summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igb
AgeCommit message (Collapse)Author
2013-02-15igb: Refix sparse warning in igb_get_i2c_clientCarolyn Wyborny
This patch correctly resolves the sparse warnings found with this function. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Fix for improper allocation flag in igb_get_i2c_clientCarolyn Wyborny
This patch fixes the allocation function in igb_get_i2c_client to use GFP_ATOMIC instead of GFP_KERNEL because we have a spinlock. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Fix for improper exit in igb_get_i2c_clientCarolyn Wyborny
This patch fixes an issue where we check for irq's disabled then exit after explicitly disabling them with spin_lock_irqsave. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <arron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-15igb: Support using build_skb in the case that jumbo frames are disabledAlexander Duyck
This change makes it so that we can enable the use of build_skb for cases where jumbo frames are disabled. The advantage to this is that we do not have to perform a memcpy to populate the header and as a result we see a significant performance improvement. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-28igb: Don't give VFs random MAC addressesMitch A Williams
If the user has not assigned a MAC address to a VM, then don't give it a random one. Instead, just give it zeros and let it figure out what to do with them. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-19igb: Copyright string update to year 2013Akeem G. Abodunrin
This patch updates Copyright year to 2013 v2: Changed Copyright year on Makefile Signed-off-by: Akeem G. Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-19igb: Replace rmb in Tx cleanup with read_barrier_dependsAlexander Duyck
The rmb in the Tx cleanup path is a much stronger barrier than we really need. All that is really needed is a read_barrier_depends since the location of the EOP descriptor is dependent on the eop_desc value. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Use in-kernel PTP_EV_PORT #defineMatthew Vick
Rather than use an extra #define for something that already exists, use the kernel #define for the PTP port. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Free any held skb that should have been timestamped on removeMatthew Vick
To prevent a race condition where an skb has been saved to return the Tx timestamp later and the driver is removed, add a check to determine if we have an skb stored and, if so, free it. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Add mechanism for detecting latched hardware Rx timestampMatthew Vick
Add a check against possible Rx timestamp freezing in the hardware via watchdog mechanism. This situation can occur when an Rx timestamp has been latched, but the packet has been dropped because the Rx ring is full. Whenever a packet comes in that should be timestamped, the Rx timestamp gets latched into the hardware registers and we will store the jiffy value in the rx_ring. The watchdog will keep track of his own jiffy timer whenever there is no valid timestamp in the registers. If the watchdog detects a valid timestamp in the registers, meaning that no Rx packet has consumed it yet, it will check which time is most recent: the last time in the watchdog or any time in the rx_rings. If the most recent "event" was more than 5 seconds ago, it will flush the Rx timestamp and print a warning message to the syslog. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Add timeout for PTP Tx work itemMatthew Vick
When transmitting a packet that must return a Tx timestamp, a work item gets scheduled to poll for the Tx timestamp being completed in hardware. Add a timeout on this work item of 15 seconds from when the driver gets the skb, after which it will stop polling. Report via stats and system log if this occurs. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Add support for SW timestampingMatthew Vick
Enable SW timestamping for situations where the user may prefer it over HW timestamping or there may not be HW timestamping. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Jacob Keller <Jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Enable hwmon data output for thermal sensors via I2C.Carolyn Wyborny
Some of our adapters have internal sensors that report thermal data. This patch enables reporting of that data via sysfs. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Add support functions to access thermal data.Carolyn Wyborny
Some of our devices have internal sensors for reporting thermal data. This patch creates the interface to the sensors for exporting via sysfs. Subsequent patch will actually export the data. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Add i2c interface to igb.Carolyn Wyborny
Some of our adapters have sensors on them accessible via i2c and a private interface. This patch implements the kernel interface for i2c to those sensors. Subsequent patches will provide functions to export that data. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-18igb: Enable SR-IOV configuration via PCI sysfs interfaceGreg Rose
Implement callback in the driver for the new PCI bus driver interface that allows the user to enable/disable SR-IOV virtual functions in a device via the sysfs interface. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-08remove init of dev->perm_addr in driversJiri Pirko
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-06igb: Update igb version to 4.1.2Carolyn Wyborny
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-06igb: release already assigned MSI-X interrupts if setup failsStefan Assmann
