summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/brocade
AgeCommit message (Collapse)Author
2012-12-11bna: Driver Version Updated to 3.1.2.1Rasesh Mody
Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Firmware updateRasesh Mody
Change Details: - Added Stats clear counter to the bfi_enet_stats_mac structure and ethtool stats - Modified the firmware naming convention to contain the firmware image version (3.1.0.0). The new convention is <firmware-image>-<firmware-version>.bin The change will enforce loading only compatible firmware with this driver and also avoid over-writing the old firmware image in-order to load new version driver as the firmware names used to be the same. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Add RX StateRasesh Mody
Change Details: - BNA state machine for Rx in start_wait state moves it to stop_wait on receipt of RX_E_STOP. In Rx stop_wait state, on receipt of RX_E_STARTED event does enet stop RX_E_STOPPED event does rx_cleanup_cbfn rx_cleanup_cbfn in this case is called without post_cbfn. post_cbfn happens only after RX_E_STARTED event is received in start_wait. Without doing post_cbfn, NAPI remains disabled and in cleanup we try to disable again causing endless wait. ifconfig process and other workers can thus get stuck. - Introducing start_stop_wait state for Rx. This state handles the case of if post_cbfn is not done simply do stop without the cleanup. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Rx Page Based AllocationRasesh Mody
Change Details: Enhanced support for GRO. Page-base allocation method for Rx buffers is used in GRO. Skb allocation has been removed in Rx path to use always warm-cache skbs provided by napi_get_frags. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: TX Intr Coalescing FixRasesh Mody
Change Details: For Tx IB, IPM was enabled with inter_pkt_timeo of 0. This caused the Tx IB not to generate interrupt till inter_pkt_count of packets have been received. Correct definition for BFI_TX_INTERPKT_TIMEO & BFI_TX_INTERPKT_COUNT Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Tx and Rx OptimizationsRasesh Mody
Change details: - Have contiguous queue pages for TxQ, RxQ and CQ. Data structure and QPT changes related to contiguous queue pages - Optimized Tx and Rx unmap structures. Tx and Rx fast path changes due to unmap data structure changes - Re-factored Tx and Rx fastpath routines as per the new queue data structures - Implemented bnad_txq_wi_prepare() to program the opcode, flags, frame_len and num_vectors in the work item - Reduced Max TxQ and RxQ depth to 2048 while default value for Tx/Rx queue depth is unaltered (512) Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-11bna: Code Cleanup and EnhancementsRasesh Mody
Change details: - Remove unnecessary prefetch - Simplify checking & comparison of CQ flags - Dereference & store unmap_array, unmap_cons & current unmap_array element only once - Make structures tx_config & rx_config cache line aligned. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bna: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Rasesh Mody <rmody@brocade.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-02bna: remove useless calls to memset().Cyril Roelandt
These calls are followed by calls to memcpy() on the same memory area, so they can safely be removed. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-27bna: Fix warning false positive.David S. Miller
GCC can't see that in all non-error-return paths we do in fact set *using_dac to something. Add an explicit initialization to remove this warning: drivers/net/ethernet/brocade/bna/bnad.c: In function ‘bnad_pci_probe’: drivers/net/ethernet/brocade/bna/bnad.c:3079:5: warning: ‘using_dac’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/brocade/bna/bnad.c:3233:7: note: ‘using_dac’ was declared here Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix non-kernel-doc comments with kernel-doc start markersBen Hutchings
Convert doxygen (or similar) formatted comments to kernel-doc or unformatted comment. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-06ethernet: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-04-30bna: remove redundant NULL test before release_firmware()Jesper Juhl
release_firmware() does its own NULL test so explicit test before call is unneeded. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-04bna: Update driver version to 3.0.23.0Jing Huang
Driver version update Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bna: Function name changes and cleanupsJing Huang
Renamed following functions: bnad_cleanup_tx to bnad_destroy_tx bnad_free_all_txbufs to bnad_txq_cleanup bnad_free_txbufs to bnad_txcmpl_process bnad_tx to bnad_tx_complete bnad_cleanup_rx to bnad_destroy_rx bnad_reset_rcb to bnad_rcb_cleanup bnad_free_all_rxbufs to bnad_rxq_cleanup bnad_cq_cmpl_init to bnad_cq_cleanup bnad_alloc_n_post_rxbufs to bnad_rxq_post bnad_poll_cq to bnad_cq_process Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bna: Remove tx taskletJing Huang
