summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2012-09-27cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File supportVipul Pandya
This patch adds new enums and macros to enable T4 configuration file support. It also removes duplicate macro definitions. It fixes the build failure in cxgb4vf driver introduced because of old macro definition removal. It also performs SGE initialization based on T4 configuration file is provided or not. If it is provided then it uses the parameters provided in it otherwise it uses hard coded values. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4: Add functions to read memory via PCIE memory windowVipul Pandya
This patch implements two new functions t4_mem_win_read and t4_memory_read. These new functions can be used to read memory via the PCIE memory window. Please note, for proper execution of these functions PCIE_MEM_ACCESS_BASE_WIN registers must be setup correctly like how setup_memwin in the cxgb4 driver does it. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27cxgb4: Fix incorrect values for MEMWIN*_APERTURE and MEMWIN*_BASEVipul Pandya
Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27netdev: pasemi: fix return value check in pasemi_mac_phy_init()Wei Yongjun
In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24net: mipsnet: Remove the MIPSsim Ethernet driver.Steven J. Hill
The MIPSsim platform is no longer supported or used. This patch deletes the Ethernet driver. Signed-off-by: Steven J. Hill <sjhill@mips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24gianfar: Change default HW Tx queue scheduling modeClaudiu Manoil
This is primarily to address transmission timeout occurrences, when multiple H/W Tx queues are being used concurrently. Because in the priority scheduling mode the controller does not service the Tx queues equally (but in ascending index order), Tx timeouts are being triggered rightaway for a basic test with multiple simultaneous connections like: iperf -c <server_ip> -n 100M -P 8 resulting in kernel trace: NETDEV WATCHDOG: eth1 (fsl-gianfar): transmit queue <X> timed out ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:255 ... and controller reset during intense traffic, and possibly further complications. This patch changes the default H/W Tx scheduling setting (TXSCHED) for multi-queue devices, from priority scheduling mode to a weighted round robin mode with equal weights for all H/W Tx queues, and addresses the issue above. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24bnx2x: Improve code around bnx2x_tests_str_arrMerav Sicron
This patch changes the definition of bnx2x_tests_str_arr from static char pointer to static const char bi-directional array. Also the bnx2x_get_strings function is simplified. Reported-by: Joe Perches <joe@perches.com> Reported-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-24ixgbevf: Return error on failure to enable VLANAlexander Duyck
With recent kernel changes we can now return errors on a failure to setup a VLAN filter. This patch takes advantage of that opportunity so that we can return either an EIO error in the case of a mailbox failure, or an EACCESS error in the case of being denied access to the VLAN filter table by the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-24ixgbevf: Add fix to VF to handle multi-descriptor buffersAlexander Duyck
This change fixes the ixgbevf driver so that it can correctly drop a frame should it receive a jumbo frame. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-24ixgbevf: Fix AIM (Adaptive Interrupt Moderation)Greg Rose
While fixing up a patch from Alex Duyck to use q_vectors in ring containers to update the ITR I bungled it and missed actually updating the counters in the ring container q_vectors. This patch fixes my mistake and makes interrupt moderation actually work. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-24ixgbevf - Remove unused parameter in ixgbevf_receive_skbNarendra K
Remove 'rx_ring' parameter as it is not used in ixgbevf_receive_skb Signed-off-by: Narendra K <narendra_k@dell.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-24ixgbe: Do not read the spoofed packets counter when not in IOV modeGreg Rose
The counter is not valid unless the controller is running in IOV mode. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-24ixgbevf: Fix code for handling timeoutAlexander Duyck
The VF driver was not designed to correctly handle a message timeout. As a result it is possible for one bad message to invalidate all messages following it until the part is reset. Instead we should copy the example in igbvf of how to handle a mailbox event and message timeout. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22net: Make ZNET driver config depend on X86.David S. Miller
