summaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)Author
2017-02-20net: phy: Check phydev->drvFlorian Fainelli
There are number of function calls, originating from user-space, typically through the Ethernet driver that can make us crash by dereferencing phydev->drv which will be NULL once we unbind the driver from the PHY. There are still functional issues that prevent an unbind then rebind to work, but these will be addressed separately. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20net: phy: Fix PHY unbind crashFlorian Fainelli
The PHY library does not deal very well with bind and unbind events. The first thing we would see is that we were not properly canceling the PHY state machine workqueue, so we would be crashing while dereferencing phydev->drv since there is no driver attached anymore. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-02-09net: phy: Initialize mdio clock at probe functionYendapally Reddy Dhananjaya Reddy
USB PHYs need the MDIO clock divisor enabled earlier to work. Initialize mdio clock divisor in probe function. The ext bus bit available in the same register will be used by mdio mux to enable external mdio. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09net: phy: Fix PHY module checks and NULL deref in phy_attach_direct()Florian Fainelli
The Generic PHY drivers gets assigned after we checked that the current PHY driver is NULL, so we need to check a few things before we can safely dereference d->driver. This would be causing a NULL deference to occur when a system binds to the Generic PHY driver. Update phy_attach_direct() to do the following: - grab the driver module reference after we have assigned the Generic PHY drivers accordingly, and remember we came from the generic PHY path - update the error path to clean up the module reference in case the Generic PHY probe function fails - split the error path involving phy_detacht() to avoid double free/put since phy_detach() does all the clean up - finally, have phy_detach() drop the module reference count before we call device_release_driver() for the Generic PHY driver case Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: phy: Add LED mode driver for Microsemi PHYs.Raju Lakkaraju
LED Mode: Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different status information that can be selected by setting LED mode. LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from Device Tree. Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The conflict was an interaction between a bug fix in the netvsc driver in 'net' and an optimization of the RX path in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: dp83867: Recover from "port mirroring" N/A MODE4Lukasz Majewski
The DP83867 when not properly bootstrapped - especially with LED_0 pin - can enter N/A MODE4 for "port mirroring" feature. To provide normal operation of the PHY, one needs not only to explicitly disable the port mirroring feature, but as well stop some IC internal testing (which disables RGMII communication). To do that the STRAP_STS1 (0x006E) register must be read and RESERVED bit 11 examined. When it is set, the another RESERVED bit (11) at PHYCR (0x0010) register must be clear to disable testing mode and enable RGMII communication. Thorough explanation of the problem can be found at following e2e thread: "DP83867IR: Problem with RESERVED bits in PHY Control Register (PHYCR) - Linux driver" https://e2e.ti.com/support/interface/ethernet/f/903/p/571313/2096954#2096954 Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: dp83867: Add lane swapping support in the DP83867 TI's PHY driverLukasz Majewski
This patch adds support for enabling or disabling the lane swapping (called "port mirroring" in PHY's CFG4 register) feature of the DP83867 TI's PHY device. One use case is when bootstrap configuration enables this feature (because of e.g. LED_0 wrong wiring) so then one needs to disable it in software (at u-boot/Linux). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: bcm7xxx: Add BCM74371 PHY IDFlorian Fainelli
Add the BCM74371 PHY ID to the list of supported chips. This is a 28nm technology Gigabit PHY SoC. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: Allow pre-declaration of MDIO devicesFlorian Fainelli
