summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/emulex/benet
AgeCommit message (Collapse)Author
2018-10-25Merge tag 'pci-v4.20-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-23Revert "be2net: remove desc field from be_eq_obj"Ivan Vecera
The mentioned commit needs to be reverted because we cannot pass string allocated on stack to request_irq(). This function stores uses this pointer for later use (e.g. /proc/interrupts) so we need to keep this string persistently. Fixes: d6d9704af8f4 ("be2net: remove desc field from be_eq_obj") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-05be2net: don't flip hw_features when VXLANs are added/deletedDavide Caratti
the be2net implementation of .ndo_tunnel_{add,del}() changes the value of NETIF_F_GSO_UDP_TUNNEL bit in 'features' and 'hw_features', but it forgets to call netdev_features_change(). Moreover, ethtool setting for that bit can potentially be reverted after a tunnel is added or removed. GSO already does software segmentation when 'hw_enc_features' is 0, even if VXLAN offload is turned on. In addition, commit 096de2f83ebc ("benet: stricter vxlan offloading check in be_features_check") avoids hardware segmentation of non-VXLAN tunneled packets, or VXLAN packets having wrong destination port. So, it's safe to avoid flipping the above feature on addition/deletion of VXLAN tunnels. Fixes: 630f4b70567f ("be2net: Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-05be2net: Fix memory leak in be_cmd_get_profile_config()Petr Oros
DMA allocated memory is lost in be_cmd_get_profile_config() when we call it with non-NULL port_res parameter. Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09be2net: Use Kconfig flag to support for enabling/disabling adaptersPetr Oros
Add flags to enable/disable supported chips in be2net. With disable support are removed coresponding PCI IDs and also codepaths with [BE2|BE3|BEx|lancer|skyhawk]_chip checks. Disable chip will reduce module size by: BE2 ~2kb BE3 ~3kb Lancer ~10kb Skyhawk ~9kb When enable skyhawk only it will reduce module size by ~20kb New help style in Kconfig Reviewed-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: Petr Oros <poros@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07be2net: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114787 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02be2net: fix spelling mistake "seqence" -> "sequence"Colin Ian King
Trivial fix to spelling mistake in dev_info message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01be2net: Update the driver version to 12.0.0.0Suresh Reddy
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01be2net: gather debug info and reset adapter (only for Lancer) on a tx-timeoutSuresh Reddy
This patch handles a TX-timeout as follows: 1) This patch gathers and prints the following info that can help in diagnosing the cause of a TX-timeout. a) TX queue and completion queue entries. b) SKB and TCP/UDP header details. 2) For Lancer NICs (TX-timeout recovery is not supported for BE3/Skyhawk-R NICs), it recovers from the TX timeout as follows: a) On a TX-timeout, driver sets the PHYSDEV_CONTROL_FW_RESET_MASK bit in the PHYSDEV_CONTROL register. Lancer firmware goes into an error state and indicates this back to the driver via a bit in a doorbell register. b) Driver detects this and calls be_err_recover(). DMA is disabled, all pending TX skbs are unmapped and freed (be_close()). All rings are destroyed (be_clear()). c) The driver waits for the FW to re-initialize and re-creates all rings along with other data structs (be_resume()) Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: move rss_flags field in rss_info to ensure proper alignmentIvan Vecera
The current position of .rss_flags field in struct rss_info causes that fields .rsstable and .rssqueue (both 128 bytes long) crosses cache-line boundaries. Moving it at the end properly align all fields. Before patch: struct rss_info { u64 rss_flags; /* 0 8 */ u8 rsstable[128]; /* 8 128 */ /* --- cacheline 2 boundary (128 bytes) was 8 bytes ago --- */ u8 rss_queue[128]; /* 136 128 */ /* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */ u8 rss_hkey[40]; /* 264 40 */ }; After patch: struct rss_info { u8 rsstable[128]; /* 0 128 */ /* --- cacheline 2 boundary (128 bytes) --- */ u8 rss_queue[128]; /* 128 128 */ /* --- cacheline 4 boundary (256 bytes) --- */ u8 rss_hkey[40]; /* 256 40 */ u64 rss_flags; /* 296 8 */ }; Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: re-order fields in be_error_recovert to avoid holeIvan Vecera
- Unionize two u8 fields where only one of them is used depending on NIC chipset. - Move recovery_supported field after that union These changes eliminate 7-bytes hole in the struct and makes it smaller by 8 bytes. Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove unused tx_jiffies field from be_tx_statsIvan Vecera
Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: move txcp field in be_tx_obj to eliminate holes in the structIvan Vecera
Before patch: struct be_tx_obj { u32 db_offset; /* 0 4 */ /* XXX 4 bytes hole, try to pack */ struct be_queue_info q; /* 8 56 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct be_queue_info cq; /* 64 56 */ struct be_tx_compl_info txcp; /* 120 4 */ /* XXX 4 bytes hole, try to pack */ /* --- cacheline 2 boundary (128 bytes) --- */ struct sk_buff * sent_skb_list[2048]; /* 128 16384 */ ... }: After patch: struct be_tx_obj { u32 db_offset; /* 0 4 */ struct be_tx_compl_info txcp; /* 4 4 */ struct be_queue_info q; /* 8 56 */ /* --- cacheline 1 boundary (64 bytes) --- */ struct be_queue_info cq; /* 64 56 */ struct sk_buff * sent_skb_list[2048]; /* 120 16384 */ ... }; Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: reorder fields in be_eq_obj structureIvan Vecera
