summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/netronome
AgeCommit message (Collapse)Author
2017-03-03nfp: correct DMA direction in XDP DMA syncJakub Kicinski
dma_sync_single_for_*() takes the direction in which the buffer was mapped, not the direction of the sync. We should sync XDP buffers bidirectionally. Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-03nfp: don't tell FW about the reserved buffer spaceJakub Kicinski
Since commit c0f031bc8866 ("nfp_net: use alloc_frag() and build_skb()") we are allocating buffers which have to hold both the data and skb to be created in place by build_skb(). FW should only be told about the buffer space it can DMA to, that is without the build_skb() headroom and tailroom. Note: firmware applications should validate the buffers against both MTU and free list buffer size so oversized packets would not pass through the NIC anyway. Fixes: c0f031bc8866 ("nfp: use alloc_frag() and build_skb()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: allow application firmware to limit number of SR-IOV VFsJakub Kicinski
Some application firmware projects may choose to limit the number of VFs available below what is specified in PCI capability to be able to reuse the PCIe interface resources. There may also be projects which use cases don't require SR-IOV support at all and therefore don't want to spend time implementing/testing it. Check nfd_vf_cfg_max_vfs firmware symbol to see if application firmware is reporting how many VFs it supports. This mechanism is an opt-in, if symbol is not present we will only look at the PCI capability values. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: return nfp_rtsym_read_le() errors correctlyJakub Kicinski
nfp_rtsym_read_le() has an out parameter for error codes. We have to use that instead of returning errors directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: add very basic access to NSP logsJakub Kicinski
Allow dumping "arm.diag" resource with ethtool -w. This resource should contain a text log of the NSP (control processor) application. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: report NSP ABI version in ethtool FW versionJakub Kicinski
ethtool_drvinfo->fw_version can cantain multiple FW strings. We already report NFD ABI version there, add NSP ABI version if available (i.e. on PF) with 'sp:' prefix. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: store NSP ABI version in state structureJakub Kicinski
We read the status register on each NSP open, we can store the NSP ABI version in the state structure so that we don't have to read it again. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: report manufacturing info on loadJakub Kicinski
Report card manufacturing information when driver loads. These identify the version of the board and its subcomponents. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20nfp: refactor NSP initialization and add error messageJakub Kicinski
When acquiring NSP communication resource fails user is left with "probe failed with error -2" PCI code message but no info on what caused the problem. Some development boards may not have NSP FW in the flash image. Help users with a more verbouse message. While at it move the whole NSP init to a separate function to keep .probe() callback nice and simple. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-17nfp: Use PCI_DEVICE_ID_NETRONOME_NFP* definesSimon Horman
Use PCI_DEVICE_ID_NETRONOME_NFP*, defined in linux/pci_ids.h, rather than replicating the same values in the NFP driver. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add the PF driverJakub Kicinski
Add PF driver for NFP4000 and NFP6000. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: allocate irqs in lower driverJakub Kicinski
PF services multiple ports using single PCI device therefore IRQs can no longer be allocated in the netdev code. Lower portion of the driver has to allocate the IRQs and hand them out to ports. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add port layer to debugfs directoriesJakub Kicinski
PF driver will support multiple ports per PCI device, add port number to DebugFS paths. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add support for service processor accessJakub Kicinski
NFP Service Processor (NSP) is an ARM core inside the chip which is responsible for management and control functions. Add support for chip reset, FW load and external module access using the NSP. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add rtsym supportJakub Kicinski
Add support for using application FW symbol table to look up location of information in device memory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add MIP reading supportJakub Kicinski
MIP is a vector of information which linker can optionally include in application firmware. It will be used to retrieve the location of symbol tables. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add support for reading nffw infoJakub Kicinski
NFFW info is a resource which contains information about the loaded application firmware. Add code which will allow us to decode it and retrieve MIP location. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add hwinfo supportJakub Kicinski
Hwinfo is a simple key=value store of information which is read from the flash and populated during chip power on. Add code to look up information in it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add support for resourcesJakub Kicinski
Resource table is an array placed in a well defined location in device's memory which describes device resources and contains locks which have to be acquired to use them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: add CPP access coreJakub Kicinski
