summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2017-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) IPv6 gre tunnels end up with different default features enabled depending upon whether netlink or ioctls are used to bring them up. Fix from Alexey Kodanev. 2) Fix read past end of user control message in RDS< from Avinash Repaka. 3) Missing RCU barrier in mini qdisc code, from Cong Wang. 4) Missing policy put when reusing per-cpu route entries, from Florian Westphal. 5) Handle nested PCI errors properly in bnx2x driver, from Guilherme G. Piccoli. 6) Run nested transport mode IPSEC packets via tasklet, from Herbert Xu. 7) Fix handling poll() for stream sockets in tipc, from Parthasarathy Bhuvaragan. 8) Fix two stack-out-of-bounds issues in IPSEC, from Steffen Klassert. 9) Another zerocopy ubuf handling fix, from Willem de Bruijn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) strparser: Call sock_owned_by_user_nocheck sock: Add sock_owned_by_user_nocheck skbuff: in skb_copy_ubufs unclone before releasing zerocopy tipc: fix hanging poll() for stream sockets sctp: Replace use of sockets_allocated with specified macro. bnx2x: Improve reliability in case of nested PCI errors tg3: Enable PHY reset in MTU change path for 5720 tg3: Add workaround to restrict 5762 MRRS to 2048 tg3: Update copyright net: fec: unmap the xmit buffer that are not transferred by DMA tipc: fix tipc_mon_delete() oops in tipc_enable_bearer() error path tipc: error path leak fixes in tipc_enable_bearer() RDS: Check cmsg_len before dereferencing CMSG_DATA tcp: Avoid preprocessor directives in tracepoint macro args tipc: fix memory leak of group member when peer node is lost net: sched: fix possible null pointer deref in tcf_block_put tipc: base group replicast ack counter on number of actual receivers net_sched: fix a missing rcu barrier in mini_qdisc_pair_swap() net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround ip6_gre: fix device features for ioctl setup ...
2017-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "This is the next batch of for-rc patches from RDMA. It includes the fix for the ipoib regression I mentioned last time, and the result of a fairly major debugging effort to get iser working reliably on cxgb4 hardware - it turns out the cxgb4 driver was not handling QP error flushing properly causing iser to fail. - cxgb4 fix for an iser testing failure as debugged by Steve and Sagi. The problem was a driver bug in the handling of shutting down a QP. - Various vmw_pvrdma fixes for bogus WARN_ON, missed resource free on error unwind and a use after free bug - Improper congestion counter values on mlx5 when link aggregation is enabled - ipoib lockdep regression introduced in this merge window - hfi1 regression supporting the device in a VM introduced in a recent patch - Typo that breaks future uAPI compatibility in the verbs core - More SELinux related oops fixing - Fix an oops during error unwind in mlx5" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/mlx5: Fix mlx5_ib_alloc_mr error flow IB/core: Verify that QP is security enabled in create and destroy IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp() IB/mlx5: Serialize access to the VMA list IB/hfi: Only read capability registers if the capability exists IB/ipoib: Fix lockdep issue found on ipoib_ib_dev_heavy_flush IB/mlx5: Fix congestion counters in LAG mode RDMA/vmw_pvrdma: Avoid use after free due to QP/CQ/SRQ destroy RDMA/vmw_pvrdma: Use refcount_dec_and_test to avoid warning RDMA/vmw_pvrdma: Call ib_umem_release on destroy QP path iw_cxgb4: when flushing, complete all wrs in a chain iw_cxgb4: reflect the original WR opcode in drain cqes iw_cxgb4: Only validate the MSN for successful completions
2017-12-27bnx2x: Improve reliability in case of nested PCI errorsGuilherme G. Piccoli
While in recovery process of PCI error (called EEH on PowerPC arch), another PCI transaction could be corrupted causing a situation of nested PCI errors. Also, this scenario could be reproduced with error injection mechanisms (for debug purposes). We observe that in case of nested PCI errors, bnx2x might attempt to initialize its shmem and cause a kernel crash due to bad addresses read from MCP. Multiple different stack traces were observed depending on the point the second PCI error happens. This patch avoids the crashes by: * failing PCI recovery in case of nested errors (since multiple PCI errors in a row are not expected to lead to a functional adapter anyway), and by, * preventing access to adapter FW when MCP is failed (we mark it as failed when shmem cannot get initialized properly). Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Acked-by: Shahed Shaikh <Shahed.Shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Enable PHY reset in MTU change path for 5720Siva Reddy Kallam
