summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2019-07-22net: hns: fix LED configuration for marvell phyYonglong Liu
Since commit(net: phy: marvell: change default m88e1510 LED configuration), the active LED of Hip07 devices is always off, because Hip07 just use 2 LEDs. This patch adds a phy_register_fixup_for_uid() for m88e1510 to correct the LED configuration. Fixes: 077772468ec1 ("net: phy: marvell: change default m88e1510 LED configuration") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: linyunsheng <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: mvpp2: Don't check for 3 consecutive Idle frames for 10G linksMaxime Chevallier
PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21qed: Prefer pcie_capability_read_word()Frederick Lawler
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21igc: Prefer pcie_capability_read_word()Frederick Lawler
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21cxgb4: Prefer pcie_capability_read_word()Frederick Lawler
Commit 8c0d3a02c130 ("PCI: Add accessors for PCI Express Capability") added accessors for the PCI Express Capability so that drivers didn't need to be aware of differences between v1 and v2 of the PCI Express Capability. Replace pci_read_config_word() and pci_write_config_word() calls with pcie_capability_read_word() and pcie_capability_write_word(). Signed-off-by: Frederick Lawler <fred@fredlawl.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21be2net: Synchronize be_update_queues with dev_watchdogBenjamin Poirier
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21bnx2x: Prevent load reordering in tx completion processingBrian King
This patch fixes an issue seen on Power systems with bnx2x which results in the skb is NULL WARN_ON in bnx2x_free_tx_pkt firing due to the skb pointer getting loaded in bnx2x_free_tx_pkt prior to the hw_cons load in bnx2x_tx_int. Adding a read memory barrier resolves the issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21chelsio: Fix a typo in a function nameChristophe JAILLET
It is likely that 'my3216_poll()' should be 'my3126_poll()'. (1 and 2 switched in 3126. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21allocate_flower_entry: should check for null derefNavid Emamdoost
allocate_flower_entry does not check for allocation success, but tries to deref the result. I only moved the spin_lock under null check, because the caller is checking allocation's status at line 652. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21net: hns3: typo in the name of a constantChristophe JAILLET
All constant in 'enum HCLGE_MBX_OPCODE' start with HCLGE, except 'HLCGE_MBX_PUSH_VLAN_INFO' (C and L switched) s/HLC/HCL/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-20r8169: fix RTL8168g PHY initThomas Voegtle
This fixes a copy&paste error in the original patch. Setting the wrong register resulted in massive packet loss on some systems. Fixes: a2928d28643e ("r8169: use paged versions of phylib MDIO access functions") Tested-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Thomas Voegtle <tv@lio96.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19net: flow_offload: add flow_block structure and use itPablo Neira Ayuso
This object stores the flow block callbacks that are attached to this block. Update flow_block_cb_lookup() to take this new object. This patch restores the block sharing feature. Fixes: da3eeb904ff4 ("net: flow_offload: add list handling functions") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19net: flow_offload: rename tc_setup_cb_t to flow_setup_cb_tPablo Neira Ayuso
Rename this type definition and adapt users. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19net: flow_offload: remove netns parameter from flow_block_cb_alloc()Pablo Neira Ayuso
No need to annotate the netns on the flow block callback object, flow_block_cb_is_busy() already checks for used blocks. Fixes: d63db30c8537 ("net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
2019-07-18ag71xx: fix return value check in ag71xx_probe()Wei Yongjun
In case of error, the function of_get_mac_address() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18ag71xx: fix error return code in ag71xx_probe()Wei Yongjun
Fix to return error code -ENOMEM from the dmam_alloc_coherent() error handling case instead of 0, as done elsewhere in this function. Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips.Michael Chan
Unlike legacy chips, 57500 chips don't need additional VNIC resources for aRFS/ntuple. Fix the code accordingly so that we don't reserve and allocate additional VNICs on 57500 chips. Without this patch, the driver is failing to initialize when it tries to allocate extra VNICs. Fixes: ac33906c67e2 ("bnxt_en: Add support for aRFS on 57500 chips.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18gve: replace kfree with kvfreeChuhong Yuan
Variables allocated by kvzalloc should not be freed by kfree. Because they may be allocated by vmalloc. So we replace kfree with kvfree here. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18net/mlx5: Replace kfree with kvfreeChuhong Yuan
