summaryrefslogtreecommitdiff
path: root/drivers/net/phy/bcm7xxx.c
AgeCommit message (Collapse)Author
2021-01-07net: phy: bcm7xxx: Add an entry for BCM72116Florian Fainelli
BCM72116 features a 28nm integrated EPHY, add an entry to match this PHY OUI. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210106170944.1253046-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-21net: phy: bcm7xxx: Add an entry for BCM72113Florian Fainelli
BCM72113 features a 28nm integrated EPHY, add an entry to the driver for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18net: phy: bcm7xxx: request and manage GPHY clockFlorian Fainelli
The internal Gigabit PHY on Broadcom STB chips has a digital clock which drives its MDIO interface among other things, the driver now requests and manage that clock during .probe() and .remove() accordingly. Because the PHY driver can be probed with the clocks turned off we need to apply the dummy BMSR workaround during the driver probe function to ensure subsequent MDIO read or write towards the PHY will succeed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27net: phy: bcm7xx: add jumbo frame configuration to PHYMurali Krishna Policharla
The BCM7XX PHY family requires special configuration to pass jumbo frames. Do that during initial PHY setup. Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18net: phy: bcm7xxx: define soft_reset for 40nm EPHYDoug Berger
The internal 40nm EPHYs use a "Workaround for putting the PHY in IDDQ mode." These PHYs require a soft reset to restore functionality after they are powered back up. This commit defines the soft_reset function to use genphy_soft_reset during phy_init_hw to accommodate this. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-15net: phy: switch drivers to use dynamic feature detectionHeiner Kallweit
Recently genphy_read_abilities() has been added that dynamically detects clause 22 PHY abilities. I *think* this detection should work with all supported PHY's, at least for the ones with basic features sets, i.e. PHY_BASIC_FEATURES and PHY_GBIT_FEATURES. So let's remove setting these features explicitly and rely on phylib feature detection. I don't have access to most of these PHY's, therefore I'd appreciate regression testing. v2: - make the feature constant a comment so that readers know which features are supported by the respective PHY Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21net: phy: Move Omega PHY entry to Cygnus PHY driverFlorian Fainelli
Cygnus and Omega are part of the same business unit and product line, it makes sense to group PHY entries by products such that a platform can select only the drivers that it needs. Bring all the functionality that the BCM7XXX_28NM_GPHY() macro hides for us and remove the Omega PHY entry from bcm7xxx.c. As an added bonus, we now have a proper mdio_device_id entry to permit auto-loading. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21net: phy: Prepare for moving Omega out of bcm7xxxFlorian Fainelli
The Omega PHY entry was added to bcm7xxx.c out of convenience and this breaks the one driver per product line paradigm that was applied up until now. Since the AFE initialization is shared between Omega and BCM7xxx move the relevant functions to bcm-phy-lib.[ch]. No functional changes introduced. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07net: phy: bcm7xxx: Add entry for BCM7255Justin Chen
Add support for BCM7255 EPHY. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: phy: Add support for Broadcom Omega internal Combo GPHYArun Parameswaran
Add support for the Broadcom Omega SoC internal Combo Ethernet GPHY to the bcm7xxx phy driver. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23net: phy: broadcom: Fix bcm_write_exp()Florian Fainelli
On newer PHYs, we need to select the expansion register to write with setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior to being migrated to generic code under bcm-phy-lib.c which unfortunately used the older implementation from the BCM54xx days. Fix this by creating an inline stub: bcm_write_exp_sel() which adds the correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY and BCM7xxx PHY drivers which require setting these bits. broadcom.c is unchanged because some PHYs even use a different selector method, so let them specify it directly (e.g: SerDes secondary selector). Fixes: a1cba5613edf ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net: phy: Fix spelling mistake: "advertisment"-> "advertisement"Colin Ian King
Trivial fix to spelling mistake in comments and error message text. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-01net: phy: remove generic settings for callbacks config_aneg and read_status ↵Heiner Kallweit
from drivers Remove generic settings for callbacks config_aneg and read_status from drivers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01net: phy: bcm7xxx: make array bcm7xxx_suspend_cfg static, reduces object ↵Colin Ian King
code size Don't populate the array bcm7xxx_suspend_cfg A on the stack, instead make it static. Makes the object code smaller by over 300 bytes: Before: text data bss dec hex filename 6351 8146 0 14497 38a1 drivers/net/phy/bcm7xxx.o After: text data bss dec hex filename 5986 8210 0 14196 3774 drivers/net/phy/bcm7xxx.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: phy: bcm7xxx: add support for 28nm EPHYDoug Berger
This commit adds support for the internal fast ethernet 10/100 PHY found in the BCM7260, BCM7268, and BCM7271 devices. Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: bcm7xxx: Add BCM74371 PHY IDFlorian Fainelli