The scheduling of tasklet and keeping the interrupts enabled makes interrupt reduntant. 20% of the Tx interrupts have nothing left to process or could not process as Tx tasklet was running. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bna: tx rx cleanup fixJing Huang
This patch removes busy wait in tx/rx cleanup. bnad_cb_tx_cleanup() and bnad_cb_rx_cleanup() functions are called from irq context, and currently they do busy wait for the in-flight transmit or the currently executing napi polling routine to complete. To fix the issue, we create a workqueue to defer tx & rx cleanup processing, an in the tx rx cleanup handler, we will wait respective in flight processing to complete, before freeing the buffers. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bna: ioc cleanupsJing Huang
Remove irrelevant code. Change to start Hearbeat failure moniter after IOC become operational. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bna: Flash controller ioc pll init fixesJing Huang
Added NFC pause/resume logic. We only do NFC pause/resume if NFC version is greater than 0x143 and it was halted before, otherwise we revert to old NFC halt mechanism. Made changes to avoid clearing off the interrupts during the initial pll initialization. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bna: Serialize smem access during adapter initializationJing Huang
Use init semaphore to serialize execution of the "unlock IOC semaphore" code. Added bfa_ioc_fwver_clear() function to clear the firmware header if last firmwar boot is not from driver. Signed-off-by: Jing Huang <huangj@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile 1 from Al Viro: "This is _not_ all; in particular, Miklos' and Jan's stuff is not there yet." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits) ext4: initialization of ext4_li_mtx needs to be done earlier debugfs-related mode_t whack-a-mole hfsplus: add an ioctl to bless files hfsplus: change finder_info to u32 hfsplus: initialise userflags qnx4: new helper - try_extent() qnx4: get rid of qnx4_bread/qnx4_getblk take removal of PF_FORKNOEXEC to flush_old_exec() trim includes in inode.c um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it um: embed ->stub_pages[] into mmu_context gadgetfs: list_for_each_safe() misuse ocfs2: fix leaks on failure exits in module_init ecryptfs: make register_filesystem() the last potential failure exit ntfs: forgets to unregister sysctls on register_filesystem() failure logfs: missing cleanup on register_filesystem() failure jfs: mising cleanup on register_filesystem() failure make configfs_pin_fs() return root dentry on success configfs: configfs_create_dir() has parent dentry in dentry->d_parent configfs: sanitize configfs_create() ...
2012-03-20debugfs-related mode_t whack-a-moleAl Viro
all of those should be umode_t... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-02-13drivers/net: Remove boolean comparisons to true/falseJoe Perches
Booleans should not be compared to true or false but be directly tested or tested with !. Done via cocci script: @@ bool t; @@ - t == true + t @@ bool t; @@ - t != true + !t @@ bool t; @@ - t == false + !t @@ bool t; @@ - t != false + t Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-10Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/infiniband/hw/nes/nes_cm.c Simple whitespace conflict. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-09bna: fix error handling of bnad_get_flash_partition_by_offset()Dan Carpenter
The current error handling doesn't work because we flash_part is a u32 so the checks for negative error codes don't work. I considered making things signed but I don't know the hardware enough to say if that's a problem. Really, we don't use the error codes so just returning zero for all problems is fine. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-01bna: Implement ethtool flash_device entry point.Krishna Gudipati
Incorporated review comments from Ben Hutchings. Change details: - Implement ethtool flash_device() entry point to write the firmware image to the flash firmware partition. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove unnecessary k.alloc/v.alloc OOM messagesJoe Perches
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05bna: fix sparse warnings/errorsstephen hemminger
This fixes a several sparse warnings. * the __iomem tag was being used incorrectly (needs to be a prefix) * several variables should have been static since local to one file * the firmware was not being forwared declared and was const one place and not the other Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05bna: make ethtool_ops and strings conststephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23bna: Add debugfs interface.Krishna Gudipati
