summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cisco
AgeCommit message (Collapse)Author
2015-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-01-04enic: reconfigure resources for kdump crash kernelGovindarajulu Varadarajan
When running in kdump kernel, reduce number of resources used by the driver. This will enable NIC to operate in low memory kdump kernel environment. Also change the driver version to .83 Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02enic: free all rq buffs when allocation failsGovindarajulu Varadarajan
When allocation of all RQs fail, we do not free previously allocated buffers, before returning error. This causes memory leak. This patch fixes this by calling vnic_rq_clean(), which frees all the rq buffers. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02net: ethernet: cisco: enic: enic_dev: Remove some unused functionsRickard Strandqvist
Removes some functions that are not used anywhere: enic_dev_enable2_done() enic_dev_enable2() enic_dev_deinit_done() enic_dev_init_prov2() enic_vnic_dev_deinit() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: add stats for dma mapping errorGovindarajulu Varadarajan
This patch adds generic statistics for enic. As of now dma_map_error is the only member. dma_map_erro is incremented every time dma maping error happens. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: check dma_mapping_errorGovindarajulu Varadarajan
This patch checks for pci_dma_mapping_error() after dma mapping the data. If the dma mapping fails we remove the previously queued frags and return NETDEV_TX_OK. Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31enic: make vnic_wq_buf doubly linkedGovindarajulu Varadarajan
This patch makes vnic_wq_buf doubly liked list. This is needed for dma_mapping error check, in case some frag's dma map fails, we need to move back and remove previously queued buffers. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-19enic: fix rx skb checksumGovindarajulu Varadarajan
Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: <IRQ> [<ffffffff815e237b>] dump_stack+0x19/0x1b kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40 kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70 kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20 kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100 kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0 kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc <jbenc@redhat.com> Cc: Stefan Assmann <sassmann@redhat.com> Reported-by: Sunil Choudhary <schoudha@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10enic: add support for set/get rss hash keyGovindarajulu Varadarajan
This patch adds support for setting/getting rss hash key using ethtool. v2: respin patch to support RSS hash function changes. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23enic: use netdev_rss_key_fill() helperEric Dumazet
Use of well known RSS key might increase attack surface. Switch to a random one, using generic helper so that all ports share a common key. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Govindarajulu Varadarajan <_govind@gmx.com> Cc: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23enic: use spin_lock(wq_lock) instead of spin_lock_irqsave(wq_lock)Govindarajulu Varadarajan
All the access to wq has been moved out of hardirq context. We no longer need to use spin_lock_irqsave. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23enic: use napi_schedule_irqoff()Govindarajulu Varadarajan
enic_isr_legacy(), enic_isr_msix() & enic_isr_msi() run from hard interrupt context. They can use napi_schedule_irqoff() instead of napi_schedule() Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21enic: support skb->xmit_moreGovindarajulu Varadarajan
Check and update posted_index only when skb->xmit_more is 0 or tx queue is full. v2: use txq_map instead of skb_get_queue_mapping(skb) Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12enic: fix work done in tx napi_pollGovindarajulu Varadarajan
With the commit d75b1ade567 ("net: less interrupt masking in NAPI") napi repoll is done only when work_done == budget. In tx napi poll we always return 0. So tx napi is not called again and we do not clean up the tx ring. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06enic: update desc properly in rx_copybreakGovindarajulu Varadarajan