During MSI-X setup the system might run out of vectors. If this happens the already assigned vectors for this NIC should be freed before trying the disable MSI-X. Failing to do so results in the following oops. kernel BUG at drivers/pci/msi.c:341! [...] Call Trace: [<ffffffff8128f39d>] pci_disable_msix+0x3d/0x60 [<ffffffffa037d1ce>] igb_reset_interrupt_capability+0x27/0x5c [igb] [<ffffffffa037d229>] igb_clear_interrupt_scheme+0x26/0x2d [igb] [<ffffffffa0384268>] igb_request_irq+0x73/0x297 [igb] [<ffffffffa0384554>] __igb_open+0xc8/0x223 [igb] [<ffffffffa0384815>] igb_open+0x13/0x15 [igb] [<ffffffff8144592f>] __dev_open+0xbf/0x120 [<ffffffff81443e51>] __dev_change_flags+0xa1/0x180 [<ffffffff81445828>] dev_change_flags+0x28/0x70 [<ffffffff814af537>] devinet_ioctl+0x5b7/0x620 [<ffffffff814b01c8>] inet_ioctl+0x88/0xa0 [<ffffffff8142e8a0>] sock_do_ioctl+0x30/0x70 [<ffffffff8142ecf2>] sock_ioctl+0x72/0x270 [<ffffffff8118062c>] do_vfs_ioctl+0x8c/0x340 [<ffffffff81180981>] sys_ioctl+0xa1/0xb0 [<ffffffff815161a9>] system_call_fastpath+0x16/0x1b Code: 48 89 df e8 1f 40 ed ff 4d 39 e6 49 8b 45 10 75 b6 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 5f c9 c3 48 8b 7b 20 e8 3e 91 db ff eb ae <0f> 0b eb fe 0f 1f 84 00 00 00 00 00 55 48 89 e5 0f 1f 44 00 00 RIP [<ffffffff8128e144>] free_msi_irqs+0x124/0x130 RSP <ffff880037503bd8> Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-06igb: remove duplicate code for fallback interrupt initializationStefan Assmann
Given a small change to igb_init_interrupt_scheme() the function fits igb_request_irq() for MSI/legacy interrupts initialization as well, instead of duplicating most of its code there. Also adding a missing igb_configure() to igb_request_irq() for MSI fallback to work properly. Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-03net/intel: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Cc: Tushar Dave <tushar.n.dave@intel.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-01igb: Fix SerDes autoneg flow control.Carolyn Wyborny
This patch enables flow control to be set in SerDes autoneg mode. This is done the way it is done for copper, but relies on a different set of register/bit checks since this is all done within the MAC registers. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-01igb: Unset sigdetect for SERDES loopback on 82580 and i350Carolyn Wyborny
This patch unsets the sigdetect bit for SERDES loopback tests on 82580 and i350 parts. The loopback test can fail on these parts without this setting. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-01igb: Workaround for global device reset problem on 82580.Carolyn Wyborny
Due to a hw errata, the global device reset doesn't always work on 82580 devices. This patch works around the problem not trying to do a global device reset on these devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-01igb: Refactoring of i210 file.Carolyn Wyborny
This patch refactors the functions in e1000_i210.c in order to remove need for prototypes. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-01igb: Acquire, release semaphore for writing each EEPROM pageAkeem G. Abodunrin
This patch allows software acquires and releases NVM resource for writing each EEPROM page, instead of holding semaphore for the whole data block which is too long and could trigger write fails on unpredictable addresses. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-01igb: Updates to read nvm function for i211 deviceCarolyn Wyborny
The i211 has an integrated secure space to store configuration information that is usually stored in an EEPROM or flash type device. This patch updates the read functions to return values or appropriate error codes to prevent unnecessary init failures on some configuration schemes. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-28igb: Use a 32-bit mask when calculating the flow control watermarksMatthew Vick
For some devices, the result of the flow control high watermark gets truncated when programming it into the registers because of the mask used. Switch the mask to 32-bit to prevent this from happening. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-22igb: Do not parse past IP header on fragments beyond the firstAlexander Duyck
This change makes it so that only the first fragment in a series of fragments will have the L4 header pulled. Previously we were always pulling the L4 header as well and in the case of UDP this can harm performance since only the first fragment will have the header, the rest just contain data which should be left in the paged portion of the packet. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-22igb: No longer rely on APME to determine WoL settingsMatthew Vick
Historically, we've been using the APME bit to determine whether a device supports wake on a given port or not. However, this bit specifies the default wake setting, rather than the wake support. Change the behavior so that we use a flag to keep the capabilities separate from the enablement while meeting customer requirements. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-22igb: Update PTP Rx filtersMatthew Vick
Update the filters to be more consistent with what the driver wants to do. For example, for devices that timestamp all packets, report that the filter is set for timestamping all packets. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-13igb: Ethtool support to enable and disable EEEAkeem G. Abodunrin
This patch allows users to enable and disable EEE using Ethtool. It also allows users to get EEE settings, as supported by the device. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13igb: Improve performance and reduce size of igb_tx_mapAlexander Duyck
