summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2018-09-04net: phy: mscc: factorize function for getting LED mode from DTQuentin Schulz
Microsemi PHYs support different LED modes depending on the variant, so let's factorize the code so we just have to give the supported modes while the logic behind getting the mode remains identical. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04net: phy: mscc: factorize code for LEDs modeQuentin Schulz
LEDs modes are set the same way, except they are offset by 4 times the index of the LED. Let's factorize all the code so that it's easier to add support for the 4 LEDs of the VSC8584 PHY. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: dp83640: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comment at the top of the switch statement with a proper "fall through" annotation for each case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1056542 ("Missing break in switch") Addresses-Coverity-ID: 1339579 ("Missing break in switch") Addresses-Coverity-ID: 1369526 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: phy: sftp: print debug message with text, not numbersAndrew Lunn
Convert the state numbers, device state, etc from numbers to strings when printing debug messages. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09phylink: add helper for configuring 2500BaseX modesRussell King
Add a helper for MAC drivers to use in their validate callback to deal with 2500BaseX vs 1000BaseX modes, where the hardware supports both but it is not possible to automatically select between them. This helper defaults to 1000BaseX, as that is the 802.3 standard, and will allow users to select 2500BaseX either by forcing the speed if AN is disabled, or by changing the advertising mask if AN is enabled. Disabling AN is not recommended as it is only the speed that we're interested in controlling, not the duplex or pause mode parameters. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: phy: Add support for Broadcom Omega internal Combo GPHYArun Parameswaran
Add support for the Broadcom Omega SoC internal Combo Ethernet GPHY to the bcm7xxx phy driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Add pm support to Broadcom iProc mdio mux driverArun Parameswaran
Add support for suspend and resume to the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Add support to configure clock in Broadcom iProc mdio muxArun Parameswaran
Add support to configure the internal rate adjust register based on the core clock supplied through device tree in the Broadcom iProc mdio mux. The operating frequency of the mdio mux block is 11MHz. This is derrived by dividing the clock to the mdio mux with the rate adjust register. In some SoC's the default values of the rate adjust register do not yield 11MHz. These SoC's are required to specify the clock via the device tree for proper operation. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Use devm api for mdio bus allocation in bcm iproc mdio muxArun Parameswaran
Use devm_mdiobus_alloc() instead of mdiobus_alloc() in the Broadcom iProc mdio mux driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Disable external master access in bcm mdio mux driverArun Parameswaran
Configure the scan control register in the Broadcom iProc mdio mux driver to disable access to external master. In some SoC's, the scan control register defaults to an incorrect value. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02net: phy: Fix the register offsets in Broadcom iProc mdio mux driverArun Parameswaran
Modify the register offsets in the Broadcom iProc mdio mux to start from the top of the register address space. Earlier, the base address pointed to the end of the block's register space. The base address will now point to the start of the mdio's address space. The offsets have been fixed to match this. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30net: phy: mscc: the extended page access register is 16 bitsQuentin Schulz
The Extended Page Access is a 16-bit register, so change the page parameter of vsc85xx_phy_page_set to a u16. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-28net: mdio-mux: bcm-iproc: fix wrong getter and setter pairAnton Vasilyev
mdio_mux_iproc_probe() uses platform_set_drvdata() to store md pointer in device, whereas mdio_mux_iproc_remove() restores md pointer by dev_get_platdata(&pdev->dev). This leads to wrong resources release. The patch replaces getter to platform_get_drvdata. Fixes: 98bc865a1ec8 ("net: mdio-mux: Add MDIO mux driver for iProc SoCs") Signed-off-by: Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27net: phy: marvell: Replace mdelay() with msleep() in m88e1116r_config_init()Jia-Ju Bai