Variable allocated by kvmalloc should not be freed by kfree. Because it may be allocated by vmalloc. So replace kfree with kvfree here. Fixes: 9b1f298236057 ("net/mlx5: Add support for FW fatal reporter dump") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18liquidio: Replace vmalloc + memset with vzallocChuhong Yuan
Use vzalloc and vzalloc_node instead of using vmalloc and vmalloc_node and then zeroing the allocated memory by memset 0. This simplifies the code. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-18net: bcmgenet: use promisc for unsupported filtersJustin Chen
Currently we silently ignore filters if we cannot meet the filter requirements. This will lead to the MAC dropping packets that are expected to pass. A better solution would be to set the NIC to promisc mode when the required filters cannot be met. Also correct the number of MDF filters supported. It should be 17, not 16. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17mlxsw: spectrum: Do not process learned records with a dummy FIDIdo Schimmel
The switch periodically sends notifications about learned FDB entries. Among other things, the notification includes the FID (Filtering Identifier) and the port on which the MAC was learned. In case the driver does not have the FID defined on the relevant port, the following error will be periodically generated: mlxsw_spectrum2 0000:06:00.0 swp32: Failed to find a matching {Port, VID} following FDB notification This is not supposed to happen under normal conditions, but can happen if an ingress tc filter with a redirect action is installed on a bridged port. The redirect action will cause the packet's FID to be changed to the dummy FID and a learning notification will be emitted with this FID - which is not defined on the bridged port. Fix this by having the driver ignore learning notifications generated with the dummy FID and delete them from the device. Another option is to chain an ignore action after the redirect action which will cause the device to disable learning, but this means that we need to consume another action whenever a redirect action is used. In addition, the scenario described above is merely a corner case. Fixes: cedbb8b25948 ("mlxsw: spectrum_flower: Set dummy FID before forward action") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17mlxsw: spectrum_dcb: Configure DSCP map as the last rule is removedPetr Machata
Spectrum systems use DSCP rewrite map to update DSCP field in egressing packets to correspond to priority that the packet has. Whether rewriting will take place is determined at the point when the packet ingresses the switch: if the port is in Trust L3 mode, packet priority is determined from the DSCP map at the port, and DSCP rewrite will happen. If the port is in Trust L2 mode, 802.1p is used for packet prioritization, and no DSCP rewrite will happen. The driver determines the port trust mode based on whether any DSCP prioritization rules are in effect at given port. If there are any, trust level is L3, otherwise it's L2. When the last DSCP rule is removed, the port is switched to trust L2. Under that scenario, if DSCP of a packet should be rewritten, it should be rewritten to 0. However, when switching to Trust L2, the driver neglects to also update the DSCP rewrite map. The last DSCP rule thus remains in effect, and packets egressing through this port, if they have the right priority, will have their DSCP set according to this rule. Fix by first configuring the rewrite map, and only then switching to trust L2 and bailing out. Fixes: b2b1dab6884e ("mlxsw: spectrum: Support ieee_setapp, ieee_delapp") Signed-off-by: Petr Machata <petrm@mellanox.com> Reported-by: Alex Veber <alexve@mellanox.com> Tested-by: Alex Veber <alexve@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17net: ag71xx: Add missing headerRosen Penev
ag71xx uses devm_ioremap_nocache. This fixes usage of an implicit function Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Rosen Penev <rosenp@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16be2net: Signal that the device cannot transmit during reconfigurationBenjamin Poirier
While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time. Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open(). Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: mediatek: mtk_eth_soc: Add of_node_put() before gotoNishka Dasgupta
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: mscc: ocelot_board: Add of_node_put() before returnNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return in two places. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16net: ethernet: ti: cpsw: Add of_node_put() before return and breakNishka Dasgupta
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a return or break from the middle of the loop, there is no put, thus causing a memory leak. Hence, for function cpsw_probe_dt, create an extra label err_node_put that puts the last used node and returns ret; modify the return statements in the loop to save the return value in ret and goto this new label. For function cpsw_remove_dt, add an of_node_put before the break. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15net/mlx5e: Allow dissector meta key in tc flowerVlad Buslov
