summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
AgeCommit message (Collapse)Author
2014-11-18i40e: Prevent link flow control settings when PFC is enabledNeerav Parikh
When PFC is enabled we should not proceed with setting the link flow control parameters. Also, always report the link flow Tx/Rx settings as off when PFC is enabled. Change-ID: Ib09ec58afdf0b2e587ac9d8851a5c80ad58206c4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-By: Jack Morgan <jack.morgan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11i40e: clean up throttle rate codeJesse Brandeburg
The interrupt throttle rate minimum is actually 2us, so fix that define and while we are there, remove some unused defines. Change some strings in the function to be a bit less wrappy, and express the correct limits. Change-ID: I96829bbc77935e0b57c6f0fc1439fb4152b2960a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-03i40e: avoid disable of interrupt when changing ITRJesse Brandeburg
The call to irq_dynamic_disable was turning off the interrupt completely when trying to set ITR to 0 (for lowest moderation). Just remove the call as setting the values to 0 later in this function will suffice. Change-ID: I47caf1ecbe65653cf63ec833db93094cd83fd84d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Patrick Lu <patrick.lu@intel.com> Tested-By: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-10-23i40e: Add 10GBaseT supportMitch Williams
Add driver support for 10GBaseT device. Change-ID: I4be6ed847ac0bddd220b9878a95c523b32038174 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Tell OS link is going down when calling set_phy_configCatherine Sullivan
Since we don't seem to be getting an LSE telling us link is going down during set_phy_config (but we do get an LSE telling us we are coming back up), fake one for the OS and tell them link is going down. Also do an atomic restart no matter what because there are times the user may want to end with link up even if they started with link down (like if they accidentally set it to a speed that can't link and are trying to fix it). Change-ID: I0a642af9c1d0feb67bce741aba1a9c33bd349ed6 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Allow user to change link settings if link is downCatherine Sullivan
Allow the user to change auto-negotiation and speed settings if link is down. Change-ID: I372967c627682b5e1835f623a7cbf41b21b51043 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-04i40e: Add dual speed module supportCatherine Sullivan
Now that fw has implemented dual speed module support, we can add ours. Also, add the phy type for 1G LR/SR and set its media type to fiber. Lastly, instead of a WARN_ON if the phy type is not recognized just print a warning. Change-ID: I2e5227d4a8c2907b0ed423038e5dbce774e466b0 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e: Add a FD flush counter to ethtoolAnjali Singhai Jain
This helps know how many times the interface had to flush and replay FD filter table, which gives an indication on how often we are getting FD table full situation. Also check on certain pf states before proceeding to add or delete filters since we can't add or delete filters if we are in those states. Change-ID: I97f5bbbea7146833ea61af0e08ea794fccba1780 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-26i40e: ATR policy change to flush the table to clean stale ATR rulesAnjali Singhai Jain
Instead of disabling ATR when we get a programming error, we now will wait it out to see if some room gets created by ATR rule deletion. If we still have too many errors and ATR filter count did not change much, its time to flush and replay. We no more auto-disable ATR when we have errors in programming. The disabling of ATR when we get programming error was buggy and was still adding new rules and causing continuous errors. With this policy change we flush instead when we see too many errors. ATR is still disabled if we add a SB rule for TCP/IPv4 flow type, more logic is added to re-enable it once all SB TCP/IPv4 rules are gone. Change-ID: I77edcbeab9500c72a7e0bd7b5c5b113ced133a9c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-06list: fix order of arguments for hlist_add_after(_rcu)Ken Helias
All other add functions for lists have the new item as first argument and the position where it is added as second argument. This was changed for no good reason in this function and makes using it unnecessary confusing. The name was changed to hlist_add_behind() to cause unconverted code to generate a compile error instead of using the wrong parameter order. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [intel driver bits] Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-02i40e: Adds FCoE related code to i40e core driverVasu Dev
Adds FCoE specific code to existing i40e core driver to:- 1. have separate FCoE VSI with additional FCoE queues pairs. 2. have FCoE related hash defines. 3. have additional FCoE related stats code. 4. export and then re-use existing functions required by FCoE build. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Jack Morgan<jack.morgan@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-24i40e: Give link more time after setting flow controlCatherine Sullivan
Give link a little more time to come back up after setting flow control before resetting. In the new NVMs it is taking longer for link to come back. This causes the driver to attempt to reset the link, which then errors because the firmware was already in the middle of a reset. Also, initialize err to 0. Change-ID: I1cc987a944e389d8909c262da5796f50722b4d6b Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jmyoungx@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: Add nvmupdate supportShannon Nelson