A customer noticed RX path hang when MTU is changed on the fly while running heavy traffic with NCSI enabled for 5717 and 5719. Since 5720 belongs to same ASIC family, we observed same issue and same fix could solve this problem for 5720. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Add workaround to restrict 5762 MRRS to 2048Siva Reddy Kallam
One of AMD based server with 5762 hangs with jumbo frame traffic. This AMD platform has southbridge limitation which is restricting MRRS to 4000. As a work around, driver to restricts the MRRS to 2048 for this particular 5762 NX1 card. Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27tg3: Update copyrightSiva Reddy Kallam
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27net: fec: unmap the xmit buffer that are not transferred by DMAFugang Duan
The enet IP only support 32 bit, it will use swiotlb buffer to do dma mapping when xmit buffer DMA memory address is bigger than 4G in i.MX platform. After stress suspend/resume test, it will print out: log: [12826.352864] fec 5b040000.ethernet: swiotlb buffer is full (sz: 191 bytes) [12826.359676] DMA: Out of SW-IOMMU space for 191 bytes at device 5b040000.ethernet [12826.367110] fec 5b040000.ethernet eth0: Tx DMA memory map failed The issue is that the ready xmit buffers that are dma mapped but DMA still don't copy them into fifo, once MAC restart, these DMA buffers are not unmapped. So it should check the dma mapping buffer and unmap them. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-21IB/mlx5: Fix congestion counters in LAG modeMajd Dibbiny
Congestion counters are counted and queried per physical function. When working in LAG mode, CNP packets can be sent or received on both of the functions, thus congestion counters should be aggregated from the two physical functions. Fixes: e1f24a79f424 ("IB/mlx5: Support congestion related counters") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Reviewed-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-12-20Merge tag 'mlx5-fixes-2017-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: =================== Mellanox, mlx5 fixes 2017-12-19 The follwoing series includes some fixes for mlx5 core and etherent driver. Please pull and let me know if there is any problem. This series doesn't introduce any conflict with the ongoing mlx5 for-next submission. For -stable: kernels >= v4.7.y ("net/mlx5e: Fix possible deadlock of VXLAN lock") ("net/mlx5e: Add refcount to VXLAN structure") ("net/mlx5e: Prevent possible races in VXLAN control flow") ("net/mlx5e: Fix features check of IPv6 traffic") kernels >= v4.9.y ("net/mlx5: Fix error flow in CREATE_QP command") ("net/mlx5: Fix rate limit packet pacing naming and struct") kernels >= v4.13.y ("net/mlx5: FPGA, return -EINVAL if size is zero") kernels >= v4.14.y ("Revert "mlx5: move affinity hints assignments to generic code") All above patches apply and compile with no issues on corresponding -stable. =================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20nfp: bpf: keep track of the offloaded programJakub Kicinski
After TC offloads were converted to callbacks we have no choice but keep track of the offloaded filter in the driver. The check for nn->dp.bpf_offload_xdp was a stop gap solution to make sure failed TC offload won't disable XDP, it's no longer necessary. nfp_net_bpf_offload() will return -EBUSY on TC vs XDP conflicts. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20cls_bpf: fix offload assumptions after callback conversionJakub Kicinski
cls_bpf used to take care of tracking what offload state a filter is in, i.e. it would track if offload request succeeded or not. This information would then be used to issue correct requests to the driver, e.g. requests for statistics only on offloaded filters, removing only filters which were offloaded, using add instead of replace if previous filter was not added etc. This tracking of offload state no longer functions with the new callback infrastructure. There could be multiple entities trying to offload the same filter. Throw out all the tracking and corresponding commands and simply pass to the drivers both old and new bpf program. Drivers will have to deal with offload state tracking by themselves. Fixes: 3f7889c4c79b ("net: sched: cls_bpf: call block callbacks for offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: eliminate wrong call to handle rx descriptor errorYelena Krivosheev