Recently, fl_flow_key->indev_ifindex int field was refactored into flow_dissector_key_meta field. With this, flower classifier also sets FLOW_DISSECTOR_KEY_META flow dissector key. However, mlx5 flower dissector validation code rejects filters that use flow dissector keys that are not supported. Add FLOW_DISSECTOR_KEY_META to the list of allowed dissector keys in __parse_cls_flower() to prevent following error when offloading flower classifier to mlx5: Error: mlx5_core: Unsupported key. Fixes: 8212ed777f40 ("net: sched: cls_flower: use flow_dissector for ingress ifindex") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15net/mlx5e: Rely on filter_dev instead of dissector keys for tunnelsVlad Buslov
Currently, tunnel attributes are parsed and inner header matching is used only when flow dissector specifies match on some of the supported encapsulation fields. When user tries to offload tc filter that doesn't match any encapsulation fields on tunnel device, mlx5 tc layer incorrectly sets to match packet header keys on encap header (outer header) and firmware rejects the rule with syndrome 0x7e1579 when creating new flow group. Change __parse_cls_flower() to determine whether tunnel is used based on fitler_dev tunnel info, instead of determining it indirectly by checking flow dissector enc keys. Fixes: bbd00f7e2349 ("net/mlx5e: Add TC tunnel release action for SRIOV offloads") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15net/mlx5e: Verify encapsulation is supportedEli Cohen
When mlx5e_attach_encap() calls mlx5e_get_tc_tun() to get the tunnel info data struct, check that returned value is not NULL, as would be in the case of unsupported encapsulation. Fixes: d386939a327d2 ("net/mlx5e: Rearrange tc tunnel code in a modular way") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-07-15ethernet: remove redundant memsetFuqian Huang
kvzalloc already zeroes the memory during the allocation. pci_alloc_consistent calls dma_alloc_coherent directly. In commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*"), dma_alloc_coherent has already zeroed the memory. So the memset after these function is not needed. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-15docs: driver-model: move it to the driver-api bookMauro Carvalho Chehab
The audience for the Kernel driver-model is clearly Kernel hackers. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> # ice driver changes
2019-07-14sky2: Disable MSI on P5W DH DeluxeTasos Sahanidis
The onboard sky2 NICs send IRQs after S3, resulting in ethernet not working after resume. Maskable MSI and MSI-X are also not supported, so fall back to INTx. Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-14sis900: correct a few typosSergej Benilov
Correct a few typos in comments and debug text. Signed-off-by: Sergej Benilov <sergej.benilov@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-14gve: Remove the exporting of gve_probeDenis Efremov
The function gve_probe is declared static and marked EXPORT_SYMBOL, which is at best an odd combination. Because the function is not used outside of the drivers/net/ethernet/google/gve/gve_main.c file it is defined in, this commit removes the EXPORT_SYMBOL() marking. Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-13r8169: fix issue with confused RX unit after PHY power-down on RTL8411bHeiner Kallweit
On RTL8411b the RX unit gets confused if the PHY is powered-down. This was reported in [0] and confirmed by Realtek. Realtek provided a sequence to fix the RX unit after PHY wakeup. The issue itself seems to have been there longer, the Fixes tag refers to where the fix applies properly. [0] https://bugzilla.redhat.com/show_bug.cgi?id=1692075 Fixes: a99790bf5c7f ("r8169: Reinstate ASPM Support") Tested-by: Ionut Radu <ionut.radu@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix excessive stack usage in cxgb4, from Arnd Bergmann. 2) Missing skb queue lock init in tipc, from Chris Packham. 3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet. 4) Elide flow dissection of local packets in FIB rules, from Petar Penkov. 5) Fix TLS support build failure in mlx5, from Tariq Toukab. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ppp: mppe: Revert "ppp: mppe: Add softdep to arc4" net: dsa: qca8k: replace legacy gpio include net: hisilicon: Use devm_platform_ioremap_resource cxgb4: reduce kernel stack usage in cudbg_collect_mem_region() tipc: ensure head->lock is initialised tc-tests: updated skbedit tests nfp: flower: ensure ip protocol is specified for L4 matches nfp: flower: fix ethernet check on match fields net/mlx5e: Provide cb_list pointer when setting up tc block on rep net: phy: make exported variables non-static net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd() davinci_cpdma: don't cast dma_addr_t to pointer net: openvswitch: do not update max_headroom if new headroom is equal to old headroom net/mlx5e: Convert single case statement switch statements into if statements net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off net/mlx5e: Fix compilation error in TLS code ipv6: fix static key imbalance in fl_create() ipv6: fix potential crash in ip6_datagram_dst_update() ipv6: tcp: fix flowlabels reflection for RST packets ...