m88e1116r_config_init() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net: phy: add helper phy_polling_modeHeiner Kallweit
Add a helper for checking whether polling is used to detect PHY status changes. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net: phy: prevent PHYs w/o Clause 22 regs from calling genphy_config_anegCamelia Groza
genphy_config_aneg() should be called only by PHYs that implement the Clause 22 register set. Prevent Clause 45 PHYs that don't implement the register set from calling the genphy function. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-07-24net: phy: add GBit master / slave error detectionHeiner Kallweit
Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21net: phy: sfp: Do not use "imply HWMON"Guenter Roeck
"imply HWMON" was supposed to ensure that the SFP phy code can be built with HWMON enabled or disabled while at the same time ensuring that HWMON is not built as module if SFP is built into the kernel. Unfortunately, that does not work as intended. With "allmodconfig", it results in several unrelated HWMON drivers to be disabled instead of being built as module as expected. Let's use the old "depends on HWMON || HWMON=n" instead. This is slightly different (it enforces SFP to be built as module if HWMON is built as module), but it is better than the alternative of using "IS_REACHABLE()" in the driver since that would disable sensor support if HWMON is built as module and SFP is built into the kernel. Fixes: 1323061a018a ("net: phy: sfp: Add HWMON support for module sensors") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21net: phy: consider PHY_IGNORE_INTERRUPT in phy_start_aneg_privHeiner Kallweit
The situation described in the comment can occur also with PHY_IGNORE_INTERRUPT, therefore change the condition to include it. Fixes: f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net: phy: Drop OF dependency for MDIO_BCM_UNIMACFlorian Fainelli
The driver builds fine even with CONFIG_OF=n since we now have stubs that are provided. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net: phy: realtek: Support RTL8366RB variantLinus Walleij
The RTL8366RB is an ASIC with five internal PHYs for LAN0..LAN3 and WAN. The PHYs are spawn off the main device so they can be handled in a distributed manner by the Realtek PHY driver. All that is really needed is the power save feature enablement and letting the PHY driver core pick up the IRQ from the switch chip. Cc: Antti Seppälä <a.seppala@gmail.com> Cc: Roman Yeryomin <roman@advem.lv> Cc: Colin Leitner <colin.leitner@googlemail.com> Cc: Gabor Juhos <juhosg@openwrt.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net: phy: sfp: Add HWMON support for module sensorsAndrew Lunn
SFP modules can contain a number of sensors. The EEPROM also contains recommended alarm and critical values for each sensor, and indications of if these have been exceeded. Export this information via HWMON. Currently temperature, VCC, bias current, transmit power, and possibly receiver power is supported. The sensors in the modules can either return calibrate or uncalibrated values. Uncalibrated values need to be manipulated, using coefficients provided in the SFP EEPROM. Uncalibrated receive power values require floating point maths in order to calibrate them. Performing this in the kernel is hard. So if the SFP module indicates it uses uncalibrated values, RX power is not made available. With this hwmon device, it is possible to view the sensor values using lm-sensors programs: in0: +3.29 V (crit min = +2.90 V, min = +3.00 V) (max = +3.60 V, crit max = +3.70 V) temp1: +33.0°C (low = -5.0°C, high = +80.0°C) (crit low = -10.0°C, crit = +85.0°C) power1: 1000.00 nW (max = 794.00 uW, min = 50.00 uW) ALARM (LCRIT) (lcrit = 40.00 uW, crit = 1000.00 uW) curr1: +0.00 A (crit min = +0.00 A, min = +0.00 A) ALARM (LCRIT, MIN) (max = +0.01 A, crit max = +0.01 A) The scaling sensors performs on the bias current is not particularly good. The raw values are more useful: curr1: curr1_input: 0.000 curr1_min: 0.002 curr1_max: 0.010 curr1_lcrit: 0.000 curr1_crit: 0.011 curr1_min_alarm: 1.000 curr1_max_alarm: 0.000 curr1_lcrit_alarm: 1.000 curr1_crit_alarm: 0.000 In order to keep the I2C overhead to a minimum, the constant values, such as limits and calibration coefficients are read once at module insertion time. Thus only reading *_input and *_alarm properties requires i2c read operations. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: phy: realtek: add missing entry for RTL8211C to mdio_device_id tableHeiner Kallweit
