summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)Author
2018-10-10net: dsa: bcm_sf2: Call setup during switch resumeFlorian Fainelli
There is no reason to open code what the switch setup function does, in fact, because we just issued a switch reset, we would make all the register get their default values, including for instance, having unused port be enabled again and wasting power and leading to an inappropriate switch core clock being selected. Fixes: 8cfa94984c9c ("net: dsa: bcm_sf2: add suspend/resume callbacks") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10net: dsa: bcm_sf2: Fix unbind orderingFlorian Fainelli
The order in which we release resources is unfortunately leading to bus errors while dismantling the port. This is because we set priv->wol_ports_mask to 0 to tell bcm_sf2_sw_suspend() that it is now permissible to clock gate the switch. Later on, when dsa_slave_destroy() comes in from dsa_unregister_switch() and calls dsa_switch_ops::port_disable, we perform the same dismantling again, and this time we hit registers that are clock gated. Make sure that dsa_unregister_switch() is the first thing that happens, which takes care of releasing all user visible resources, then proceed with clock gating hardware. We still need to set priv->wol_ports_mask to 0 to make sure that an enabled port properly gets disabled in case it was previously used as part of Wake-on-LAN. Fixes: d9338023fb8e ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-10-04net: dsa: b53: Keep CPU port as tagged in all VLANsFlorian Fainelli
Commit c499696e7901 ("net: dsa: b53: Stop using dev->cpu_port incorrectly") was a bit too trigger happy in removing the CPU port from the VLAN membership because we rely on DSA to program the CPU port VLAN, which it does, except it does not bother itself with tagged/untagged and just usese untagged. Having the CPU port "follow" the user ports tagged/untagged is not great and does not allow for properly differentiating, so keep the CPU port tagged in all VLANs. Reported-by: Gerhard Wiesinger <lists@wiesinger.com> Fixes: c499696e7901 ("net: dsa: b53: Stop using dev->cpu_port incorrectly") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add helper for advertise to lcl valueAndrew Lunn
Add a helper to convert the local advertising to an LCL capabilities, which is then used to resolve pause flow control settings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28net: dsa: b53: Fix build with B53_SRAB enabled and B53_SERDES=mArnd Bergmann
When B53_SERDES is a loadable module, a built-in srab driver still cannot reach it, so the previous fix is incomplete: b53_srab.c:(.text+0x3f4): undefined reference to `b53_serdes_init' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe64): undefined reference to `b53_serdes_link_state' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe74): undefined reference to `b53_serdes_link_set' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xe88): undefined reference to `b53_serdes_an_restart' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea0): undefined reference to `b53_serdes_phylink_validate' drivers/net/dsa/b53/b53_srab.o:(.rodata+0xea4): undefined reference to `b53_serdes_config' Add a Kconfig dependency that forces srab to also be a module in this case, but allow it to be built-in when serdes is disabled or built-in. Fixes: 7a8c7f5c30f9 ("net: dsa: b53: Fix build with B53_SRAB enabled and not B53_SERDES") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25net: dsa: lantiq_gswip: Depend on HAS_IOMEMHauke Mehrtens
The driver uses devm_ioremap_resource() which is only available when CONFIG_HAS_IOMEM is set, make the driver depend on this config option. User mode Linux does not have CONFIG_HAS_IOMEM set and the driver was failing on this architecture. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: dsa: b53: Also include SGMII for mac_config and mac_link_stateFlorian Fainelli
In both 802.3z and SGMII modes we need to configure the MAC accordingly to flip between Fiber and SGMII modes, and we need to read the MAC status from the SGMII in-band control word. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: dsa: b53: Fix B53_SERDES_DIGITAL_CONTROL offsetFlorian Fainelli
Maths went wrong, to get 0x20, we need to do 0x1e + (x) * 2, not 0x18, fix that offset so we access the correct registers. This would make us not access the correct SerDes Digital control words, status would be fine and so we would not be correctly flipping between Fiber and SGMII modes resulting in incorrect status words being pulled into the SerDes digital status register. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21net: dsa: b53: Don't assign autonegotiation enabledFlorian Fainelli
PHYLINK takes care of filing the right information into state->an_enabled, get rid of the read from the SerDes's BMCR register. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two new tls tests added in parallel in both net and net-next. Used Stephen Rothwell's linux-next resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: remove redundant null pointer check before of_node_putzhong jiang
of_node_put has taken the null pointer check into account. So it is safe to remove the duplicated check before of_node_put. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: lantiq_gswip: Minor code style improvementsHauke Mehrtens
Use one code block when returning because the interface type is unsupported and also check if some unsupported port gets configured. In addition fix a double the and use dsa_is_cpu_port() instated of manually getting the CPU port. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: gswip: Fix copy-paste error in gswip_gphy_fw_probe()Wei Yongjun
The return value from of_reset_control_array_get_exclusive() is not checked correctly. The test is done against a wrong variable. This patch fix it. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: gswip: Fix return value check in gswip_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: dsa: mv88e6xxx: Fix ATU Miss ViolationAndrew Lunn
Fix a cut/paste error and a typo which results in ATU miss violations not being reported. Fixes: 0977644c5005 ("net: dsa: mv88e6xxx: Decode ATU problem interrupt") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13net: dsa: b53: Do not fail when IRQ are not initializedFlorian Fainelli
When the Device Tree is not providing the per-port interrupts, do not fail during b53_srab_irq_enable() but instead bail out gracefully. The SRAB driver is used on the BCM5301X (Northstar) platforms which do not yet have the SRAB interrupts wired up. Fixes: 16994374a6fc ("net: dsa: b53: Make SRAB driver manage port interrupts") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13net: dsa: Add Lantiq / Intel DSA driver for vrx200Hauke Mehrtens
