summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/emulex/benet
AgeCommit message (Collapse)Author
2021-01-07net: remove ndo_udp_tunnel_* callbacksJakub Kicinski
All UDP tunnel port management is now routed via udp_tunnel_nic infra directly. Remove the old callbacks. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-09net: emulex: benet: simplify the return expression of be_if_create()Zheng Yongjun
Simplify the return expression. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-14be2net: convert to new udp_tunnel_nic infraJakub Kicinski
Convert be2net to new udp_tunnel_nic infra. NIC only takes one VxLAN port. Remove the port tracking using a list. The warning in be_work_del_vxlan_port() looked suspicious - like the driver expected ports to be removed in order of addition. be2net unregisters ports when going down and re-registers them (for skyhawk) when coming up, but it never checks if the device is up in the add_port / del_port callbacks. Make it use UDP_TUNNEL_NIC_INFO_OPEN_ONLY. Sadly this driver calls its own open/close functions directly so the udp_tunnel_nic_reset_ntf() workaround is needed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-01benet: use generic power managementVaibhav Gupta
With legacy PM, drivers themselves were responsible for managing the device's power states and takes care of register states. After upgrading to the generic structure, PCI core will take care of required tasks and drivers should do only device-specific operations. Thus, there is no need to call the PCI helper functions like pci_enable/disable_device(), pci_save/restore_sate() and pci_set_power_state(). Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-12net: be2net: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-03net/emulex: Delete driver versionLeon Romanovsky
Remove driver version in favor of general linux kernel version. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Shannon Nelson <snelson@pensando.io> Reviewed-by: Martin Habets <mhabets@solarflare.com> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com Co-developed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David Miller <davem@davemloft.net> # for net
2019-11-30net: emulex: benet: indent a Kconfig depends continuation lineRandy Dunlap
Indent a Kconfig continuation line to improve readability. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26drivers: net: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-07be2net: make two arrays static const, makes object smallerColin Ian King
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 281 bytes. Before: text data bss dec hex filename 87553 5672 0 93225 16c29 benet/be_cmds.o After: text data bss dec hex filename 87112 5832 0 92944 16b10 benet/be_cmds.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-18be2net: eliminate enable field from be_aic_objIvan Vecera
Adaptive coalescing is managed per adapter not per event queue so it does not needed to store 'enable' flag for each event queue. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06be2net: disable bh with spin_lock in be_process_mccDenis Kirjanov
be_process_mcc() is invoked in 3 different places and always with BHs disabled except the be_poll function but since it's invoked from softirq with BHs disabled it won't hurt. v1->v2: added explanation to the patch v2->v3: add a missing call from be_cmds.c Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-21be2net: Synchronize be_update_queues with dev_watchdogBenjamin Poirier
As pointed out by Firo Yang, a netdev tx timeout may trigger just before an ethtool set_channels operation is started. be_tx_timeout(), which dumps some queue structures, is not written to run concurrently with be_update_queues(), which frees/allocates those queues structures. Add some synchronization between the two. Message-id: <CH2PR18MB31898E033896F9760D36BFF288C90@CH2PR18MB3189.namprd18.prod.outlook.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-16be2net: Signal that the device cannot transmit during reconfigurationBenjamin Poirier
While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time. Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open(). Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22be2net: fix link failure after ethtool offline testPetr Oros
Certain cards in conjunction with certain switches need a little more time for link setup that results in ethtool link test failure after offline test. Patch adds a loop that waits for a link setup finish. Changes in v2: - added fixes header Fixes: 4276e47e2d1c ("be2net: Add link test to list of ethtool self tests.") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Lots of bug fixes here: 1) Out of bounds access in __bpf_skc_lookup, from Lorenz Bauer. 2) Fix rate reporting in cfg80211_calculate_bitrate_he(), from John Crispin. 3) Use after free in psock backlog workqueue, from John Fastabend. 4) Fix source port matching in fdb peer flow rule of mlx5, from Raed Salem. 5) Use atomic_inc_not_zero() in fl6_sock_lookup(), from Eric Dumazet. 6) Network header needs to be set for packet redirect in nfp, from John Hurley. 7) Fix udp zerocopy refcnt, from Willem de Bruijn. 8) Don't assume linear buffers in vxlan and geneve error handlers, from Stefano Brivio. 9) Fix TOS matching in mlxsw, from Jiri Pirko. 10) More SCTP cookie memory leak fixes, from Neil Horman. 11) Fix VLAN filtering in rtl8366, from Linus Walluij. 12) Various TCP SACK payload size and fragmentation memory limit fixes from Eric Dumazet. 13) Use after free in pneigh_get_next(), also from Eric Dumazet. 14) LAPB control block leak fix from Jeremy Sowden" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (145 commits) lapb: fixed leak of control-blocks. tipc: purge deferredq list for each grp member in tipc_group_delete ax25: fix inconsistent lock state in ax25_destroy_timer neigh: fix use-after-free read in pneigh_get_next tcp: fix compile error if !CONFIG_SYSCTL hv_sock: Suppress bogus "may be used uninitialized" warnings be2net: Fix number of Rx queues used for flow hashing net: handle 802.1P vlan 0 packets properly tcp: enforce tcp_min_snd_mss in tcp_mtu_probing() tcp: add tcp_min_snd_mss sysctl tcp: tcp_fragment() should apply sane memory limits tcp: limit payload size of sacked skbs Revert "net: phylink: set the autoneg state in phylink_phy_change" bpf: fix nested bpf tracepoints with per-cpu data bpf: Fix out of bounds memory access in bpf_sk_storage vsock/virtio: set SOCK_DONE on peer shutdown net: dsa: rtl8366: Fix up VLAN filtering net: phylink: set the autoneg state in phylink_phy_change net: add high_order_alloc_disable sysctl/static key tcp: add tcp_tx_skb_cache sysctl ...