Allow board support code to collect pre-declarations for MDIO devices by registering them with mdiobus_register_board_info(). SPI and I2C buses have a similar feature, we were missing this for MDIO devices, but this is particularly useful for e.g: MDIO-connected switches which need to provide their port layout (often board-specific) to a MDIO Ethernet switch driver. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: phy: Fix lack of reference count on PHY driverMao Wenan
There is currently no reference count being held on the PHY driver, which makes it possible to remove the PHY driver module while the PHY state machine is running and polling the PHY. This could cause crashes similar to this one to show up: [ 43.361162] BUG: unable to handle kernel NULL pointer dereference at 0000000000000140 [ 43.361162] IP: phy_state_machine+0x32/0x490 [ 43.361162] PGD 59dc067 [ 43.361162] PUD 0 [ 43.361162] [ 43.361162] Oops: 0000 [#1] SMP [ 43.361162] Modules linked in: dsa_loop [last unloaded: broadcom] [ 43.361162] CPU: 0 PID: 1299 Comm: kworker/0:3 Not tainted 4.10.0-rc5+ #415 [ 43.361162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.361162] Workqueue: events_power_efficient phy_state_machine [ 43.361162] task: ffff880006782b80 task.stack: ffffc90000184000 [ 43.361162] RIP: 0010:phy_state_machine+0x32/0x490 [ 43.361162] RSP: 0018:ffffc90000187e18 EFLAGS: 00000246 [ 43.361162] RAX: 0000000000000000 RBX: ffff8800059e53c0 RCX: ffff880006a15c60 [ 43.361162] RDX: ffff880006782b80 RSI: 0000000000000000 RDI: ffff8800059e5428 [ 43.361162] RBP: ffffc90000187e48 R08: ffff880006a15c40 R09: 0000000000000000 [ 43.361162] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800059e5428 [ 43.361162] R13: ffff8800059e5000 R14: 0000000000000000 R15: ffff880006a15c40 [ 43.361162] FS: 0000000000000000(0000) GS:ffff880006a00000(0000) knlGS:0000000000000000 [ 43.361162] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.361162] CR2: 0000000000000140 CR3: 0000000005979000 CR4: 00000000000006f0 [ 43.361162] Call Trace: [ 43.361162] process_one_work+0x1b4/0x3e0 [ 43.361162] worker_thread+0x43/0x4d0 [ 43.361162] ? __schedule+0x17f/0x4e0 [ 43.361162] kthread+0xf7/0x130 [ 43.361162] ? process_one_work+0x3e0/0x3e0 [ 43.361162] ? kthread_create_on_node+0x40/0x40 [ 43.361162] ret_from_fork+0x29/0x40 [ 43.361162] Code: 56 41 55 41 54 4c 8d 67 68 53 4c 8d af 40 fc ff ff 48 89 fb 4c 89 e7 48 83 ec 08 e8 c9 9d 27 00 48 8b 83 60 ff ff ff 44 8b 73 98 <48> 8b 90 40 01 00 00 44 89 f0 48 85 d2 74 08 4c 89 ef ff d2 8b Keep references on the PHY driver module right before we are going to utilize it in phy_attach_direct(), and conversely when we don't use it anymore in phy_detach(). Signed-off-by: Mao Wenan <maowenan@huawei.com> [florian: rebase, rework commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: phy: marvell: Add support for 88e1545 PHYAndrew Lunn
The 88e1545 PHYs are discrete Marvell PHYs, found in a quad package on the zii-devel-b board. Add support for it to the Marvell PHY driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02net: phy: Marvell: Add mv88e6390 internal PHYAndrew Lunn
The mv88e6390 Ethernet switch has internal PHYs. These PHYs don't have an model ID in the ID2 register. So the MDIO driver in the switch intercepts reads to this register, and returns the switch family ID. Extend the Marvell PHY driver by including this ID, and treat the PHY as a 88E1540. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02xgene_enet: remove bogus forward declarationsArnd Bergmann
The device match tables for both the xgene_enet driver and its phy driver have forward declarations that declare an array without a length, leading to a clang warning when they are not followed by an actual defitinition: drivers/net/ethernet/apm/xgene/../../../phy/mdio-xgene.h:135:34: warning: tentative array definition assumed to have one element drivers/net/ethernet/apm/xgene/xgene_enet_main.c:33:36: warning: tentative array definition assumed to have one element The declarations for the mdio driver are even in a header file, so they cause duplicate definitions of the tables for each file that includes them. This removes all four forward declarations and moves the actual definitions up a little, so they are in front of their first user. For the OF match tables, this means having to remove the #ifdef around them, and passing the actual structure into of_match_device(). This has no effect on the generated object code though, as the of_match_device function has an empty stub that does not evaluate its argument, and the symbol gets dropped either way. Fixes: 43b3cf6634a4 ("drivers: net: phy: xgene: Add MDIO driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01net: phy: broadcom: rehook BCM54612E specific initRafał Miłecki