When we reuse the rx buffer, we need to update the desc. If not hardware sees stale value. In the following crash, when mtu is changed, hardware sees old rx buffer value and crashes on skb_put. Fix this by using enic_queue_rq_desc helper function which updates the necessary desc. [ 64.657376] skbuff: skb_over_panic: text:ffffffffa041f55d len:9010 put:9010 head:ffff8800d3ca9fc0 data:ffff8800d3caa000 tail:0x2372 end:0x640 dev:enp0s3 [ 64.659965] ------------[ cut here ]------------ [ 64.661322] kernel BUG at net/core/skbuff.c:100! [ 64.662644] invalid opcode: 0000 [#1] PREEMPT SMP [ 64.664001] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 cirrus ttm drm_kms_helper drm enic psmouse microcode evdev serio_raw syscopyarea sysfillrect sysimgblt i2c_piix4 i2c_core pcspkr nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod ata_generic virtio_balloon ata_piix libata uhci_hcd virtio_pci virtio_ring usbcore usb_common virtio scsi_mod [ 64.664834] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-10335-g942396b-dirty #273 [ 64.664834] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 64.664834] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 64.664834] RIP: 0010:[<ffffffff81392cf1>] [<ffffffff81392cf1>] skb_panic+0x61/0x70 [ 64.664834] RSP: 0018:ffff880210603d48 EFLAGS: 00010292 [ 64.664834] RAX: 000000000000008c RBX: ffff88020b0f6930 RCX: 0000000000000000 [ 64.664834] RDX: 000000000000008c RSI: ffffffff8178b288 RDI: 00000000ffffffff [ 64.664834] RBP: ffff880210603d68 R08: 0000000000000001 R09: 0000000000000001 [ 64.664834] R10: 00000000000005ce R11: 0000000000000001 R12: ffff88020b1f0b40 [ 64.664834] R13: 000000000000a332 R14: ffff880209a1a000 R15: 0000000000000001 [ 64.664834] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 64.664834] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 64.664834] CR2: 00007f6752935e48 CR3: 0000000035743000 CR4: 00000000000006f0 [ 64.664834] Stack: [ 64.664834] ffff8800d3caa000 0000000000002372 0000000000000640 ffff88020b1f0000 [ 64.664834] ffff880210603d78 ffffffff81392d54 ffff880210603e08 ffffffffa041f55d [ 64.664834] 0000000000000296 ffffffff00000000 00008e7e00008e7e ffff880200002332 [ 64.664834] Call Trace: [ 64.664834] <IRQ> [ 64.664834] [ 64.664834] [<ffffffff81392d54>] skb_put+0x54/0x60 [ 64.664834] [<ffffffffa041f55d>] enic_rq_service.constprop.47+0x3ad/0x730 [enic] [ 64.664834] [<ffffffffa041fa79>] enic_poll_msix_rq+0x199/0x370 [enic] [ 64.664834] [<ffffffff813a5499>] net_rx_action+0x139/0x210 [ 64.664834] [<ffffffff81290db3>] ? __this_cpu_preempt_check+0x13/0x20 [ 64.664834] [<ffffffff8106110e>] __do_softirq+0x14e/0x280 [ 64.664834] [<ffffffff8106152e>] irq_exit+0x8e/0xb0 [ 64.664834] [<ffffffff8100fd21>] do_IRQ+0x61/0x100 [ 64.664834] [<ffffffff814a2bf2>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06enic: handle error condition properly in enic_rq_indicate_bufGovindarajulu Varadarajan
In case of error in rx path, we free the buf->os_buf but we do not make it NULL. In next iteration we use the skb which is already freed. This causes the following crash. [ 886.154772] general protection fault: 0000 [#1] PREEMPT SMP [ 886.154851] Modules linked in: rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 microcode evdev cirrus ttm drm_kms_helper drm enic syscopyarea sysfillrect sysimgblt psmouse i2c_piix4 serio_raw pcspkr i2c_core nfs lockd grace sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common ata_generic ata_piix virtio_balloon libata scsi_mod uhci_hcd usbcore virtio_pci virtio_ring virtio usb_common [ 886.155199] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.17.0-netnext-05668-g876bc7f #272 [ 886.155263] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 886.155304] task: ffffffff81a1d580 ti: ffffffff81a00000 task.ti: ffffffff81a00000 [ 886.155356] RIP: 0010:[<ffffffff81384030>] [<ffffffff81384030>] kfree_skb_list+0x10/0x30 [ 886.155418] RSP: 0018:ffff880210603d48 EFLAGS: 00010206 [ 886.155456] RAX: 0000000000000020 RBX: 0000000000000000 RCX: 0000000000000000 [ 886.155504] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 004500084e000017 [ 886.155553] RBP: ffff880210603d50 R08: 00000000fe13d1b6 R09: 0000000000000001 [ 886.155601] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880209ff2f00 [ 886.155650] R13: ffff88020ac0fe40 R14: ffff880209ff2f00 R15: ffff8800da8e3a80 [ 886.155699] FS: 0000000000000000(0000) GS:ffff880210600000(0000) knlGS:0000000000000000 [ 886.155774] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 