2019-06-16be2net: Fix number of Rx queues used for flow hashingIvan Vecera
Number of Rx queues used for flow hashing returned by the driver is incorrect and this bug prevents user to use the last Rx queue in indirection table. Let's say we have a NIC with 6 combined queues: [root@sm-03 ~]# ethtool -l enp4s0f0 Channel parameters for enp4s0f0: Pre-set maximums: RX: 5 TX: 5 Other: 0 Combined: 6 Current hardware settings: RX: 0 TX: 0 Other: 0 Combined: 6 Default indirection table maps all (6) queues equally but the driver reports only 5 rings available. [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 5 RX ring(s): 0: 0 1 2 3 4 5 0 1 8: 2 3 4 5 0 1 2 3 16: 4 5 0 1 2 3 4 5 24: 0 1 2 3 4 5 0 1 ... Now change indirection table somehow: [root@sm-03 ~]# ethtool -X enp4s0f0 weight 1 1 [root@sm-03 ~]# ethtool -x enp4s0f0 RX flow hash indirection table for enp4s0f0 with 6 RX ring(s): 0: 0 0 0 0 0 0 0 0 ... 64: 1 1 1 1 1 1 1 1 ... Now it is not possible to change mapping back to equal (default) state: [root@sm-03 ~]# ethtool -X enp4s0f0 equal 6 Cannot set RX flow hash configuration: Invalid argument Fixes: 594ad54a2c3b ("be2net: Add support for setting and getting rx flow hash options") Reported-by: Tianhao <tizhao@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 338Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 14 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.856338015@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01net: move skb->xmit_more hint to softnet dataFlorian Westphal
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28benet: remove broken and unused macroLubomir Rintel
is_broadcast_packet() expands to compare_ether_addr() which doesn't exist since commit 7367d0b573d1 ("drivers/net: Convert uses of compare_ether_addr to ether_addr_equal"). It turns out it's actually not used. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-12net: ndo_bridge_setlink: Add extackPetr Machata
Drivers may not be able to implement a VLAN addition or reconfiguration. In those cases it's desirable to explain to the user that it was rejected (and why). To that end, add extack argument to ndo_bridge_setlink. Adapt all users to that change. Following patches will use the new argument in the bridge driver. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-21benet: use skb_vlan_tag_get_prio()Michał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08benet: use __vlan_hwaccel helpersMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-23Revert "be2net: remove desc field from be_eq_obj"Ivan Vecera
The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704af8f4 ("be2net: remove desc field from be_eq_obj") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05be2net: don't flip hw_features when VXLANs are added/deletedDavide Caratti
the be2net implementation of .ndo_tunnel_{add,del}() changes the value of NETIF_F_GSO_UDP_TUNNEL bit in 'features' and 'hw_features', but it forgets to call netdev_features_change(). Moreover, ethtool setting for that bit can potentially be reverted after a tunnel is added or removed. GSO already does software segmentation when 'hw_enc_features' is 0, even if VXLAN offload is turned on. In addition, commit 096de2f83ebc ("benet: stricter vxlan offloading check in be_features_check") avoids hardware segmentation of non-VXLAN tunneled packets, or VXLAN packets having wrong destination port. So, it's safe to avoid flipping the above feature on addition/deletion of VXLAN tunnels. Fixes: 630f4b70567f ("be2net: Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-05be2net: Fix memory leak in be_cmd_get_profile_config()Petr Oros
DMA allocated memory is lost in be_cmd_get_profile_config() when we call it with non-NULL port_res parameter. Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09be2net: Use Kconfig flag to support for enabling/disabling adaptersPetr Oros
Add flags to enable/disable supported chips in be2net. With disable support are removed coresponding PCI IDs and also codepaths with [BE2|BE3|BEx|lancer|skyhawk]_chip checks. Disable chip will reduce module size by: BE2 ~2kb BE3 ~3kb Lancer ~10kb Skyhawk ~9kb When enable skyhawk only it will reduce module size by ~20kb New help style in Kconfig Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07be2net: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114787 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02be2net: fix spelling mistake "seqence" -> "sequence"Colin Ian King
Trivial fix to spelling mistake in dev_info message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01be2net: Update the driver version to 12.0.0.0Suresh Reddy
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01be2net: gather debug info and reset adapter (only for Lancer) on a tx-timeoutSuresh Reddy
