summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2021-02-11net: mvpp2: set 802.3x GoP Flow Control modeStefan Chulski
This patch fix GMAC TX flow control autoneg. Flow control autoneg wrongly were disabled with enabled TX flow control. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add PPv23 RX FIFO flow controlStefan Chulski
New FIFO flow control feature was added in PPv23. PPv2 FIFO polled by HW and trigger pause frame if FIFO fill level is below threshold. FIFO HW flow control enabled with CM3 RXQ&BM flow control with ethtool. Current FIFO thresholds is: 9KB for port with maximum speed 10Gb/s port 4KB for port with maximum speed 5Gb/s port 2KB for port with maximum speed 1Gb/s port Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add BM protection underrun feature supportStefan Chulski
The PP2v23 hardware supports a feature allowing to double the size of BPPI by decreasing number of pools from 16 to 8. Increasing of BPPI size protect BM drop from BPPI underrun. Underrun could occurred due to stress on DDR and as result slow buffer transition from BPPE to BPPI. New BPPI threshold recommended by spec is: BPPI low threshold - 640 buffers BPPI high threshold - 832 buffers Supported only in PPv23. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add ethtool flow control configuration supportStefan Chulski
This patch add ethtool flow control configuration support. Tx flow control retrieved correctly by ethtool get function. FW per port ethtool configuration capability added. Patch also takes care about mtu change procedure, if PPv2 switch BM pools during mtu change. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add RXQ flow control configurationsStefan Chulski
This patch adds RXQ flow control configurations. Flow control disabled by default. Minimum ring size limited to 1024 descriptors. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: enable global flow controlStefan Chulski
This patch enables global flow control in FW and in the phylink validate mask. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add FCA RXQ non occupied descriptor thresholdStefan Chulski
The firmware needs to monitor the RX Non-occupied descriptor bits for flow control to move to XOFF mode. These bits need to be unmasked to be functional, but they will not raise interrupts as we leave the RX exception summary bit in MVPP2_ISR_RX_TX_MASK_REG clear. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add FCA periodic timer configurationsStefan Chulski
Flow Control periodic timer would be used if port in XOFF to transmit periodic XOFF frames. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: increase BM pool and RXQ sizeStefan Chulski
BM pool and RXQ size increased to support Firmware Flow Control. Minimum depletion thresholds to support FC are 1024 buffers. BM pool size increased to 2048 to have some 1024 buffers space between depletion thresholds and BM pool size. Jumbo frames require a 9888B buffer, so memory requirements for data buffers increased from 7MB to 24MB. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add PPv23 version definitionStefan Chulski
This patch add PPv23 version definition. PPv23 is new packet processor in CP115. Everything that supported by PPv22, also supported by PPv23. No functional changes in this stage. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: always compare hw-version vs MVPP21Stefan Chulski
Currently we have PP2v1 and PP2v2 hw-versions, with some different handlers depending upon condition hw_version = MVPP21/MVPP22. In a future there will be also PP2v3. Let's use now the generic "if equal/notEqual MVPP21" for all cases instead of "if MVPP22". This patch does not change any functionality. It is not intended to introduce PP2v3. It just modifies MVPP21/MVPP22 check-condition bringing it to generic and unified form correct for new-code introducing and PP2v3 net-next generation. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: mvpp2: add CM3 SRAM memory mapStefan Chulski
This patch adds CM3 memory map. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge tag 'mlx5-for-upstream-2021-02-10' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-for-upstream-2021-02-10 Misc cleanups and trivial fixes for net-next 1) spelling mistakes 2) error path checks fixes 3) unused includes and struct fields cleanup 4) build error when MLX5_ESWITCH=no ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: disable detection of bogus xid's 308/388Heiner Kallweit
Several years ago these two entries have been added, but it's not clear why. There's no trace that there has ever been such a chip version, and not even the r8101 vendor driver knows these id's. So let's disable detection, and if nobody complains remove them completely later. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11qede: preserve per queue stats across up/down of interfaceBhaskar Upadhaya
Here we do the initialization of coalescing values on load. per queue coalesce values are also restored across up/down of ethernet interface. Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11qede: add per queue coalesce support for qede driverBhaskar Upadhaya
per queue coalescing allows better and more finegrained control over interrupt rates. Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11qede: add netpoll support for qede driverBhaskar Upadhaya
