summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/faraday
AgeCommit message (Collapse)Author
2018-09-26net: faraday: fix return type of ndo_start_xmit functionYueHaibing
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper for set_pauseparam for Asym PauseAndrew Lunn
ethtool can be used to enable/disable pause. Add a helper to configure the PHY when asym pause is supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper for MACs which support asym pauseAndrew Lunn
Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-20net/ncsi: Silence debug messagesJoel Stanley
In normal operation we see this series of messages as the host drives the network device: ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config ftgmac100 1e660000.ethernet eth0: NCSI interface down ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI interface up ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config ftgmac100 1e660000.ethernet eth0: NCSI interface down ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI interface up This makes all of these messages netdev_dbg. They are still useful to debug eg. misbehaving network device firmware, but we do not need them filling up the kernel logs in normal operation. Acked-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22net: faraday add nds32 support.Greentime Hu
This patch is used to support nds32 architecture to use these faraday mac IP. Signed-off-by: Greentime Hu <greentime@andestech.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2017-10-27net: faraday: ftmac100: Use BUG_ON instead of if condition followed by BUG.Gustavo A. R. Silva
Notice that in this particular case unlikely() is already being called inside BUG_ON macro. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: ftgmac100: Request clock and set speedJoel Stanley
According to the ASPEED datasheet, gigabit speeds require a clock of 100MHz or higher. Other speeds require 25MHz or higher. This patch configures a 100MHz clock if the system has a direct-attached PHY, or 25MHz if the system is running NC-SI which is limited to 100MHz. There appear to be no other upstream users of the FTGMAC100 driver it is hard to know the clocking requirements of other platforms. Therefore a conservative approach was taken with enabling clocks. If the platform is not ASPEED, both requesting the clock and configuring the speed is skipped. Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28ftgmac100: Support NCSI VLAN filtering when availableSamuel Mendoza-Jonas
Register the ndo_vlan_rx_{add,kill}_vid callbacks and set the NETIF_F_HW_VLAN_CTAG_FILTER if NCSI is available. This allows the VLAN core to notify the NCSI driver when changes occur so that the remote NCSI channel can be properly configured to filter on the set VLAN tags. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net: ftgmac100: Fix oops in probe on failure to find associated PHYAndrew Jeffery
netif_napi_del() should be paired with netif_napi_add(), however no such call takes place in ftgmac100_probe(). This triggers a NULL pointer dereference if e.g. no PHY is found by the MDIO probe: [ 2.770000] libphy: Fixed MDIO Bus: probed [ 2.770000] ftgmac100 1e660000.ethernet: Generated random MAC address 66:58:c0:5a:50:b8 [ 2.790000] libphy: ftgmac100_mdio: probed [ 2.790000] ftgmac100 1e660000.ethernet (unnamed net_device) (uninitialized): eth%d: no PHY found [ 2.790000] ftgmac100 1e660000.ethernet: MII Probe failed! [ 2.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 2.810000] pgd = 80004000 [ 2.810000] [00000004] *pgd=00000000 [ 2.810000] Internal error: Oops: 805 [#1] ARM [ 2.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.17-1a4df30c39cf5ee0e3d2528c409787ccbb4a672a #1 [ 2.810000] Hardware name: ASpeed SoC [ 2.810000] task: 9e421b60 task.stack: 9e4a0000 [ 2.810000] PC is at netif_napi_del+0x74/0xa4 [ 2.810000] LR is at ftgmac100_probe+0x290/0x674 [ 2.810000] pc : [<80331004>] lr : [<80292b30>] psr: 60000013 [ 2.810000] sp : 9e4a1d70 ip : 9e4a1d88 fp : 9e4a1d84 [ 2.810000] r10: 9e565000 r9 : ffffffed r8 : 00000007 [ 2.810000] r7 : 9e565480 r6 : 9ec072c0 r5 : 00000000 r4 : 9e5654d8 [ 2.810000] r3 : 9e565530 r2 : 00000000 r1 : 00000000 r0 : 9e5654d8 [ 2.810000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 2.810000] Control: 00c5387d Table: 80004008 DAC: 00000055 [ 2.810000] Process swapper (pid: 1, stack limit = 0x9e4a0188) [ 2.810000] Stack: (0x9e4a1d70 to 0x9e4a2000) [ 2.810000] 1d60: 9e565000 9e549e10 9e4a1dcc 9e4a1d88 [ 2.810000] 1d80: 80292b30 80330f9c ffffffff 9e4a1d98 80146058 9ec072c0 00009e10 00000000 [ 2.810000] 1da0: 9e549e18 9e549e10 ffffffed 805f81f4 fffffdfb 00000000 00000000 00000000 [ 2.810000] 1dc0: 9e4a1dec 9e4a1dd0 80243df8 802928ac 9e549e10 8062cbd8 8062cbe0 805f81f4 [ 2.810000] 1de0: 