This extra BCM54612E code in PHY driver isn't really aneg specific. Even without it aneg works OK but the problem is no packets pass through PHY. Moreover putting this code inside config_aneg callback didn't allow resuming PHY correctly. When driver called phy_stop and phy_start it was putting PHY machine into RESUMING state. After that machine was switching into AN and NOLINK without ever calling phy_start_aneg. This prevented this extra setup from being called and PHY didn't work. This change has been verified to fix network on BCM47186B0 SoC device with BCM54612E. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-29net: phy: micrel: KSZ8795 do not set SUPPORTED_[Asym_]PauseSean Nyekjaer
As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two trivial overlapping changes conflicts in MPLS and mlx5. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27net: phy: broadcom: add support for BCM54210ERafał Miłecki
It's Broadcom PHY simply described as single-port RGMII 10/100/1000BASE-T PHY. It requires disabling delay skew and GTXCLK bits. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-27net: phy: micrel: add support for KSZ8795Sean Nyekjaer
This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: broadcom: drop duplicated define for RGMII SKEW delayRafał Miłecki
We had two defines for the same bit (both were used with the MII_BCM54XX_AUXCTL_SHDWSEL_MISC register). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: broadcom: use auxctl reading helper in BCM54612E codeRafał Miłecki
Starting with commit 5b4e29005123 ("net: phy: broadcom: add bcm54xx_auxctl_read") we have a reading helper so use it and avoid code duplication. It also means we don't need MII_BCM54XX_AUXCTL_SHDWSEL_MISC define as it's the same as MII_BCM54XX_AUXCTL_SHDWSEL_MISC just for reading needs (same value shifted by 12 bits). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: leds: Break dependency of phy.h on phy_led_triggers.hGeert Uytterhoeven
<linux/phy.h> includes <linux/phy_led_triggers.h>, which is not really needed. Drop the include from <linux/phy.h>, and add it to all users that didn't include it explicitly. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25net: phy: leds: Clear phy_num_led_triggers on failure to avoid crashGeert Uytterhoeven
phy_attach_direct() ignores errors returned by phy_led_triggers_register(). I think that's OK, as LED triggers can be considered a non-critical feature. However, this causes problems later: - phy_led_trigger_change_speed() will access the array phy_device.phy_led_triggers, which has been freed in the error path of phy_led_triggers_register(), which may lead to a crash. - phy_led_triggers_unregister() will access the same array, leading to crashes during s2ram or poweroff, like: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [<c04116d4>] (__list_del_entry_valid) from [<c05e8948>] (led_trigger_unregister+0x34/0xcc) [<c05e8948>] (led_trigger_unregister) from [<c05336c4>] (phy_led_triggers_unregister+0x28/0x34) [<c05336c4>] (phy_led_triggers_unregister) from [<c0531d44>] (phy_detach+0x30/0x74) [<c0531d44>] (phy_detach) from [<c0538bdc>] (sh_eth_close+0x64/0x9c) [<c0538bdc>] (sh_eth_close) from [<c04d4ce0>] (dpm_run_callback+0x48/0xc8) or: list_del corruption. prev->next should be dede6540, but was 2e323931 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:52! ... [<c02f6d70>] (__list_del_entry_valid) from [<c0425168>] (led_trigger_unregister+0x34/0xcc) [<c0425168>] (led_trigger_unregister) from [<c03a05a0>] (phy_led_triggers_unregister+0x28/0x34) [<c03a05a0>] (phy_led_triggers_unregister) from [<c039ec04>] (phy_detach+0x30/0x74) [<c039ec04>] (phy_detach) from [<c03a4fc0>] (sh_eth_close+0x6c/0xa4) [<c03a4fc0>] (sh_eth_close) from [<c0483234>] (__dev_close_many+0xac/0xd0) To fix this, clear phy_device.phy_num_led_triggers in the error path of phy_led_triggers_register() fails. Note that the "No phy led trigger registered for speed" message will still be printed on link speed changes, which is a good cue that something went wrong with the LED triggers. Fixes: 2e0bc452f4721520 ("net: phy: leds: add support for led triggers on phy link state change") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24phy: marvell: remove conflicting initializerArnd Bergmann
