summaryrefslogtreecommitdiff
path: root/drivers/net/ifb.c
AgeCommit message (Collapse)Author
2017-06-26net: add netlink_ext_ack argument to rtnl_link_ops.validateMatthias Schiffer
Add support for extended error reporting. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07net: Fix inconsistent teardown and release of private netdev state.David S. Miller
Network devices can allocate reasources and private memory using netdev_ops->ndo_init(). However, the release of these resources can occur in one of two different places. Either netdev_ops->ndo_uninit() or netdev->destructor(). The decision of which operation frees the resources depends upon whether it is necessary for all netdev refs to be released before it is safe to perform the freeing. netdev_ops->ndo_uninit() presumably can occur right after the NETDEV_UNREGISTER notifier completes and the unicast and multicast address lists are flushed. netdev->destructor(), on the other hand, does not run until the netdev references all go away. Further complicating the situation is that netdev->destructor() almost universally does also a free_netdev(). This creates a problem for the logic in register_netdevice(). Because all callers of register_netdevice() manage the freeing of the netdev, and invoke free_netdev(dev) if register_netdevice() fails. If netdev_ops->ndo_init() succeeds, but something else fails inside of register_netdevice(), it does call ndo_ops->ndo_uninit(). But it is not able to invoke netdev->destructor(). This is because netdev->destructor() will do a free_netdev() and then the caller of register_netdevice() will do the same. However, this means that the resources that would normally be released by netdev->destructor() will not be. Over the years drivers have added local hacks to deal with this, by invoking their destructor parts by hand when register_netdevice() fails. Many drivers do not try to deal with this, and instead we have leaks. Let's close this hole by formalizing the distinction between what private things need to be freed up by netdev->destructor() and whether the driver needs unregister_netdevice() to perform the free_netdev(). netdev->priv_destructor() performs all actions to free up the private resources that used to be freed by netdev->destructor(), except for free_netdev(). netdev->needs_free_netdev is a boolean that indicates whether free_netdev() should be done at the end of unregister_netdevice(). Now, register_netdevice() can sanely release all resources after ndo_ops->ndo_init() succeeds, by invoking both ndo_ops->ndo_uninit() and netdev->priv_destructor(). And at the end of unregister_netdevice(), we invoke netdev->priv_destructor() and optionally call free_netdev(). Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net-tc: convert tc_from to tc_from_ingress and tc_redirectedWillem de Bruijn
The tc_from field fulfills two roles. It encodes whether a packet was redirected by an act_mirred device and, if so, whether act_mirred was called on ingress or egress. Split it into separate fields. The information is needed by the special IFB loop, where packets are taken out of the normal path by act_mirred, forwarded to IFB, then reinjected at their original location (ingress or egress) by IFB. The IFB device cannot use skb->tc_at_ingress, because that may have been overwritten as the packet travels from act_mirred to ifb_xmit, when it passes through tc_classify on the IFB egress path. Cache this value in skb->tc_from_ingress. That field is valid only if a packet arriving at ifb_xmit came from act_mirred. Other packets can be crafted to reach ifb_xmit. These must be dropped. Set tc_redirected on redirection and drop all packets that do not have this bit set. Both fields are set only on cloned skbs in tc actions, so original packet sources do not have to clear the bit when reusing packets (notably, pktgen and octeon). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net-tc: convert tc_verd to integer bitfieldsWillem de Bruijn
Extract the remaining two fields from tc_verd and remove the __u16 completely. TC_AT and TC_FROM are converted to equivalent two-bit integer fields tc_at and tc_from. Where possible, use existing helper skb_at_tc_ingress when reading tc_at. Introduce helper skb_reset_tc to clear fields. Not documenting tc_from and tc_at, because they will be replaced with single bit fields in follow-on patches. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net-tc: extract skip classify bit from tc_verdWillem de Bruijn