9e4a1e24 9e4a1df0 80242178 80243da4 803001d0 802ffa60 9e4a1e24 9e549e10 [ 2.810000] 1e00: 9e549e44 805f81f4 00000000 00000000 805b8840 8058a6b0 9e4a1e44 9e4a1e28 [ 2.810000] 1e20: 80242434 80241f04 00000000 805f81f4 80242344 00000000 9e4a1e6c 9e4a1e48 [ 2.810000] 1e40: 80240148 80242350 9e425bac 9e4fdc90 9e790e94 805f81f4 9e790e60 805f5640 [ 2.810000] 1e60: 9e4a1e7c 9e4a1e70 802425dc 802400d8 9e4a1ea4 9e4a1e80 80240ba8 802425c0 [ 2.810000] 1e80: 8050b6ac 9e4a1e90 805f81f4 ffffe000 805b8838 80616720 9e4a1ebc 9e4a1ea8 [ 2.810000] 1ea0: 80243068 80240a68 805ab24c ffffe000 9e4a1ecc 9e4a1ec0 80244a38 80242fec [ 2.810000] 1ec0: 9e4a1edc 9e4a1ed0 805ab264 80244a04 9e4a1f4c 9e4a1ee0 8058ae70 805ab258 [ 2.810000] 1ee0: 80032c68 801e3fd8 8052f800 8041af2c 9e4a1f4c 9e4a1f00 80032f90 8058a6bc [ 2.810000] 1f00: 9e4a1f2c 9e4a1f10 00000006 00000006 00000000 8052f220 805112f0 00000000 [ 2.810000] 1f20: 9e4a1f4c 00000006 80616720 805cf400 80616720 805b8838 80616720 00000057 [ 2.810000] 1f40: 9e4a1f94 9e4a1f50 8058b040 8058add0 00000006 00000006 00000000 8058a6b0 [ 2.810000] 1f60: 3940bf3d 00000007 f115c2e8 00000000 803fd158 00000000 00000000 00000000 [ 2.810000] 1f80: 00000000 00000000 9e4a1fac 9e4a1f98 803fd170 8058af38 00000000 803fd158 [ 2.810000] 1fa0: 00000000 9e4a1fb0 8000a5e8 803fd164 00000000 00000000 00000000 00000000 [ 2.810000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.810000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d11dcae8 af8ddec5 [ 2.810000] [<80331004>] (netif_napi_del) from [<80292b30>] (ftgmac100_probe+0x290/0x674) [ 2.810000] [<80292b30>] (ftgmac100_probe) from [<80243df8>] (platform_drv_probe+0x60/0xc0) [ 2.810000] [<80243df8>] (platform_drv_probe) from [<80242178>] (driver_probe_device+0x280/0x44c) [ 2.810000] [<80242178>] (driver_probe_device) from [<80242434>] (__driver_attach+0xf0/0x104) [ 2.810000] [<80242434>] (__driver_attach) from [<80240148>] (bus_for_each_dev+0x7c/0xb0) [ 2.810000] [<80240148>] (bus_for_each_dev) from [<802425dc>] (driver_attach+0x28/0x30) [ 2.810000] [<802425dc>] (driver_attach) from [<80240ba8>] (bus_add_driver+0x14c/0x268) [ 2.810000] [<80240ba8>] (bus_add_driver) from [<80243068>] (driver_register+0x88/0x104) [ 2.810000] [<80243068>] (driver_register) from [<80244a38>] (__platform_driver_register+0x40/0x54) [ 2.810000] [<80244a38>] (__platform_driver_register) from [<805ab264>] (ftgmac100_driver_init+0x18/0x20) [ 2.810000] [<805ab264>] (ftgmac100_driver_init) from [<8058ae70>] (do_one_initcall+0xac/0x168) [ 2.810000] [<8058ae70>] (do_one_initcall) from [<8058b040>] (kernel_init_freeable+0x114/0x1cc) [ 2.810000] [<8058b040>] (kernel_init_freeable) from [<803fd170>] (kernel_init+0x18/0x104) [ 2.810000] [<803fd170>] (kernel_init) from [<8000a5e8>] (ret_from_fork+0x14/0x2c) [ 2.810000] Code: e594205c e5941058 e2843058 e3a05000 (e5812004) [ 3.210000] ---[ end trace f32811052fd3860c ]--- Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25ftgmac100: return error in ftgmac100_alloc_rx_bufJoel Stanley
The error paths set err, but it's not returned. I wondered if we should fix all of the callers to check the returned value, but Ben explains why the code is this way: > Most call sites ignore it on purpose. There's nothing we can do if > we fail to get a buffer at interrupt time, so we point the buffer to > the scratch page so the HW doesn't DMA into lalaland and lose the > packet. > > The one call site that tests and can fail is the one used when brining > the interface up. If we fail to allocate at that point, we fail the > ifup. But as you noticed, I do have a bug not returning the error. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24ftgmac100: Make the MDIO bus a child of the ethernet deviceBenjamin Herrenschmidt
Populate mii_bus->parent with our own platform device before registering, which makes it easier to locate the MDIO bus in sysfs when trying to diagnose problems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24ftgmac100: Increase reset timeoutBenjamin Herrenschmidt
We had reports of 50us not being sufficient to reset the MAC, thus hitting the "Hardware reset failed" error bringing the interface up on some AST2400 based machines. This bumps the timeout to 200us. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-05net/{mii, smsc}: Make mii_ethtool_get_link_ksettings and smc_netdev_get_ecmd ↵yuval.shaia@oracle.com
return void Make return value void since functions never returns meaningfull value. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: ethernet: faraday: To support device tree usage.Greentime Hu
To support device tree usage for ftmac100. Signed-off-by: Greentime Hu <green.hu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Fix potential ordering issue in NAPI pollBenjamin Herrenschmidt