886.155814] CR2: 00007f0e0c925000 CR3: 0000000035e8b000 CR4: 00000000000006f0 [ 886.155865] Stack: [ 886.155882] 0000000000000000 ffff880210603d78 ffffffff81383f79 ffff880209ff2f00 [ 886.155942] ffff88020b0c0b40 000000000000c000 ffff880210603d90 ffffffff81383faf [ 886.156001] ffff880209ff2f00 ffff880210603da8 ffffffff8138406d ffff88020b1b08c0 [ 886.156061] Call Trace: [ 886.156080] <IRQ> [ 886.156095] [ 886.156112] [<ffffffff81383f79>] skb_release_data+0xa9/0xc0 [ 886.157656] [<ffffffff81383faf>] skb_release_all+0x1f/0x30 [ 886.159195] [<ffffffff8138406d>] consume_skb+0x1d/0x40 [ 886.160719] [<ffffffff813942e5>] __dev_kfree_skb_any+0x35/0x40 [ 886.162224] [<ffffffffa02dc1d5>] enic_rq_service.constprop.47+0xe5/0x5a0 [enic] [ 886.163756] [<ffffffffa02dc829>] enic_poll_msix_rq+0x199/0x370 [enic] [ 886.164730] [<ffffffff81397e29>] net_rx_action+0x139/0x210 [ 886.164730] [<ffffffff8105fb2e>] __do_softirq+0x14e/0x280 [ 886.164730] [<ffffffff8105ff2e>] irq_exit+0x8e/0xb0 [ 886.164730] [<ffffffff8100fc1d>] do_IRQ+0x5d/0x100 [ 886.164730] [<ffffffff81496832>] common_interrupt+0x72/0x72 fixes: a03bb56e67c357980dae886683733dab5583dc14 ("enic: implement rx_copybreak") Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-21enic: Do not call napi_disable when preemption is disabled.Govindarajulu Varadarajan
In enic_stop, we disable preemption using local_bh_disable(). We disable preemption to wait for busy_poll to finish. napi_disable should not be called here as it might sleep. Moving napi_disable() call out side of local_bh_disable. BUG: sleeping function called from invalid context at include/linux/netdevice.h:477 in_atomic(): 1, irqs_disabled(): 0, pid: 443, name: ifconfig INFO: lockdep is turned off. Preemption disabled at:[<ffffffffa029c5c4>] enic_rfs_flw_tbl_free+0x34/0xd0 [enic] CPU: 31 PID: 443 Comm: ifconfig Not tainted 3.17.0-netnext-05504-g59f35b8 #268 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 ffff8800dac10000 ffff88020b8dfcb8 ffffffff8148a57c 0000000000000000 ffff88020b8dfcd0 ffffffff8107e253 ffff8800dac12a40 ffff88020b8dfd10 ffffffffa029305b ffff88020b8dfd48 ffff8800dac10000 ffff88020b8dfd48 Call Trace: [<ffffffff8148a57c>] dump_stack+0x4e/0x7a [<ffffffff8107e253>] __might_sleep+0x123/0x1a0 [<ffffffffa029305b>] enic_stop+0xdb/0x4d0 [enic] [<ffffffff8138ed7d>] __dev_close_many+0x9d/0xf0 [<ffffffff8138ef81>] __dev_close+0x31/0x50 [<ffffffff813974a8>] __dev_change_flags+0x98/0x160 [<ffffffff81397594>] dev_change_flags+0x24/0x60 [<ffffffff814085fd>] devinet_ioctl+0x63d/0x710 [<ffffffff81139c16>] ? might_fault+0x56/0xc0 [<ffffffff81409ef5>] inet_ioctl+0x65/0x90 [<ffffffff813768e0>] sock_do_ioctl+0x20/0x50 [<ffffffff81376ebb>] sock_ioctl+0x20b/0x2e0 [<ffffffff81197250>] do_vfs_ioctl+0x2e0/0x500 [<ffffffff81492619>] ? sysret_check+0x22/0x5d [<ffffffff81285f23>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8109fe19>] ? trace_hardirqs_on_caller+0x119/0x270 [<ffffffff811974ac>] SyS_ioctl+0x3c/0x80 [<ffffffff814925ed>] system_call_fastpath+0x1a/0x1f Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-21enic: fix possible deadlock in enic_stop/ enic_rfs_flw_tbl_freeGovindarajulu Varadarajan
The following warning is shown when spinlock debug is enabled. This occurs when enic_flow_may_expire timer function is running and enic_stop is called on same CPU. Fix this by using spink_lock_bh(). ================================= [ INFO: inconsistent lock state ] 3.17.0-netnext-05504-g59f35b8 #268 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. ifconfig/443 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&enic->rfs_h.lock)->rlock){+.?...}, at: enic_rfs_flw_tbl_free+0x34/0xd0 [enic] {IN-SOFTIRQ-W} state was registered at: [<ffffffff810a25af>] __lock_acquire+0x83f/0x21c0 [<ffffffff810a45f2>] lock_acquire+0xa2/0xd0 [<ffffffff814913fc>] _raw_spin_lock+0x3c/0x80 [<ffffffffa029c3d5>] enic_flow_may_expire+0x25/0x130[enic] [<ffffffff810bcd07>] call_timer_fn+0x77/0x100 [<ffffffff810bd8e3>] run_timer_softirq+0x1e3/0x270 [<ffffffff8105f9ae>] __do_softirq+0x14e/0x280 [<ffffffff8105fdae>] irq_exit+0x8e/0xb0 [<ffffffff8103da0f>] smp_apic_timer_interrupt+0x3f/0x50 [<ffffffff81493742>] apic_timer_interrupt+0x72/0x80 [<ffffffff81018143>] default_idle+0x13/0x20 [<ffffffff81018a6a>] arch_cpu_idle+0xa/0x10 [<ffffffff81097676>] cpu_startup_entry+0x2c6/0x330 [<ffffffff8103b7ad>] start_secondary+0x21d/0x290 irq event stamp: 2997 hardirqs last enabled at (2997): [<ffffffff81491865>] _raw_spin_unlock_irqrestore+0x65/0x90 hardirqs last disabled at (2996): [<ffffffff814915e6>] _raw_spin_lock_irqsave+0x26/0x90 softirqs last enabled at (2968): [<ffffffff813b57a3>] dev_deactivate_many+0x213/0x260 softirqs last disabled at (2966): [<ffffffff813b5783>] dev_deactivate_many+0x1f3/0x260 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&enic->rfs_h.lock)->rlock); <Interrupt> lock(&(&enic->rfs_h.lock)->rlock); *** DEADLOCK *** Reported-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-09drivers/net: Convert remaining uses of pr_warning to pr_warnJoe Perches
