summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/arc
AgeCommit message (Collapse)Author
2020-09-25drivers/net/ethernet: add some basic kdoc tagsJesse Brandeburg
A couple of drivers had a "generic documentation" section that would trigger a "can't understand" message from W=1 compiles. Fix by using correct DOC: tags in the generic sections. Fixed Warnings: drivers/net/ethernet/arc/emac_arc.c:4: info: Scanning doc for c drivers/net/ethernet/cadence/macb_pci.c:3: warning: missing initial short description on line: * Cadence GEM PCI wrapper. drivers/net/ethernet/cadence/macb_pci.c:3: info: Scanning doc for Cadence Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24net: arc_emac: Fix memleak in arc_mdio_probeDinghao Liu
When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-28net: arc_emac: fix arc_emac_tx()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-24net/arc: Delete driver versionLeon Romanovsky
Drop constant driver version in favour of global linux kernel. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Timur Tabi <timur@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-04net: of_get_phy_mode: Change API to solve int/unit warningsAndrew Lunn
Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-01net: ethernet: arc: add the missed clk_disable_unprepareChuhong Yuan
The remove misses to disable and unprepare priv->macclk like what is done when probe fails. Add the missed call in remove. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-10net: ethernet: fix similar warning reported by kbuild test robotPetr Štetiar
This patch fixes following (similar) warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. I'm now changing all occurencies of memcpy to ether_addr_copy after the of_get_mac_address call, as it's very likely, that we're going to get similar reports from kbuild test robot in the future. Fixes: a51645f70f63 ("net: ethernet: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: arc_emac: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop ↵Yang Wei
profiles dev_consume_skb_irq() should be called in arc_emac_tx_clean() when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-23net: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-20net: ethernet: arc: Fix a potential memory leak if an optional regulator is ↵Christophe JAILLET
deferred If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again. Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: arc_emac: restart stalled EMACAlexander Kochetkov
Under certain conditions EMAC stop reception of incoming packets and continuously increment R_MISS register instead of saving data into provided buffer. The commit implement workaround for such situation. Then the stall detected EMAC will be restarted. On device the stall looks like the device lost it's dynamic IP address. ifconfig shows that interface error counter rapidly increments. At the same time on the DHCP server we can see continues DHCP-requests from device. In real network stalls happen really rarely. To make them frequent the broadcast storm[1] should be simulated. For simulation it is necessary to make following connections: 1. connect radxarock to 1st port of switch 2. connect some PC to 2nd port of switch 3. connect two other free ports together using standard ethernet cable, in order to make a switching loop. After that, is necessary to make a broadcast storm. For example, running on PC 'ping' to some IP address triggers ARP-request storm. After some time (~10sec), EMAC on rk3188 will stall. Observed and tested on rk3188 radxarock. [1] https://en.wikipedia.org/wiki/Broadcast_radiation Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: arc_emac: fix arc_emac_rx() error pathsAlexander Kochetkov
arc_emac_rx() has some issues found by code review. In case netdev_alloc_skb_ip_align() or dma_map_single() failure rx fifo entry will not be returned to EMAC. In case dma_map_single() failure previously allocated skb became lost to driver. At the same time address of newly allocated skb will not be provided to EMAC. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-13net: ethernet: arc: fix error handling in emac_rockchip_probeBranislav Radocaj
If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Changes since v2 [1]: * Merged with latest code changes Changes since v1: Update made thanks to David's review, much appreciated David. * Improved inconsistent failure handling of clock rate setting * For completeness of usecase, added arc_emac_probe error handling Signed-off-by: Branislav Radocaj <branislav@radocaj.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-07net: ethernet: arc: fix error handling in emac_rockchip_probeBranislav Radocaj
If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Branislav Radocaj <branislav@radocaj.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-03net: arc_emac: Add support for ndo_do_ioctl net_device_ops operationRomain Perier