This change is meant to both improve the performance and reduce the size of igb_tx_map. To do this I have expanded the work done in the main loop by pushing first into tx_buffer. This allows us to pull in the dma_mapping_error check, the tx_buffer value assignment, and the initial DMA value assignment to the Tx descriptor. The net result is that the function reduces in size by a little over a 100 bytes and is about 1% or 2% faster. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13igb: Update igb Tx flags to improve code efficiencyAlexander Duyck
This change is meant to improve the efficiency of the Tx flags in igb by aligning them with the values that will later be written into either the cmd_type or olinfo. By doing this we are able to reduce most of these functions to either just a simple shift followed by an or in the case of cmd_type, or an and followed by an or in the case of olinfo. In order to avoid type conversion errors I also adjusted the locations where we were switching between CPU and little endian. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13igb: Make TSO check for CHECKSUM_PARTIAL to avoid skb_is_gso checkAlexander Duyck
This change is meant to reduce the overhead for workloads that are not using either TSO or checksum offloads. Most of the time the compiler should jump ahead after failing this check to the VLAN check since in the igb_tx_csum call we start with that check as well. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13igb: Support for modifying UDP RSS flow hashingAkeem G. Abodunrin
This patch provides ability to enable or disable UDP RSS hashing. It gives users option of generating RSS hash based on the UDP source and destination ports numbers. Currently, UDP flow hash is always disabled in igb-driver. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13igb: Clear Go Link Disconnect for 82580 and later devicesCarolyn Wyborny
Customers are requesting that the hw prevents PHY from establishing link until the driver loads. This patch clears the Go Link Disconnect bit which provides the requested behavior on parts 82580 and later. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-02Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== This series contains updates to igb, ixgbe and e1000. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01ptp: Enable clock drivers along with associated net/PHY driversBen Hutchings
Where a PTP clock driver is associated with a net or PHY driver, it should be enabled automatically whenever that driver is enabled. Therefore: - Make PTP clock drivers select rather than depending on PTP_1588_CLOCK - Remove separate boolean options for PTP clock drivers that are built as part of net driver modules. (This also fixes cases where the PTP subsystem is wrongly forced to be built-in.) - Set 'default y' for PTP clock drivers that depend on specific net drivers but are built separately Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01igb: Fix EEPROM writes via ethtool on i210Carolyn Wyborny
This patch fixes a problem where the driver would crash when trying to write a word to the EEPROM on i210 devices. Reported-by: Ekman Tsang <Ekman.Tsang@riverbed.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-01igb: Add function to read i211's invm versionCarolyn Wyborny
The i211's one-time programmable (invm) version field is different than the other fields contained in it. This patch adds a function to get the invm version of it and store it for output from ethtool. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-11-01igb: Remove workaround for EEE configuration on i210/I211Carolyn Wyborny
This patch removes a workaround that was needed on pre-release hardware. Released hardware should not have this setting, but any devices that do will get a warning message instead. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-29igb: Fix sparse warning in igb_ptp_rx_pktstampAlexander Duyck
This change fixes a sparse warning triggered by us casting the timestamp in the packet as a u64 instead of as a __le64. This change corrects that in order to resolve the sparse warning. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-29igb: Update firmware version info for ethtool output.Carolyn Wyborny
There are multiple places in our device nvm where the version is stored. This update fixes some output errors with some types of images and refactors the way the version data is gathered and stored for ethtool output. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-29igb: Enable auto-crossover during forced operation on 82580 and above.Matthew Vick
Newer devices supported by igb can support auto-crossover detection in forced operation modes. Enable this in the driver, rather than clobbering this functionality in forced operation. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23igb: Update versionCarolyn Wyborny
This patch updates the igb driver version to 4.0.17. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-23igb: Update get cable length function for i210/i211Carolyn Wyborny
There was a problem in the initial implementation of the get cable length function for i210 and it did not work properly. This patch fixes that problem for i210/i211 devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-10-19igb: Split igb_update_dca into separate Tx and Rx functionsAlexander Duyck
This change makes it so that igb_update_dca is broken into two halves, one for Rx and one for Tx. The advantage to this is primarily readability. In addition I am enabling relaxed ordering for reads from hardware since this is supported on all of the igb parts. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-03 17:17:04 +0000