Command Push Pull is the name of NFP's network on a chip. PCIe PF can access the interconnect through a number of mappings controlled via Base Access Registers. BARs allow the PF to issue pretty much any command or address any memory on the chip. Add appropriate logic and a handful of helper for simple operations like reading scalars from memories. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10nfp: rename the driver and add new main fileJakub Kicinski
Support for the PF driver is about to be added and will share much of the code. When the VF driver was added we planned to maintain the PF driver as a separate module but have decided that for our simple use case just maintaining a single module is more reasonable. Rename the driver to just "nfp" and update the Kconfig. While at it remove latent references to NFP3200. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10bitfield.h: add FIELD_FIT() helperJakub Kicinski
Add a helper for checking at runtime that a value will fit inside a specified field/mask. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-25bpf: add initial bpf tracepointsDaniel Borkmann
This work adds a number of tracepoints to paths that are either considered slow-path or exception-like states, where monitoring or inspecting them would be desirable. For bpf(2) syscall, tracepoints have been placed for main commands when they succeed. In XDP case, tracepoint is for exceptions, that is, f.e. on abnormal BPF program exit such as unknown or XDP_ABORTED return code, or when error occurs during XDP_TX action and the packet could not be forwarded. Both have been split into separate event headers, and can be further extended. Worst case, if they unexpectedly should get into our way in future, they can also removed [1]. Of course, these tracepoints (like any other) can be analyzed by eBPF itself, etc. Example output: # ./perf record -a -e bpf:* sleep 10 # ./perf script sock_example 6197 [005] 283.980322: bpf:bpf_map_create: map type=ARRAY ufd=4 key=4 val=8 max=256 flags=0 sock_example 6197 [005] 283.980721: bpf:bpf_prog_load: prog=a5ea8fa30ea6849c type=SOCKET_FILTER ufd=5 sock_example 6197 [005] 283.988423: bpf:bpf_prog_get_type: prog=a5ea8fa30ea6849c type=SOCKET_FILTER sock_example 6197 [005] 283.988443: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[06 00 00 00] val=[00 00 00 00 00 00 00 00] [...] sock_example 6197 [005] 288.990868: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[01 00 00 00] val=[14 00 00 00 00 00 00 00] swapper 0 [005] 289.338243: bpf:bpf_prog_put_rcu: prog=a5ea8fa30ea6849c type=SOCKET_FILTER [1] https://lwn.net/Articles/705270/ Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08bpf: xdp: Allow head adjustment in XDP progMartin KaFai Lau
This patch allows XDP prog to extend/remove the packet data at the head (like adding or removing header). It is done by adding a new XDP helper bpf_xdp_adjust_head(). It also renames bpf_helper_changes_skb_data() to bpf_helper_changes_pkt_data() to better reflect that XDP prog does not work on skb. This patch adds one "xdp_adjust_head" bit to bpf_prog for the XDP-capable driver to check if the XDP prog requires bpf_xdp_adjust_head() support. The driver can then decide to error out during XDP_SETUP_PROG. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-02bpf, xdp: drop rcu_read_lock from bpf_prog_run_xdp and move to callerDaniel Borkmann
After 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"), the rcu_read_lock() in bpf_prog_run_xdp() is superfluous, since callers need to hold rcu_read_lock() already to make sure BPF program doesn't get released in the background. Thus, drop it from bpf_prog_run_xdp(), as it can otherwise be misleading. Still keeping the bpf_prog_run_xdp() is useful as it allows for grepping in XDP supported drivers and to keep the typecheck on the context intact. For mlx4, this means we don't have a double rcu_read_lock() anymore. nfp can just make use of bpf_prog_run_xdp(), too. For qede, just move rcu_read_lock() out of the helper. When the driver gets atomic replace support, this will move to call-sites eventually. mlx5 needs actual fixing as it has the same issue as described already in 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"), that is, we're under RCU bh at this time, BPF programs are released via call_rcu(), and call_rcu() != call_rcu_bh(), so we need to properly mark read side as programs can get xchg()'ed in mlx5e_xdp_set() without queue reset. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-27bpf: drop unnecessary context cast from BPF_PROG_RUNDaniel Borkmann
Since long already bpf_func is not only about struct sk_buff * as input anymore. Make it generic as void *, so that callers don't need to cast for it each time they call BPF_PROG_RUN(). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16netronome: don't access real_num_rx_queues directlyArnd Bergmann
The netdev->real_num_rx_queues setting is only available if CONFIG_SYSFS is enabled, so we now get a build failure when that is turned off: netronome/nfp/nfp_net_common.c: In function 'nfp_net_ring_swap_enable': netronome/nfp/nfp_net_common.c:2489:18: error: 'struct net_device' has no member named 'real_num_rx_queues'; did you mean 'real_num_tx_queues'? As far as I can tell, the check here is only used as an optimization that we can skip in order to fix the compilation. If sysfs is disabled, the following netif_set_real_num_rx_queues() has no effect. Fixes: 164d1e9e5d52 ("nfp: add support for ethtool .set_channels") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: add support for offload of XDP programsJakub Kicinski
Most infrastructure can be reused, provide separate handling of context offsets and exit codes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: remove unnecessary parameters from nfp_net_bpf_offload()Jakub Kicinski
