summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/atheros
AgeCommit message (Collapse)Author
2013-03-29atl1e: drop pci-msi support because of packet corruptionHannes Frederic Sowa
Usage of pci-msi results in corrupted dma packet transfers to the host. Reported-by: rebelyouth <rebelyouth.hacklab@gmail.com> Cc: Huang, Xiong <xiong@qca.qualcomm.com> Tested-by: Christian Sünkenberg <christian.suenkenberg@student.kit.edu> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-19atl1c: restore buffer stateHuang, Xiong
in the previous commit : f1f220ea1dda078, the BUSY state of buffer is wrongly deleted. this patch just restore it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into netDavid S. Miller
Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13atl1c: add error checking for pci_map_single functionsHuang, Xiong
it is reported that code hit DMA-API errors on 3.8-rc6+, (see https://bugzilla.redhat.com/show_bug.cgi?id=908436, and https://bugzilla.redhat.com/show_bug.cgi?id=908550) this patch just adds error handler for pci_map_single and skb_frag_dma_map. Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11drivers/net/ethernet/atheros: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Chris Snook <chris.snook@gmail.com>
2013-01-08remove init of dev->perm_addr in driversJiri Pirko
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: remove unnecessary NET_ADDR_RANDOM "bitclean"Jiri Pirko
NET_ADDR_SET is set in dev_set_mac_address() no need to alter dev->addr_assign_type value in drivers. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03net: set dev->addr_assign_type correctlyJiri Pirko
Not a bitfield, but a plain value. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03net/atheros: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-06sections: fix section conflicts in drivers/netAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-12Merge branch 'pci/stephen-const' into nextBjorn Helgaas
* pci/stephen-const: make drivers with pci error handlers const scsi: make pci error handlers const netdev: make pci_error_handlers const PCI: Make pci_error_handlers const
2012-09-07netdev: make pci_error_handlers constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-08-23atl1c: Use PCI Express Capability accessorsJiang Liu
Use PCI Express Capability access functions to simplify atl1c driver. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-20atl1c: fix issue of io access mode for AR8152 v2.1Cloud Ren
When io access mode is enabled by BOOTROM or BIOS for AR8152 v2.1, the register can't be read/write by memory access mode. Clearing Bit 8 of Register 0x21c could fixed the issue. Signed-off-by: Cloud Ren <cjren@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-16ethernet: Use eth_random_addrJoe Perches
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/batman-adv/bridge_loop_avoidance.c net/batman-adv/bridge_loop_avoidance.h net/batman-adv/soft-interface.c net/mac80211/mlme.c With merge help from Antonio Quartulli (batman-adv) and Stephen Rothwell (drivers/net/usb/qmi_wwan.c). The net/mac80211/mlme.c conflict seemed easy enough, accounting for a conversion to some new tracing macros. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functionsBen Hutchings
Fix incorrect start markers, wrapped summary lines, missing section breaks, incorrect separators, and some name mismatches. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-08atl1c: fix issue of transmit queue 0 timed outCloud Ren
some people report atl1c could cause system hang with following kernel trace info: --------------------------------------- WARNING: at.../net/sched/sch_generic.c:258 dev_watchdog+0x1db/0x1d0() ... NETDEV WATCHDOG: eth0 (atl1c): transmit queue 0 timed out ... --------------------------------------- This is caused by netif_stop_queue calling when cable Link is down. So remove netif_stop_queue, because link_watch will take it over. Signed-off-by: xiong <xiong@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Cloud Ren <cjren@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-06ethernet: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: remove PHY polling from atl1c_change_mtuHuang, Xiong
PHY polling code for FPGA is considered in every MDIO R/W API. no need to add additional code to atl1c_change_mtu. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: David Liu <dwliu@qca.qaulcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: Disable L0S when no cable linkHuang, Xiong
L0S might be unstable if no cable link, only enable it when link up. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: do MAC-reset when PHY link downHuang, Xiong
There may be tx-skbs still pending in HW when PHY link down. Reset MAC will make the DMA engine go to the start point. and release all pending skbs. Note: Reset MAC will clear any interrupt status and mask. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: cancel task when interface closedHuang, Xiong
common_task might be running while close routine is called, wait/cancel it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: enlarge L1 response waiting timerHuang, Xiong
The hardware incorrectly process L0S/L1 entrance if the chipset/root response after specific/shorter timer and cause system hang. Enlarge the timeout value to avoid this issue. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: refine mac address related codeHuang, Xiong
On some platform with EEPROM/OTP existing, the BIOS could overwrite a new MAC address for the NIC. so, the permanent mac address should be from BIOS. the address is restored when driver removing. Voltage raising isn't applicable for l1d. Replace swab32 with htonl for big/little endian platform. related Registers are refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: remove code of closing register writable attributionHuang, Xiong
The Close-action is done by atl1c_reset_pcie, remove it from atl1c_get_permanent_address. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: clear WoL status when reset pcieHuang, Xiong
WoL status is read-clear and should be cleared when in S0 status. putting it in atl1c_reset_pcie is more suitable than in atl1c_get_permanent_address. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-30atl1c: add PHY link event(up/down) patchHuang, Xiong
On some platforms the PHY settings need to change depending on the cable link status to get better stability. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: refine start/enable code for MAC moduleHuang, Xiong