There are few reasons in mvneta_rx_swbm() function when received packet is dropped. mvneta_rx_error() should be called only if error bit [16] is set in rx descriptor. [gregory.clement@free-electrons.com: add fixes tag] Cc: stable@vger.kernel.org Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: use proper rxq_number in loop on rx queuesYelena Krivosheev
When adding the RX queue association with each CPU, a typo was made in the mvneta_cleanup_rxqs() function. This patch fixes it. [gregory.clement@free-electrons.com: add commit log and fixes tag] Cc: stable@vger.kernel.org Fixes: 2dcf75e2793c ("net: mvneta: Associate RX queues with each CPU") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-20net: mvneta: clear interface link status on port disableYelena Krivosheev
When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement@free-electrons.com: add fixes tag] Cc: <stable@vger.kernel.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena@marvell.com> Tested-by: Dmitri Epshtein <dima@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net/mlx5: Stay in polling mode when command EQ destroy failsMoshe Shemesh
During unload, on mlx5_stop_eqs we move command interface from events mode to polling mode, but if command interface EQ destroy fail we move back to events mode. That's wrong since even if we fail to destroy command interface EQ, we do release its irq, so no interrupts will be received. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Cleanup IRQs in case of unload failureMoshe Shemesh
When mlx5_stop_eqs fails to destroy any of the eqs it returns with an error. In such failure flow the function will return without releasing all EQs irqs and then pci_free_irq_vectors will fail. Fix by only warn on destroy EQ failure and continue to release other EQs and their irqs. It fixes the following kernel trace: kernel: kernel BUG at drivers/pci/msi.c:352! ... ... kernel: Call Trace: kernel: pci_disable_msix+0xd3/0x100 kernel: pci_free_irq_vectors+0xe/0x20 kernel: mlx5_load_one.isra.17+0x9f5/0xec0 [mlx5_core] Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix steering memory leakMaor Gottlieb
Flow steering priority and namespace are software only objects that didn't have the proper destructors and were not freed during steering cleanup. Fix it by adding destructor functions for these objects. Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Prevent possible races in VXLAN control flowGal Pressman
When calling add/remove VXLAN port, a lock must be held in order to prevent race scenarios when more than one add/remove happens at the same time. Fix by holding our state_lock (mutex) as done by all other parts of the driver. Note that the spinlock protecting the radix-tree is still needed in order to synchronize radix-tree access from softirq context. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Add refcount to VXLAN structureGal Pressman
A refcount mechanism must be implemented in order to prevent unwanted scenarios such as: - Open an IPv4 VXLAN interface - Open an IPv6 VXLAN interface (different socket) - Remove one of the interfaces With current implementation, the UDP port will be removed from our VXLAN database and turn off the offloads for the other interface, which is still active. The reference count mechanism will only allow UDP port removals once all consumers are gone. Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix possible deadlock of VXLAN lockGal Pressman
mlx5e_vxlan_lookup_port is called both from mlx5e_add_vxlan_port (user context) and mlx5e_features_check (softirq), but the lock acquired does not disable bottom half and might result in deadlock. Fix it by simply replacing spin_lock() with spin_lock_bh(). While at it, replace all unnecessary spin_lock_irq() to spin_lock_bh(). lockdep's WARNING: inconsistent lock state [ 654.028136] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 654.028229] swapper/5/0 [HC0[0]:SC1[9]:HE1:SE0] takes: [ 654.028321] (&(&vxlan_db->lock)->rlock){+.?.