One line was apparently pasted incorrectly during a new feature patch: drivers/net/phy/marvell.c:2090:15: error: initialized field overwritten [-Werror=override-init] .features = PHY_GBIT_FEATURES, I'm removing the extraneous line here to avoid the W=1 warning and restore the previous flags value, and I'm slightly reordering the lines for consistency to make it less likely to happen again in the future. The ordering in the array is still not the same as in the structure definition, instead I picked the order that is most common in this file and that seems to make more sense here. Fixes: 0b04680fdae4 ("phy: marvell: Add support for temperature sensor") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24net: phy: marvell: Add Wake from LAN support for 88E1510 PHYJingju Hou
Signed-off-by: Jingju Hou <houjingj@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-23net: phy: Avoid deadlock during phy_error()Florian Fainelli
phy_error() is called in the PHY state machine workqueue context, and calls phy_trigger_machine() which does a cancel_delayed_work_sync() of the workqueue we execute from, causing a deadlock situation. Augment phy_trigger_machine() machine with a sync boolean indicating whether we should use cancel_*_sync() or just cancel_*_work(). Fixes: 3c293f4e08b5 ("net: phy: Trigger state machine on state change and not polling.") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: phy: bcm7xxx: Implement EGPHY workaround for 7278Florian Fainelli
Implement the HW design team recommended workaround in for 7278. Since the GPHY now returns its revision information in MII_PHYS_ID[23] we need to check whether the revision provided in flags is 0 or not. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: phy: bcm7xxx: Add entry for BCM7278Florian Fainelli
Add support for the BCM7278 28nm process Gigabit Ethernet PHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-20phy: marvell: Add support for temperature sensorAndrew Lunn
Some Marvell PHYs have an inbuilt temperature sensor. Add hwmon support for this sensor. There are two different variants. The simpler, older chips have a 5 degree accuracy. The newer devices have 1 degree accuracy. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-18net: phy: bcm63xx: Utilize correct config_intr functionDaniel Gonzalez Cabanelas
Commit a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") make the BCM63xx PHY driver utilize bcm_phy_config_intr() which would appear to do the right thing, except that it does not write to the MII_BCM63XX_IR register but to MII_BCM54XX_ECR which is different. This would be causing invalid link parameters and events from being generated by the PHY interrupt. Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17net: phy: dp83848: add DP83620 PHY supportAlvaro G. M
This PHY with fiber support is register compatible with DP83848, so add support for it. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-16net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface typesKaricheri, Muralidharan
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12net: mdio-gpio: Use gpio subsystem to handle low-active pinsGuenter Roeck
gpiod functions support handling low-active pins, so we can move thos code out of this driver into the gpio subsystem and simplify the code a bit. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12net: mdio-gpio: Convert to use gpiod functions where possibleGuenter Roeck
Using gpiod functions lets us use functionality which is not available with gpio functions. There is no gpiod function to match devm_gpio_request_one, so leave it in place and use gpio_to_desc() to convert absolute pin numbers to gpio descriptors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12net: mdio-gpio: Use devm_gpio_request_one instead of devm_gpio_requestGuenter Roeck
Using devm_gpio_request_one lets us request gpio pins with initial state in one go. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two AF_* families adding entries to the lockdep tables at the same time. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-11net: phy: marvell: fix Marvell 88E1512 used in SGMII modeRussell King
