main loop of the function, we do: (where offset is zero, or set to "offset += (copy_length + 1) & 0xfffe" in the previous loop) rx->header = get_unaligned_le32(skb->data + offset); offset += sizeof(u32); But the problematic patch calculates: offset = ((rx->remaining + 1) & 0xfffe) + sizeof(u32); rx->header = get_unaligned_le32(skb->data + offset); Adding some debug logic to check those offset calculation used to find rx->header, the one in problematic code is always too large by sizeof(u32). Thus, this patch removes the incorrect " + sizeof(u32)" addition in the problematic calculation, and resolves the issue. Cc: Dean Jenkins <Dean_Jenkins@mentor.com> Cc: "David B. Robins" <linux@davidrobins.net> Cc: Mark Craske <Mark_Craske@mentor.com> Cc: Emil Goode <emilgoode@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Ivan Vecera <ivecera@redhat.com> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: stable <stable@vger.kernel.org> #4.4+ Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge 4.6-rc7 into tty-nextGreg Kroah-Hartman
We want the pty fixes in here as well so that patches can build on it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04usbnet: smsc95xx: silence an uninitialized variable warningDan Carpenter
If the call to fn() fails then "buf" is uninitialized. Just return the error code in that case. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04usbnet/smsc75xx: silence uninitialized variable warningDan Carpenter
If the fn() calls fail then "buf" is uninitialized. Just return early in that situation. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03rtl8152: correct speed testingOliver Neukum
Allow for SS+ USB Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-03usbnet: correct speed testingOliver Neukum
Allow for SS+ USB Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-01net/smscx5xx: use the device tree for mac addressArnd Bergmann
This takes the MAC address for smsc75xx/smsc95xx USB network devices from a the device tree. This is required to get a usable persistent address on the popular beagleboard, whose hardware designers accidentally forgot that an ethernet device really requires an a MAC address to be functional. The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores the MAC address in ROM accessible via VC4 firmware. The smsc75xx and smsc95xx drivers are just two copies of the same code, so better fix both. [lkundrak@v3.sk: updated to use of_get_property() as per suggestion from Arnd, reworded the message and comments a bit] Tested-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-30tty: Replace TTY_THROTTLED bit tests with tty_throttled()Peter Hurley
Abstract TTY_THROTTLED bit tests with tty_throttled(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28pegasus: fixes reported packet lengthPetko Manolov
The default Pegasus setup was to append the status and CRC at the end of each received packet. The status bits are used to update various stats, but CRC has been ignored. The new default is to not append CRC at the end of RX packets. Signed-off-by: Petko Manolov <petkan@mip-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28pegasus: fixes URB buffer allocation size;Petko Manolov
usb_fill_bulk_urb() receives buffer length parameter 8 bytes larger than what's allocated by alloc_skb(); This seems to be a problem with older (pegasus usb-1.1) devices, which may silently return more data than the maximal packet length. Reported-by: Lincoln Ramsay <a1291762@gmail.com> Signed-off-by: Petko Manolov <petkan@mip-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28lan78xx: workaround of forced 100 Full/Half duplex mode errorWoojung Huh
At forced 100 Full & Half duplex mode, chip may fail to set mode correctly when cable is switched between long(~50+m) and short one. As workaround, set to 10 before setting to 100 at forced 100 F/H mode. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-28lan78xx: fix statistics counter errorWoojung Huh
Fix rx_bytes, tx_bytes and tx_frames error in netdev.stats. - rx_bytes counted bytes excluding size of struct ethhdr. - tx_packets didn't count multiple packets in a single urb - tx_bytes included 8 bytes of extra commands. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-14cdc_mbim: apply "NDP to end" quirk to all Huawei devicesBjørn Mork
We now have a positive report of another Huawei device needing this quirk: The ME906s-158 (12d1:15c1). This is an m.2 form factor modem with no obvious relationship to the E3372 (12d1:157d) we already have a quirk entry for. This is reason enough to believe the quirk might be necessary for any number of current and future Huawei devices. Applying the quirk to all Huawei devices, since it is crucial to any device affected by the firmware bug, while the impact on non-affected devices is negligible. The quirk can if necessary be disabled per-device by writing N to /sys/class/net/<iface>/cdc_ncm/ndp_to_end Reported-by: Andreas Fett <andreas.fett@secunet.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-31net: usb: cdc_ncm: adding Telit LE910 V2 mobile broadband cardDaniele Palmas
Telit LE910 V2 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-28qmi_wwan: add "D-Link DWM-221 B1" device idBjørn Mork
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-27drivers/net/usb/plusb.c: Fix typoDiego Viola
Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-20Revert "lan78xx: add ndo_get_stats64"David S. Miller
This reverts commit a59f8c5b048dc938fb958c91c282c865cd845705. There are several bugs in this new code, for example: 1) Uses sleeping locks in get_stats64, which is not allowed, as the operation can be invoked in an atomic context. 2) Uses PM fields without CONFIG_PM or similar guards. 3) Does not synchronize HW stats when the device runtime suspends. Therefore this is being reverted until a correct version is implemented. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18lan78xx: add ndo_get_stats64Woojung Huh
