summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/davicom
AgeCommit message (Collapse)Author
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-09dm9000: Fix irq trigger type setup on non-dt platformsSylwester Nawrocki
Commit b5a099c67a1c36b "net: ethernet: davicom: fix devicetree irq resource" causes an interrupt storm after the ethernet interface is activated on S3C24XX platform (ARM non-dt), due to the interrupt trigger type not being set properly. It seems, after adding parsing of IRQ flags in commit 7085a7401ba54e92b "drivers: platform: parse IRQ flags from resources", there is no path for non-dt platforms where irq_set_type callback could be invoked when we don't pass the trigger type flags to the request_irq() call. In case of a board where the regression is seen the interrupt trigger type flags are passed through a platform device's resource and it is not currently handled properly without passing the irq trigger type flags to the request_irq() call. In case of OF an of_irq_get() call within platform_get_irq() function seems to be ensuring required irq_chip setup, but there is no equivalent code for non OF/ACPI platforms. This patch mostly restores irq trigger type setting code which has been removed in commit ("net: ethernet: davicom: fix devicetree irq resource"). Fixes: b5a099c67a1c36b913 ("net: ethernet: davicom: fix devicetree irq resource") Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-17drivers: net: Don't print unpopulated net_device nameHarvey Hunt
For ethernet devices, net_device.name will be eth%d before register_netdev() is called. Don't print the net_device name until the format string is replaced. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Marcel Ziswiler <marcel@ziswiler.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Barry Song <Baohua.Song@csr.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-21net: ethernet: davicom: fix devicetree irq resourceRobert Jarzmik
The dm9000 driver doesn't work in at least one device-tree configuration, spitting an error message on irq resource : [    1.062495] dm9000 8000000.ethernet: insufficient resources [    1.068439] dm9000 8000000.ethernet: not found (-2). [    1.073451] dm9000: probe of 8000000.ethernet failed with error -2 The reason behind is that the interrupt might be provided by a gpio controller, not probed when dm9000 is probed, and needing the probe deferral mechanism to apply. Currently, the interrupt is directly taken from resources. This patch changes this to use the more generic platform_get_irq(), which handles the deferral. Moreover, since commit Fixes: 7085a7401ba5 ("drivers: platform: parse IRQ flags from resources"), the interrupt trigger flags are honored in platform_get_irq(), so remove the needless code in dm9000. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Sergei Ianovich <ynvich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-08dm9000: fix a typoBarry Song
Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15dm9000: Add regulator and reset support to dm9000Zubair Lutfullah Kakakhel
In boards, the dm9000 chip's power and reset can be controlled by gpio. It makes sense to add them to the dm9000 driver and let dt be used to enable power and reset the phy. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12net: ethernet: davicom: Allow to select DM9000 for nios2Tobias Klauser
This chip is present on older revisions of the DE2 development kit. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-20net: ethernet: davicom: drop owner assignment from platform_driversWolfram Sang
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-10-03net: ethernet: Remove superfluous ether_setup after alloc_etherdevTobias Klauser
There is no need to call ether_setup after alloc_ethdev since it was already called there. Follow commits c706471b2601 ("net: axienet: remove unnecessary ether_setup after alloc_etherdev") and 3c87dcbfb36c ("net: ll_temac: Remove unnecessary ether_setup after alloc_etherdev") and fix the pattern in all remaining ethernet drivers. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()Tobias Klauser
In one error condition dm9000_parse_dt() returns NULL, however the return value is checked using IS_ERR() in dm9000_probe(), leading to the error not being properly propagated if CONFIG_OF is not enabled or the device tree data is not available. Fix this by also returning an ERR_PTR() in this case. Fixes: 0b8bf1baabe5 (net: dm9000: Allow instantiation using device tree) Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-08dm9000: Remove typedef board_info_tHimangi Saraogi
The Linux kernel coding style guidelines suggest not using typedefs for structure types. This patch gets rid of the typedef for board_info_t. Also, the name of the structs is changed to drop the _t, to make the name look less typedef-like. The following Coccinelle semantic patch detects the cases: @tn@ identifier i; type td; @@ -typedef struct i { ... } -td ; @@ type tn.td; identifier tn.i; @@ -td + struct i Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-02dm9000: NULL dereferences on error in probe()Dan Carpenter