We're now using isa_virt_to_bus(), and there really isn't a generic and consistent test for whether a platform provides this interface or not. This driver is also for an x86-only device. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-22ptp: link the phc device to its parent deviceRichard Cochran
PTP Hardware Clock devices appear as class devices in sysfs. This patch changes the registration API to use the parent device, clarifying the clock's relationship to the underlying device. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-22Merge branch 'cleanup/__iomem' into next/cleanupOlof Johansson
__iomem annotation cleanup branch from Arnd. * cleanup/__iomem: (21 commits) net: seeq: use __iomem pointers for MMIO video: da8xx-fb: use __iomem pointers for MMIO scsi: eesox: use __iomem pointers for MMIO serial: ks8695: use __iomem pointers for MMIO input: rpcmouse: use __iomem pointers for MMIO ARM: samsung: use __iomem pointers for MMIO ARM: spear13xx: use __iomem pointers for MMIO ARM: sa1100: use __iomem pointers for MMIO ARM: prima2: use __iomem pointers for MMIO ARM: nomadik: use __iomem pointers for MMIO ARM: msm: use __iomem pointers for MMIO ARM: lpc32xx: use __iomem pointers for MMIO ARM: ks8695: use __iomem pointers for MMIO ARM: ixp4xx: use __iomem pointers for MMIO ARM: iop32x: use __iomem pointers for MMIO ARM: iop13xx: use __iomem pointers for MMIO ARM: integrator: use __iomem pointers for MMIO ARM: imx: use __iomem pointers for MMIO ARM: ebsa110: use __iomem pointers for MMIO ARM: at91: use __iomem pointers for MMIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-22igb: Use dma_unmap_addr and dma_unmap_len definesAlexander Duyck
This change is meant to improve performance on systems that do not require the DMA unmap calls. On those systems we do not need to make use of the unmap address for Tx or the unmap length so we can drop both thereby reducing the size of the Tx buffer info structure. In addition I have changed the logic to check for unmap length instead of unmap address when checking to see if a buffer needs to be unmapped from DMA use. The reasons for this change is that on some platforms it is possible to receive a valid DMA address of 0 from an IOMMU. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Simplify how we populate the RSS keyAlexander Duyck
Instead of storing the RSS key as a character array we can simplify the configuration by making it a u32 array. This allows us to just write one value per register without any unnecessary operations to construct the value. This change will produce the same exact key, the only difference is that I translated the u8 array to a u32 array which will be correctly ordered on writes to hardware by the cpu_to_le32 operations that are built into the writel calls. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Change how we populate the RSS indirection tableAlexander Duyck
This patch cleans up our RSS indirection table configuration so that we generate the same table regardless of CPU endianness. In addition it changes the table setup so that instead of doing a modulo based setup it is instead a divisor based setup. The advantage to this is that we should be able to take the Rx hash and compute the Rx queue with very little CPU overhead if needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Change Tx cleanup loop to do/while instead of forAlexander Duyck
This change makes it so that Tx cleanup is done in a do/while loop instead of a for loop. The main motivation behind this is the fact that we should never be invoked with a budget less than 1 so we can skip checking the budget before processing the first descriptor. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Remove logic that was doing NUMA pseudo-aware allocationsAlexander Duyck
This change removes the code that was doing the NUMA allocations for the q_vectors, rings, and ring resources. The problem is the logic used assumed that the NUMA nodes were always interleved and that is not always the case. At some point I hope to add this functionality back in a more controlled manner in the future. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Fix stats output on i210/i211 parts.Carolyn Wyborny
Due to a hardware issue, on i210 and i211 parts, the TNCRS statistic provides an invalid value. This patch changes the update stats function to increment the stat only for non-i210/i211 parts. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22igb: Change how we check for pre-existing and assigned VFsStefan Assmann