We need to ensure the loads from the descriptor are done after the MMIO store clearing the interrupts has completed, otherwise we might still miss work. A read back from the MMIO register will "push" the posted store and ioread32 has a barrier on weakly aordered architectures that will order subsequent accesses. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Display the discovered PHY device infoBenjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Allow configuration of phy interface via device-treeBenjamin Herrenschmidt
This uses the standard phy-mode property Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Add netpoll supportBenjamin Herrenschmidt
Just call the interrupt handler with interrupts locally disabled Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Add vlan HW offloadBenjamin Herrenschmidt
The chip supports HW vlan tag insertion and extraction. Add support for it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Add ndo_set_rx_mode() and support for multicast & promiscBenjamin Herrenschmidt
This adds the ndo_set_rx_mode() callback to configure the multicast filters, promisc and allmulti options. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Add pause frames configuration and supportBenjamin Herrenschmidt
Hopefully my understanding of how the hardware works is correct, as the documentation isn't completely clear. So far I have seen no obvious issue. Pause seem to also work with NC-SI. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18ftgmac100: Add ethtool n-way reset callBenjamin Herrenschmidt
A non-wired up implementation accidentally made its way in a previous patch (Make ring sizes configurable via ethtool). This removes it and wires up the generic phy_ethtool_nway_reset instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Set default ring sizes to 128 entriesBenjamin Herrenschmidt
I haven't seen any improvement above that size on the machines I've tested with. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Make ring sizes configurable via ethtoolBenjamin Herrenschmidt
We set an arbitrary max at 1024 since we pre-allocate the actual descriptor arrays and skb arrays to the full size to keep the code a bit simpler and avoid allocation failures in the reset task. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Add more register inits in ftgmac100_init_hw()Benjamin Herrenschmidt
Clear stale interrupts on entry, configure FIFO sizes, set FIFO thresholds, configure interrupt mitigation. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Open code remaining register writesBenjamin Herrenschmidt
The helpers just take space but don't provide much value. Simple one line comments are more explanatory. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Rename ftgmac100_setup_mac to ftgmac100_initial_macBenjamin Herrenschmidt
To remove more confusion. This function is about obtaining the initial MAC address at driver probe time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Rename ftgmac100_set_mac to ftgmac100_write_mac_addrBenjamin Herrenschmidt
To avoid confusion with the ndo callback and generally be clearer about the purpose of that function Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Set netdev->hw_featuresBenjamin Herrenschmidt
So features can be turned on/off via ethtool Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Disable HW checksum generation on AST2400, enable on othersBenjamin Herrenschmidt
We found out that HW checksum generation only works from AST2500 onward. This disables it on AST2400 and removes the "no-hw-checksum" properties in the device-trees. The problem we had wasn't related to NC-SI. Also rework the logic testing for that property so it can be used to disable HW checksum generation and checking regardless of whether NC-SI is used or not in case other variants out there need this. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Use device "compatible" property, not machine.Benjamin Herrenschmidt
We test for aspeed chips to handle a couple of special cases, but we do that by checking the machine type which isn't right. Instead check the actual device compatible property. This also updates the dtsi files for the aspeed SoC to match. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-12ftgmac100: Upgrade to NETIF_F_HW_CSUMBenjamin Herrenschmidt
The documentation describes NETIF_F_IP_CSUM as deprecated so let's switch to NETIF_F_HW_CSUM and use the helper to handle unhandled protocols. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Remove tx descriptor accessorsBenjamin Herrenschmidt
Directly access the fields when needed. The accessors add clutter not clarity and in some cases cause unnecessary read-modify-write type access on the slow (uncached) descriptor memory. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Add support for fragmented txBenjamin Herrenschmidt