handle netpoll case when qede_poll is called by netpoll layer with budget 0 Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: hns3: fix return of random stack valueGustavo A. R. Silva
Currently, a random stack value is being returned because variable _ret_ is not properly initialized. This variable is actually not used anymore and it should be removed. Fix this by removing all instances of variable ret and return 0. Fixes: 64749c9c38a9 ("net: hns3: remove redundant return value of hns3_uninit_all_ring()") Addresses-Coverity-ID: 1501700 ("Uninitialized scalar variable") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11net: stmmac: dwmac-intel-plat: remove unnecessary initializationNobuhiro Iwamatsu
plat_dat is initialized by stmmac_probe_config_dt(). So, initialization is not required by priv->plat. This removes unnecessary initialization and variables. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11r8169: re-configure WOL settings on resume from hibernationHeiner Kallweit
So far we don't re-configure WOL-related register bits when waking up from hibernation. I'm not aware of any problem reports, but better play safe and call __rtl8169_set_wol() in the resume() path too. To achieve this move calling __rtl8169_set_wol() to rtl8169_net_resume() and rename the function to rtl8169_runtime_resume(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer strscpy over strlcpyLijun Pan
Fix this warning: WARNING: Prefer strscpy over strlcpy - see: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: remove unused spinlock_t stats_lock definitionLijun Pan
stats_lock is no longer used. So remove it. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: add comments for spinlock_t definitionsLijun Pan
There are several spinlock_t definitions without comments. Add them. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix miscellaneous checksLijun Pan
Fix the following checkpatch checks: CHECK: Macro argument 'off' may be better as '(off)' to avoid precedence issues CHECK: Alignment should match open parenthesis CHECK: multiple assignments should be avoided CHECK: Blank lines aren't necessary before a close brace '}' CHECK: Please use a blank line after function/struct/union/enum declarations CHECK: Unnecessary parentheses around 'rc != H_FUNCTION' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: avoid multiple line dereferenceLijun Pan
Fix the following checkpatch warning: WARNING: Avoid multiple line dereference Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix bracesLijun Pan
Fix the following checkpatch warning: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: fix block commentsLijun Pan
Fix the following checkpatch warning: WARNING: networking block comments don't use an empty /* line, use /* Comment... Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11ibmvnic: prefer 'unsigned long' over 'unsigned long int'Lijun Pan
Fix the following checkpatch warnings: WARNING: Prefer 'unsigned long' over 'unsigned long int' as the int is unnecessary WARNING: Prefer 'long' over 'long int' as the int is unnecessary Signed-off-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-11Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-02-10 This series contains updates to i40e driver only. Arkadiusz adds support for software controlled DCB. Upon disabling of the firmware LLDP agent, the driver configures DCB with default values (only one Traffic Class). At the same time, it allows a software based LLDP agent - userspace application i.e. lldpad) to receive DCB TLVs and set desired DCB configuration through DCB related netlink callbacks. Aleksandr implements get and set ethtool ops for Energy Efficient Ethernet. Przemyslaw extends support for ntuple filters allowing for Flow Director IPv6 and VLAN filters. Kaixu Xia removes an unneeded assignment. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net/mlx5: SF, Fix error return code in mlx5_sf_dev_probe()Wei Yongjun
Fix to return negative error code -ENOMEM from the ioremap() error handling case instead of 0, as done elsewhere in this function. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5e: Fix error return code in mlx5e_tc_esw_init()Wei Yongjun
Fix to return negative error code from the mlx5e_tc_tun_init() error handling case instead of 0, as done elsewhere in this function. This commit also using 0 instead of 'ret' when success since it is always equal to 0. Fixes: 8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5: Fix a NULL vs IS_ERR() checkDan Carpenter
The mlx5_chains_get_table() function doesn't return NULL, it returns error pointers so we need to fix this condition. Fixes: 34ca65352ddf ("net/mlx5: E-Switch, Indirect table infrastructure") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5e: Fix tc_tun.h to verify MLX5_ESWITCH configVlad Buslov
Exclude contents of tc_tun.h header when CONFIG_MLX5_ESWITCH is disabled to prevent compile-time errors when compiling with such config. Fixes: 0d9f96471493 ("net/mlx5e: Extract tc tunnel encap/decap code to dedicated file") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5: Assign boolean values to a bool variableJiapeng Zhong
Fix the following coccicheck warnings: ./drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:575:2-14: WARNING: Assignment of 0/1 to bool variable. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5e: Fix spelling mistake "Unknouwn" -> "Unknown"Colin Ian King
