summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/stmicro
AgeCommit message (Collapse)Author
2017-03-28stmmac: use netif_set_real_num_{rx,tx}_queuesArnd Bergmann
A driver must not access the two fields directly but should instead use the helper functions to set the values and keep a consistent internal state: ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe': ethernet/stmicro/stmmac/stmmac_main.c:4083:8: error: 'struct net_device' has no member named 'real_num_rx_queues'; did you mean 'real_num_tx_queues'? Fixes: a8f5102af2a7 ("net: stmmac: TX and RX queue priority configuration") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: stmmac: add set_mac to the stmmac_opsLABBE Corentin
Two different set_mac functions exists but stmmac_dwmac4_set_mac() is only used for enabling and never for disabling. So on dwmac4, the MAC RX/TX is never disabled. This patch add a generic function pointer set_mac() to stmmac_ops and replace all call to stmmac_set_mac/stmmac_dwmac4_set_mac by a call to this pointer. Since dwmac4_ops is const, set_mac cannot be modified after, and so dwmac4_ops is duplioacted like dwmac4_dma_ops. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: stmmac: fix dma operation mode config for older versionsJoao Pinto
The dma operation mode configuration routine was wrongly moved to a function (stmmac_mtl_configuration) that is only executed if the core version is >= 4.00. Fixes: 6deee2221e11 ("net: stmmac: prepare dma op mode config for multiple queues") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: stmmac: Restore DT backwards-compatibilityThierry Reding
Recent changes to support multiple queues in the device tree bindings resulted in the number of RX and TX queues to be initialized to zero for device trees not adhering to the new bindings. Restore backwards-compatibility with those device trees by falling back to a single RX and TX queues each. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22net: stmmac: Always enable MAC RX queuesThierry Reding
The MAC RX queues always need to be enabled in order to receive network packets. Remove the condition that this only needs to be done for multi- queue configurations. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: RX queue routing configurationJoao Pinto
This patch adds the configuration of RX queues' routing. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: TX and RX queue priority configurationJoao Pinto
This patch adds the configuration of RX and TX queues' priority. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: enable multiple buffersJoao Pinto
This patch creates 2 new structures (stmmac_tx_queue and stmmac_rx_queue) in include/linux/stmmac.h, enabling that each RX and TX queue has its own buffers and data. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: stmmac interrupt treatment prepared for multiple queuesJoao Pinto
This patch prepares the main ISR for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: tso init prepared for multiple queuesJoao Pinto
This patch configures TSO for all available tx queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: dma channel init prepared for multiple queuesJoao Pinto
This patch prepares the DMA initialization process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare rx/tx set tail function for multiple queuesJoao Pinto
This patch prepares RX and TX set tail functions for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx and tx ring length prepared for multiple queuesJoao Pinto
This patch prepares tx and rx ring length configuration for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx watchdog config prepared for multiple queuesJoao Pinto
This patch adds rx watchdog configuration for all queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma interrupt treatment for multiple queuesJoao Pinto
This patch prepares DMA interrupts treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare stmmac_tx_err for multiple queuesJoao Pinto
This patch prepares stmmac_err for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx/tx dma start/stop prepared for multiple queuesJoao Pinto
This patch prepares the RX/TX DMA stop/start process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: enable/disable dma irq prepared for multiple queuesJoao Pinto
This patch prepares the DMA IRQ enable/disable process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma op mode config for multiple queuesJoao Pinto
This patch prepares DMA Operation Mode configuration for multiple queues. The work consisted on breaking the DMA operation Mode configuration function into RX and TX scope and adapting its mechanism in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: stmmac: added default rx queue size in stmmac_dma_interruptJoao Pinto
This patch adds the rx queue default size when dma interrupts are treated, since dma op mode can be also set there. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13net: stmmac: set default number of rx and tx queues in stmmac_pciJoao Pinto
This patch configures default number of RX and TX queues when using the pci glue driver. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configuration of CBS in case of a TX AVB queueJoao Pinto
This patch adds the configuration of the AVB Credit-Based Shaper. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mac debug prepared for multiple queuesJoao Pinto
This patch prepares mac debug dump for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: prepare irq_status for mtlJoao Pinto
This patch prepares mac irq status treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: flow_ctrl functions adapted to mtlJoao Pinto
This patch adapts flow_ctrl function to prepare it for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mapping mtl rx to dma channelJoao Pinto
This patch adds the functionality of RX queue to dma channel mapping based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mtl rx queue enabled as dcb or avbJoao Pinto