nfp_net_bpf_offload() takes all .setup_tc() parameters but it doesn't use them at the moment. Remove unnecessary ones to make it possible for XDP to reuse this function. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: add XDP support in the driverJakub Kicinski
Add XDP support. Separate stack's and XDP's TX rings logically. Add functions for handling XDP_TX and cleanup of XDP's TX rings. For XDP allocate all RX buffers as separate pages and map them with DMA_BIDIRECTIONAL. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: reorganize nfp_net_rx() to get packet offsets earlyJakub Kicinski
Calculate packet offsets early in nfp_net_rx() so that we will be able to use them in upcoming XDP handler. While at it move relevant variables into the loop scope. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: add support for ethtool .set_channelsJakub Kicinski
Allow changing the number of rings via ethtool .set_channels API. Runtime reconfig needs to be extended to handle number of rings. We need to be able to activate interrupt vectors before rings are assigned to them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: move RSS indirection table init into a separate functionJakub Kicinski
We will need to rerun the initialization of the RSS indirection table after the number of rings is changed. Move the code to a separate function. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: add helper to reassign rings to IRQ vectorsJakub Kicinski
Instead of fixing ring -> vector relations up in ring swap functions put the reassignment into a helper function which will reinit all links. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: loosen relation between rings and IRQs vectorsJakub Kicinski
Upcoming XDP support will break the assumption that one can iterate over IRQ vectors to get to all the rings easily. Use nn->.x_ring arrays directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: reuse ring helpers on .ndo_open() pathJakub Kicinski
Ring allocation helpers encapsulate all ring allocation and initialization steps nicely. Reuse them on .ndo_open() path. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: rename ring allocation helpersJakub Kicinski
"Shadow" in ring helpers used to mean that the helper will allocate rings without touching existing configuration, this was used for reconfiguration while the device was running. We will soon use the same helpers for .ndo_open() path, so replace "shadow" with "ring_set". No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: centralize runtime reconfiguration logicJakub Kicinski
All functions which need to reallocate ring resources at runtime look very similar. Centralize that logic into a separate function. Encapsulate configuration parameters in a structure. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-04nfp: add support for ethtool .get_channelsJakub Kicinski
Report number of rings via ethtool .get_channels API. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: bring back support for different ring countsJakub Kicinski
We used to always allocate the same number of TX and RX rings so the support for having r_vectors without one of the rings was dropped. That makes us, however, unnecessarily limited to 8 TX rings (8 is the Linux RSS default) most of the time. Also we are about to add channel count configuration via ethtool, so bring that support back. TX rings can now default to num_online_cpus() and RX rings to netif_get_num_default_rss_queues(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: replace num_irqs with max_r_vecsJakub Kicinski
num_irqs is not used anywhere, replace it with max_r_vecs which holds number of allocated RX/TX vectors and is going to be useful soon. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: remove nfp_net_irqs_wanted()Jakub Kicinski
nfp_net_irqs_wanted() doesn't really encapsulate much logic, remove it and inline the calculations. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: use unsigned int for vector/ring countsJakub Kicinski
Use unsigned int consistently for vector/ring counts. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: create separate define for max number of vectorsJakub Kicinski
We are currently using define for max TX rings to allocate IRQ vectors. It's OK since the max number of rings for TX and RX are currently the same, but lets make the code nicer by taking max of the two. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: use AND instead of modulo to get ring indexesJakub Kicinski
We already force ring sizes to be power of 2 so replace modulo operations with AND (size - 1) in index calculations. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: add separate buffer allocation function for napiJakub Kicinski
Introduce a separate buffer allocation function to be called from NAPI. We can make assumptions about the context and buffer size. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: use alloc_frag() and build_skb()Jakub Kicinski
Speed up RX processing by moving to the alloc_frag()/build_skb() paradigm. Since we're no longer mapping the entire buffer for DMA add helpers which take care of calculating offsets and lengths. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: add buffer drop/recycle helper for RXJakub Kicinski
nfp_net_rx() is quite long already and about to get longer. Move buffer drop/recycle to a helper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-01nfp: centralize the buffer size calculationJakub Kicinski
Add a helper function to calculate the buffer size at run time. Buffer lengths will now depend on the FW prepend configuration instead of assuming the most space consuming configuration and defaulting to 2k buffers at initialization time. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-06 23:55:20 +0000