Change details: - Add debugfs support to obtain firmware trace, saved firmware trace on an IOC crash, driver info and read/write to registers. - debugfs hierarchy: bna/pci_dev:<pci_name> where the pci_name corresponds to the one under /sys/bus/pci/drivers/bna - Following are the new debugfs entries added: fwtrc: collect current firmware trace. fwsave: collect last saved fw trace as a result of firmware crash. regwr: write one word to chip register regrd: read one or more words from chip register. drvinfo: collect the driver information. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-23bna: Added flash sub-module and ethtool eeprom entry points.Krishna Gudipati
Change details: - The patch adds flash sub-module to the bna driver. - Added ethtool set_eeprom() and get_eeprom() entry points to support flash partition read/write operations. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-19net: fix assignment of 0/1 to bool variables.Rusty Russell
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16bna: Convert MAC_ADDRLEN uses to ETH_ALENJoe Perches
Reduce the number of #defines, use the normal #define from if_ether.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones
Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31drivers/net: Add module.h to drivers who were implicitly using itPaul Gortmaker
The device.h header was including module.h, making it present for most of these drivers. But we want to clean that up. Call out the include of module.h in the modular network drivers. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-07net: Remove unnecessary driver assignments of ethtool_ringparam fields to zeroRick Jones
Per comments from Ben Hutchings on a previous patch, sweep the floors a little removing unnecessary assignments of zero to fields of struct ethtool_ringparam in driver code supporting ethtool -g. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-04bna: Multiple Definition and Interface Setup FixRasesh Mody
drivers/net/built-in.o: In function `bfa_ioc_ct2_poweron': (.text+0xcdc90): multiple definition of `bfa_ioc_ct2_poweron' drivers/scsi/built-in.o:(.text+0x17f9a0): first defined here This patch renames bfa_ioc_ct2_poweron() to bfa_nw_ioc_ct2_poweron() to avoid multiple definition with Brocade scsi driver. It also modifies asic specific interface setup to allocate MSIX resources at power on in case of 1860 HW with no asic block and warns if the asic gen is neither BFI_ASIC_GEN_CT nor BFI_ASIC_GEN_CT2. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Driver Version changed to 3.0.2.2Rasesh Mody
Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Add Callback to Fix RXQ StopRasesh Mody
Change details: - Add a callback in the BNA, which is called before sending FW command to stop RxQs. After this callback is called, driver should not post anymore Rx buffers to the RxQ. This addresses a small window where driver posts Rx buffers while FW is stopping/has stopped the RxQ. - Registering callback function, rx_stall_cbfn, during bna_rx_create. Invoking callback function, rx_stall_cbfn, before sending rx_cfg_clr command to FW - Bnad_cb_rx_stall implementation - set a flag in the Rxq to mark buffer posting disabled state. While posting buffers check for the above flag. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: PLL Init Fix and Add Stats AttributesRasesh Mody
Change details: - Fix to release soft reset in PLL init for HW - Added stats attributes and new bfi msg class - Removed some unused code and typo fixes Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Brocade 1860 HW EnablementRasesh Mody
This patch enables new HW Brocade 1860. Add BFA_CM_NIC capability mask to bfa_ioc_attr, Sub-System Device ID Info and support for Brocade 1860 device ID to bfa_ioc.c and bnad.c. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Implement FW Download for New HWRasesh Mody
Add new device ID 0x22 and new asic generation BFI_ASIC_GEN_CT2 for 1860. Implement FW download from user space for new Brocade HW. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Capability Map and MFG Block Changes for New HWRasesh Mody
Add capability map and generic model name scheme for manufacturing block. Add card types for new HW. Remove bfa_mfg_is_card_type_valid and ibfa_mfg_adapter_prop_init_flash_ct macros. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-29bna: Brocade 1860 IOC PLL, Reg Defs and ASIC Mode ChangesRasesh Mody
Add logic to set ASIC specfic interface in IOC, HW interface initialization APIs, mode based initialization and MSI-X resource allocation for 1860 with no asic block. Add new h/w specific register definitions and setup registers used by IOC logic. Use normal kernel declaration style, c99 initializers and const for mailbox structures. Remove unneeded parentheses. Signed-off-by: Gurunatha Karaje <gkaraje@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-21bna: PCI Probe Conf Lock FixRasesh Mody
If register_netdev() fails now, then we call mutex_unlock(&bnad->conf_mutex); on the error path, but it's already unlocked. So we acquire the lock in error path which will be later unlocked after the cleanup. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 02:15:40 +0000