summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c
AgeCommit message (Collapse)Author
2017-06-29net/mlx4_en: Do not allocate redundant TX queues when TC is disabledInbar Karmy
Currently the number of TX queues that are allocated doesn't depend on the number of TCs, the module always loads with max num of UP per channel. In order to prevent the allocation of unnecessary memory, the module will load with minimum number of UPs per channel, and the user will be able to control the number of TX queues per channel by changing the number of TC to 8 using the tc command. The variable num_up will hold the information about the current number of UPs. Due to the change, needed to remove the lines that set the value of UP to be different than zero in the func "mlx4_en_select_queue", since now the num of TX queues that are allocated is only one per channel in default. In order not to force the UP to be zero in case of only one TC, added a condition before forcing it in the func "mlx4_en_fill_qp_context". Tested: After the module is loaded with minimum number of UP per channel, to increase num of TCs to 8, use: tc qdisc add dev ens8 root mqprio num_tc 8 In order to decrease the number of TCs to minimum number of UP per channel, use: tc qdisc del dev ens8 root Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-29net/mlx4_en: Add dynamic variable to hold the number of user priorities (UP)Inbar Karmy
Until this patch, the number of UPs was hard coded for eight. Replace this with a variable in struct "mlx4_en_port_profile". Currently, the variable will hold the maximum number of UP, as before. The patch creates an infrastructure to add an option for dynamic change of the actual number of TCs. Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Cc: Tarick Bedeir <tarick@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-23net/mlx4: Change ENOTSUPP to EOPNOTSUPPOr Gerlitz
As ENOTSUPP is specific to NFS, change the return error value to EOPNOTSUPP in various places in the mlx4 driver. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Suggested-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fixes for DCBXTariq Toukan
This patch adds a capability check before enabling DCBX. In addition, it re-organizes the relevant data structures, and fixes a typo in a define. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state()Kamal Heib
mlx4_en_dcbnl_set_state() returns u8, the return value from mlx4_en_setup_tc() could be negative in case of failure, so fix that. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all()Kamal Heib
mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23net/mlx4_en: Add DCB PFC support through CEE netlink commandsRana Shahout
This patch adds support for reading and updating priority flow control (PFC) attributes in the driver via netlink. Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net/mlx4: New file for QoS related firmware commandsIdo Shamay
Create two new files fw_qos.h and fw_qos.c in mlx4_core module. It gathers all relevant QoS firmware related commands etc, thus improving encapsulation of the mlx4_core module. For now it contains the QoS existing commands: mlx4_SET_PORT_SCHEDULER and mlx4_SET_PORT_PRIO2TC. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31net/mlx4_en: Add Flow control statistics display via ethtoolMatan Barak
Flow control per priority and Global pause counters are now visible via ethtool. The counters shows statistics regarding pauses in the device. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06net/mlx4_en: Add QCN parameters and statistics handlingShani Michaeli
Implement the IEEE DCB handlers for set/get QCN parameters and statistics reading per TC. Signed-off-by: Shani Michaeli <shanim@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-02net/mlx4_en: Fix UP limit in ieee_ets->prio_tcAmir Vadai
User priority limit has to be less than MLX4_EN_NUM_UP. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21net/mlx4_en: Disable global flow control when PFC enabledEugenia Emantayev
Fix a bug when FC and PFC are enabled/disabled at the same time. According to ConnectX-3 Programmer Manual these two features are mutial exclusive. So make sure when enabling PFC to turn off global FC and vise versa. Otherwise it hurts the performance. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21net/mlx4_en: Coding style cleanup in mlx4_en_dcbnl_ieee_setpfc()Amir Vadai
Fix some coding style issues in this function. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25net/mlx4_en: Remove an unnecessary testDotan Barak
Since this variable is now part of a structure and not allocated dynamically, this test is irrelevant now. Signed-off-by: Dotan Barak <dotanb@dev.mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net/mlx4_en: Advertize DCB_CAP_DCBX_HOST in getdcbxOr Gerlitz
When our getdcbx entry is called, DCB_CAP_DCBX_HOST should be advertized too. Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-07net/mlx4_en: Enable DCB ETS ops only when supported by the firmwareOr Gerlitz
Enable the DCB ETS ops only when supported by the firmware. For older firmware/cards which don't support ETS, advertize only PFC DCB ops. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28net/mlx4_en: Can set maxrate only for TC0Amir Vadai
Had a typo in memcpy. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-16drivers/net: fix unresolved 64bit math in mellanox/mlx4/en_dcb_nl.cPaul Gortmaker
Commit 109d2446052a484c58f07f71f9457bf7b71017f8 "net/mlx4_en: Set max rate-limit for a TC" introduced 64 bit math operations into mlx4_en_dcbnl_ieee_setmaxrate() causing the following final link failure on an x86_32 allmodconfig ERROR: "__udivdi3" [drivers/net/ethernet/mellanox/mlx4/mlx4_en.ko] undefined! Convert it to use div_u64() instead. Cc: Amir Vadai <amirv@mellanox.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05net/mlx4_en: Set max rate-limit for a TCAmir Vadai
This patch is using the DCB netlink to set rate limit per ETS TC Values are accepted in Kbps and rounded up to the nearest multiply of 100Mbps. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05net/mlx4_en: DCB QoS supportAmir Vadai
Set TSA, promised BW and PFC using IEEE 802.1qaz netlink commands. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 16:40:45 +0000