Re-order fields in struct be_eq_obj to ensure that .napi field begins at start of cache-line. Also the .adapter field is moved to the first cache-line next to .q field and 3 fields (idx,msi_idx,spurious_intr) and the 4-bytes hole to 3rd cache-line. Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove desc field from be_eq_objIvan Vecera
The event queue description (be_eq_obj.desc) field is used only to format string for IRQ name and it is not really needed to hold this value. Remove it and use local variable to format string for IRQ name. Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove unused old custom busy-poll fieldsIvan Vecera
The commit fb6113e688e0 ("be2net: get rid of custom busy poll code") replaced custom busy-poll code by the generic one but left several macros and fields in struct be_eq_obj that are currently unused. Remove this stuff. Fixes: fb6113e688e0 ("be2net: get rid of custom busy poll code") Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-12be2net: remove unused old AIC infoIvan Vecera
The commit 2632bafd74ae ("be2net: fix adaptive interrupt coalescing") introduced a separate struct be_aic_obj to hold AIC information but unfortunately left the old stuff in be_eq_obj. So remove it. Fixes: 2632bafd74ae ("be2net: fix adaptive interrupt coalescing") Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29be2net: Fix error detection logic for BE3Suresh Reddy
Check for 0xE00 (RECOVERABLE_ERR) along with ARMFW UE (0x0) in be_detect_error() to know whether the error is valid error or not Fixes: 673c96e5a ("be2net: Fix UE detection logic for BE3") Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28emulex/benet: Constify *be_misconfig_evt_port_state[]Hernán Gonzalez
Note: This is compile only tested as I have no access to the hw. No benefit gained except for some self-documenting. add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0) Function old new delta Total: Before=2757703, After=2757703, chg +0.00% Signed-off-by: Hernán Gonzalez <hernan@vanguardiasur.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-06be2net: Handle transmit completion errors in LancerSuresh Reddy
If the driver receives a TX CQE with status as 0x1 or 0x9 or 0xb, the completion indexes should not be used. The driver must stop consuming CQEs from this TXQ/CQ. The TXQ from this point on-wards to be in a bad state. Driver should destroy and recreate the TXQ. 0x1: LANCER_TX_COMP_LSO_ERR 0x9 LANCER_TX_COMP_SGE_ERR 0xb: LANCER_TX_COMP_PARITY_ERR Reset the adapter if driver sees this error in TX completion. Also adding sge error counter in ethtool stats. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-06be2net: Fix HW stall issue in LancerSuresh Reddy
Lancer HW cannot handle a TSO packet with a single segment. Disable TSO/GSO for such packets. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-01be2net: remove redundant initialization of 'head' and pointer txqColin Ian King
Variable head is initialized to a value that is never read and is being updated to a new value a few lines later, hence this initialization is redundant and can be safely removed as well as the now unused pointer txq. Cleans up clang warning: drivers/net/ethernet/emulex/benet/be_main.c:996:6: warning: Value stored to 'head' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-25be2net: networking block comments don't use an empty /* lineRohit Visavalia
Resolved Warning: networking block comments don't use an empty /* line, use /* Comment... Issue found by checkpatch. Signed-off-by: Rohit Visavalia <rohit.visavalia@softnautics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in 'net'. The esp{4,6}_offload.c conflicts were overlapping changes. The 'out' label is removed so we just return ERR_PTR(-EINVAL) directly. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22be2net: restore properly promisc mode after queues reconfigurationIvan Vecera
The commit 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-09be2net: use ARRAY_SIZE for array sizing calculation on array cmd_priv_mapColin Ian King
Use the ARRAY_SIZE macro on array cmd_priv_map to determine size of the array. Improvement suggested by coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-13be2net: fix TSO6/GSO issue causing TX-stall on Lancer/BExSuresh Reddy
IPv6 TSO requests with extension hdrs are a problem to the Lancer and BEx chips. Workaround is to disable TSO6 feature for such packets. Also in Lancer chips, MSS less than 256 was resulting in TX stall. Fix this by disabling GSO when MSS less than 256. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-25benet: fix set but not used warningstephen hemminger
warning: variable ‘netdev’ set but not used Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes in drivers/net/phy/marvell.c, bug fix in 'net' restricting a HW workaround alongside cleanups in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25be2net: Update the driver version to 11.4.0.0Suresh Reddy
Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25be2net: Fix UE detection logic for BE3Suresh Reddy
On certain platforms BE3 chips may indicate spurious UEs (unrecoverable error). Because of the UE detection logic was disabled in the driver for BE3 chips. Because of this, even in cases of a real UE, a failover will not occur. This patch re-enables UE detection on BE3 and if a UE is detected, reads the POST register. If the POST register, reports either a FAT_LOG_STATE or a ARMFW_UE, then it means that a valid UE occurred in the chip. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24be2net: Fix offload features for Q-in-Q packetsVlad Yasevich