merge TXQ/RXQ/MAC start/enable code to one function as they are started/enabled at the same time, just like stop/disable them in the function of atl1c_stop_mac. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: add function atl1c_power_savingHuang, Xiong
This function is used for suspend of S1/S3/S4 and driver remove. It sets MAC/PHY based on the WoL configuation to get lower power consumption. atl1c_phy_power_saving is renamed to atl1c_phy_to_ps_link, this function is just make PHY enter a link/speed mode to eat less power. REG_MAC_CTRL register is refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: remove PHY reset/init for link down eventHuang, Xiong
it's unnecessary to reset/init phy when link down. Only L1/L2 chip (supported by atlx) need such action. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: update PHY reset related routineHuang, Xiong
Many magic data are re-configured for PHY during its reset operation based on chip type to get better compability and stability. REG_PHY_CTRL register may be configured by BIOS before enter OS. so, the driver can't directly write to it without any Read-Op. this change also affect suspend and phy_disable routines. PHY debug ports and extension registers are refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: remove PHY polling from atl1c_openHuang, Xiong
PHY polling code for FPGA is considered in every MDIO R/W API. no need to add additional code to atl1c_open. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: refine SERDES-clock related codeHuang, Xiong
bit 17/18 of reg1424 must be clear for l2cb 1.x, or it will cause the write-reg operation fail without cable connected. so, please do connect the cable when apply this patch to the driver to make sure these 2bits are cleared by new driver. The revised code is move to al1c_reset_mac. SERDES register definition is refined as well. when do reset MAC, speed/duplex control right should be transferred to software before do PHY auto-neg -- by bit MASTER_CTRL_SPEED_MODE_SW. SERDES register definition is refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: remove PHY contrl in atl1c_reset_pcieHuang, Xiong
atl1c_reset_phy follows atl1c_reset_pcie in the whole driver, so, it's unnecessary to add PHY control code in atl1c_reset_pcie. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: refine phy-register read/write functionHuang, Xiong
phy register is read/write via MDIO control module --- that module will be affected by the hibernate status, to access phy regs in hib stutus, slow frequency clk must be selected. To access phy extension register, the MDIO related registers are refined/updated, a _core function is re-wroted for both regular PHY regs and extension regs. existing PHY r/w function is revised based on the _core. PHY extension registers will be used for the comming patches. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-26atl1c: remove REG_PHY_STATUSHuang, Xiong
this register is used for l1e(dev=1026) l1c/l1d/l2cb don't use it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: remove MDIO_REG_ADDR_MASK in atl1c_mdio_read/writeHuang, Xiong
MDIO_REG_ADDR_MASK is already applied in function atl1c_write_phy_reg and atl1c_read_phy_reg Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: fix WoL(magic) issue for l2cb 1.1Huang, Xiong
l2cb 1.1 hardware has a bug for magic wakeup, the workaround is to add pattern enable. WoL related registers are refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: refine atl1c_pcie_patchHuang, Xiong
bit PCIE_PHYMISC_FORCE_RCV_DET is only for l1c&l2c to fix WoL issue, other chips set bit5 of REG_MASTER_CTRL --- this way could save more power than the former, and the bit should be kept all time. l2cb 1.x has special setting for L0S/L1 l2cb 1.x & l1d 1.x should clear Vendor Message on some platforms, otherwise it will cause the root complex hang. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: refine/update ASPM configurationHuang, Xiong
some platforms(BIOS or OS) may change ASPM configuration in PCI Express Link Control Register directly and dynamically regardless the device driver installation. Checking if ASPM support during the driver init phase by reading PCI Express Link Contrl Register doesn't make sense. This refine/update assume L0S/L1 is defalut enabled as hw->ctrl_flags inited. atl1c_set_aspm will set real configuration based on chip capability to hardware register. atl1c_disable_l0s_l1 and register definition of REG_PM_CTRL are refined as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: clear bit MASTER_CTRL_CLK_SEL_DIS in atl1c_pcie_patchHuang, Xiong
bit MASTER_CTRL_CLK_SEL_DIS could be set before enter suspend clear it after resume to enable pclk(PCIE clock) switch to low frequency(25M) in some circumstances to save power. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: refine reg definition of REG_MASTER_CTRLHuang, Xiong
refine/update register REG_MASTER_CTRL definition according with hardware spec. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: clear PCIE error status in atl1c_reset_pcieHuang, Xiong
clear PCIE error status (error log is write-1-clear). REG_PCIE_UC_SEVERITY is removed as it's a standard pcie register, and using kernle API to access it. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: remove dmar_dly_cnt and dmaw_dly_cntHuang, Xiong
dmar_dly_cnt and dmaw_dly_cnt aren't used by hardware/driver any more. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: update right threshold for TSOHuang, Xiong
atl1c_configure_tx used a wrong value of MAX_TX_OFFLOAD_THRESH(9KB) for TSO threshold. the right value should be 7KB Fast Ethernet controller doesn't support Jumbo frame. Signed-off-by: xiong <xiong@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-19atl1c: add module parameter for l1c_wait_until_idleHuang, Xiong
l1c_wait_until_idle is called for serval modules (TXQ/RXQ/TXMAC/RXMAC). specific moudle have specific idle/busy status in reg REG_IDLE_STATUS. the previous code return wrongly if all modules are in idle status, regardless the 'stop' action is applied on individual module. Refine the reg REG_IDLE_STATUS definition as well. Signed-off-by: xiong <xiong@qca.qualcomm.com> Tested-by: Liu David <dwliu@qca.qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 11:28:22 +0000