2019-07-12net: hisilicon: Use devm_platform_ioremap_resourceJiangfeng Xiao
Use devm_platform_ioremap_resource instead of devm_ioremap_resource. Make the code simpler. Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12cxgb4: reduce kernel stack usage in cudbg_collect_mem_region()Arnd Bergmann
The cudbg_collect_mem_region() and cudbg_read_fw_mem() both use several hundred kilobytes of kernel stack space. One gets inlined into the other, which causes the stack usage to be combined beyond the warning limit when building with clang: drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c:1057:12: error: stack frame size of 1244 bytes in function 'cudbg_collect_mem_region' [-Werror,-Wframe-larger-than=] Restructuring cudbg_collect_mem_region() lets clang do the same optimization that gcc does and reuse the stack slots as it can see that the large variables are never used together. A better fix might be to avoid using cudbg_meminfo on the stack altogether, but that requires a larger rewrite. Fixes: a1c69520f785 ("cxgb4: collect MC memory dump") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12nfp: flower: ensure ip protocol is specified for L4 matchesJohn Hurley
Flower rules on the NFP firmware are able to match on an IP protocol field. When parsing rules in the driver, unknown IP protocols are only rejected when further matches are to be carried out on layer 4 fields, as the firmware will not be able to extract such fields from packets. L4 protocol dissectors such as FLOW_DISSECTOR_KEY_PORTS are only parsed if an IP protocol is specified. This leaves a loophole whereby a rule that attempts to match on transport layer information such as port numbers but does not explicitly give an IP protocol type can be incorrectly offloaded (in this case with wildcard port numbers matches). Fix this by rejecting the offload of flows that attempt to match on L4 information, not only when matching on an unknown IP protocol type, but also when the protocol is wildcarded. Fixes: 2a04784594f6 ("nfp: flower: check L4 matches on unknown IP protocols") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12nfp: flower: fix ethernet check on match fieldsJohn Hurley
NFP firmware does not explicitly match on an ethernet type field. Rather, each rule has a bitmask of match fields that can be used to infer the ethernet type. Currently, if a flower rule contains an unknown ethernet type, a check is carried out for matches on other fields of the packet. If matches on layer 3 or 4 are found, then the offload is rejected as firmware will not be able to extract these fields from a packet with an ethernet type it does not currently understand. However, if a rule contains an unknown ethernet type without any L3 (or above) matches then this will effectively be offloaded as a rule with a wildcarded ethertype. This can lead to misclassifications on the firmware. Fix this issue by rejecting all flower rules that specify a match on an unknown ethernet type. Further ensure correct offloads by moving the 'L3 and above' check to any rule that does not specify an ethernet type and rejecting rules with further matches. This means that we can still offload rules with a wildcarded ethertype if they only match on L2 fields but will prevent rules which match on further fields that we cannot be sure if the firmware will be able to extract. Fixes: af9d842c1354 ("nfp: extend flower add flow offload") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12net/mlx5e: Provide cb_list pointer when setting up tc block on repVlad Buslov