Packets sent by the IFB device skip subsequent tc classification. A single bit governs this state. Move it out of tc_verd in anticipation of removing that __u16 completely. The new bitfield tc_skip_classify temporarily uses one bit of a hole, until tc_verd is removed completely in a follow-up patch. Remove the bit hole comment. It could be 2, 3, 4 or 5 bits long. With that many options, little value in documenting it. Introduce a helper function to deduplicate the logic in the two sites that check this bit. The field tc_skip_classify is set only in IFB on skbs cloned in act_mirred, so original packet sources do not have to clear the bit when reusing packets (notably, pktgen and octeon). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09ifb: support more featuresEric Dumazet
When using ifb+netem on ingress on SIT/IPIP/GRE traffic, GRO packets are not properly processed. Segmentation should not be forced, since ifb is already adding quite a performance hit. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08ifb: add multiqueue operationEric Dumazet
Add multiqueue capabilities to ifb netdevice. This removes last bottleneck for ingress when mq qdisc can be used to shard load from multiple RX queues on physical device. Tested: # netem based setup, installed at receiver side ETH=eth0 IFB=ifb10 EST="est 1sec 4sec" # Optional rate estimator RTT_HALF=2ms #REORDER=20us #LOSS="loss 1" TXQ=8 ip link add ifb10 numtxqueues $TXQ type ifb ip link set dev $IFB up tc qdisc add dev $ETH ingress 2>/dev/null tc filter add dev $ETH parent ffff: \ protocol ip u32 match u32 0 0 flowid 1:1 \ action mirred egress redirect dev $IFB tc qdisc del dev $IFB root 2>/dev/null tc qdisc add dev $IFB root handle 1: mq for i in `seq 1 $TXQ` do slot=$( printf %x $(( i )) ) tc qd add dev $IFB parent 1:$slot $EST netem \ limit 100000 delay $RTT_HALF $REORDER $LOSS done lpaa24:~# tc -s -d qd sh dev ifb10 qdisc mq 1: root Sent 316544766 bytes 5265927 pkt (dropped 0, overlimits 0 requeues 0) backlog 98880b 1648p requeues 0 qdisc netem 8002: parent 1:1 limit 100000 delay 2.0ms Sent 39601416 bytes 658721 pkt (dropped 0, overlimits 0 requeues 0) rate 38235Kbit 79657pps backlog 12240b 204p requeues 0 qdisc netem 8003: parent 1:2 limit 100000 delay 2.0ms Sent 39472866 bytes 657227 pkt (dropped 0, overlimits 0 requeues 0) rate 38234Kbit 79655pps backlog 10620b 176p requeues 0 qdisc netem 8004: parent 1:3 limit 100000 delay 2.0ms Sent 39703417 bytes 659699 pkt (dropped 0, overlimits 0 requeues 0) rate 38320Kbit 79831pps backlog 12780b 213p requeues 0 qdisc netem 8005: parent 1:4 limit 100000 delay 2.0ms Sent 39565149 bytes 658011 pkt (dropped 0, overlimits 0 requeues 0) rate 38174Kbit 79530pps backlog 11880b 198p requeues 0 qdisc netem 8006: parent 1:5 limit 100000 delay 2.0ms Sent 39506078 bytes 657354 pkt (dropped 0, overlimits 0 requeues 0) rate 38195Kbit 79571pps backlog 12480b 208p requeues 0 qdisc netem 8007: parent 1:6 limit 100000 delay 2.0ms Sent 39675994 bytes 658849 pkt (dropped 0, overlimits 0 requeues 0) rate 38323Kbit 79838pps backlog 12600b 210p requeues 0 qdisc netem 8008: parent 1:7 limit 100000 delay 2.0ms Sent 39532042 bytes 658367 pkt (dropped 0, overlimits 0 requeues 0) rate 38177Kbit 79536pps backlog 13140b 219p requeues 0 qdisc netem 8009: parent 1:8 limit 100000 delay 2.0ms Sent 39488164 bytes 657705 pkt (dropped 0, overlimits 0 requeues 0) rate 38192Kbit 79568pps backlog 13Kb 222p requeues 0 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-17act_mirred: Fix bogus header when redirecting from VLANHerbert Xu
When you redirect a VLAN device to any device, you end up with crap in af_packet on the xmit path because hard_header_len is not equal to skb->mac_len. So the redirected packet contains four extra bytes at the start which then gets interpreted as part of the MAC address. This patch fixes this by only pushing skb->mac_len. We also need to fix ifb because it tries to undo the pushing done by act_mirred. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/marvell/mvneta.c The mvneta.c conflict is a case of overlapping changes, a conversion to devm_ioremap_resource() vs. a conversion to netdev_alloc_pcpu_stats. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28ifb: Remove vlan acceleration from vlan_featuresVlad Yasevich
Do not include vlan acceleration features in vlan_features as that precludes correct Q-in-Q operation. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-06net: Explicitly initialize u64_stats_sync structures for lockdepJohn Stultz