This implements a state machine intended to support the userland tool for updating the device eeprom. The state machine implements one-shot reads, writes, multi-step write sessions, and checksum requests. If we're in the middle of a multi-step write session, no one should fire off other writes, however, one shot reads are valid. The userland tool is expected to keep track of its session status, arrange the placement and ordering of the writes, and deal with the checksum requirement. This patch also adds nvmupdate support to ethtool callbacks. The get_eeprom() and set_eeprom() services in ethtool are used here to facilitate the userland NVMUpdate tool. The 'magic' value in the get and set commands is used to pass additional control information for managing the read and write steps. The read operation works both as normally expected in the standard ethtool method, as well as with the extra NVM controls. The write operation works only for the expanded NVM functions - the normal ethtool method is not allowed because of the NVM semaphore management needed for multipart writes, as well as the checksum requirement. Change-ID: I1d84a170153a9f437906744e2e350fd68fe7563d Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e: Implement set_settings for ethtoolCatherine Sullivan
Implement set_settings for ethtool in i40e. Change-ID: Ie3c3fe18e8ff86c3f25b842844b3d9aabc9bba57 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e: Add set_pauseparam to ethtoolCatherine Sullivan
Add i40e implementation of setpauseparam to ethtool. Change-ID: Ie7766b2091ec8f934737573c9ffd426081966718 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e: move nway resetJesse Brandeburg
Just move nway reset up, will be used in the next patch. Change-ID: Ice3b631fa2044debc5c4541b42872a48163f8452 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-02i40e: Finish implementation of ethtool get settingsJesse Brandeburg
Finish the i40e implementation of get_settings for ethtool. Change-ID: Iec81835aa9380723ae9288bcb79b30a6a1ecd498 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-24i40e: Add ablitity to enable/disable link from set_link_restart_anCatherine Sullivan
The ability is already there in the fw and this will make it easy to toggle link without calling set_phy_config when no other link settings need to change. Change-ID: I185567ae81776382ac145247e4eb1ee95f22382c Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-24i40e: Fix ethtool coalesce settingsCarolyn Wyborny
This patch fixes the i40e_set_coalesce function to allow 0 as a disable value. Also, added message to user about invalid value and provides valid range. Change-ID: I6c9ff11a9861f2045bd543745a3d132999ffbbd8 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e: Fix a bug in ethtool for FD drop packet filter actionAnjali Singhai Jain
A drop action comes down as a ring_cookie value, so allow it as a special value that can be used to configure destination control. Also fix the output to filter read command accordingly. Change-ID: I9956723cee42f3194885403317dd21ed4a151144 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e/i40evf: Add Flow director stats to PF statsAnjali Singhai Jain
Add members to stat struct to keep track of Flow director ATR and SideBand filter packet matches. Change-ID: Ibbb31a53c7adcc2bb96991dd80565442a2f2513c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-11i40e: Change the notion of src and dst for FD_SB in ethtoolAnjali Singhai Jain
In XL710 devices we program FD filter's fields from Tx perspective of the flow. However the user interface exposed in ethtool should be compliant with the previous generation of drivers where a filter src and dst field are from the RX perspective. This patch changes the ethtool interface in this regard to match the other drivers. Change-ID: Iec6ccddd87357c4fb53ccf33aa0fae699faf70cf Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-09i40e/i40evf: add PPRS bit to error bits and fix bug in Rx checksumJesse Brandeburg
The driver was not marking packets with bad checksums correctly, especially IPv6 packets with a bad checksum. To do this correctly we need a define that may be set by hardware in rare cases. Change-ID: I1a997b72b491ded27a78ac3bce1197b2d2611130 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add xcast stats for portShannon Nelson
Add the missing unicast, multicast, and broadcast stats for the port. Change-ID: Ifc366d7b7745f70eaac9d00eeb0694eb9ec076a9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add vsi x-cast statsShannon Nelson
Add VSI HW stats for unicast, multicast, and broadcast for Rx and Tx. Stop printing the netdev multicast value because it doesn't include Tx and would be confusing. Change-ID: I08278b6657e7c838fd29a4a1f305f78fe1b150be Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-06i40e: add VEB stats to ethtoolShannon Nelson
Print the VEB statistics in the ethtool stats output. Change-ID: Ic93d4c3922345c43e4cfd7f7e7a906844dd2f49f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e: add missing VSI statisticsShannon Nelson
Add a couple more statistics that the hardware offers but aren't part of the standard netdev stats. Change-ID: I201db2898f2c284aee3d9631470bc5edd349e9a5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-06-05i40e/i40evf: remove rx_errors and rx_missedShannon Nelson
The rx_errors (GLV_REPC) and rx_missed (GLV_RMPC) were removed from the chip design. Change-ID: Ifdeb69c90feac64ec95c36d3d32c75e3a06de3b7 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Report cmd->data in ETHTOOL_GRXCLSRLCNT instead of ETHTOOL_GRXCLSRULEAnjali Singhai Jain
Based on review feedback from upstream cmd->data is not defined in ETHTOOL_GRXCLSRULE but needs to be reported in ETHTOOL_GRXCLSRLCNT. Also use a helper function to calculate the total filter count. Change-ID: Iaacbf729527b73290c4fdad837b379b44fd7dd20 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e/i40evf: Remove reserved PCTYPE definesKevin Scott