Add the BCM74371 PHY ID to the list of supported chips. This is a 28nm technology Gigabit PHY SoC. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: phy: bcm7xxx: Implement EGPHY workaround for 7278Florian Fainelli
Implement the HW design team recommended workaround in for 7278. Since the GPHY now returns its revision information in MII_PHYS_ID[23] we need to check whether the revision provided in flags is 0 or not. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: phy: bcm7xxx: Add entry for BCM7278Florian Fainelli
Add support for the BCM7278 28nm process Gigabit Ethernet PHY. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-10net: phy: phy drivers should not set SUPPORTED_[Asym_]PauseTimur Tabi
Instead of having individual PHY drivers set the SUPPORTED_Pause and SUPPORTED_Asym_Pause flags, phylib itself should set those flags, unless there is a hardware erratum or other special case. During autonegotiation, the PHYs will determine whether to enable pause frame support. Pause frames are a feature that is supported by the MAC. It is the MAC that generates the frames and that processes them. The PHY can only be configured to allow them to pass through. This commit also effectively reverts the recently applied c7a61319 ("net: phy: dp83848: Support ethernet pause frames"). So the new process is: 1) Unless the PHY driver overrides it, phylib sets the SUPPORTED_Pause and SUPPORTED_AsymPause bits in phydev->supported. This indicates that the PHY supports pause frames. 2) The MAC driver checks phydev->supported before it calls phy_start(). If (SUPPORTED_Pause | SUPPORTED_AsymPause) is set, then the MAC driver sets those bits in phydev->advertising, if it wants to enable pause frame support. 3) When the link state changes, the MAC driver checks phydev->pause and phydev->asym_pause, If the bits are set, then it enables the corresponding features in the MAC. The algorithm is: if (phydev->pause) The MAC should be programmed to receive and honor pause frames it receives, i.e. enable receive flow control. if (phydev->pause != phydev->asym_pause) The MAC should be programmed to transmit pause frames when needed, i.e. enable transmit flow control. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30net: phy: bcm7xxx: Plug in support for reading PHY error countersFlorian Fainelli
Broadcom BCM7xxx internal PHYs can leverage the Broadcom PHY library module PHY error counters helper functions, just implement the appropriate PHY driver function calls to do so. We need to allocate some storage space for our PHY statistics, and provide it to the Broadcom PHY library, so do this in a specific probe function, and slightly wrap the get_stats function call. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-24net: phy: bcm7xxx: Add support for downshift/WirespeedFlorian Fainelli
Add support for configuring the downshift/Wirespeed enable/disable toggles and specify a link retry value ranging from 1 to 9. Since the integrated BCM7xxx have issues when wirespeed is enabled and EEE is also enabled, we do disable EEE if wirespeed is enabled. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-24net: phy: broadcom: Allow enabling or disabling of EEEFlorian Fainelli
In preparation for adding support for Wirespeed/downshift, we need to change bcm_phy_eee_enable() to allow enabling or disabling EEE, so make the function take an extra enable/disable boolean parameter and rename it to illustrate it sets EEE, not necessarily just enables it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-25net: phy: bcm7xxx: Add entries for Broadcom BCM7346 and BCM7362Jaedon Shin
Add PHY entries for the Broadcom BCM7346 and BCM7362 chips, these are 40nm generation Ethernet PHY. Fixes: 815717d1473e ("net: phy: bcm7xxx: Remove wildcard entries") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/phy/bcm7xxx.c drivers/net/phy/marvell.c drivers/net/vxlan.c All three conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Reduce boilerplate code for 40nm EPHYFlorian Fainelli
Introduce a macro which helps adding new 40NM EPHY entries and reduces the amount of boilerplate code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Make MII_BCM7XX_64CLK_MDIO naming consistentFlorian Fainelli
The driver is BCM7xxx, we were missing an additional X in the constant naming, fix that to be consistent. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Remove wildcard entriesFlorian Fainelli
Remove the two wildcard entries, they serve no purpose and will match way too many devices, some of them being covered by the driver in drivers/net/phy/broadcom.c. Remove the now unused bcm7xxx_dummy_config_init() function which would produce a warning. Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Fix bcm7xxx_config_init() checkFlorian Fainelli
Since we were wrongly advertising gigabit features for these 10/100 only Ethernet PHYs, bcm7xxx_config_init() which is supposed to apply workaround would have not run since the check would be true, now that we have fixed the PHY features, remove that check since it has no reasoning to be there anymore. Fixes: e18556ee3bd83 ("net: phy: bcm7xxx: do not use PHY_BRCM_100MBPS_WAR") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Fix 40nm EPHY featuresFlorian Fainelli
The PHY entries for BCM7425/29/35 declare the 40nm Ethernet PHY as being 10/100/1000 capable, while this is just a 10/100 capable PHY device, fix that. Fixes: d068b02cfdfc2 ("net: phy: add BCM7425 and BCM7429 PHYs") Fixes: 9458ceab4917 ("net: phy: bcm7xxx: Add entry for BCM7435") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: phy: bcm7xxx: Fix shadow mode 2 disablingFlorian Fainelli
