summaryrefslogtreecommitdiff
path: root/drivers/net/usb/ax88179_178a.c
AgeCommit message (Collapse)Author
2019-11-24ax88179_178a: add ethtool_op_get_ts_info()Andreas K. Besslein
This enables the use of SW timestamping. ax88179_178a uses the usbnet transmit function usbnet_start_xmit() which implements software timestamping. ax88179_178a overrides ethtool_ops but missed to set .get_ts_info. This caused SOF_TIMESTAMPING_TX_SOFTWARE capability to be not available. Signed-off-by: Andreas K. Besslein <besslein.andreas@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-11net: usb: ax88179_178a: write mac to hardware in get_mac_addrPeter Fink
When the MAC address is supplied via device tree or a random MAC is generated it has to be written to the asix chip in order to receive any data. Previously in 9fb137aef34e ("net: usb: ax88179_178a: allow optionally getting mac address from device tree") this line was omitted because it seemed to work perfectly fine without it. But it was simply not detected because the chip keeps the mac stored even beyond a reset and it was tested on a hardware with an integrated UPS where the asix chip was permanently powered on even throughout power cycles. Fixes: 9fb137aef34e ("net: usb: ax88179_178a: allow optionally getting mac address from device tree") Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: usb: ax88179_178a: allow optionally getting mac address from device treePeter Fink
Adopt and integrate the feature to pass the MAC address via device tree from asix_device.c (03fc5d4) also to other ax88179 based asix chips. E.g. the bootloader fills in local-mac-address and the driver will then pick up and use this MAC address. Signed-off-by: Peter Fink <pfink@christ-es.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: usb: Merge cpu_to_le32s + memcpy to put_unaligned_le32Chuhong Yuan
Merge the combo uses of cpu_to_le32s and memcpy. Use put_unaligned_le32 instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22ax88179_178a: Merge memcpy + le32_to_cpus to get_unaligned_le32Chuhong Yuan
Merge the combo use of memcpy and le32_to_cpus. Use get_unaligned_le32 instead. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-29ax88179_178a: Check for supported Wake-on-LAN modesFlorian Fainelli
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-01Revert "net: usb: asix88179_178a: de-duplicate code"David S. Miller
This reverts commit cf29bded91f9153208c4c2145d602cd82430ad1a. It causes regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: usb: asix88179_178a: de-duplicate codeAlexander Kurz
Remove the duplicated code for asix88179_178a bind and reset methods. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-08net: usb: asix88179_178a: set permanent address once onlyAlexander Kurz
The permanent address of asix88179_178a devices is read at probe time and should not be overwritten later. Otherwise it may be overwritten unintentionally with a configured address. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
A set of overlapping changes in macvlan and the rocker driver, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27net: usb: asix88179_178a: Add support for the Belkin B2B128Andrew F. Davis
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05net/{mii, smsc}: Make mii_ethtool_get_link_ksettings and smc_netdev_get_ecmd ↵yuval.shaia@oracle.com
return void Make return value void since functions never returns meaningfull value. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-03net: usbnet: support 64bit statsGreg Ungerer
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <gerg@linux-m68k.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: usb: asix88179_178a: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Net Driver: Add Cypress GX3 VID=04b4 PID=3610.Allan Chou
Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Vendor=04b4 ProdID=3610). Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems with the Kensington SD4600P USB-C Universal Dock with Power, which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. A similar patch was signed-off and tested-by Allan Chou <allan@asix.com.tw> on 2015-12-01. Allan verified his similar patch on x86 Linux kernel 4.1.6 system with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. Tested-by: Allan Chou <allan@asix.com.tw> Tested-by: Chris Roth <chris.roth@usask.ca> Tested-by: Artjom Simon <artjom.simon@gmail.com> Signed-off-by: Allan Chou <allan@asix.com.tw> Signed-off-by: Chris Roth <chris.roth@usask.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20net: use core MTU range checking in USB NIC driversJarod Wilson