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-11ifb: fix oops when loading the ifb faileddingtianhong
If __rtnl_link_register() return faild when loading the ifb, it will take the wrong path and get oops, so fix it just like dummy. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-10ifb: fix rcu_sched self-detected stallsdingtianhong
According to the commit 16b0dc29c1af9df341428f4c49ada4f626258082 (dummy: fix rcu_sched self-detected stalls) Eric Dumazet fix the problem in dummy, but the ifb will occur the same problem like the dummy modules. Trying to "modprobe ifb numifbs=30000" triggers : INFO: rcu_sched self-detected stall on CPU After this splat, RTNL is locked and reboot is needed. We must call cond_resched() to avoid this, even holding RTNL. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: announce STAG offload capability in some driversPatrick McHardy
- macvlan: propagate STAG filtering capabilities from underlying device - ifb: announce STAG tagging support in addition to CTAG tagging support - veth: announce STAG tagging/stripping support in addition to CTAG support Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14ifb: dont hard code inet_net useEric Dumazet
ifb should lookup devices in the appropriate namespace. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: remove NETIF_F_NO_CSUM feature bitMichał Mirosław
Only distinct use is checking if NETIF_F_NOCACHE_COPY should be enabled by default. The check heuristics is altered a bit here, so it hits other people than before. The default shouldn't be trusted for performance-critical cases anyway. For all other uses NETIF_F_NO_CSUM is equivalent to NETIF_F_HW_CSUM. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27net: Audit drivers to identify those needing IFF_TX_SKB_SHARING clearedNeil Horman
After the last patch, We are left in a state in which only drivers calling ether_setup have IFF_TX_SKB_SHARING set (we assume that drivers touching real hardware call ether_setup for their net_devices and don't hold any state in their skbs. There are a handful of drivers that violate this assumption of course, and need to be fixed up. This patch identifies those drivers, and marks them as not being able to support the safe transmission of skbs by clearning the IFF_TX_SKB_SHARING flag in priv_flags Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Karsten Keil <isdn@linux-pingi.de> CC: "David S. Miller" <davem@davemloft.net> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Patrick McHardy <kaber@trash.net> CC: Krzysztof Halasa <khc@pm.waw.pl> CC: "John W. Linville" <linville@tuxdriver.com> CC: Greg Kroah-Hartman <gregkh@suse.de> CC: Marcel Holtmann <marcel@holtmann.org> CC: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-21ifb: convert to 64 bit statsstephen hemminger
Convert input functional block device to use 64 bit stats. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-06net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-05net: call dev_alloc_name from register_netdeviceJiri Pirko
Force dev_alloc_name() to be called from register_netdevice() by dev_get_valid_name(). That allows to remove multiple explicit dev_alloc_name() calls. The possibility to call dev_alloc_name in advance remains. This also fixes veth creation regresion caused by 84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-03ifb: add performance flagsEric Dumazet
Le lundi 03 janvier 2011 à 11:40 -0800, David Miller a écrit : > From: Jarek Poplawski <jarkao2@gmail.com> > Date: Mon, 3 Jan 2011 20:37:03 +0100 > > > On Sun, Jan 02, 2011 at 09:24:36PM +0100, Eric Dumazet wrote: > >> Le mercredi 29 décembre 2010 ?? 00:07 +0100, Jarek Poplawski a écrit : > >> > >> > Ingress is before vlans handler so these features and the > >> > NETIF_F_HW_VLAN_TX flag seem useful for ifb considering > >> > dev_hard_start_xmit() checks. > >> > >> OK, here is v2 of the patch then, thanks everybody. > >> > >> > >> [PATCH v2 net-next-2.6] ifb: add performance flags > >> > >> IFB can use the full set of features flags (NETIF_F_SG | > >> NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) to > >> avoid unnecessary split of some packets (GRO for example) > >> > >> Changli suggested to also set vlan_features, > > > > He also suggested more GSO flags of which especially NETIF_F_TSO6 > > seems interesting (wrt GRO)? > > I