Adapt the pre-existing and assigned VFs code to the ixgbe way introduced in commit 9297127b9cdd8d30c829ef5fd28b7cc0323a7bcd. Instead of searching the enabled VFs we use pci_num_vf to determine enabled VFs. By comparing to which PF an assigned VF is owned it's possible to decide whether to leave it enabled or not. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-22Merge branch 'multiplatform/platform-data' into next/multiplatformOlof Johansson
* multiplatform/platform-data: ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions Conflicts due to removed files: arch/arm/mach-tegra/board-harmony.c arch/arm/mach-tegra/board-trimslice.c Conflicts due to code removal: arch/arm/mach-tegra/board-paz00.c Context conflicts in: drivers/mmc/host/sdhci-tegra.c drivers/net/irda/pxaficp_ir.c Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates from David Miller: "More bug fixes, nothing gets past these guys" 1) More kernel info leaks found by Mathias Krause, this time in the IPSEC configuration layers. 2) When IPSEC policies change, we do not properly make sure that cached routes (which could now be stale) throughout the system will be revalidated. Fix this by generalizing the generation count invalidation scheme used by ipv4. From Nicolas Dichtel. 3) When repairing TCP sockets, we need to allow to restore not just the send window scale, but the receive one too. Extend the existing interface to achieve this in a backwards compatible way. From Andrey Vagin. 4) A fix for FCOE scatter gather feature validation erroneously caused scatter gather to be disabled for things like AOE too. From Ed L Cashin. 5) Several cases of mishandling of error pointers, from Mathias Krause, Wei Yongjun, and Devendra Naga. 6) Fix gianfar build, from Richard Cochran. 7) CAP_NET_* failures should return -EPERM not -EACCES, from Zhao Hongjiang. 8) Hardware reset fix in janz-ican3 CAN driver, from Ira W Snyder. 9) Fix oops during rmmod in ti_hecc CAN driver, from Marc Kleine-Budde. 10) The removal of the conditional compilation of the clk support code in the stmmac driver broke things. This is because the interfaces used are the ones that don't also perform the enable/disable of the clk. Fix from Stefan Roese. 11) The QFQ packet scheduler can record out of range virtual start times, resulting later in misbehavior and even crashes. Fix from Paolo Valente. 12) If MSG_WAITALL is used with IOAT DMA under TCP, we can wedge the receiver when the advertised receive window goes to zero. Detect this case and force the processing of the IOAT DMA queue when it happens to avoid getting stuck. Fix from Michal Kubecek. 13) batman-adv assumes that test_bit() returns only 0 or 1, but this is not true for x86 (which returns -1 or 0, via the 'sbb' instruction). Fix from Linus Lussing. 14) Fix small packet corruption in e1000, from Tushar Dave. 15) make_blackhole() in the IPSEC policy code can do one read unlock too many, fix from Li RongQing. 16) The new tcp_try_coalesce() code introduced a bug in TCP URG handling, fix from Eric Dumazet. 17) Fix memory leak in __netif_receive_skb() when doing zerocopy and when hit an OOM condition. From Michael S Tsirkin. 18) netxen blindly deferences pdev->bus->self, which is not guarenteed to be non-NULL. Fix from Nikolay Aleksandrov. 19) Fix a performance regression caused by mistakes in ipv6 checksum validation in the bnx2x driver, fix from Michal Schmidt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net/stmmac: Use clk_prepare_enable and clk_disable_unprepare net: change return values from -EACCES to -EPERM net/irda: sh_sir: fix return value check in sh_sir_set_baudrate() stmmac: fix return value check in stmmac_open_ext_timer() gianfar: fix phc index build failure ipv6: fix return value check in fib6_add() bnx2x: remove false warning regarding interrupt number can: ti_hecc: fix oops during rmmod can: janz-ican3: fix support for older hardware revisions net: do not disable sg for packets requiring no checksum aoe: assert AoE packets marked as requiring no checksum at91ether: return PTR_ERR if call to clk_get fails xfrm_user: don't copy esn replay window twice for new states xfrm_user: ensure user supplied esn replay window is valid xfrm_user: fix info leak in copy_to_user_tmpl() xfrm_user: fix info leak in copy_to_user_policy() xfrm_user: fix info leak in copy_to_user_state() xfrm_user: fix info leak in copy_to_user_auth() net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 tcp: restore rcv_wscale in a repair mode (v2) ...