Patch to remove PCTYPE definitions which are now reserved. Change-ID: I66c1c16a45a16f4894b2983101ab2a48ce03f1f4 Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-29i40e: Tx/Rx rings declarationAkeem G Abodunrin
This patch changes the declaration of Tx/Rx rings inside several loops. It eliminates declaring the same rings every time for the duration of the loop, instead declaring them once before the loop. Change-ID: I59dea54276f18c47dca522f520c18f65fe42a15d Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove Tx work for ptpJesse Brandeburg
The previous removal of the PTP Tx work functionality was incomplete as noted by Jake Keller. This removal allows us to rely on the Tx timesync interrupt. CC: Jacob Keller <jacob.e.keller@intel.com> Change-ID: Id4faaf275a3688053ebbf07bef08072f9fd11aa9 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e: remove hardcode of stats struct size in ethtoolShannon Nelson
Base the queue stats length on the queue stats struct rather than assuming it is 2 fields. This is in prep for adding data fields which are configuration dependent. Change-ID: I937f471f389d2e0f8cec733960c5d9a06b14f3ec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-21i40e/i40evf: control auto ITR through ethtoolMitch Williams
For all of our supported kernels, ethtool allows us to directly control adaptive ITR instead of just faking it with an ITR value. Support this capability so that user knows explicitly when ITR is being controlled dynamically. Suggested by Ben Hutchings. CC: Ben Hutchings <ben@decadent.org.uk> Change-ID: Iae6b79c5db767a63d22ecd9a9c24acaff02a096e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-22i40e: Tweak for-loop in i40e_ethtool.cCatherine Sullivan
Tweak a for-loop to make it easier to add conditional stats in the future. Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-04-21i40e: Fix an issue with displaying IPv4 FD filtersAnjali Singhai Jain
The flow spec coming in for IPv4 filters is IP_USER_FLOW, which needed some more info to be communicated up above in order for it to be displayed correctly. Change-ID: Ia968238e0d7c4c4df12908ba81f0c4501280f3ec Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-31i40e: Remove casts of pointer to same typeJoe Perches
Casting a pointer to a pointer of the same type is pointless, so remove these unnecessary casts. Done via coccinelle script: $ cat typecast_2.cocci @@ type T; T *foo; @@ - (T *)foo + foo Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Add functionality for FD SB to drop packetsAnjali Singhai Jain
With this change we can drop a flow if we wanted to. Change-ID: I222b1ae960e61a31965bafe3159a95099e70c7d2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-28i40e: Cleanup in FDIR SB ethtool codeAnjali Singhai Jain
Function add_del_fdir was used and implemented only for add. So change the name and drop a parameter. Change-ID: Icf2c6c3bbd4fd00cf8d9613a3f6d8c08e0f8e288 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-21i40e/i40evf: Add EEE LPI statsAnjali Singhai Jain
Add 4 new stats to keep track of EEE LPI (Low Power Idle) state. Change-ID: Id6316619bb0559789770288b694a54d17f8fac5c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14i40e: Add code to handle FD table full conditionAnjali Singhai Jain
Add code to enforce the following policy: - If the HW reports filter programming error, we check if it's due to a full table. - If so, we go ahead and turn off new rule addition for ATR and then SB in that order. - We monitor the programmed filter count, if enough room is created due to filter deletion/reset, we then re-enable SB and ATR new rule addition. Change-ID: I69d24b29e5c45bc4fa861258e11c2fa7b8868748 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-14i40e: Fix a bug in the update logic for FDIR SB filter.Anjali Singhai Jain
The update filter logic was causing a kernel panic in the original code. We need to compare the input set to decide whether or not to delete a filter since we do not have a hash stored. This new design helps fix the issue. Change-ID: I2462b108e58ca4833312804cda730b4660cc18c9 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: count timeout eventsJesse Brandeburg
The ethtool -S statistics should have a counter for tx timeouts in order to better help inform the masses. Change-ID: Ice4b20ed4a151509f366719ab105be49c9e7b2b4 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-06i40e: Flow Director sideband accountingJoseph Gasparakis
This patch completes implementation of the ethtool ntuple rule management interface. It adds the get, update and delete interface reset. Change-ID: Ida7f481d9ee4e405ed91340b858eabb18a52fdb5 Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-01-17i40e: refactor flow directorAnjali Singhai Jain
The i40e hardware was generating some inconsistent results when using current programming methods. This refactor fixes the inconsistencies that were preventing clean unloads of the driver, and moves the queues for handling flow director errors into their own hardware VSI. This patch also implements a corrected version of the basic ethtool add ntuple rule, which will disable the driver's automatic flow programming. A future patch adds remove/replay/list support for ntuple. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17i40e: rename definesJesse Brandeburg
The FLAG_FDIR_* defines can be renamed to be more descriptive. This patch is in preparation for the following where the fdir code is refactored. Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17i40e: whitespace fixesJesse Brandeburg
Fix more whitespace issues, including making some locals declared in a nicer order. Also update Copyright string printed when the driver loads. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10i40e: enable PTPJacob Keller
New feature: Enable PTP support in the i40e driver. Change-ID: I6a8e799f582705191f9583afb1b9231a8db96cc8 Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 06:56:13 +0000