Add missing entry for RTL8211C to mdio_device_id table. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: cf87915cb9f8 ("net: phy: realtek: add support for RTL8211C") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: phy: add phy_speed_down and phy_speed_upHeiner Kallweit
Some network drivers include functionality to speed down the PHY when suspending and just waiting for a WoL packet because this saves energy. This functionality is quite generic, therefore let's factor it out to phylib. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16net: phy: add helper phy_config_anegHeiner Kallweit
This functionality will also be needed in subsequent patches of this series, therefore factor it out to a helper. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11sfp: fix module initialisation with netdev already upRussell King
It was been observed that with a particular order of initialisation, the netdev can be up, but the SFP module still has its TX_DISABLE signal asserted. This occurs when the network device brought up before the SFP kernel module has been inserted by userspace. This occurs because sfp-bus layer does not hear about the change in network device state, and so assumes that it is still down. Set netdev->sfp when the upstream is registered to work around this problem. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-11sfp: ensure we clean up properly on bus registration failureRussell King
We fail to correctly clean up after a bus registration failure, which can lead to an incorrect assumption about the registration state of the upstream or sfp cage. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: phy: fix flag masking in __set_phy_supportedHeiner Kallweit
Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd393c2c ("phylib: Add phy_set_max_speed helper") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: phy: marvell: change default m88e1510 LED configurationWang Dongsheng
The m88e1121 LED default configuration does not apply m88e151x. So add a function to relpace m88e1121 LED configuration. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: phy: vitesse: Add support for VSC73xxLinus Walleij
The VSC7385, VSC7388, VSC7395 and VSC7398 are integrated switch/router chips for 5+1 or 8-port switches/routers. When managed directly by Linux using DSA we need to do a special set-up "dance" on the PHY. Unfortunately these sequences switches the PHY to undocumented pages named 2a30 and 52b6 and does undocumented things. It is described by these opaque sequences also in the reference manual. This is a best effort to integrate it anyways. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03net: phy: DP83TC811: Fix SGMII enable/disableDan Murphy
If SGMII was selected in the DT then the device should write the SGMII enable bit. If SGMII is not selected in the DT then the SGMII bit should be disabled. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03net: phy: DP83TC811: Add INT_STAT3Dan Murphy
Add INT_STAT3 interrupt setting and clearing support. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: phy: realtek: add support for RTL8211CHeiner Kallweit
RTL8211C has an issue when operating in Gigabit slave mode, therefore genphy driver can't be used. See also this U-boot change. https://lists.denx.de/pipermail/u-boot/2016-March/249712.html Add a PHY driver for this chip with the quirk to force Gigabit master mode. As a note: This will make it impossible to connect two network ports directly which both are driven by a RTl8211C. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-02net: phy: realtek: add missing entry for RTL8211 to mdio_device_id tableHeiner Kallweit
When adding support for RTL8211 I forgot to update the mdio_device_id table. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: d241d4aac93f ("net: phy: realtek: add support for RTL8211") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net: phy: DP83TC811: Fix disabling interruptsDan Murphy
Fix a bug where INT_STAT1 was written twice and INT_STAT2 was ignored when disabling interrupts. Fixes: b753a9faaf9a ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net: phy: realtek: add support for RTL8211Heiner Kallweit
In preparation of adding phylib support to the r8169 driver we need PHY drivers for all chip-internal PHY types. Fortunately almost all of them are either supported by the Realtek PHY driver already or work with the genphy driver. Still missing is support for the PHY of RTL8169s, it requires a quirk to properly support 100Mbit-fixed mode. The quirk was copied from r8169 driver which copied it from the vendor driver. Based on the PHYID the internal PHY seems to be a RTL8211. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28net: phy: xgmiitorgmii: Check read_status resultsBrandon Maier