2012-09-21sunbmac: Remove unused local variable.David S. Miller
Commit eb716c54b1c71ad28ab20461bff831bd481066c4 ("sunbmac: remove unnecessary setting of skb->dev") caused the local varible 'dev' in bigmac_init_rings to become unused. And now the compiler warns about it. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21net/stmmac: Use clk_prepare_enable and clk_disable_unprepareStefan Roese
This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21stmmac: fix return value check in stmmac_open_ext_timer()Wei Yongjun
In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21gianfar: fix phc index build failureRichard Cochran
This patch fixes a build failure introduced in commit 66636287 ("gianfar: Support the get_ts_info ethtool method."). Not only was a global variable inconsistently named, but also it was not exported as it should have been. This fix is also needed in stable version 3.5. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-21bnx2x: remove false warning regarding interrupt numberAriel Elior
Since version 7.4 the FW configures in the pci config space the max number of interrupts available to the physical function, instead of the exact number to use. This causes a false warning in driver when comparing the number of configured interrupts to the number about to be used. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20Merge tag 'tegra-for-3.7-dmaengine' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/cleanup ARM: tegra: switch to dmaengine The Tegra code-base has contained both a legacy DMA and a dmaengine driver since v3.6-rcX. This series flips Tegra's defconfig to enable dmaengine rather than the legacy driver, and removes the legacy driver and all client code. * tag 'tegra-for-3.7-dmaengine' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: ASoC: tegra: remove support of legacy DMA driver based access spi: tegra: remove support of legacy DMA driver based access ARM: tegra: apbio: remove support of legacy DMA driver based access ARM: tegra: dma: remove legacy APB DMA driver ARM: tegra: config: enable dmaengine based APB DMA driver + sync to 3.6-rc6
2012-09-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to igb and ixgbevf. v2: updated patch description in 04 patch (ixgbevf: scheduling while atomic in reset hw path) ... Akeem G. Abodunrin (1): igb: Support to enable EEE on all eee_supported devices Alexander Duyck (2): igb: Remove artificial restriction on RQDPC stat reading ixgbevf: Add support for VF API negotiation John Fastabend (1): ixgbevf: scheduling while atomic in reset hw path ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20at91ether: return PTR_ERR if call to clk_get failsDevendra Naga
we are currently returning ENODEV, as the clk_get may give a exact error code in its returned pointer, assign it to the ret by using the PTR_ERR function, so that the subsequent goto label will jump to the error path and clean the driver and return the error correctly. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== 1. Extension to PPS/PTP to allow for PHC devices where pulses are subject to a variable but measurable delay. 2. PPS/PTP/PHC support for Solarflare boards with a timestamping peripheral. 3. MTD support for updating the timestamping peripheral on those boards. 4. Fix for potential over-length requests to firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20ixgbevf: scheduling while atomic in reset hw pathJohn Fastabend
In ixgbevf_reset_hw_vf() msleep is called while holding mbx_lock resulting in a schedule while atomic bug with trace below. This patch uses mdelay instead. BUG: scheduling while atomic: ip/6539/0x00000002 2 locks held by ip/6539: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81419cc3>] rtnl_lock+0x17/0x19 #1: (&(&adapter->mbx_lock)->rlock){+.+...