summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/jme.c
AgeCommit message (Collapse)Author
2014-05-14jme: Fix unmap loop counting error:Neil Horman
In my recent fix (76a691d0a: fix dma unmap warning), Ben Hutchings noted that my loop count was incorrect. Where j started at startidx, it should have started at zero, and gone on for count entries, not to endidx. Additionally, a DMA resource exhaustion should drop the frame and (for now), return NETDEV_TX_OK, not NETEV_TX_BUSY. This patch fixes both of those issues: Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Ben Hutchings <ben@decadent.org.uk> CC: "David S. Miller" <davem@davemloft.net> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07jme: Fix DMA unmap warningNeil Horman
The jme driver forgot to check the return status from pci_map_page in its tx path, causing a dma api warning on unmap. Easy fix, just do the check and augment the tx path to tell the stack that the driver is busy so we re-queue the frame. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29jme: remove open-coded skb_cow_head.françois romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24jme: Call dev_kfree_skb_any instead of dev_kfree_skb.Eric W. Biederman
Replace dev_kfree_skb with dev_kfree_skb_any in jme_expand_header that can be called in hard irq and other contexts, on the failure path where the skb is dropped. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-10-21net: jme: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27jme: lower NAPI weightMichal Schmidt
Since commit 82dc3c63 ("net: introduce NAPI_POLL_WEIGHT") netif_napi_add() produces an error message if a NAPI poll weight greater than 64 is requested. jme requests a quarter of the rx ring size as the NAPI weight. jme's rx ring size is 1 << 9 = 512. Use the standard NAPI weight. v2: proper reference to the related commit Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31net, jme: remove redundant D0 power state setYijing Wang
pci_enable_device() will set device power state to D0, so it's no need to do it again in jme_init_one(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03jme: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-14drivers/net: fix tasklet misuse issueXiaotian Feng
In commit 175c0dff, drivers uses tasklet_kill to avoid put disabled tasklet on the tasklet vec. But some of the drivers uses tasklet_init & tasklet_disable in the driver init code, then tasklet_enable when it is opened. This makes tasklet_enable on a killed tasklet and make ksoftirqd crazy then. Normally, drivers should use tasklet_init/tasklet_kill on device open/remove, and use tasklet_disable/tasklet_enable on device suspend/resume. Reported-by: Peter Wu <lekensteyn@gmail.com> Tested-by: Peter Wu <lekensteyn@gmail.com> Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03drivers/net: use tasklet_kill in device remove/close processXiaotian Feng
Some driver uses tasklet_disable in device remove/close process, tasklet_disable will inc tasklet->count and return. If the tasklet is not handled yet because some softirq pressure, the tasklet will placed on the tasklet_vec, never have a chance to excute. This might lead to ksoftirqd heavy loaded, wakeup with pending_softirq, but tasklet is disabled. tasklet_kill should be used in this case. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-11net/ethernet/jme: disable ASPMKevin Baradon
Based on patch from Matthew Garrett <mjg@redhat.com> (https://lkml.org/lkml/2011/11/11/168). http://driveragent.com/archive/30421/7-0-14 indicates that ASPM is disabled on the 250 and 260. Duplicate for sanity. Fixes random RX engine hangs I experienced with JMC250 on Clevo W270HU. Signed-off-by: Kevin Baradon <kevin.baradon@gmail.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: Matthew Garrett <mjg@redhat.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18jme: netpoll supportPeter Wu
This patch adds the netpoll function to support netconsole. Tested and works fine on my "JMC250 PCI Express Gigabit Ethernet Controller" (PCI ID 0250). Signed-off-by: Peter Wu <lekensteyn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-22jme: Fix FIFO flush issueGuo-Fu Tseng
Set the RX FIFO flush watermark lower. According to Federico and JMicron's reply, setting it to 16QW would be stable on most platforms. Otherwise, user might experience packet drop issue. CC: stable@kernel.org Reported-by: Federico Quagliata <federico@quagliata.org> Fixed-by: Federico Quagliata <federico@quagliata.org> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-11-27jme: PHY configuration for compatible issueAries Lee
To perform PHY calibration and set a different EA value by chip ID, Whenever the NIC chip power on, ie booting or resuming, we need to force HW to calibrate PHY parameter again, and also set a proper EA value which gather from experiment. Those procedures help to reduce compatible issues(NIC is unable to link up in some special case) in giga speed. Signed-off-by: AriesLee <AriesLee@jmicron.com> Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: drivers: use bool type instead of double negationMichał Mirosław
Save some punctuation by using bool type's property equivalent to doubled negation operator. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14Sweep additional floors of strcpy in .get_drvinfo routinesRick Jones
Perform another round of floor sweeping, converting the .get_drvinfo routines of additional drivers from strcpy to strlcpy along with some conversion of sprintf to snprintf. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15jme: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Guo-Fu Tseng <cooldavid@cooldavid.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12jme: Move the JME driverJeff Kirsher
Move the JME driver into drivers/net/ethernet/ and make the necessary Kconfig and Makefile changes. CC: Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 05:08:35 +0000