Use the much more common pr_warn instead of pr_warning. Other miscellanea: o Typo fixes submiting/submitting o Coalesce formats o Realign arguments o Add missing terminating '\n' to formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05enic: Add tunable_ops support for rx_copybreakGovindarajulu Varadarajan
This patch adds support for setting/getting rx_copybreak using generic ethtool tunable. Defines enic_get_tunable() & enic_set_tunable() to get/set rx_copybreak. As of now, these two function supports only rx_copybreak. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05enic: implement rx_copybreakGovindarajulu Varadarajan
Calling dma_map_single()/dma_unmap_single() is quite expensive compared to copying a small packet. So let's copy short frames and keep the buffers mapped. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-08enic: use pci_zalloc_consistentJoe Perches
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Govindarajulu Varadarajan <_govind@gmx.com> Cc: Neel Patel <neepatel@cisco.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-07-21enic: Add ethtool support to show classifier filters added by the driverGovindarajulu Varadarajan
This patch impliments ethtool_ops->get_rxnfc() to display the classifier filter added by the driver. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-21enic: remove #ifdef CONFIG_RFS_ACCEL around filter structuresGovindarajulu Varadarajan
This patch removes the #ifdef CONFIG_RFS_ACCEL around the classifier filter structures. This makes the filter structures available when CONFIG_RFS_ACCEL = n. Introduce enic_rfs_timer_start() & enic_rfs_timer_stop() to start/stop the timer. These two functions are nop when CONFIG_RFS_ACCEL = n. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-07enic: fix return values in enic_set_coalesceGovindarajulu Varadarajan
enic_set_coalesce() has two problems. * It should return -EINVAL and not -EOPNOTSUPP for invalid coalesce values. * In case of MSIX, enic_set_coalesce return error after applying requested coalescing setting partially. We should either apply all the setting requeste and return success or apply non and return error. * This patch also simplifies the algo. This was introduced by '7c2ce6e60f703 enic: Add support for adaptive interrupt coalescing' These changes were suggested by Ben Hutchings here http://www.spinics.net/lists/netdev/msg283972.html Also change enic driver version. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-25enic: Make dummy rfs functions inline to fix !CONFIG_RFS_ACCEL buildGeert Uytterhoeven
If CONFIG_RFS_ACCEL=n: drivers/net/ethernet/cisco/enic/enic_main.c: In function 'enic_open': drivers/net/ethernet/cisco/enic/enic_main.c:1603:2: error: implicit declaration of function 'enic_rfs_flw_tbl_init' [-Werror=implicit-function-declaration] drivers/net/ethernet/cisco/enic/enic_main.c: In function 'enic_stop': drivers/net/ethernet/cisco/enic/enic_main.c:1630:2: error: implicit declaration of function 'enic_rfs_flw_tbl_free' [-Werror=implicit-function-declaration] Introduced in commit a145df23ef32c7b933875f334ba28791ee75766e ("enic: Add Accelerated RFS support"). Dummy functions are provided, but their prototypes are missing, causing the build failure. Provide dummy static inline functions instead to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: Kill unused variable in enic_rfs_flw_tbl_init().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: do tx cleanup in napi pollGovindarajulu Varadarajan
Till now enic had been doing tx clean in isr. Using napi infrastructure to move the tx clean up out of isr to softirq. Now, wq isr schedules napi poll. In enic_poll_msix_wq we clean up the tx queus. This is applicable only on MSIX. In INTx and MSI we use single napi to clean both rx & tx queues. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: add low latency socket busy_poll supportGovindarajulu Varadarajan