This operation is required for handling ioctl commands like SIOCGMIIREG, when debugging MDIO registers from userspace. This commit adds support for this operation. Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-21net: arc_emac: switch to phy_start()/phy_stop()Alexander Kochetkov
Currently driver use phy_start_aneg() in arc_emac_open() to bring up PHY. But phy_start() function is more appropriate for this purposes. Besides that it call phy_start_aneg() as part of PHY startup sequence it also can correctly bring up PHY from error and suspended states. So the patch replace phy_start_aneg() to phy_start(). Also the patch add call to phy_stop() to arc_emac_stop() to allow the PHY device to be fully suspended when the interface is unused. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29net: arc_emac: add dependencies on associated arches and compile testPeter Robinson
Add dependencies on the architectures that support these devices and add compile test to ensure ongoing code build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
All conflicts were simple overlapping changes except perhaps for the Thunder driver. That driver has a change_mtu method explicitly for sending a message to the hardware. If that fails it returns an error. Normally a driver doesn't need an ndo_change_mtu method becuase those are usually just range changes, which are now handled generically. But since this extra operation is needed in the Thunder driver, it has to stay. However, if the message send fails we have to restore the original MTU before the change because the entire call chain expects that if an error is thrown by ndo_change_mtu then the MTU did not change. Therefore code is added to nicvf_change_mtu to remember the original MTU, and to restore it upon nicvf_update_hw_max_frs() failue. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: arc_emac: don't pass multicast packets to kernel in non-multicast modeAlexander Kochetkov
The patch disable capturing multicast packets when multicast mode disabled for ethernet ('ifconfig eth0 -multicast'). In that case no multicast packet will be passed to kernel. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: arc_emac: annonce IFF_MULTICAST supportAlexander Kochetkov
Multicast support was implemented by commit 775dd682e2b0ec7 ('arc_emac: implement promiscuous mode and multicast filtering'). It can be enabled explicity using 'ifconfig eth0 multicast'. The patch is needed in order to remove explicit configuration as most devices has multicast mode enabled by default. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19net: arc_emac: use dev_kfree_skb_any instead of dev_kfree_skbWei Yongjun
Replace dev_kfree_skb with dev_kfree_skb_any in arc_emac_tx() which can be called from hard irq context (netpoll) and from other contexts. arc_emac_tx() only frees skbs that it has dropped. This is detected by Coccinelle semantic patch. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06net: arc_emac: mark arc_mdio_reset() staticBaoyou Xie
We get 1 warning when building kernel with W=1: drivers/net/ethernet/arc/emac_mdio.c:107:5: warning: no previous prototype for 'arc_mdio_reset' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-06net: arc_emac: add missing of_node_put() in arc_emac_probe()Wei Yongjun
commit a94efbd7cc45 ("ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandle") added missing of_node_put after calling of_parse_phandle, but missing the devm_ioremap_resource() error handling case. Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Reviewed-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01ethernet: arc: emac_main: add missing of_node_put after calling of_parse_phandlePeter Chen
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: arc: emac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04net: ethernet: arc: emac: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-25net: arc: trivial: Replace comma with a semicolonMarek Vasut
Fix a typo in the driver, replace comma with a semicolon at the end of statement. While using comma is a legal C here and probably does not even generate compiler warning, it was unlikely the intention. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David S. Miller <davem@davemloft.net> Cc: Caesar Wang <wxt@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16net: arc: trivial: cleanup the emac driverCaesar Wang
This patch will make the driver more readability The emac has the error and warnings if you run 'scripts/checkpatch.pl -f --subjective xxx' to check. Let's clean up such trivial details. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexander Kochetkov <al.kochet@gmail.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-16net: arc_emac: support the phy reset for emac driverCaesar Wang