think at least TSO6 would very much be appropriate here. Yes, why not, I am only wondering why loopback / dummy (and others ?) only set NETIF_F_TSO :) Since I want to play with ECN, I might also add NETIF_F_TSO_ECN ;) For other flags, I really doubt it can matter on ifb ? [PATCH v3 net-next-2.6] ifb: add performance flags IFB can use the full set of features flags (NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_TSO | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA) to avoid unnecessary split of some packets (GRO for example) Changli suggested to also set vlan_features, NETIF_F_TSO6, NETIF_F_TSO_ECN. Jarek suggested to add NETIF_F_HW_VLAN_TX as well. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Changli Gao <xiaosuo@gmail.com> Cc: Jarek Poplawski <jarkao2@gmail.com> Cc: Pawel Staszewski <pstaszewski@itcare.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-19ifb: use netif_receive_skb() instead of netif_rx()Eric Dumazet
In ri_tasklet(), we run from softirq, so can directly handle packet through netif_receive_skb() instead of netif_rx(). There is no risk of recursion. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16ifb: fix a lockdep splatEric Dumazet
After recent ifb changes, we must use lockless __skb_dequeue() since lock is not anymore initialized. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jamal Hadi Salim <hadi@cyberus.ca> Cc: Changli Gao <xiaosuo@gmail.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ifb: use the lockless variants of skb_queueChangli Gao
rq and tq are both protected by tx queue lock, so we can simply use the lockless variants of skb_queue. skb_queue_splice_tail_init() is used instead of the open coded and slow one. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ifb: remove unused macro TX_TIMEOUTChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10ifb: remove the useless debug statsChangli Gao
These debug stats are not exported, and become useless. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-08ifb: goto resched directly if error happens and dp->tq isn't emptyChangli Gao
If we break the loop when there are still skbs in tq and no skb in rq, the skbs will be left in txq until new skbs are enqueued into rq. In rare cases, no new skb is queued, then these skbs will stay in rq forever. After this patch, if tq isn't empty when we break the loop, we goto resched directly. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10net: trans_start cleanupsEric Dumazet
Now that core network takes care of trans_start updates, dont do it in drivers themselves, if possible. Drivers can avoid one cache miss (on dev->trans_start) in their start_xmit() handler. Exceptions are NETIF_F_LLTX drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-20net: rename skb->iif to skb->skb_iifEric Dumazet
To help grep games, rename iif to skb_iif Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-01ifb: RCU locking avoids touching dev refcountEric Dumazet
Avoids touching dev refcount in hotpath Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-22ifb: should not use __dev_get_by_index() without locksEric Dumazet
At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01netdev: convert pseudo drivers to netdev_tx_tStephen Hemminger
These are all drivers that don't touch real hardware. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05net: convert remaining non-symbolic return values in ndo_start_xmit() functionsPatrick McHardy
This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-18net: release dst entry in dev_hard_start_xmit()Eric Dumazet
One point of contention in high network loads is the dst_release() performed when a transmited skb is freed. This is because NIC tx completion calls dev_kree_skb() long after original call to dev_queue_xmit(skb). CPU cache is cold and the atomic op in dst_release() stalls. On SMP, this is quite visible if one CPU is 100% handling softirqs for a network device, since dst_clone() is done by other cpus, involving cache line ping pongs. It seems right place to release dst is in dev_hard_start_xmit(), for most devices but ones that are virtual, and some exceptions. David Miller suggested to define a new device flag, set in alloc_netdev_mq() (so that most devices set it at init time), and carefuly unset in devices which dont want a NULL skb->dst in their ndo_start_xmit(). List of devices that must clear this flag is : - loopback device, because it calls netif_rx() and quoting Patrick : "ip_route_input() doesn't accept loopback addresses, so loopback packets already need to have a dst_entry attached." - appletalk/ipddp.c : needs skb->dst in its xmit function - And all devices that call again dev_queue_xmit() from their xmit function (as some classifiers need skb->dst) : bonding, vlan, macvlan, eql, ifb, hdlc_fr Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-20netdev: add more functions to netdevice opsStephen Hemminger