This patch adds support for low latency busy_poll. * Introduce drivers ndo_busy_poll function enic_busy_poll, which is called by socket waiting for data. * Introduce locking between napi_poll nad busy_poll * enic_busy_poll cleans up all the rx pkts possible. While in busy_poll, rq holds the state ENIC_POLL_STATE_POLL. While in napi_poll, rq holds the state ENIC_POLL_STATE_NAPI. * in napi_poll we return if we are in busy_poll. Incase of INTx & msix, we just service wq and return if busy_poll is going on. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: fix lockdep around devcmd_lockTony Camuso
We were experiencing occasional "BUG: scheduling while atomic" splats in our testing. Enabling DEBUG_SPINLOCK and DEBUG_LOCKDEP in the kernel exposed a lockdep in the enic driver. enic 0000:0b:00.0 eth2: Link UP ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 3.12.0-rc1.x86_64-dbg+ #2 Tainted: GF W ------------------------------------------------------ NetworkManager/4209 [HC0[0]:SC0[2]:HE1:SE0] is trying to acquire: (&(&enic->devcmd_lock)->rlock){+.+...}, at: [<ffffffffa026b7e4>] enic_dev_packet_filter+0x44/0x90 [enic] The fix was to replace spin_lock with spin_lock_bh for the enic devcmd_lock, so that soft irqs would be disabled while the lock is held. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Tony Camuso <tcamuso@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: Add Accelerated RFS supportGovindarajulu Varadarajan
This patch adds supports for Accelerated Receive Flow Steering. When the desired rx is different from current rq, for a flow, kernel calls the driver function enic_rx_flow_steer(). enic_rx_flow_steer adds a IP-TCP/UDP hardware filter. Driver registers a timer function enic_flow_may_expire. This function is called every HZ/4 seconds. In this function we check if the added filter has expired by calling rps_may_expire_flow(). If the flow has expired, it removes the hw filter. As of now adaptor supports only IPv4 - TCP/UDP filters. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: alloc/free rx_cpu_rmapGovindarajulu Varadarajan
rx_cpu_rmap provides the reverse irq cpu affinity. This patch allocates and sets drivers netdev->rx_cpu_rmap accordingly. rx_cpu_rmap is set in enic_request_intr() which is called by enic_open and rx_cpu_rmap is freed in enic_free_intr() which is called by enic_stop. This is used by Accelerated RFS. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: devcmd for adding IP 5 tuple hardware filtersGovindarajulu Varadarajan
This patch adds interface to add and delete IP 5 tuple filter. This interface is used by Accelerated RFS code to steer a flow to corresponding receive queue. As of now adaptor supports only ipv4 + tcp/udp packet steering. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-23enic: fix return value in _vnic_dev_cmdGovindarajulu Varadarajan
Hardware (in readq(&devcmd->args[0])) returns positive number in case of error. But _vnic_dev_cmd should return a negative value in case of error. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02enic: Update driver to use __dev_uc/mc_sync/unsync callsAlexander Duyck
This change updates the enic driver to make use of __dev_uc_sync and __dev_mc_sync calls. Previously the driver was doing its own list management by storing the mc_addr and uc_addr list in a 32 address array. With this change the sync data is stored in the netdev_addr_list structures and instead we just track how many addresses we have written to the device. When we encounter 32 we stop and print a message as occurred previously with the old approach. Other than the core change the only other bit needed was to propagate the constant attribute with the MAC address as there were several spots where is twas only passed as a u8 * instead of a const u8 *. This patch is meant to maintain the original functionality without the use of the mc_addr and uc_addr arrays. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30enic: Fix 64 bit divide on 32bit systemGovindarajulu Varadarajan