This patch adds to support the emac phy reset. Different boards may require different phy reset duration. Add property phy-reset-duration for emac driver, so that the boards that need a longer reset duration can specify it in their device tree. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Alexander Kochetkov <al.kochet@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: arc_emac: fix sk_buff leakAlexander Kochetkov
EMAC could be disabled, while there is some sb_buff in use. That buffers got lost for linux. In order to reproduce run on device during active ethernet work: ifconfig eth0 down Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: arc_emac: reset txbd_curr and txbd_dirty pointers to zeroAlexander Kochetkov
EMAC reset internal tx ring pointer to zero at statup. txbd_curr and txbd_dirty can be different from zero. That cause ethernet transfer hang (no packets transmitted). In order to reproduce, run on device: ifconfig eth0 down ifconfig eth0 up Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-16net: arc_emac: fix koops caused by sk_buff freeAlexander Kochetkov
There is a race between arc_emac_tx() and arc_emac_tx_clean(). sk_buff got freed by arc_emac_tx_clean() while arc_emac_tx() submitting sk_buff. In order to free sk_buff arc_emac_tx_clean() checks: if ((info & FOR_EMAC) || !txbd->data) break; ... dev_kfree_skb_irq(skb); If condition false, arc_emac_tx_clean() free sk_buff. In order to submit txbd, arc_emac_tx() do: priv->tx_buff[*txbd_curr].skb = skb; ... priv->txbd[*txbd_curr].data = cpu_to_le32(addr); ... ... <== arc_emac_tx_clean() check condition here ... <== (info & FOR_EMAC) is false ... <== !txbd->data is false ... *info = cpu_to_le32(FOR_EMAC | FIRST_OR_LAST_MASK | len); In order to reproduce the situation, run device: # iperf -s run on host: # iperf -t 600 -c <device-ip-addr> [ 28.396284] ------------[ cut here ]------------ [ 28.400912] kernel BUG at .../net/core/skbuff.c:1355! [ 28.414019] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 28.419150] Modules linked in: [ 28.422219] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G B 4.4.0+ #120 [ 28.429516] Hardware name: Rockchip (Device Tree) [ 28.434216] task: c0665070 ti: c0660000 task.ti: c0660000 [ 28.439622] PC is at skb_put+0x10/0x54 [ 28.443381] LR is at arc_emac_poll+0x260/0x474 [ 28.447821] pc : [<c03af580>] lr : [<c028fec4>] psr: a0070113 [ 28.447821] sp : c0661e58 ip : eea68502 fp : ef377000 [ 28.459280] r10: 0000012c r9 : f08b2000 r8 : eeb57100 [ 28.464498] r7 : 00000000 r6 : ef376594 r5 : 00000077 r4 : ef376000 [ 28.471015] r3 : 0030488b r2 : ef13e880 r1 : 000005ee r0 : eeb57100 [ 28.477534] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 28.484658] Control: 10c5387d Table: 8eaf004a DAC: 00000051 [ 28.490396] Process swapper/0 (pid: 0, stack limit = 0xc0660210) [ 28.496393] Stack: (0xc0661e58 to 0xc0662000) [ 28.500745] 1e40: 00000002 00000000 [ 28.508913] 1e60: 00000000 ef376520 00000028 f08b23b8 00000000 ef376520 ef7b6900 c028fc64 [ 28.517082] 1e80: 2f158000 c0661ea8 c0661eb0 0000012c c065e900 c03bdeac ffff95e9 c0662100 [ 28.525250] 1ea0: c0663924 00000028 c0661ea8 c0661ea8 c0661eb0 c0661eb0 0000001e c0660000 [ 28.533417] 1ec0: 40000003 00000008 c0695a00 0000000a c066208c 00000100 c0661ee0 c0027410 [ 28.541584] 1ee0: ef0fb700 2f158000 00200000 ffff95e8 00000004 c0662100 c0662080 00000003 [ 28.549751] 1f00: 00000000 00000000 00000000 c065b45c 0000001e ef005000 c0647a30 00000000 [ 28.557919] 1f20: 00000000 c0027798 00000000 c005cf40 f0802100 c0662ffc c0661f60 f0803100 [ 28.566088] 1f40: c0661fb8 c00093bc c000ffb4 60070013 ffffffff c0661f94 c0661fb8 c00137d4 [ 28.574267] 1f60: 00000001 00000000 00000000 c001ffa0 00000000 c0660000 00000000 c065a364 [ 28.582441] 1f80: c0661fb8 c0647a30 00000000 00000000 00000000 c0661fb0 c000ffb0 c000ffb4 [ 28.590608] 1fa0: 60070013 ffffffff 00000051 00000000 00000000 c005496c c0662400 c061bc40 [ 28.598776] 1fc0: ffffffff ffffffff 00000000 c061b680 00000000 c0647a30 00000000 c0695294 [ 28.606943] 1fe0: c0662488 c0647a2c c066619c 6000406a 413fc090 6000807c 00000000 00000000 [ 28.615127] [<c03af580>] (skb_put) from [<ef376520>] (0xef376520) [ 28.621218] Code: e5902054 e590c090 e3520000 0a000000 (e7f001f2) [ 28.627307] ---[ end trace 4824734e2243fdb6 ]--- [ 34.377068] Internal error: Oops: 17 [#1] SMP ARM [ 34.382854] Modules linked in: [ 34.385947] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.4.0+ #120 [ 34.392219] Hardware name: Rockchip (Device Tree) [ 34.396937] task: ef02d040 ti: ef05c000 task.ti: ef05c000 [ 34.402376] PC is at __dev_kfree_skb_irq+0x4/0x80 [ 34.407121] LR is at arc_emac_poll+0x130/0x474 [ 34.411583] pc : [<c03bb640>] lr : [<c028fd94>] psr: 60030013 [ 34.411583] sp : ef05de68 ip : 0008e83c fp : ef377000 [ 34.423062] r10: c001bec4 r9 : 00000000 r8 : f08b24c8 [ 34.428296] r7 : f08b2400 r6 : 00000075 r5 : 00000019 r4 : ef376000 [ 34.434827] r3 : 00060000 r2 : 00000042 r1 : 00000001 r0 : 00000000 [ 