}, at: [<ffffffffa06e7f0e>] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028528] {SOFTIRQ-ON-W} state was registered at: [ 654.028607] _raw_spin_lock+0x3c/0x70 [ 654.028689] mlx5e_vxlan_lookup_port+0x1e/0x50 [mlx5_core] [ 654.028794] mlx5e_vxlan_add_port+0x2e/0x120 [mlx5_core] [ 654.028878] process_one_work+0x1e9/0x640 [ 654.028942] worker_thread+0x4a/0x3f0 [ 654.029002] kthread+0x141/0x180 [ 654.029056] ret_from_fork+0x24/0x30 [ 654.029114] irq event stamp: 579088 [ 654.029174] hardirqs last enabled at (579088): [<ffffffff818f475a>] ip6_finish_output2+0x49a/0x8c0 [ 654.029309] hardirqs last disabled at (579087): [<ffffffff818f470e>] ip6_finish_output2+0x44e/0x8c0 [ 654.029446] softirqs last enabled at (579030): [<ffffffff810b3b3d>] irq_enter+0x6d/0x80 [ 654.029567] softirqs last disabled at (579031): [<ffffffff810b3c05>] irq_exit+0xb5/0xc0 [ 654.029684] other info that might help us debug this: [ 654.029781] Possible unsafe locking scenario: [ 654.029868] CPU0 [ 654.029908] ---- [ 654.029947] lock(&(&vxlan_db->lock)->rlock); [ 654.030045] <Interrupt> [ 654.030090] lock(&(&vxlan_db->lock)->rlock); [ 654.030162] *** DEADLOCK *** Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix error flow in CREATE_QP commandMoni Shoua
In error flow, when DESTROY_QP command should be executed, the wrong mailbox was set with data, not the one that is written to hardware, Fix that. Fixes: 09a7d9eca1a6 '{net,IB}/mlx5: QP/XRCD commands via mlx5 ifc' Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix misspelling in the error message and commentEugenia Emantayev
Fix misspelling in word syndrome. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix defaulting RX ring size when not neededEugenia Emantayev
Fixes the bug when turning on/off CQE compression mechanism resets the RX rings size to default value when it is not needed. Fixes: 2fc4bfb7250d ("net/mlx5e: Dynamic RQ type infrastructure") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix features check of IPv6 trafficGal Pressman
The assumption that the next header field contains the transport protocol is wrong for IPv6 packets with extension headers. Instead, we should look the inner-most next header field in the buffer. This will fix TSO offload for tunnels over IPv6 with extension headers. Performance testing: 19.25x improvement, cool! Measuring bandwidth of 16 threads TCP traffic over IPv6 GRE tap. CPU: Intel(R) Xeon(R) CPU E5-2660 v2 @ 2.20GHz NIC: Mellanox Technologies MT28800 Family [ConnectX-5 Ex] TSO: Enabled Before: 4,926.24 Mbps Now : 94,827.91 Mbps Fixes: b3f63c3d5e2c ("net/mlx5e: Add netdev support for VXLAN tunneling") Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5e: Fix ETS BW checkHuy Nguyen
Fix bug that allows ets bw sum to be 0% when ets tc type exists. Fixes: 08fb1dacdd76 ('net/mlx5e: Support DCBNL IEEE ETS') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: Fix rate limit packet pacing naming and structEran Ben Elisha
In mlx5_ifc, struct size was not complete, and thus driver was sending garbage after the last defined field. Fixed it by adding reserved field to complete the struct size. In addition, rename all set_rate_limit to set_pp_rate_limit to be compliant with the Firmware <-> Driver definition. Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: 1466cc5b23d1 ("net/mlx5: Rate limit tables support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19Revert "mlx5: move affinity hints assignments to generic code"Saeed Mahameed
Before the offending commit, mlx5 core did the IRQ affinity itself, and it seems that the new generic code have some drawbacks and one of them is the lack for user ability to modify irq affinity after the initial affinity values got assigned. The issue is still being discussed and a solution in the new generic code is required, until then we need to revert this patch. This fixes the following issue: echo <new affinity> > /proc/irq/<x>/smp_affinity fails with -EIO This reverts commit a435393acafbf0ecff4deb3e3cb554b34f0d0664. Note: kept mlx5_get_vector_affinity in include/linux/mlx5/driver.h since it is used in mlx5_ib driver. Fixes: a435393acafb ("mlx5: move affinity hints assignments to generic code") Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jes Sorensen <jsorensen@fb.com> Reported-by: Jes Sorensen <jsorensen@fb.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net/mlx5: FPGA, return -EINVAL if size is zeroKamal Heib
Currently, if a size of zero is passed to mlx5_fpga_mem_{read|write}_i2c() the "err" return value will not be initialized, which triggers gcc warnings: [..]/mlx5/core/fpga/sdk.c:87 mlx5_fpga_mem_read_i2c() error: uninitialized symbol 'err'. [..]/mlx5/core/fpga/sdk.c:115 mlx5_fpga_mem_write_i2c() error: uninitialized symbol 'err'. fix that. Fixes: a9956d35d199 ('net/mlx5: FPGA, Add SBU infrastructure') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Reviewed-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-12-19net: stmmac: Fix bad RX timestamp extractionFredrik Hallenberg