Recent refactoring of tc block offloads infrastructure introduced new flow_block_cb_setup_simple() method intended to be used as unified way for all drivers to register offload callbacks. However, commit that actually extended all users (drivers) with block cb list and provided it to flow_block infra missed mlx5 en_rep. This leads to following NULL-pointer dereference when creating Qdisc: [ 278.385175] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 278.393233] #PF: supervisor read access in kernel mode [ 278.399446] #PF: error_code(0x0000) - not-present page [ 278.405847] PGD 8000000850e73067 P4D 8000000850e73067 PUD 8620cd067 PMD 0 [ 278.414141] Oops: 0000 [#1] SMP PTI [ 278.419019] CPU: 7 PID: 3369 Comm: tc Not tainted 5.2.0-rc6+ #492 [ 278.426580] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 278.435853] RIP: 0010:flow_block_cb_setup_simple+0xc4/0x190 [ 278.442953] Code: 10 48 89 42 08 48 89 10 48 b8 00 01 00 00 00 00 ad de 49 89 00 48 05 00 01 00 00 49 89 40 08 31 c0 c3 b8 a1 ff ff ff c3 f3 c3 <48> 8b 06 48 39 c6 75 0a eb 1a 48 8b 00 48 39 c6 74 12 48 3b 50 28 [ 278.464829] RSP: 0018:ffffaf07c3f97990 EFLAGS: 00010246 [ 278.471648] RAX: 0000000000000000 RBX: ffff9b43ed4c7680 RCX: ffff9b43d5f80840 [ 278.480408] RDX: ffffffffc0491650 RSI: 0000000000000000 RDI: ffffaf07c3f97998 [ 278.489110] RBP: ffff9b43ddff9000 R08: ffff9b43d5f80840 R09: 0000000000000001 [ 278.497838] R10: 0000000000000009 R11: 00000000000003ad R12: ffffaf07c3f97c08 [ 278.506595] R13: ffff9b43d5f80000 R14: ffff9b43ed4c7680 R15: ffff9b43dfa20b40 [ 278.515374] FS: 00007f796be1b400(0000) GS:ffff9b43ef840000(0000) knlGS:0000000000000000 [ 278.525099] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 278.532453] CR2: 0000000000000000 CR3: 0000000840398002 CR4: 00000000001606e0 [ 278.541197] Call Trace: [ 278.545252] tcf_block_offload_cmd.isra.52+0x7e/0xb0 [ 278.551871] tcf_block_get_ext+0x365/0x3e0 [ 278.557569] qdisc_create+0x15c/0x4e0 [ 278.562859] ? kmem_cache_alloc_trace+0x1a2/0x1c0 [ 278.569235] tc_modify_qdisc+0x1c8/0x780 [ 278.574761] rtnetlink_rcv_msg+0x291/0x340 [ 278.580518] ? _cond_resched+0x15/0x40 [ 278.585856] ? rtnl_calcit.isra.29+0x120/0x120 [ 278.591868] netlink_rcv_skb+0x4a/0x110 [ 278.597198] netlink_unicast+0x1a0/0x250 [ 278.602601] netlink_sendmsg+0x2c1/0x3c0 [ 278.608022] sock_sendmsg+0x5b/0x60 [ 278.612969] ___sys_sendmsg+0x289/0x310 [ 278.618231] ? do_wp_page+0x99/0x730 [ 278.623216] ? page_add_new_anon_rmap+0xbe/0x140 [ 278.629298] ? __handle_mm_fault+0xc84/0x1360 [ 278.635113] ? __sys_sendmsg+0x5e/0xa0 [ 278.640285] __sys_sendmsg+0x5e/0xa0 [ 278.645239] do_syscall_64+0x5b/0x1b0 [ 278.650274] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 278.656697] RIP: 0033:0x7f796abdeb87 [ 278.661628] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 6a 2b 2c 00 48 63 d2 48 63 ff 85 c0 75 18 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 59 f3 c3 0f 1f 80 00 00 00 00 53 48 89 f3 48 [ 278.683248] RSP: 002b:00007ffde213ba48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 278.692245] RAX: ffffffffffffffda RBX: 000000005d261e6f RCX: 00007f796abdeb87 [ 278.700862] RDX: 0000000000000000 RSI: 00007ffde213bab0 RDI: 0000000000000003 [ 278.709527] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 278.718167] R10: 000000000000000c R11: 0000000000000246 R12: 0000000000000001 [ 278.726743] R13: 000000000067b580 R14: 0000000000000000 R15: 0000000000000000 [ 278.735302] Modules linked in: dummy vxlan ip6_udp_tunnel udp_tunnel sch_ingress nfsv3 nfs_acl nfs lockd grace fscache bridge stp llc sunrpc mlx5_ib ib_uverbs intel_rapl ib_core sb_edac x86_pkg_temp_ thermal intel_powerclamp coretemp kvm_intel kvm mlx5_core irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel igb ghash_clmulni_intel ses mei_me enclosure mlxfw ipmi_ssif intel_cstate iTCO_wdt ptp mei pps_core iTCO_vendor_support pcspkr joydev intel_uncore i2c_i801 ipmi_si lpc_ich intel_rapl_perf ioatdma wmi dca pcc_cpufreq ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad ast i2c_algo_bit drm_k ms_helper ttm drm mpt3sas raid_class scsi_transport_sas [ 278.802263] CR2: 0000000000000000 [ 278.807170] ---[ end trace b1f0a442a279e66f ]--- Extend en_rep with new static mlx5e_rep_block_cb_list list and pass it to flow_block_cb_setup_simple() function instead of hardcoded NULL pointer. Fixes: 955bcb6ea0df ("drivers: net: use flow block API") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12davinci_cpdma: don't cast dma_addr_t to pointerArnd Bergmann