When an Marvell 88E1512 PHY is connected to a nic in SGMII mode, the fiber page is used for the SGMII host-side connection. The PHY driver notices that SUPPORTED_FIBRE is set, so it tries reading the fiber page for the link status, and ends up reading the MAC-side status instead of the outgoing (copper) link. This leads to incorrect results reported via ethtool. If the PHY is connected via SGMII to the host, ignore the fiber page. However, continue to allow the existing power management code to suspend and resume the fiber page. Fixes: 6cfb3bcc0641 ("Marvell phy: check link status in case of fiber link.") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: phy: Add Meson GXL PHY hardware dependencyJean Delvare
As I understand it the Meson GXL PHY driver is only useful on one architecture so only make it visible on that architecture. Signed-off-by: Jean Delvare <jdelvare@suse.de> Fixes: 7334b3e47aee ("net: phy: Add Meson GXL Internal PHY driver") Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-09phy state machine: failsafe leave invalid RUNNING stateZefir Kurtisi
While in RUNNING state, phy_state_machine() checks for link changes by comparing phydev->link before and after calling phy_read_status(). This works as long as it is guaranteed that phydev->link is never changed outside the phy_state_machine(). If in some setups this happens, it causes the state machine to miss a link loss and remain RUNNING despite phydev->link being 0. This has been observed running a dsa setup with a process continuously polling the link states over ethtool each second (SNMPD RFC-1213 agent). Disconnecting the link on a phy followed by a ETHTOOL_GSET causes dsa_slave_get_settings() / dsa_slave_get_link_ksettings() to call phy_read_status() and with that modify the link status - and with that bricking the phy state machine. This patch adds a fail-safe check while in RUNNING, which causes to move to CHANGELINK when the link is gone and we are still RUNNING. Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08mdio: Demote print from info to debug in mdio_device_registerFlorian Fainelli
While it is useful to know which MDIO device is being registered, demote the dev_info() to a dev_dbg(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06net: phy: dp83867: fix irq generationGrygorii Strashko
For proper IRQ generation by DP83867 phy the INT/PWDN pin has to be programmed as an interrupt output instead of a Powerdown input in Configuration Register 3 (CFG3), Address 0x001E, bit 7 INT_OE = 1. The current driver doesn't do this and as result IRQs will not be generated by DP83867 phy even if they are properly configured in DT. Hence, fix IRQ generation by properly configuring CFG3.INT_OE bit and ensure that Link Status Change (LINK_STATUS_CHNG_INT) and Auto-Negotiation Complete (AUTONEG_COMP_INT) interrupt are enabled. After this the DP83867 driver will work properly in interrupt enabled mode. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-20net: phy: use boolean dt properties for eee broken modesjbrunet
The patches regarding eee-broken-modes was merged before all people involved could find an agreement on the best way to move forward. While we agreed on having a DT property to mark particular modes as broken, the value used for eee-broken-modes mapped the phy register in very direct way. Because of this, the concern is that it could be used to implement configuration policies instead of describing a broken HW. In the end, having a boolean property for each mode seems to be preferred over one bit field value mapping the register (too) directly. Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-20net: phy: fix sign type error in genphy_config_eee_advertjbrunet
In genphy_config_eee_advert, the return value of phy_read_mmd_indirect is checked to know if the register could be accessed but the result is assigned to a 'u32'. Changing to 'int' to correctly get errors from phy_read_mmd_indirect. Fixes: d853d145ea3e ("net: phy: add an option to disable EEE advertisement") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10net: phy: phy drivers should not set SUPPORTED_[Asym_]PauseTimur Tabi
Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 13:10:09 +0000