summaryrefslogtreecommitdiff
path: root/drivers/net/geneve.c
AgeCommit message (Collapse)Author
2015-12-23geneve: initialize needed_headroomPaolo Abeni
Currently the needed_headroom field for the geneve device is left to the default value. This patch set it to space required for basic geneve encapsulation, so that we can avoid the skb head re-allocation on xmit. This give a 6% speedup for unsegment traffic on geneve tunnel. v1 -> v2: - add ETH_HLEN for the lower device to the needed headroom Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/geneve.c Here we had an overlapping change, where in 'net' the extraneous stats bump was being removed whilst in 'net-next' the final argument to udp_tunnel6_xmit_skb() was being changed. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16geneve: Add geneve_get_rx_port supportSinghai, Anjali
This patch adds an op that the drivers can call into to get existing geneve ports. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-16geneve: Add geneve udp port offload for ethernet devicesSinghai, Anjali
Add ndo_ops to add/del UDP ports to a device that supports geneve offload. v2: Comment fix. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-13geneve: UDP checksum configuration via netlinkTom Herbert
Add support to enable and disable UDP checksums via netlink. This is similar to how VXLAN and GUE allow this. This includes support for enabling the UDP zero checksum (for both TX and RX). Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-08geneve: Fix IPv6 xmit stats update.Pravin B Shelar
Call to iptunnel_xmit_stats() is not required after udp-tunnel6-xmit. By calling iptunnel_xmit_stats() results in incorrect device stats. Following patch drops this call. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30geneve: add IPv6 bits to geneve_fill_metadata_dstJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30geneve: handle ipv6 priority like ipv4 tosJohn W. Linville
Other callers of udp_tunnel6_xmit_skb just pass 0 for the prio argument. Jesse Gross <jesse@nicira.com> suggested that prio is really the same as IPv4's tos and should be handled the same, so this is my interpretation of that suggestion. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Jesse Gross <jesse@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30geneve: implement support for IPv6-based tunnelsJohn W. Linville
NOTE: Link-local IPv6 addresses for remote endpoints are not supported, since the driver currently has no capacity for binding a geneve interface to a specific link. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22openvswitch: Fix egress tunnel info.Pravin B Shelar
While transitioning to netdev based vport we broke OVS feature which allows user to retrieve tunnel packet egress information for lwtunnel devices. Following patch fixes it by introducing ndo operation to get the tunnel egress info. Same ndo operation can be used for lwtunnel devices and compat ovs-tnl-vport devices. So after adding such device operation we can remove similar operation from ovs-vport. Fixes: 614732eaa12d ("openvswitch: Use regular VXLAN net_device device"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-18tunnels: Don't require remote endpoint or ID during creation.Jesse Gross
Before lightweight tunnels existed, it really didn't make sense to create a tunnel that was not fully specified, such as without a destination IP address - the resulting packets would go nowhere. However, with lightweight tunnels, the opposite is true - it doesn't make sense to require this information when it will be provided later on by the route. This loosens the requirements for this information. An alternative would be to allow the relaxed version only when COLLECT_METADATA is enabled. However, since there are several variations on this theme (such as NBMA tunnels in GRE), just dropping the restrictions seems the most consistent across tunnels and with the existing configuration. CC: John Linville <linville@tuxdriver.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-23geneve: use network byte order for destination port config parameterJohn W. Linville
This is primarily for consistancy with vxlan and other tunnels which use network byte order for similar parameters. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-22geneve: ensure ECN info is handled properly in all tx/rx pathsJohn W. Linville
Partially due to a pre-exising "thinko", the new metadata-based tx/rx paths were handling ECN propagation differently than the traditional tx/rx paths. This patch removes the "thinko" (involving multiple ip_hdr assignments) on the rx path and corrects the ECN handling on both the rx and tx paths. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21geneve: remove vlan-related feature assignmentJohn W. Linville
The code handling vlan tag insertion was dropped in commit 371bd1061d29 ("geneve: Consolidate Geneve functionality in single module."). Now we need to drop the related vlan feature bits in the netdev structure. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31ip-tunnel: Use API to access tunnel metadata options.Pravin B Shelar
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Reviewed-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29geneve: Use GRO cells infrastructure.Jesse Gross
Geneve can benefit from GRO at the device level in a manner similar to other tunnels, especially as hardware offloads are still emerging. After this patch, aggregated frames are seen on the tunnel interface. Single stream throughput nearly doubles in ideal circumstances (on old hardware). Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: record IP version in tunnel infoJiri Benc
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-29ip_tunnels: convert the mode field of ip_tunnel_info to flagsJiri Benc
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: Jiri Benc <jbenc@redhat.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Move device hash table to geneve socket.Pravin B Shelar
This change simplifies Geneve Tunnel hash table management. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Consolidate Geneve functionality in single module.Pravin B Shelar
geneve_core module handles send and receive functionality. This way OVS could use the Geneve API. Now with use of tunnel meatadata mode OVS can directly use Geneve netdevice. So there is no need for separate module for Geneve. Following patch consolidates Geneve protocol processing in single module. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Add support to collect tunnel metadata.Pravin B Shelar
Following patch create new tunnel flag which enable tunnel metadata collection on given device. These devices can be used by tunnel metadata based routing or by OVS. Geneve Consolidation patch get rid of collect_md_tun to simplify tunnel lookup further. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Make dst-port configurable.Pravin B Shelar
Add netlink interface to configure Geneve UDP port number. So that user can configure it for a Gevene device. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Use skb mark and protocol to lookup route.Pravin B Shelar
On packet transmit path geneve need to lookup route. Following patch improves route lookup using more parameters. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-27geneve: Initialize ethernet address in device setup.Pravin B Shelar
Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Reviewed-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-18net: geneve: convert to using IFF_NO_QUEUEPhil Sutter
Signed-off-by: Phil Sutter <phil@nwl.cc> Cc: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01geneve: allow user to specify TOS info for tunnel framesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01geneve: allow user to specify TTL for tunnel framesJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13geneve: add initial netdev driver for GENEVE tunnelsJohn W. Linville
This is an initial implementation of a netdev driver for GENEVE tunnels. This implementation uses a fixed UDP port, and only supports point-to-point links with specific partner endpoints. Only IPv4 links are supported at this time. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 05:48:23 +0000