There is a spelling mistake in a netdev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5e: Fix spelling mistake "channles" -> "channels"Colin Ian King
There is a spelling mistake in a netdev_warn message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5_core: remove unused including <generated/utsrelease.h>Zou Wei
Remove including <generated/utsrelease.h> that don't need it. Fixes: 17a7612b99e6 ("net/mlx5_core: Clean driver version and name") Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net/mlx5: fix spelling mistake in Kconfig "accelaration" -> "acceleration"Colin Ian King
There are some spelling mistakes in the Kconfig. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-10net: mvpp2: add an entry to skip parserStefan Chulski
This entry used when skipping the parser needed, for example, the custom header pretended to ethernet header. Suggested-by: Liron Himi <liron@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool physical link configurationChristina Jacob
Register set_link_ksetting callback with driver such that link configurations parameters like advertised mode,speed, duplex and autoneg can be configured. below command ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool physical link statusChristina Jacob
Register get_link_ksettings callback to get link status information from the driver. As virtual function (vf) shares same physical link same API is used for both the drivers and for loop back drivers simply returns the fixed values as its does not have physical link. ethtool eth3 Settings for eth3: Supported ports: [ ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full 10000baseKR/Full 1000baseX/Full Supports auto-negotiation: No Supported FEC modes: BaseR RS Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: None ethtool lbk0 Settings for lbk0: Speed: 100000Mb/s Duplex: Full Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: advertised link modes support on cgxChristina Jacob
CGX supports setting advertised link modes on physical link. This patch adds support to derive cgx mode from ethtool link mode and pass it to firmware to configure the same. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Physical link configuration supportChristina Jacob
CGX LMAC, the physical interface support link configuration parameters like speed, auto negotiation, duplex etc. Firmware saves these into memory region shared between firmware and this driver. This patch adds mailbox handler set_link_mode, fw_data_get to configure and read these parameters. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-pf: ethtool fec mode supportChristina Jacob
Add ethtool support to configure fec modes baser/rs and support to fecth FEC stats from CGX as well PHY. Configure fec mode - ethtool --set-fec eth0 encoding rs/baser/off/auto Query fec mode - ethtool --show-fec eth0 Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: Add new CGX_CMD to get PHY FEC statisticsFelix Manlunas
This patch adds support to fetch fec stats from PHY. The stats are put in the shared data struct fwdata. A PHY driver indicates that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync with firmware's enum list. Signed-off-by: Felix Manlunas <fmanlunas@marvell.com> Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10octeontx2-af: forward error correction configurationChristina Jacob
CGX block supports forward error correction modes baseR and RS. This patch adds support to set encoding mode and to read corrected/uncorrected block counters Adds new mailbox handlers set_fec to configure encoding modes and fec_stats to read counters and also increase mbox timeout to accomdate firmware command response timeout. Along with new CGX_CMD_SET_FEC command add other commands to sync with kernel enum list with firmware. Signed-off-by: Christina Jacob <cjacob@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: octeontx2: Fix the confusion in buffer alloc failure pathKevin Hao
Pavel pointed that the return of dma_addr_t in otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative error code may be returned in some cases. For a dma_addr_t, the error code such as -ENOMEM does seem a valid value, so we can't judge if the buffer allocation fail or not based on that value. Add a parameter for otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make the return value to indicate if the buffer allocation really fail or not. Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10cxgb4: collect serial config version from registerRahul Lakkireddy
Collect serial config version information directly from an internal register, instead of explicitly resizing VPD. v2: - Add comments on info stored in PCIE_STATIC_SPARE2 register. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10i40e: remove the useless value assignment in i40e_clean_adminq_subtaskKaixu Xia
The variable ret is overwritten by the following call i40e_clean_arq_element() and the assignment is useless, so remove it. Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10i40e: VLAN field for flow directorPrzemyslaw Patynowski
Allow user to specify VLAN field and add it to flow director. Show VLAN field in "ethtool -n ethx" command. Handle VLAN type and tag field provided by ethtool command. Refactored filter addition, by replacing static arrays with runtime dummy packet creation, which allows specifying VLAN field. Previously, VLAN field was omitted. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 05:02:16 +0000