usbnet: - Remove stale new_mtu <= 0 check in usbnet.c - Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own max_mtu and/or min_mtu as needed) r8152: - Set appropriate max_mtu for different variants (1500 or 9194) lan78xx: - Set max_mtu = 9000 asix_driver: - max_mtu = 16384 for ax88178 variant ax88179: - max_mtu = 4088 cdc_ncm: - max_mtu from hardware cdc-phonet: - min_mtu = 6, max_mtu = 65541 sierra_net: - max_mtu = 1500, call usbnet_change_mtu directly - sierra_net_change_mtu checked for MTU > 1500, then called usbnet_change_mtu, but if we set max_mtu to let the network core handle the range check, then we can simply call usbnet_change_mtu directly smsc75xx: - max_mtu = 9000 CC: netdev@vger.kernel.org CC: Woojung Huh <woojung.huh@microchip.com> CC: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> CC: Hayes Wang <hayeswang@realtek.com> CC: Oliver Neukum <oneukum@suse.com> CC: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20ax88179_178a: fix bonding failureIan Morgan
The following patch fixes a bug which causes the ax88179_178a driver to be incapable of being added to a bond. When I brought up the issue with the bonding maintainers, they indicated that the real problem was with the NIC driver which must return zero for success (of setting the MAC address). I see that several other NIC drivers follow that pattern by either simply always returing zero, or by passing through a negative (error) result while rewriting any positive return code to zero. With that same philisophy applied to the ax88179_178a driver, it allows it to work correctly with the bonding driver. I believe this is suitable for queuing in -stable, as it's a small, simple, and obvious fix that corrects a defect with no other known workaround. This patch is against vanilla 3.17(.0). Signed-off-by: Ian Morgan <imorgan@primordial.ca> drivers/net/usb/ax88179_178a.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31AX88179_178A: Add ethtool ops for EEE supportFreddy Xin
Add functions to support ethtool EEE manipulating, and the EEE is disabled in default setting to enhance the compatibility with certain switch. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-09Merge tag 'usb-3.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are 4 USB fixes for your current tree. Two of them are reverts to hopefully resolve the nasty XHCI regressions we have been having on some types of devices. The other two are quirks for some Logitech video devices" * tag 'usb-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma" Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather." usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
2014-03-07Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"Mathias Nyman
This reverts commit 3804fad45411b48233b48003e33a78f290d227c8. This commit, together with commit 247bf557273dd775505fb9240d2d152f4f20d304 "xhci 1.0: Limit arbitrarily-aligned scatter gather." were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts, but for now, revert this patch until scatter gather can be properly supported. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-02USB AX88179/178A: Support D-Link DUB-1312Gerry Demaret
Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter to the AX88179/178A driver. Signed-off-by: Gerry Demaret <gerry@tigron.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26AX88179_178A: Add VID:DID for Lenovo OneLinkDock Gigabit LANFreddy Xin
Add VID:DID for Lenovo OneLinkDock Gigabit LAN Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17usbnet: remove generic hard_header_len checkEmil Goode
This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06usb: Fix FSF address in file headersJeff Kirsher
Several files refer to an old address for the Free Software Foundation in the file header comment. Resolve by replacing the address with the URL <http://www.gnu.org/licenses/> so that we do not have to keep updating the header comments anytime the address changes. CC: Oliver Neukum <oliver@neukum.org> CC: Steve Glendinning <steve.glendinning@shawell.net> CC: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-25ax88179_178a: Remove AX_MEDIUM_ALWAYS_ONE bit in AX_MEDIUM_STATUS_MODE ↵Freddy Xin
register to avoid TX throttling Remove AX_MEDIUM_ALWAYS_ONE in AX_MEDIUM_STATUS_MODE register. Setting this bit may cause TX throttling in Half-Duplex mode. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22ax88179_178a: Add VID:DID for Samsung USB Ethernet AdapterFreddy Xin
Add VID:DID for Samsung USB Ethernet Adapter. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22ax88179_178a: Correct the RX error definition in RX headerFreddy Xin
Correct the definition of AX_RXHDR_CRC_ERR and AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr seperately. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-08-12USBNET: ax88179_178a: enable tso if usb host supports sg dmaMing Lei