Add NETIF_F_SG and create multiple TX ring entries for skb fragments. On reclaim, the skb is only freed on the segment marked as "last". Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Don't clear tx desc fields unnecessarilyBenjamin Herrenschmidt
Those are non-cachable stores, let's avoid those we don't need. Remove the helper, it's not particularly helpful and since it uses "priv" I can't move it to the header file. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Split tx packet freeing from ftgmac100_tx_complete_packet()Benjamin Herrenschmidt
This moves the packet freeing to a separate function which is also used by ftgmac100_free_buffers() and will be used more in the error path of fragmented sends. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Move the barrier out of ftgmac100_txdes_set_dma_own()Benjamin Herrenschmidt
We'll use variants of this accessor without barriers when building series of descriptors for fragmented sends Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Cleanup tx queue handlingBenjamin Herrenschmidt
We have a private lock which isn't terribly useful, and we maintain a "tx_pending" counter for information that's already available via a trivial arithmetic operation. Then we unconditionaly wake the queue even when not stopped. Finally our code in tx isn't really safe vs. a concurrent reclaim. The aspeed chips aren't SMP today but I prefer the code being right and future proof. So rip that out and replace it with more "standard" queue handling, currently with a threshold of 1 queue element, which will be increased when we implement fragmented sends. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Store tx skbs in a separate arrayBenjamin Herrenschmidt
Rather than in the descriptor. The descriptor is mapped non-cachable and rather slow to access. Since to do that we need to keep track of the tx "pointer" we also have no use of all the accesors to manipulate it, just open code it, it's as clear and will help when adding fragmented sends. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Pad small frames properlyBenjamin Herrenschmidt
Rather than just transmitting garbage past the end of the small packet. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Factor tx packet dropping pathBenjamin Herrenschmidt
Use a simple goto to a drop path at the tail of the function, it will be used in a few more cases soon Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Merge ftgmac100_xmit() into ftgmac100_hard_start_xmit()Benjamin Herrenschmidt
This will make subsequent rework of the tx path simpler Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Move ftgmac100_hard_start_xmit() aroundBenjamin Herrenschmidt
Move it below ftgmac100_xmit() and the rest of the tx path No code change. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-10ftgmac100: Add a tx timeout handlerBenjamin Herrenschmidt
We have a reset task to reset our chip, use it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06ftgmac100: Work around HW bug in runt frame detectionBenjamin Herrenschmidt
The HW incorrectly calculates the frame size without the vlan tag and compares that against 64. It will thus flag 64-bytes frames with a vlan tag as 60-bytes frames "runt" packets which we'll then drop. Thus we end up dropping ARP packets on vlan's ... It does that whether vlan tag stripping is enabled or not. This works around it by ignoring the "runt" error bit of the frame has been vlan tagged and is at least 60 bytes. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06ftgmac100: Remove rx descriptor accessorsBenjamin Herrenschmidt
Directly access the fields when needed. The accessors add clutter not clarity and in some cases cause unnecessary read-modify-write type access on the slow (uncached) descriptor memory. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06ftgmac100: Add missing barrier in ftgmac100_rx_packet()Benjamin Herrenschmidt
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06ftgmac100: Directly receive into sk_buffsBenjamin Herrenschmidt
The current driver receive path allocates pages and stashes them into SKB fragments. This is not particularly useful as we don't support jumbo frames (which wouldn't be great with the small FIFOs on all the known implementations) anyway. It also makes us flush the caches and allocate more memory for RX than necessary. So set our RX buf to our max packet size instead (which we bump to 1536 bytes to account for packets with vlan tags etc...) like most other ethernet drivers. Then allocate skbs when populating the receive ring and DMA directly into them. This simplifies the RX path further. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 07:18:55 +0000