The dm9000_release_board() function is called with NULL ->data_req and ->addr_req pointers if dm9000_probe() fails. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: avoid sleeping in dm9000_timeout callbackAndrew Ruder
On the DM9000B, dm9000_msleep() is called during the dm9000_timeout() routine. Since dm9000_timeout() holds the main spinlock through the entire routine, mdelay() needs to be used rather than msleep(). Furthermore, the mutex_lock()/mutex_unlock() should be avoided so as to not sleep with spinlocks held. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: handle initial link statusAndrew Ruder
On the DM9000A/DM9000B force the initial check of the link status. The DM9000A/B has a link status changed event and this interrupt bit isn't always set out of reset when a cable is plugged in. This results in the driver not seeing the cable attached link status until the cable is removed and plugged in again. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: remove redundant ISR status clearAndrew Ruder
Since dm9000_interrupt() is already reading/clearing every set bit in DM9000_ISR, this additional clear in dm9000_rx() (which is only called by dm9000_interrupt()) is unnecessary and can be removed. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: clean up edge-triggered irq compatibilityAndrew Ruder
DM9000 uses level-triggered interrupts. Some systems (PXA270) only support edge-triggered interrupts on GPIOs. Some changes are necessary to ensure that interrupts are not triggered while the GPIO interrupt is masked or we will miss the interrupt forever. * Make some helper functions called dm9000_mask_interrupts() and dm9000_unmask_interrupts() for readability. * dm9000_init_dm9000(): ensure that this function always leaves interrupts masked regardless of the state when it entered the function. This is primarily to support the situation in dm9000_open where the logic used to go: dm9000_open() dm9000_init_dm9000() unmask interrupts request_irq() If an interrupt occurred between unmasking the interrupt and requesting the irq, it would be missed forever as the edge event would never be seen by the GPIO hardware in the PXA270. This allows us to change the logic to: dm9000_open() dm9000_init_dm9000() dm9000_mask_interrupts() request_irq() dm9000_unmask_interrupts() * dm9000_timeout(), dm9000_drv_resume(): Add the missing dm9000_unmask_interrupts() now required by the change above. * dm9000_shutdown(): Use mask helper function * dm9000_interrupt(): Use mask/unmask helper functions Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: clean up reset codeAndrew Ruder
* Change a hard-coded 0x3 to NCR_RST | NCR_MAC_LBK in dm9000_reset * Every single place where dm9000_init_dm9000 was ran, a dm9000_reset was called immediately before-hand. Bring dm9000_reset into dm9000_init_dm9000. * The following commit updated the dm9000_probe reset routine to use NCR_RST | NCR_MAC_LBK: 6741f40 DM9000B: driver initialization upgrade and a later commit added a bug-fix to always reset the chip twice: 09ee9f8 dm9000: Implement full reset of DM9000 network device Unfortunately, since the changes in 6741f40 were made by replacing the dm9000_probe dm9000_reset with the adjusted iow(), the changes in 09ee9f8 were not incorporated into the dm9000_probe reset. Furthermore, it bypassed the requisite reset-delay causing some boards to get at least one "read wrong id ..." dev_err message during dm9000_probe. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-05dm9000: acquire irq flags from device treeAndrew Ruder
The DM9000 supports both active high interrupts and active low interrupts. This is configured via the attached EEPROM. In the device-tree case, make sure that the DM9000 driver passes the correct flags to request_irq. Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24dm9000: Call dev_consume_skb_any instead of dev_kfree_skb.Eric W. Biederman
Replace dev_kfree_skb with dev_consume_skb_any in dm9000_start_xmit that can be called in hard irq and other contexts, on the path that successfully transmits the packet. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-01-16dm9000: fix a lot of checkpatch issuesBarry Song
recently, dm9000 codes have many checkpatch errors and warnings: WARNING: please, no space before tabs 3: FILE: dm9000.c:3: + * ^ICopyright (C) 1997 Sten Wang$ WARNING: please, no space before tabs 5: FILE: dm9000.c:5: + * ^IThis program is free software; you can redistribute it and/or$ WARNING: please, no space before tabs 6: FILE: dm9000.c:6: + * ^Imodify it under the terms of the GNU General Public License$ WARNING: please, no space before tabs 7: FILE: dm9000.c:7: + * ^Ias published by the Free Software Foundation; either version 2$ WARNING: please, no space before tabs 8: FILE: dm9000.c:8: + * ^Iof the License, or (at your option) any later version.