This patch handles a TX-timeout as follows: 1) This patch gathers and prints the following info that can help in diagnosing the cause of a TX-timeout. a) TX queue and completion queue entries. b) SKB and TCP/UDP header details. 2) For Lancer NICs (TX-timeout recovery is not supported for BE3/Skyhawk-R NICs), it recovers from the TX timeout as follows: a) On a TX-timeout, driver sets the PHYSDEV_CONTROL_FW_RESET_MASK bit in the PHYSDEV_CONTROL register. Lancer firmware goes into an error state and indicates this back to the driver via a bit in a doorbell register. b) Driver detects this and calls be_err_recover(). DMA is disabled, all pending TX skbs are unmapped and freed (be_close()). All rings are destroyed (be_clear()). c) The driver waits for the FW to re-initialize and re-creates all rings along with other data structs (be_resume()) Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: move rss_flags field in rss_info to ensure proper alignmentIvan Vecera
The current position of .rss_flags field in struct rss_info causes that fields .rsstable and .rssqueue (both 128 bytes long) crosses cache-line boundaries. Moving it at the end properly align all fields. Before patch: struct rss_info { u64 rss_flags; /* 0 8 */ u8 rsstable[128]; /* 8 128 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ u8 rss_queue[128]; /* 136 128 */ /* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */ u8 rss_hkey[40]; /* 264 40 */ }; After patch: struct rss_info { u8 rsstable[128]; /* 0 128 */ /* --- cacheline 2 boundary (128 bytes) --- */ u8 rss_queue[128]; /* 128 128 */ /* --- cacheline 4 boundary (256 bytes) --- */ u8 rss_hkey[40]; /* 256 40 */ u64 rss_flags; /* 296 8 */ }; Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: re-order fields in be_error_recovert to avoid holeIvan Vecera
- Unionize two u8 fields where only one of them is used depending on NIC chipset. - Move recovery_supported field after that union These changes eliminate 7-bytes hole in the struct and makes it smaller by 8 bytes. Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove unused tx_jiffies field from be_tx_statsIvan Vecera
Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: move txcp field in be_tx_obj to eliminate holes in the structIvan Vecera
Before patch: struct be_tx_obj { u32 db_offset; /* 0 4 */ /* XXX 4 bytes hole, try to pack */ struct be_queue_info q; /* 8 56 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct be_queue_info cq; /* 64 56 */ struct be_tx_compl_info txcp; /* 120 4 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 2 boundary (128 bytes) --- */ struct sk_buff * sent_skb_list[2048]; /* 128 16384 */ ... }: After patch: struct be_tx_obj { u32 db_offset; /* 0 4 */ struct be_tx_compl_info txcp; /* 4 4 */ struct be_queue_info q; /* 8 56 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct be_queue_info cq; /* 64 56 */ struct sk_buff * sent_skb_list[2048]; /* 120 16384 */ ... }; Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: reorder fields in be_eq_obj structureIvan Vecera
Re-order fields in struct be_eq_obj to ensure that .napi field begins at start of cache-line. Also the .adapter field is moved to the first cache-line next to .q field and 3 fields (idx,msi_idx,spurious_intr) and the 4-bytes hole to 3rd cache-line. Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove desc field from be_eq_objIvan Vecera
The event queue description (be_eq_obj.desc) field is used only to format string for IRQ name and it is not really needed to hold this value. Remove it and use local variable to format string for IRQ name. Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove unused old custom busy-poll fieldsIvan Vecera
The commit fb6113e688e0 ("be2net: get rid of custom busy poll code") replaced custom busy-poll code by the generic one but left several macros and fields in struct be_eq_obj that are currently unused. Remove this stuff. Fixes: fb6113e688e0 ("be2net: get rid of custom busy poll code") Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove unused old AIC infoIvan Vecera
The commit 2632bafd74ae ("be2net: fix adaptive interrupt coalescing") introduced a separate struct be_aic_obj to hold AIC information but unfortunately left the old stuff in be_eq_obj. So remove it. Fixes: 2632bafd74ae ("be2net: fix adaptive interrupt coalescing") Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29be2net: Fix error detection logic for BE3Suresh Reddy
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0) in be_detect_error() to know whether the error is valid error or not Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3") Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 16:36:52 +0000