34.441365] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 34.448507] Control: 10c5387d Table: 8f25c04a DAC: 00000051 [ 34.454262] Process ksoftirqd/0 (pid: 3, stack limit = 0xef05c210) [ 34.460449] Stack: (0xef05de68 to 0xef05e000) [ 34.464827] de60: ef376000 c028fd94 00000000 c0669480 c0669480 ef376520 [ 34.473022] de80: 00000028 00000001 00002ae4 ef376520 ef7b6900 c028fc64 2f158000 ef05dec0 [ 34.481215] dea0: ef05dec8 0000012c c065e900 c03bdeac ffff983f c0662100 c0663924 00000028 [ 34.489409] dec0: ef05dec0 ef05dec0 ef05dec8 ef05dec8 ef7b6000 ef05c000 40000003 00000008 [ 34.497600] dee0: c0695a00 0000000a c066208c 00000100 ef05def8 c0027410 ef7b6000 40000000 [ 34.505795] df00: 04208040 ffff983e 00000004 c0662100 c0662080 00000003 ef05c000 ef027340 [ 34.513985] df20: ef05c000 c0666c2c 00000000 00000001 00000002 00000000 00000000 c0027568 [ 34.522176] df40: ef027340 c003ef48 ef027300 00000000 ef027340 c003edd4 00000000 00000000 [ 34.530367] df60: 00000000 c003c37c ffffff7f 00000001 00000000 ef027340 00000000 00030003 [ 34.538559] df80: ef05df80 ef05df80 00000000 00000000 ef05df90 ef05df90 ef05dfac ef027300 [ 34.546750] dfa0: c003c2a4 00000000 00000000 c000f578 00000000 00000000 00000000 00000000 [ 34.554939] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 34.563129] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff dfff7fff [ 34.571360] [<c03bb640>] (__dev_kfree_skb_irq) from [<c028fd94>] (arc_emac_poll+0x130/0x474) [ 34.579840] [<c028fd94>] (arc_emac_poll) from [<c03bdeac>] (net_rx_action+0xdc/0x28c) [ 34.587712] [<c03bdeac>] (net_rx_action) from [<c0027410>] (__do_softirq+0xcc/0x1f8) [ 34.595482] [<c0027410>] (__do_softirq) from [<c0027568>] (run_ksoftirqd+0x2c/0x50) [ 34.603168] [<c0027568>] (run_ksoftirqd) from [<c003ef48>] (smpboot_thread_fn+0x174/0x18c) [ 34.611466] [<c003ef48>] (smpboot_thread_fn) from [<c003c37c>] (kthread+0xd8/0xec) [ 34.619075] [<c003c37c>] (kthread) from [<c000f578>] (ret_from_fork+0x14/0x3c) [ 34.626317] Code: e8bd8010 e3a00000 e12fff1e e92d4010 (e59030a4) [ 34.632572] ---[ end trace cca5a3d86a82249a ]--- Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: ethernet: arc: Add support emac for RK3036Xing Zheng
The RK3036's GRFs offset are different with RK3066/RK3188, and need to set mac TX/RX clock before probe emac. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: ethernet: arc: Keep emac compatibility for more Rockchip SoCsXing Zheng
On the RK3066/RK3188, there was fixed GRF offset configuration to set emac and fixed DIV2 mac TX/RX clock. So, we need to easily set and fit to other SoCs (RK3036) which maybe have different GRF offset, and need adjust mac TX/RX clock. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-10net: ethernet: arc: Probe emac after set RMII clockXing Zheng
After enter arc_emac_probe, emac will get_phy_id, phy_poll_reset and other connecting PHY via mdiobus_read, so we need to set correct ref clock rate for emac before probe emac. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-21net: arc: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23ethernet: arc: ARC_EMAC and EMAC_ROCKCHIP should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `arc_emac_tx_clean': emac_main.c:(.text+0x2decde): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `arc_emac_rx': emac_main.c:(.text+0x2dee1c): undefined reference to `dma_unmap_single' emac_main.c:(.text+0x2dee72): undefined reference to `dma_map_single' emac_main.c:(.text+0x2dee7e): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `arc_emac_probe': (.text+0x2df2ee): undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `arc_emac_open': emac_main.c:(.text+0x2df6d8): undefined reference to `dma_map_single' emac_main.c:(.text+0x2df6e4): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `arc_emac_tx': emac_main.c:(.text+0x2df9e4): undefined reference to `dma_map_single' emac_main.c:(.text+0x2df9f0): undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12net: arc_emac: prevent reuse of unreclaimed tx descriptorsBeniamino Galvani
This patch changes the logic in tx path to ensure that tx descriptors are reused for transmission only after they have been reclaimed by arc_emac_tx_clean(). Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-12net: arc_emac: enable tx interruptsBeniamino Galvani
In the current implementation the cleaning of tx ring is done by the NAPI poll handler, which is scheduled after rx interrupts. Thus, in absence of received packets the reclaim of used tx buffers is never executed, blocking further transmission. This can be easily reproduced starting the transmission of a UDP flow with iperf, which blocks almost immediately because skbs are not returned to the stack and the socket send buffer becomes full. The patch enables tx interrupts so that the tx reclaim is scheduled after completed transmissions. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-05 03:06:15 +0000