}, at: [<ffffffffa0030855>] ixgbevf_reset+0x30/0xc1 [ixgbevf] Modules linked in: ixgbevf ixgbe mdio libfc scsi_transport_fc 8021q scsi_tgt garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf ipv6 uinput igb coretemp hwmon crc32c_intel ioatdma i2c_i801 shpchp microcode lpc_ich mfd_core i2c_core joydev dca pcspkr serio_raw pata_acpi ata_generic usb_storage pata_jmicron Pid: 6539, comm: ip Not tainted 3.6.0-rc3jk-net-next+ #104 Call Trace: [<ffffffff81072202>] __schedule_bug+0x6a/0x79 [<ffffffff814bc7e0>] __schedule+0xa2/0x684 [<ffffffff8108f85f>] ? trace_hardirqs_off+0xd/0xf [<ffffffff814bd0c0>] schedule+0x64/0x66 [<ffffffff814bb5e2>] schedule_timeout+0xa6/0xca [<ffffffff810536b9>] ? lock_timer_base+0x52/0x52 [<ffffffff812629e0>] ? __udelay+0x15/0x17 [<ffffffff814bb624>] schedule_timeout_uninterruptible+0x1e/0x20 [<ffffffff810541c0>] msleep+0x1b/0x22 [<ffffffffa002e723>] ixgbevf_reset_hw_vf+0x90/0xe5 [ixgbevf] [<ffffffffa0030860>] ixgbevf_reset+0x3b/0xc1 [ixgbevf] [<ffffffffa0032fba>] ixgbevf_open+0x43/0x43e [ixgbevf] [<ffffffff81409610>] ? dev_set_rx_mode+0x2e/0x33 [<ffffffff8140b0f1>] __dev_open+0xa0/0xe5 [<ffffffff814097ed>] __dev_change_flags+0xbe/0x142 [<ffffffff8140b01c>] dev_change_flags+0x21/0x56 [<ffffffff8141a843>] do_setlink+0x2e2/0x7f4 [<ffffffff81016e36>] ? native_sched_clock+0x37/0x39 [<ffffffff8141b0ac>] rtnl_newlink+0x277/0x4bb [<ffffffff8141aee9>] ? rtnl_newlink+0xb4/0x4bb [<ffffffff812217d1>] ? selinux_capable+0x32/0x3a [<ffffffff8104fb17>] ? ns_capable+0x4f/0x67 [<ffffffff81419cc3>] ? rtnl_lock+0x17/0x19 [<ffffffff81419f28>] rtnetlink_rcv_msg+0x236/0x253 [<ffffffff81419cf2>] ? rtnetlink_rcv+0x2d/0x2d [<ffffffff8142fd42>] netlink_rcv_skb+0x43/0x94 [<ffffffff81419ceb>] rtnetlink_rcv+0x26/0x2d [<ffffffff8142faf1>] netlink_unicast+0xee/0x174 [<ffffffff81430327>] netlink_sendmsg+0x26a/0x288 [<ffffffff813fb04f>] ? rcu_read_unlock+0x56/0x67 [<ffffffff813f5e6d>] __sock_sendmsg_nosec+0x58/0x61 [<ffffffff813f81b7>] __sock_sendmsg+0x3d/0x48 [<ffffffff813f8339>] sock_sendmsg+0x6e/0x87 [<ffffffff81107c9f>] ? might_fault+0xa5/0xac [<ffffffff81402a72>] ? copy_from_user+0x2a/0x2c [<ffffffff81402e62>] ? verify_iovec+0x54/0xaa [<ffffffff813f9834>] __sys_sendmsg+0x206/0x288 [<ffffffff810694fa>] ? up_read+0x23/0x3d [<ffffffff811307e5>] ? fcheck_files+0xac/0xea [<ffffffff8113095e>] ? fget_light+0x3a/0xb9 [<ffffffff813f9a2e>] sys_sendmsg+0x42/0x60 [<ffffffff814c5ba9>] system_call_fastpath+0x16/0x1b CC: Eric Dumazet <edumazet@google.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-By: Robert Garrett <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20ixgbevf: Add support for VF API negotiationAlexander Duyck
This change makes it so that the VF can support the PF/VF API negotiation protocol. Specifically in this case we are adding support for API 1.0 which will mean that the VF is capable of cleaning up buffers that span multiple descriptors without triggering an error. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20igb: Support to enable EEE on all eee_supported devicesAkeem G. Abodunrin
Current implementation enables EEE on only i350 device. This patch enables EEE on all eee_supported devices. Also, configured LPI clock to keep running before EEE is enabled on i210 and i211 devices. Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-20igb: Remove artificial restriction on RQDPC stat readingAlexander Duyck
For some reason the reading of the RQDPC register was being artificially limited to 4K. Instead of limiting the value we should read the value and add the full amount. Otherwise this can lead to a misleading number of dropped packets when the actual value is in fact much higher. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-09-19r8169: use unlimited DMA burst for TXMichal Schmidt
The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have a box where this prevents the interface from using the gigabit line to its full potential. This patch solves the problem by setting TX_DMA_BURST to unlimited. The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl (XID 0c900880). TSO is enabled. I used netperf (TCP_STREAM test) to measure the dependency of TX throughput on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024, '7'=unlimited). This chart shows the results: http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png Interesting points: - With the current DMA burst limit (1024): - at the default MTU=1500 I get only 842 Mbit/s. - when going from