Division of a 32 bit number by a 64 bit number causes the following link error introduced by 7c2ce6e60f703 "enic: Add support for adaptive interrupt coalescing" drivers/built-in.o: In function `enic_poll_msix': enic_main.c:(.text+0x48710a): undefined reference to `__udivdi3' make: *** [vmlinux] Error 1 Since numerator is 32 bit, convert denominator to 32 bit accordingly. Fixes: 7c2ce6e60f703 ("enic: Add support for adaptive interrupt coalescing") Reported-by: Jim Davis <jim.epost@gmail.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-21enic: Add support for adaptive interrupt coalescingSujith Sankar
This patch adds support for adaptive interrupt coalescing. For small pkts with low pkt rate, we can decrease the coalescing interrupt dynamically which decreases the latency. This however increases the cpu utilization. Based on testing with different coal intr and pkt rate we came up with a table(mod_table) with rx_rate and coalescing interrupt value where we get low latency without significant increase in cpu. mod_table table stores the coalescing timer percentage value for different throughputs. Function enic_calc_int_moderation() calculates the desired coalescing intr timer value. This function is called in driver rx napi_poll. The actual value is set by enic_set_int_moderation() which is called when napi_poll is complete. i.e when we unmask the rx intr. Adaptive coal intr is support only when driver is using msix intr. Because intr is not shared. Struct mod_range is used to store only the default adaptive coalescing intr value. Adaptive coal intr calue is calculated by timer = range_start + ((rx_coal->range_end - range_start) * mod_table[index].range_percent / 100); rx_coal->range_end is the rx-usecs-high value set using ethtool. range_start is rx-usecs-low, set using ethtool, if rx_small_pkt_bytes_cnt is greater than 2 * rx_large_pkt_bytes_cnt. i.e small pkts are dominant. Else its rx-usecs-low + 3. Cc: Christian Benvenuti <benve@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net: get rid of SET_ETHTOOL_OPSWilfried Klaebe
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-03net: enic: include irq.h for irqreturn_t definitionsJosh Boyer
The enic driver fails to build on ARM with: In file included from drivers/net/ethernet/cisco/enic/enic_res.c:40:0: drivers/net/ethernet/cisco/enic/enic.h:48:2: error: expected specifier-qualifier-list before 'irqreturn_t' irqreturn_t (*isr)(int, void *); ^ Nothing in the driver is explicitly including the irq definitions, so we add an include of linux/irq.h to pick them up. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24enic: Call dev_kfree_skb_any instead of dev_kfree_skb.Eric W. Biederman
Replace dev_kfree_skb with dev_kfree_skb_any in enic_hard_start_xmit that can be called in hard irq and other contexts. enic_hard_start_xmit only frees the skb when dropping it. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-03-14enic: Don't receive packets when the napi budget == 0Eric W. Biederman
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-18enic: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Cc: Neel Patel <neepatel@cisco.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-31net: enic: slight optimization of addr comparedingtianhong
Use possibly more efficient ether_addr_equal to instead of memcmp. Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Cc: Neel Patel <neepatel@cisco.com> Cc: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18net: cisco-enic calls skb_set_hashTom Herbert
Drivers should call skb_set_hash to set the hash and its type in an skbuff. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18net: enic: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: update enic maintainers and drivergovindarajulu.v
Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Exposing symbols for Cisco's low latency drivergovindarajulu.v
This patch exposes symbols for usnic low latency driver that can be used to register and unregister vNics as well to traverse the resources on vNics. Signed-off-by: Upinder Malhi <umalhi@cisco.com> Signed-off-by: Nishank Trivedi <nistrive@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05driver/net: enic: Try DMA 64 first, then failover to DMAgovindarajulu.v
In servers with more than 1.1 TB of RAM, the existing 40/32 bit DMA could cause failure as the DMA-able address could go outside the range addressable using 40/32 bits. The following patch first tried 64 bit DMA if possible, failover to 32 bit. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Govindarajulu Varadarajan <govindarajulu90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 06:32:22 +0000