As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: stmmac: Fix TX timestamp calculationFredrik Hallenberg
When using GMAC4 the value written in PTP_SSIR should be shifted however the shifted value is also used in subsequent calculations which results in a bad timestamp value. Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: arc_emac: restart stalled EMACAlexander Kochetkov
Under certain conditions EMAC stop reception of incoming packets and continuously increment R_MISS register instead of saving data into provided buffer. The commit implement workaround for such situation. Then the stall detected EMAC will be restarted. On device the stall looks like the device lost it's dynamic IP address. ifconfig shows that interface error counter rapidly increments. At the same time on the DHCP server we can see continues DHCP-requests from device. In real network stalls happen really rarely. To make them frequent the broadcast storm[1] should be simulated. For simulation it is necessary to make following connections: 1. connect radxarock to 1st port of switch 2. connect some PC to 2nd port of switch 3. connect two other free ports together using standard ethernet cable, in order to make a switching loop. After that, is necessary to make a broadcast storm. For example, running on PC 'ping' to some IP address triggers ARP-request storm. After some time (~10sec), EMAC on rk3188 will stall. Observed and tested on rk3188 radxarock. [1] https://en.wikipedia.org/wiki/Broadcast_radiation Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: arc_emac: fix arc_emac_rx() error pathsAlexander Kochetkov
arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: mediatek: setup proper state for disabled GMAC on the defaultSean Wang
The current solution would setup fixed and force link of 1Gbps to the both GMAC on the default. However, The GMAC should always be put to link down state when the GMAC is disabled on certain target boards. Otherwise, the driver possibly receives unexpected data from the floating hardware connection through the unused GMAC. Although the driver had been added certain protection in RX path to get rid of such kind of unexpected data sent to the upper stack. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19mlxsw: spectrum_router: Remove batch neighbour deletion causing FW bugPetr Machata
This reverts commit 63dd00fa3e524c27cc0509190084ab147ecc8ae2. RAUHT DELETE_ALL seems to trigger a bug in FW. That manifests by later calls to RAUHT ADD of an IPv6 neighbor to fail with "bad parameter" error code. Signed-off-by: Petr Machata <petrm@mellanox.com> Fixes: 63dd00fa3e52 ("mlxsw: spectrum_router: Add batch neighbour deletion") Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19tg3: Fix rx hang on MTU change with 5717/5719Brian King
This fixes a hang issue seen when changing the MTU size from 1500 MTU to 9000 MTU on both 5717 and 5719 chips. In discussion with Broadcom, they've indicated that these chipsets have the same phy as the 57766 chipset, so the same workarounds apply. This has been tested by IBM on both Power 8 and Power 9 systems as well as by Broadcom on x86 hardware and has been confirmed to resolve the hang issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-18net: qcom/emac: Change the order of mac up and sgmii openHemanth Puranik
This patch fixes the order of mac_up and sgmii_open for the reasons noted below: - If open takes more time(if the SGMII block is not responding or if we want to do some delay based task) in this situation we will hit NETDEV watchdog - The main reason : We should signal to upper layers that we are ready to receive packets "only" when the entire path is initialized not the other way around, this is followed in the reset path where we do mac_down, sgmii_reset and mac_up. This also makes the driver uniform across the reset and open paths. - In the future there may be need for delay based tasks to be done in sgmii open which will result in NETDEV watchdog - As per the documentation the order of init should be sgmii, mac, rings and DMA Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: qcom/emac: Reduce timeout for mdio read/writeHemanth Puranik
Currently mdio read/write takes around ~115us as the timeout between status check is set to 100us. By reducing the timeout to 1us mdio read/write takes ~15us to complete. This improves the link up event response. Signed-off-by: Hemanth Puranik <hpuranik@codeaurora.org> Acked-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Increment driver versionIgor Russkikh