We're ignoring the result of the attached phy device's read_status(). Return it so we can detect errors. Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28net: phy: xgmiitorgmii: Use correct mdio busBrandon Maier
The xgmiitorgmii is using the mii_bus of the device it's attached to, instead of the bus it was given during probe. Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28net: phy: xgmiitorgmii: Check phy_driver ready before accessingBrandon Maier
Since a phy_device is added to the global mdio_bus list during phy_device_register(), but a phy_device's phy_driver doesn't get attached until phy_probe(). It's possible of_phy_find_device() in xgmiitorgmii will return a valid phy with a NULL phy_driver. Leading to a NULL pointer access during the memcpy(). Fixes this Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.40 #1 Hardware name: Xilinx Zynq Platform task: ce4c8d00 task.stack: ce4ca000 PC is at memcpy+0x48/0x330 LR is at xgmiitorgmii_probe+0x90/0xe8 pc : [<c074bc68>] lr : [<c0529548>] psr: 20000013 sp : ce4cbb54 ip : 00000000 fp : ce4cbb8c r10: 00000000 r9 : 00000000 r8 : c0c49178 r7 : 00000000 r6 : cdc14718 r5 : ce762800 r4 : cdc14710 r3 : 00000000 r2 : 00000054 r1 : 00000000 r0 : cdc14718 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xce4ca210) ... [<c074bc68>] (memcpy) from [<c0529548>] (xgmiitorgmii_probe+0x90/0xe8) [<c0529548>] (xgmiitorgmii_probe) from [<c0526a94>] (mdio_probe+0x28/0x34) [<c0526a94>] (mdio_probe) from [<c04db98c>] (driver_probe_device+0x254/0x414) [<c04db98c>] (driver_probe_device) from [<c04dbd58>] (__device_attach_driver+0xac/0x10c) [<c04dbd58>] (__device_attach_driver) from [<c04d96f4>] (bus_for_each_drv+0x84/0xc8) [<c04d96f4>] (bus_for_each_drv) from [<c04db5bc>] (__device_attach+0xd0/0x134) [<c04db5bc>] (__device_attach) from [<c04dbdd4>] (device_initial_probe+0x1c/0x20) [<c04dbdd4>] (device_initial_probe) from [<c04da8fc>] (bus_probe_device+0x98/0xa0) [<c04da8fc>] (bus_probe_device) from [<c04d8660>] (device_add+0x43c/0x5d0) [<c04d8660>] (device_add) from [<c0526cb8>] (mdio_device_register+0x34/0x80) [<c0526cb8>] (mdio_device_register) from [<c0580b48>] (of_mdiobus_register+0x170/0x30c) [<c0580b48>] (of_mdiobus_register) from [<c05349c4>] (macb_probe+0x710/0xc00) [<c05349c4>] (macb_probe) from [<c04dd700>] (platform_drv_probe+0x44/0x80) [<c04dd700>] (platform_drv_probe) from [<c04db98c>] (driver_probe_device+0x254/0x414) [<c04db98c>] (driver_probe_device) from [<c04dbc58>] (__driver_attach+0x10c/0x118) [<c04dbc58>] (__driver_attach) from [<c04d9600>] (bus_for_each_dev+0x8c/0xd0) [<c04d9600>] (bus_for_each_dev) from [<c04db1fc>] (driver_attach+0x2c/0x30) [<c04db1fc>] (driver_attach) from [<c04daa98>] (bus_add_driver+0x50/0x260) [<c04daa98>] (bus_add_driver) from [<c04dc440>] (driver_register+0x88/0x108) [<c04dc440>] (driver_register) from [<c04dd6b4>] (__platform_driver_register+0x50/0x58) [<c04dd6b4>] (__platform_driver_register) from [<c0b31248>] (macb_driver_init+0x24/0x28) [<c0b31248>] (macb_driver_init) from [<c010203c>] (do_one_initcall+0x60/0x1a4) [<c010203c>] (do_one_initcall) from [<c0b00f78>] (kernel_init_freeable+0x15c/0x1f8) [<c0b00f78>] (kernel_init_freeable) from [<c0763d10>] (kernel_init+0x18/0x124) [<c0763d10>] (kernel_init) from [<c0112d74>] (ret_from_fork+0x14/0x20) Code: ba000002 f5d1f03c f5d1f05c f5d1f07c (e8b151f8) ---[ end trace 3e4ec21905820a1f ]--- Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26mdio-mux-gpio: Remove VLA usageKees Cook
In the quest to remove all stack VLA usage from the kernel[1], this allocates the values buffer during the callback instead of putting it on the stack. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-24net: phy: fixed-phy: Make the error path simplerFabio Estevam
When platform_device_register_simple() fails we can return the error immediately instead of jumping to the 'err_pdev' label. This makes the error path a bit simpler. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: phy: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12net: phy: mdio-gpio: Cut surplus includesLinus Walleij
The GPIO MDIO driver now needs only <linux/gpio/consumer.h> so cut the legacy <linux/gpio.h> and <linux/of_gpio.h> includes that are no longer used. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 02:45:02 +0000