The clear and set masks in the call to phy_set_clr_bits() called from bcm7xxx_config_init() are inverted. We need to fix this by swapping the two arguments, that is, set 0 bits, but clear the shade mode 2 enable bit. Fixes: b560a58c45c66 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-25net: phy: bcm7xxx: Add entry for Broadcom BCM7435Florian Fainelli
Add a PHY entry for the Broadcom BCM7435 chips, this is a 40nm generation Ethernet PHY which is analogous to its 7425 and 7429 counter parts. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: phy: bcm7xxx: Modified to use global core register definesArun Parameswaran
Modified the bcm7xxx phy driver to remove local core register defines and use the common ones from "include/linux/brcmphy.h" Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-08net: phy: Add Broadcom phy library for common interfacesArun Parameswaran
This patch adds the Broadcom phy library to consolidate common interfaces shared by Broadcom phy's. Moved the common interfaces to the 'bcm-phy-lib.c' and updated the Broadcom PHY drivers to use the new APIs. Signed-off-by: Arun Parameswaran <arunp@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-28net: phy: bcm7xxx: workaround MDIO management controller initial readFlorian Fainelli
The initial MDIO read or write towards the BCM7xxx integrated PHY may fail, workaround this by inserting a dummy MII_BMSR read to force the MDIO management controller to see at least one valid transaction and get out of stuck state out of reset. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08net: phy: bcm7xxx: update workaround to fix 100BaseT corner casesFlorian Fainelli
Update the AFE_TX_CONFIG value to solve marginal rise/fall issues observed when the link is operating in 100BaseT. This workaround applies to GPHY revisions D0, E0 and newer. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: phy: bcm7xxx: Fix 7425 PHY ID and flagsFlorian Fainelli
While adding support for 7425 PHY in the 7xxx PHY driver, the ID that was used was actually coming from an external PHY: a BCM5461x. Fix this by using the proper ID for the internal 7425 PHY and set the PHY_IS_INTERNAL flag, otherwise consumers of this PHY driver would not be able to properly identify it as such. Fixes: d068b02cfdfc2 ("net: phy: add BCM7425 and BCM7429 PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09net: phy: bcm7xxx: add alternate id for 7439Florian Fainelli
BCM7439 has an alternate PHY OUI: 0xae025080 which is to be found in some variants of this chip. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08net: phy: bcm7xxx: add an explicit version check for GPHY rev G0Florian Fainelli
GPHY revision G0 has its version rolled over to 0x10, introduce an explicit check for that revision and invoke the proper workaround function for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: add workaround for PHY revision E0 and F0Florian Fainelli
PHY revisions E0 and F0 share the same shorter workaround initialization sequence. Dedicate a special function for these two PHY revisions to perform the needed workaround sequence. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: add PHY revision D0 workaround sequenceFlorian Fainelli
PHY revision D0 requires a specific workaround sequence which needs to be applied to get the HW to behave properly in all corner cases conditions. Do this based on the revision we just read out of the HW using a specific function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: introduce r_rc_cal_reset helperFlorian Fainelli
This function performs a R/RC calibration reset and will start being used by more than one function in the next patches, create a helper function to factor code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: drop A0 revision workaround and fix B0 workaroundFlorian Fainelli
bcm7445_config_init() was working around non-production version of the PHY HW block, so just remove it entirely. bcm7xxx_28nm_afe_config_init() was running for all PHY revisions greater than B0, but this workaround sequence is really specific to the B0 PHY revision, so rename the function accordingly and update the GPHY macro to use the generic config_init callback. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: bcm7xxx: only show PHY revision onceFlorian Fainelli
bcm7xxx_28nm_config_init() can be called as frequently as needed by the PHY library upon suspend/resume cycles and interface bring up/down, just print the PHY revision once and for all in order not to spam kernel logs. Fixes: d8ebfed3f11b ("net: phy: bcm7xxx: utilize PHY revision in config_init") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: replace phy_drivers_register callsJohan Hovold
Replace module init/exit which only calls phy_drivers_register with module_phy_driver macro. Tested using Micrel driver, and otherwise compile-tested only. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: phy: add BCM7425 and BCM7429 PHYsPetri Gynther
Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: phy: bcm7xxx: utilize PHY revision in config_initFlorian Fainelli
Now that the GENET and SF2 drivers have been updated to communicate us what is the revision of the BCM7xxx integrated PHY, utilize that information in the config_init() callback to call into the appropriate workaround function based on our revision. While at it, we also print the revision and patch level to help debug new chips. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: phy: bcm7xxx: do not use PHY_BRCM_100MBPS_WARFlorian Fainelli
There is no need for the PHY driver to check PHY_BRCM_100MBPS_WAR since that is redundant with checking the PHY device supported features. Get rid of that workaround flag. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>