Add a suffix to distinguish kernel mainline version and aquantia releases Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Fix typo in ethtool statistics namesIgor Russkikh
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Update hw counters on hw initIgor Russkikh
On very first start we should read out current HW counter values to make diff based calculations later. This also should be done each time NIC gets down/up or wakes up after sleep state. We reset link state explicitly to prevent diffs from being summed this first time. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Improve link state and statistics check interval callbackIgor Russkikh
Reduce timeout from 2 secs to 1 sec. If link is down, reduce it to 500msec. This speeds up link detection. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Fill in multicast counter in ndev stats from hardwareIgor Russkikh
This metric comes from HW and is also diff-calculated, like other counters Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Fill ndev stat couters from hardwareIgor Russkikh
Originally they were filled from ring sw counters. These sometimes incorrectly calculate byte and packet amounts when using LRO/LSO and jumboframes. Filling ndev counters from hardware makes them precise. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Extend stat counters to 64bit valuesIgor Russkikh
Device hardware provides only 32bit counters. Using these directly causes byte counters to overflow soon. A separate nic level structure with 64 bit counters is now used to collect incrementally all the stats and report these counters to ethtool stats and ndev stats. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Fix hardware DMA stream overload on large MRRSIgor Russkikh
Systems with large MRRS on device (2K, 4K) with high data rates and/or large MTU, atlantic observes DMA packet buffer overflow. On some systems that causes PCIe transaction errors, hardware NMIs or datapath freeze. This patch 1) Limits MRRS from device side to 2K (thats maximum our hardware supports) 2) Limit maximum size of outstanding TX DMA data read requests. This makes hardware buffers running fine. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15net: aquantia: Fix actual speed capabilities reportingIgor Russkikh
Different hardware device Ids correspond to different maximum speed available. Extra checks were added for devices D108 and D109 to remove unsupported speeds from these device capabilities list. Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-15mlxsw: spectrum: Disable MAC learning for ovs portYuval Mintz
Learning is currently enabled for ports which are OVS slaves - even though OVS doesn't need this indication. Since we're not associating a fid with the port, HW would continuously notify driver of learned [& aged] MACs which would be logged as errors. Fixes: 2b94e58df58c ("mlxsw: spectrum: Allow ports to work under OVS master") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net/mlx4_en: Fill all counters under one call of stats lockEran Ben Elisha
Before this patch, the stats_lock was acquired twice. In between the locks Driver sent command to gather some more statistics (per priority and counter statistics). If the stats lock was acquired by get statistics NDO in between we would have report out of sync counters. Fix this by collecting all stats from Firmware in advance and then fill the Software structs under one lock. Fixes: 0b131561a7d6 ("net/mlx4_en: Add Flow control statistics display via ethtool") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net/mlx4_core: Fix wrong calculation of free countersEran Ben Elisha
The field res_free indicates the total number of counters which are available for allocation (reserved and unreserved). Fixed a bug where the reserved counters were subtracted from res_free before any allocation was performed. Before this fix, free counters which were not reserved could not be allocated. Fixes: 9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net/mlx4_en: Fix selftest for small MTUsEugenia Emantayev
Set the minimal MTU threshold for running loopback selftest. MTU should be big enough to include packet payload, NET_IP_ALIGN, Ethernet headers and preamble length. Fixes: e7c1c2c46201 ("mlx4_en: Added self diagnostics test implementation") Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 05:49:08 +0000