At least some of the be2net cards do not seem to be capabled of performing checksum offload computions on Q-in-Q packets. In these case, the recevied checksum on the remote is invalid and TCP syn packets are dropped. This patch adds a call to check disbled acceleration features on Q-in-Q tagged traffic. CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01benet: Use time_before_eq for time comparisonKarim Eshapa
Use time_before_eq for time comparison more safe and dealing with timer wrapping to be future-proof. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18be2net: VxLAN offload should be re-enabled when only 1 UDP port is leftSriharsha Basavapatna
We disable VxLAN offload when more than 1 UDP port is added to the driver, since Skyhawk doesn't support offload with multiple ports. The existing driver design expects the user to delete all port configurations and create a configuration with a single UDP port for VxLAN offload to be re-enabled. Remove this restriction by tracking the ports added and re-enabling offload when ports get deleted and only 1 port is left. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Reviewed-by: Sathya Perla <sathya.perla@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30be2net: Fix endian issue in logical link config commandSuresh Reddy
Use cpu_to_le32() for link_config variable in set_logical_link_config command as this variable is of type u32. Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-03be2net: get rid of custom busy poll codeEric Dumazet
Compared to custom busy_poll, the generic NAPI one is better, since it allows to use GRO, and it removes a lot of code and extra locked operations in fast path. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All merge conflicts were simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01be2net: fix initial MAC settingIvan Vecera
Recent commit 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") allows privileged BE3 VFs to set its MAC address during initialization. Although the initial MAC for such VFs is already programmed by parent PF the subsequent setting performed by VF is OK, but in certain cases (after fresh boot) this command in VF can fail. The MAC should be initialized only when: 1) no MAC is programmed (always except BE3 VFs during first init) 2) programmed MAC is different from requested (e.g. MAC is set when interface is down). In this case the initial MAC programmed by PF needs to be deleted. The adapter->dev_mac contains MAC address currently programmed in HW so it should be zeroed when the MAC is deleted from HW and should not be filled when MAC is set when interface is down in be_mac_addr_set() as no programming is performed in this case. Example of failure without the fix (immediately after fresh boot): # ip link set eth0 up <- eth0 is BE3 PF be2net 0000:01:00.0 eth0: Link is Up # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create 1 VF ... be2net 0000:01:04.0: Emulex OneConnect(be3): VF port 0 # ip link set eth8 up <- eth8 is created privileged VF be2net 0000:01:04.0: opcode 59-1 failed:status 1-76 RTNETLINK answers: Input/output error # echo 0 > /sys/class/net/eth0/device/sriov_numvfs <- Delete VF iommu: Removing device 0000:01:04.0 from group 33 ... # echo 1 > /sys/class/net/eth0/device/sriov_numvfs <- Create it again iommu: Removing device 0000:01:04.0 from group 33 ... # ip link set eth8 up be2net 0000:01:04.0 eth8: Link is Up Initialization is now OK. v2 - Corrected the comment and condition check suggested by Suresh & Harsha Fixes: 34393529163a ("be2net: fix MAC addr setting on privileged BE3 VFs") Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Acked-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-16be2net: fix MAC addr setting on privileged BE3 VFsIvan Vecera
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16be2net: don't delete MAC on close on unprivileged BE3 VFsIvan Vecera
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16be2net: fix status check in be_cmd_pmac_add()Ivan Vecera
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2 be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2017-01-08net: make ndo_get_stats64 a void functionstephen hemminger
The network device operation for reading statistics is only called in one place, and it ignores the return value. Having a structure return value is potentially confusing because some future driver could incorrectly assume that the return value was used. Fix all drivers with ndo_get_stats64 to have a void function. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07be2net: fix unicast list fillingIvan Vecera
The adapter->pmac_id[0] item is used for primary MAC address but this is not true for adapter->uc_list[0] as is assumed in be_set_uc_list(). There are N UC addresses copied first from net_device to adapter->uc_list[1..N] and then N UC addresses from adapter->uc_list[0..N-1] are sent to HW. So the last UC address is never stored into HW and address 00:00:00:00;00:00 (from uc_list[0]) is used instead. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: b717241 be2net: replace polling with sleeping in the FW completion path Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06be2net: fix accesses to unicast listIvan Vecera
Commit 988d44b "be2net: Avoid redundant addition of mac address in HW" introduced be_dev_mac_add & be_uc_mac_add helpers that incorrectly access adapter->uc_list as an array of bytes instead of an array of be_eth_addr. Consequently NIC is not filled with valid data so unicast filtering is broken. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 988d44b be2net: Avoid redundant addition of mac address in HW Signed-off-by: Ivan Vecera <cera@cera.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 16:52:00 +0000