dma_addr_t may be 64-bit wide on 32-bit architectures, so it is not valid to cast between it and a pointer: drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_submit_si': drivers/net/ethernet/ti/davinci_cpdma.c:1047:12: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_idle_submit_mapped': drivers/net/ethernet/ti/davinci_cpdma.c:1114:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] drivers/net/ethernet/ti/davinci_cpdma.c: In function 'cpdma_chan_submit_mapped': drivers/net/ethernet/ti/davinci_cpdma.c:1164:12: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] Solve this by using two separate members in 'struct submit_info'. Since this avoids the use of the 'flag' member, the structure does not even grow in typical configurations. Fixes: 6670acacd59e ("net: ethernet: ti: davinci_cpdma: add dma mapped submit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-12net/mlx5e: Convert single case statement switch statements into if statementsNathan Chancellor
During the review of commit 1ff2f0fa450e ("net/mlx5e: Return in default case statement in tx_post_resync_params"), Leon and Nick pointed out that the switch statements can be converted to single if statements that return early so that the code is easier to follow. Suggested-by: Leon Romanovsky <leon@kernel.org> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-11Merge tag 'mlx5-fixes-2019-07-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-07-11 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.15 ('net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn') For -stable v5.1 ('net/mlx5e: Fix port tunnel GRE entropy control') ('net/mlx5e: Rx, Fix checksum calculation for new hardware') ('net/mlx5e: Fix return value from timeout recover function') ('net/mlx5e: Fix error flow in tx reporter diagnose') For -stable v5.2 ('net/mlx5: E-Switch, Fix default encap mode') Conflict note: This pull request will produce a small conflict when merged with net-next. In drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c Take the hunk from net and replace: esw_offloads_steering_init(esw, vf_nvports, total_nvports); with: esw_offloads_steering_init(esw); ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-11net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usageSaeed Mahameed
Fix the following compiler warning: In function ‘esw_vport_add_ingress_acl_modify_metadata’: the frame size of 1084 bytes is larger than 1024 bytes [-Wframe-larger-than=] Since the structure is never written to, we can statically allocate it to avoid the stack usage. Fixes: 7445cfb1169c ("net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLs") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Jianbo Liu <jianbol@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-11net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is offSaeed Mahameed
In mlx5e_setup_tc "priv" variable is not being used if CONFIG_MLX5_ESWITCH is off, one way to fix this is to actually use it. mlx5e_setup_tc_mqprio also needs the "priv" variable and it extracts it on its own. We can simply pass priv to mlx5e_setup_tc_mqprio instead of netdev and avoid extracting the priv var, which will also resolve the compiler warning. Fixes: 4e95bc268b91 ("net: flow_offload: add flow_block_cb_setup_simple()") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> CC: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 02:40:05 +0000