$ WARNING: please, no space before tabs 10: FILE: dm9000.c:10: + * ^IThis program is distributed in the hope that it will be useful,$ WARNING: please, no space before tabs 11: FILE: dm9000.c:11: + * ^Ibut WITHOUT ANY WARRANTY; without even the implied warranty of$ WARNING: please, no space before tabs 12: FILE: dm9000.c:12: + * ^IMERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the$ WARNING: please, no space before tabs 13: FILE: dm9000.c:13: + * ^IGNU General Public License for more details.$ WARNING: do not add new typedefs 97: FILE: dm9000.c:97: +typedef struct board_info { ERROR: spaces prohibited around that ':' (ctx:WxV) 113: FILE: dm9000.c:113: + unsigned int in_suspend :1; ^ ERROR: spaces prohibited around that ':' (ctx:WxV) 114: FILE: dm9000.c:114: + unsigned int wake_supported :1; ^ This patch fixes important errors in it. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: report the correct LPANikita Kiryanov
Report the LPA by checking mii_if_info, instead of just saying "no LPA" every time. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: Implement full reset of DM9000 network deviceMichael Abbott
A Davicom application note for the DM9000 network device recommends performing software reset twice to correctly initialise the device. Without this reset some devices fail to initialise correctly on system startup. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: take phy out of reset during initNikita Kiryanov
Take the phy out of reset explicitly during system resume to avoid losing network connectivity. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-17dm9000: during init reset phy only for dm9000bNikita Kiryanov
Some of the changes introduced in commit 6741f40 (DM9000B: driver initialization upgrade) break functionality on DM9000A (error message during NFS boot: "dm9000 dm9000.0: eth0: link down") Since the changes were meant to serve only DM9000B, make them dependent on the chip type. Cc: David S. Miller <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30net: dm9000: use dev_get_platdata()Jingoo Han
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: Move MII out from under NET_CORE and hide itBen Hutchings
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-27net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20net: dm9000: Allow instantiation using device treeTomasz Figa
This patch adds Device Tree support to dm9000 driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17net: ethernet: davicom: dm9000: initialize variables directlyEmilio López
Clean up the code a bit to initialize the variables directly when defining them. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31DM9000B: driver initialization upgradeJoseph CHANG
Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: Joseph CHANG <josright123@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-18net: dm9000: Use module_platform_driver()Sachin Kamat
module_platform_driver macro removes some boilerplate and makes the code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10net: dm9000: use io{read,write}*_rep accessorsMatthew Leach
The {read,write}s{b,w,l} operations are not defined by all architectures and are being removed from the asm-generic/io.h interface. This patch replaces the usage of these string functions in the default DM9000 accessors with io{read,write}{8,16,32}_rep calls instead. This is required as the dm9000 driver is in use by the blackfin architecture which uses the asm-generic io accessors. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ben Herrenschmidt <benh@kernel.crashing.org> Cc: David Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: Matthew Leach <matthew@mattleach.net> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03dm9000: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-14dm9000: some coldfire boards need thisSteven King
Some coldfire boards (ie m5253demo) have a dm9000 onboard. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-06netdev: ethernet dev_alloc_skb to netdev_alloc_skbPradeep A Dalvi
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: Pradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-11-26dm9000: Fix check for disabled wake on LANMark Brown
We're trying to check if any options are defined which isn't wha the existing code does due to confusing & and &&. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15MII: fix Kconfig dependencies for MIIJeff Kirsher
MII Kconfig option is apart of the core networking drivers and by default NET_CORE is enabled so drivers selecting MII will have MII enabled as well. It was found using the randconfig option during testing, MII would be selected but NET_CORE could be disabled. This caused a dependency error. Resolved the dependency by selecting NET_CORE when MII is selected. Reported-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20dm9000: define debug level as a module parameterVladimir Zapolskiy
This change allows to get driver specific debug messages output providing a module parameter. As far as the maximum level of verbosity is too high, it is demoted by default. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 22:22:32 +0000