This patch introduces the enabling of RX queues as DCB or as AVB based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure tx queue weightJoao Pinto
This patch adds TX queues weight programming. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure mtl rx and tx algorithmsJoao Pinto
This patch adds the RX and TX scheduling algorithms programming. It introduces the multiple queues configuration function (stmmac_mtl_configuration) in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: multiple queues dt configurationJoao Pinto
This patch adds the multiple queues configuration in the Device Tree. It was also created a set of structures to keep the RX and TX queues configurations to be used in the driver. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: dwc-qos: Add Tegra186 supportThierry Reding
The NVIDIA Tegra186 SoC contains an instance of the Synopsys DWC ethernet QOS IP core. The binding that it uses is slightly different from existing ones because of the integration (clocks, resets, ...). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: dwc-qos: Split out ->probe() and ->remove()Thierry Reding
Split out the binding specific parts of ->probe() and ->remove() to enable the driver to support variants of the binding. This is useful in order to keep backwards-compatibility while making it easy for a sub- driver to deal only with the updated bindings rather than having to add compatibility quirks all over the place. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Program RX queue size and flow controlThierry Reding
Program the receive queue size based on the RX FIFO size and enable hardware flow control for large FIFOs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Parse FIFO sizes from feature registersThierry Reding
New version of this core encode the FIFO sizes in one of the feature registers. Use these sizes as default, but still allow device tree to override them for backwards compatibility. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Check for DMA mapping errorsThierry Reding
When DMA mapping an SKB fragment, the mapping must be checked for errors, otherwise the DMA debug code will complain upon unmap. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Balance PTP reference clock enable/disableThierry Reding
clk_prepare_enable() and clk_disable_unprepare() for this clock aren't properly balanced, which can trigger a WARN_ON() in the common clock framework. Reviewed-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Disable PTP reference clock on errorThierry Reding
If an error occurs while opening the device, make sure to disable the PTP reference clock. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Stop PHY and remove TX timer on errorThierry Reding
If an error occurs while opening the device, make sure that both the TX timer and the PHY are properly cleaned up. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Rename clk_ptp_ref clock to ptp_refThierry Reding
There aren't currently any users of the "clk_ptp_ref", but there are other references to "ptp_ref", so I'm leaning towards considering that a typo. Fix it. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-09net: stmicro: replace kzalloc with devm_kzallocJoao Pinto
The axi variable was not being freed upon device removal. With devm_kzalloc it ensures that it is properly freed. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-24net: stmmac: unify registers dumps methodsLABBE Corentin
The stmmac driver have two methods for registers dumps: via ethtool and at init (if NETIF_MSG_HW is enabled). It is better to keep only one method, ethtool, since the other was ugly. This patch convert all dump_regs() function from "printing regs" to "fill the reg_space used by ethtool". Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19net: ethernet: stmmac: dwmac-rk: Add RK3328 gmac supportdavid.wu
Add constants and callback functions for the dwmac on rk3328 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: david.wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: invert the logic for dumping regsLABBE Corentin
It is easier to follow the logic by removing the not operator Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: reduce indentation by adding a continueLABBE Corentin
As suggested by Joe Perches, replacing the "if phydev" logic permit to reduce indentation in the for loop. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: split the stmmac_adjust_link 10/100 caseLABBE Corentin
The 10/100 case have too many ifcase. This patch split it for removing an if. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: run stmmac_hw_fix_mac_speed when speed is validLABBE Corentin
This patch mutualise a bit by running stmmac_hw_fix_mac_speed() after the switch in case of valid speed. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: set speed at SPEED_UNKNOWN in case of broken speedLABBE Corentin
In case of invalid speed given, stmmac_adjust_link() still record it as current speed. This patch modify the default case to set speed as SPEED_UNKNOWN if not 10/100/1000. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: use SPEED_UNKNOWN/DUPLEX_UNKNOWNLABBE Corentin
It is better to use DUPLEX_UNKNOWN instead of just "-1". Using 0 for an invalid speed is bad since 0 is a valid value for speed. So this patch replace 0 by SPEED_UNKNOWN. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: likely is useless in occasional functionLABBE Corentin
The stmmac_adjust_link() function is called too rarely for having likely() macros being useful. Just remove likely annotation in it. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15net: stmmac: remove useless parenthesisLABBE Corentin
This patch remove some useless parenthesis. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 03:36:28 +0000