This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19ifb: convert to net_device_opsStephen Hemminger
Convert to new network device ops interface. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31netdev: Fix lockdep warnings in multiqueue configurations.David S. Miller
When support for multiple TX queues were added, the netif_tx_lock() routines we converted to iterate over all TX queues and grab each queue's spinlock. This causes heartburn for lockdep and it's not a healthy thing to do with lots of TX queues anyways. So modify this to use a top-level lock and a "frozen" state for the individual TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17pkt_sched: Kill netdev_queue lock.David S. Miller
We can simply use the qdisc->q.lock for all of the qdisc tree synchronization. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-17netdev: Allocate multiple queues for TX.David S. Miller
alloc_netdev_mq() now allocates an array of netdev_queue structures for TX, based upon the queue_count argument. Furthermore, all accesses to the TX queues are now vectored through the netdev_get_tx_queue() and netdev_for_each_tx_queue() interfaces. This makes it easy to grep the tree for all things that want to get to a TX queue of a net device. Problem spots which are not really multiqueue aware yet, and only work with one queue, can easily be spotted by grepping for all netdev_get_tx_queue() calls that pass in a zero index. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: The ingress_lock member is no longer needed.David S. Miller
Every qdisc is assosciated with a queue, and in the case of ingress qdiscs that will now be netdev->rx_queue so using that queue's lock is the thing to do. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-08netdev: Move queue_lock into struct netdev_queue.David S. Miller
The lock is now an attribute of the device queue. One thing to notice is that "suspicious" places emerge which will need specific training about multiple queue handling. They are so marked with explicit "netdev->rx_queue" and "netdev->tx_queue" references. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-20[NET] ifb: set separate lockdep classes for queue locksJarek Poplawski
[ 10.536424] ======================================================= [ 10.536424] [ INFO: possible circular locking dependency detected ] [ 10.536424] 2.6.25-rc3-devel #3 [ 10.536424] ------------------------------------------------------- [ 10.536424] swapper/0 is trying to acquire lock: [ 10.536424] (&dev->queue_lock){-+..}, at: [<c0299b4a>] dev_queue_xmit+0x175/0x2f3 [ 10.536424] [ 10.536424] but task is already holding lock: [ 10.536424] (&p->tcfc_lock){-+..}, at: [<f8a67154>] tcf_mirred+0x20/0x178 [act_mirred] [ 10.536424] [ 10.536424] which lock already depends on the new lock. lockdep warns of locking order while using ifb with sch_ingress and act_mirred: ingress_lock, tcfc_lock, queue_lock (usually queue_lock is at the beginning). This patch is only to tell lockdep that ifb is a different device (e.g. from eth) and has its own pair of queue locks. (This warning is a false-positive in common scenario of using ifb; yet there are possible situations, when this order could be dangerous; lockdep should warn in such a case.) (With suggestions by David S. Miller) Reported-and-tested-by: Denys Fedoryshchenko <denys@visp.net.lb> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET] drivers/net: statistics cleanup #1 -- save memory and shrink codeJeff Garzik
We now have struct net_device_stats embedded in struct net_device, and the default ->get_stats() hook does the obvious thing for us. Run through drivers/net/* and remove the driver-local storage of statistics, and driver-local ->get_stats() hook where applicable. This was just the low-hanging fruit in drivers/net; plenty more drivers remain to be updated. [ Resolved conflicts with napi_struct changes and fix sunqe build regression... -DaveM ] Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>