small MTU, the performance rises monotonically with increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's a sudden drop to 762 MBit/s from which the throughput rises monotonically again with further MTU increases. - With a smaller DMA burst limit (512): - there's a similar peak at MTU=1076 and another one at MTU=564. - With unlimited DMA burst: - at the default MTU=1500 I get nice 940 Mbit/s. - the throughput rises monotonically with increasing MTU with no strange peaks. Notice that the peaks occur at MTU sizes that are multiples of the DMA burst limit plus 52. Why 52? Because: 20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52 The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too, except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes. CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B", i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs the smaller burst limit, or if any other versions have similar requirements. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19netdev: make address const in device address managementstephen hemminger
The internal functions for add/deleting addresses don't change their argument. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19i825xx: znet: fix compiler warnings when building a 64-bit kernelMika Westerberg
When building 64-bit kernel with this driver we get following warnings from the compiler: drivers/net/ethernet/i825xx/znet.c: In function ‘hardware_init’: drivers/net/ethernet/i825xx/znet.c:863:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/net/ethernet/i825xx/znet.c:870:29: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Fix these by calling isa_virt_to_bus() before passing the pointers to set_dma_addr(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19net: seeq: use __iomem pointers for MMIOArnd Bergmann
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-19sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES requestBen Hutchings
MCDI supports requests up to 252 bytes long, which is only enough to pass 63 RX queue IDs to MC_CMD_FLUSH_RX_QUEUES. However a VF may have up to 64 RX queues, and if we try to flush them all we will generate an over-length request and BUG() in efx_mcdi_copyin(). Currently all VF drivers limit themselves to 32 RX queues, so reducing the limit to 63 does no harm. Also add a BUILD_BUG_ON in efx_mcdi_flush_rxqs() so we remember to deal with the same problem there if EFX_MAX_CHANNELS is increased. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Bump version to 3.2Ben Hutchings
The key new feature for 3.2 is PTP support. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Expose FPGA bitfile partition through MTDBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Support variable-length response to MCDI GET_BOARD_CFGBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg()Ben Hutchings
On big-endian systems the MTD partition names currently have mangled subtype numbers and are not recognised by the firmware update tool (sfupdate). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Add support for IEEE-1588 PTPStuart Hodgson
Add PTP IEEE-1588 support and make accesible via the PHC subsystem. This work is based on prior code by Andrew Jackson Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> [bwh: - Add byte order conversion in efx_ptp_send_times() - Simplify conversion of PPS event times - Add the built-in vs module check to CONFIG_SFC_PTP dependencies] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-19sfc: Fix maximum array sizes for various MCDI commandsBen Hutchings
The maximum array sizes have been calculated on the basis of a maximum SDU size of 255 bytes, whereas the actual maximum is 252 bytes. Constructing a larger SDU will result in a BUG_ON in efx_mcdi_copyin. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-18e1000: Small packets may get corrupted during padding by HWTushar Dave
On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, packets may get corrupted during padding by HW. To WA this issue, pad all small packets manually. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 01:39:23 +0000