Add lan78xx_get_stats64 of ndo_get_stats64 to report all statistics counters including errors from HW statistics. Read from HW when auto suspend is disabled, use saved counter when auto suspend is enabled because periodic call to ndo_get_stats64 prevents USB auto suspend. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-18lan78xx: handle statistics counter rolloverWoojung Huh
Update to handle statistics counter rollover. Check statistics counter periodically and compensate it when counter value rolls over at max (20 or 32bits). Simple mechanism adjusts monitoring timer to allow USB auto suspend. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-17qmi_wwan: Added support for Gemalto's Cinterion PHxx WWAN interfaceSchemmel Hans-Christoph
Added support for Gemalto's Cinterion PHxx WWAN interfaces by adding QMI_FIXED_INTF with Cinterion's VID and PID. PHxx can have: 2 RmNet Interfaces (PID 0x0082) or 1 RmNet + 1 USB Audio interface (PID 0x0083). Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of overlapping changes, as well as one instance (vxlan) of a bug fix in 'net' overlapping with code movement in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07cdc_ncm: do not call usbnet_link_change from cdc_ncm_bindBjørn Mork
usbnet_link_change will call schedule_work and should be avoided if bind is failing. Otherwise we will end up with scheduled work referring to a netdev which has gone away. Instead of making the call conditional, we can just defer it to usbnet_probe, using the driver_info flag made for this purpose. Fixes: 8a34b0ae8778 ("usbnet: cdc_ncm: apply usbnet_link_change") Reported-by: Andrey Konovalov <andreyknvl@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07cdc_ncm: toggle altsetting to force reset before setupBjørn Mork
Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07usbnet: cleanup after bind() in probe()Oliver Neukum
In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-06asix: do not free array priv->mdio->irqColin Ian King
Used to be allocated and required freeing, but now priv->mdio->irq is now a fixed sized array and should no longer be free'd. Issue detected using static analysis with CoverityScan Fixes: e7f4dc3536a400 ("mdio: Move allocation of interrupts into core") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-03qmi_wwan: add Sierra Wireless EM74xx device IDBjørn Mork
The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29lan78xx: add ethtool set & get pause functionsWoojung.Huh@microchip.com
Add ethtool operations of set_pauseram and get_pauseparm. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29lan78xx: remove unnecessary codeWoojung.Huh@microchip.com
It is not required after commit cd772de358d6 ("phy: keep pause flags in phy driver features") Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-29lan78xx: replace devid to chipid & chiprevWoojung.Huh@microchip.com
Replace devid to chipid & chiprev for easy access. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Add Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card (rev3) to qmi_wwanPatrik Halfar
New revison of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by: Patrik Halfar <patrik_halfar@halfarit.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18USB: cdc_subset: only build when one driver is enabledArnd Bergmann
This avoids a harmless randconfig warning I get when USB_NET_CDC_SUBSET is enabled, but all of the more specific drivers are not: drivers/net/usb/cdc_subset.c:241:2: #warning You need to configure some hardware for this driver The current behavior is clearly intentional, giving a warning when a user picks a configuration that won't do anything good. The only reason for even addressing this is that I'm getting close to eliminating all 'randconfig' warnings on ARM, and this came up a couple of times. My workaround is to not even build the module when none of the configurations are enable. Alternatively we could simply remove the #warning (nothing wrong for compile-testing), turn it into a runtime warning, or change the Kconfig options into a menu to hide CONFIG_USB_NET_CDC_SUBSET. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16qmi_wwan: add "4G LTE usb-modem U901"Bjørn Mork
Thomas reports: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=05c6 ProdID=6001 Rev=00.00 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber=1234567890ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28lan78xx: throttle TX path at slower than SuperSpeed USBWoojung.Huh@microchip.com
Throttle TX path only at slower than SuperSpeed USB. SuperSpeed USB has enough bandwidth to maintain GigE. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28lan78xx: Add to handle mux control per chip idWoojung.Huh@microchip.com
Depends on chip, some EEPROM pins are muxed with LED function. Disable & restore LED function to access EEPROM. Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-28lan78xx: change to use updated phy-ignore-interruptsWoojung.Huh@microchip.com
Update lan78xx to use patch of commit 4f2aaf7dd95b ("Merge branch 'fix-phy-ignore-interrupts'"). Signed-off-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/bonding/bond_main.c drivers/net/ethernet/mellanox/mlxsw/spectrum.h drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c The bond_main.c and mellanox switch conflicts were cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: qmi_wwan: Add SIMCom 7230EKristian Evensen
SIMCom 7230E is a QMI LTE module with support for most "normal" bands. Manual testing has showed that only interface five works. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-08 11:55:10 +0000