This patch enables 'can_dma_sg' flag for ax88179_178a device if the attached host controller supports building packet from discontinuous buffers(DMA SG is possible), so TSO can be enabled and skb fragment buffers can be passed to usb stack via urb->sg directly. With the patch, system CPU utilization decreased ~50% and throughput increased by ~10% when doing iperf client test on one ARM A15 dual core board. Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Grant Grundler <grundler@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Freddy Xin <freddy@asix.com.tw> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Eric Dumazet <edumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03ax88179_178a: avoid copy of tx tcp packetsEric Dumazet
ax88179_tx_fixup() has quite complex code trying to push 8 bytes of control data (len/mss), but fails to do it properly for TCP packets, incurring an extra copy and point of memory allocation failure. Lets use the simple and approved way. dev->needed_headroom being 8, all frames should have 8 bytes of headroom, so the extra copy should be unlikely anyway. This patch should improve performance for TCP xmits. Reported-by: Ming Lei <ming.lei@canonical.com> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-27USBNET: centralize computing of max rx/tx qlenMing Lei
This patch centralizes computing of max rx/tx qlen, because: - RX_QLEN()/TX_QLEN() is called in hot path - computing depends on device's usb speed, now we have ls/fs, hs, ss, so more checks need to be involved - in fact, max rx/tx qlen should not only depend on device USB speed, but also depend on ethernet link speed, so we need to consider that in future. - if SG support is done, max tx qlen may need change too Generally, hard_mtu and rx_urb_size are changed in bind(), reset() and link_reset() callback, and change mtu network operation, this patches introduces the API of usbnet_update_max_qlen(), and calls it in above path. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-26usbnet: do not pretend to support SG/TSOEric Dumazet
usbnet doesn't support yet SG, so drivers should not advertise SG or TSO capabilities, as they allow TCP stack to build large TSO packets that need to be linearized and might use order-5 pages. This adds an extra copy overhead and possible allocation failures. Current code ignore skb_linearize() return code so crashes are even possible. Best is to not pretend SG/TSO is supported, and add this again when/if usbnet really supports SG for devices who could get a performance gain. Based on a prior patch from Freddy Xin <freddy@asix.com.tw> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28usbnet: ax88179_178a: add .reset_resume hookDavid Chang
I tested with the AX88179 usb dongle, if without .reset_resume hook, after S3/S4 resume you have to enable network interface or reload the dirver module manually otherwise the network interface can not work. Signed-off-by: David Chang <dchang@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28usbnet: ax88179_178a: Correct a typo in descriptionDavid Chang
Correct a typo in description of driver_info, it should be Gigabit Signed-off-by: David Chang <dchang@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11usbnet: ax88179_1781: apply usbnet_link_changeMing Lei
Use usbnet_link_change to handle link change centrally. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-03ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driverFreddy Xin
This is a resubmission. Added kfree() in ax88179_get_eeprom to prevent memory leakage. Modified "__le16 rxctl" to "u16 rxctl" in "struct ax88179_data" and removed pointless casts. Removed asix_init and asix_exit functions and added "module_usb_driver(ax88179_178a_driver)". Fixed endianness issue on big endian systems and verified this driver on iBook G4. Removed steps that change net->features in ax88179_set_features function. Added "const" to ethtool_ops structure and fixed the coding style of AX88179_BULKIN_SIZE array. Fixed the issue that the default MTU is not 1500. Added ax88179_change_mtu function and enabled the hardware jumbo frame function to support an MTU higher than 1500. Fixed indentation and empty line coding style errors. The _nopm version usb functions were added to access register in suspend and resume functions. Serveral variables allocted dynamically were removed and replaced by stack variables. ax88179_get_eeprom were modified from asix_get_eeprom in asix_common. This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0 to gigabit ethernet adapters. It's based on the AX88xxx driver but the usb commands used to access registers for AX88179 are completely different. This driver had been verified on x86 system with AX88179/AX88178A and Sitcomm LN-032 USB dongles. Signed-off-by: Freddy Xin <freddy@asix.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 16:41:26 +0000