This adds the DSA driver for the GSWIP Switch found in the VRX200 SoC. This switch is integrated in the DSL SoC, this SoC uses a GSWIP version 2.1, there are other SoCs using different versions of this IP block, but this driver was only tested with the version found in the VRX200. Currently only the basic features are implemented which will forward all packages to the CPU and let the CPU do the forwarding. The hardware also support Layer 2 offloading which is not yet implemented in this driver. The GPHY FW loaded is now done by this driver and not any more by the separate driver in drivers/soc/lantiq/gphy.c, I will remove this driver is a separate patch. to make use of the GPHY this switch driver is needed anyway. Other SoCs have more embedded GPHYs so this driver should support a variable number of GPHYs. After the firmware was loaded the GPHY can be probed on the MDIO bus and it behaves like an external GPHY, without the firmware it can not be probed on the MDIO bus. The clock names in the sysctrl.c file have to be changed because the clocks are now used by a different driver. This should be cleaned up and a real common clock driver should provide the clocks instead. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: dsa: mv88e6xxx: Make sure to configure ports with external PHYsMarek Vasut
The MV88E6xxx can have external PHYs attached to certain ports and those PHYs could even be on different MDIO bus than the one within the switch. This patch makes sure that ports with such PHYs are configured correctly according to the information provided by the PHY. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: dsa: b53: Only call b53_port_event() for SGMII portsFlorian Fainelli
Built-in PHY ports are still being polled, avoid generating spurious and duplicate events which the PHY library resolves through polling anyways. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: dsa: b53: Uninitialized variable in b53_adjust_link()Dan Carpenter
The "pause" variable is only initialized on BCM5301x. Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07net: dsa: b53: Fix build with B53_SRAB enabled and not B53_SERDESFlorian Fainelli
In case B53_SRAB is enabled, but not B53_SERDES, we can get the following linking error: ERROR: "b53_serdes_init" [drivers/net/dsa/b53/b53_srab.ko] undefined! We also need to ifdef the body of b53_srab_serdes_map_lane() since it would not be used when B53_SERDES is disabled and that would produce a warning. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add SerDes supportFlorian Fainelli
Add support for the Northstar Plus SerDes which is accessed through a special page of the switch. Since this is something that most people probably will not want to use, make it a configurable option with a default on ARCH_BCM_NSP where it is the most useful currently. The SerDes supports both SGMII and 1000baseX modes for both lanes, and 2500baseX for one of the lanes, and is internally looking like a seemingly standard MII PHY, except for the few bits that got repurposed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add PHYLINK supportFlorian Fainelli
Add support for PHYLINK, things are reasonably straight forward since we do not yet support SerDes interfaces, that leaves us with just MLO_AN_PHY and MLO_AN_FIXED to deal with. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add helper to set link parametersFlorian Fainelli
Extract the logic from b53_adjust_link() responsible for overriding a given port's link, speed, duplex and pause settings and make two helper functions to set the port's configuration and the port's link settings. We will make use of both, as separate functions while adding PHYLINK support next. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Make SRAB driver manage port interruptsFlorian Fainelli
Update the SRAB driver to manage per-port interrupts. Since we cannot sleep during b53_io_ops, schedule a workqueue whenever we get a port specific interrupt. We will later make use of this to call back into PHYLINK when there is e.g: a link state change. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add ability to enable/disable port interruptsFlorian Fainelli
Some switches expose individual interrupt line(s) for port specific event(s), allow configuring these interrupts at an appropriate time during port_enable/disable callbacks where all port specific resources are known to be set-up and ready for use. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Add SERDES phydev_link_change for 6352Andrew Lunn
The 6352 family has one SERDES interface, which can be used by either port 4 or port 5. Add interrupt support for the SERDES interface, and report when the link status changes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Fix writing to a PHY page.Andrew Lunn
After changing to the needed page, actually write the value to the register! Fixes: 09cb7dfd3f14 ("net: dsa: mv88e6xxx: describe PHY page and SerDes") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: dsa: b53: Provide sensible defaultsFlorian Fainelli
The SRAB driver is the default way to communicate with the integrated switch on iProc platforms and the MMAP driver is the way to communicate with the integrated switch on DSL BCM63xx and CM BCM33xx. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net: dsa: mv88e6xxx: Share main switch IRQMarek Behún
On some boards the interrupt can be shared between multiple devices. For example on Turris Mox the interrupt is shared between all switches. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-16net: dsa: add support for ksz9897 ethernet switchLad, Prabhakar
ksz9477 is superset of ksz9xx series, driver just works out of the box for ksz9897 chip with this patch. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: dsa: mv88e6xxx: missing unlock on error pathDan Carpenter
We added a new error path, but we need to drop the lock before we return. Fixes: 2d2e1dd29962 ("net: dsa: mv88e6xxx: Cache the port cmode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: dsa: mv88e6xxx: bitwise vs logical bugDan Carpenter
We are trying to test if these flags are set but there are some && vs & typos. Fixes: efd1ba6af93f ("net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: rtl8366rb: Support port 4 (WAN)Linus Walleij
The totally undocumented IO mode needs to be set to enumerator 0 to enable port 4 also known as WAN in most configurations, for ordinary traffic. The 3 bits in the register come up as 010 after reset, but need to be set to 000. The Realtek source code contains a name for these bits, but no explanation of what the 8 different IO modes may be. Set it to zero for the time being and drop a comment so people know what is going on if they run into trouble. This "mode zero" works fine with the D-Link DIR-685 with RTL8366RB. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Re-setup interrupts on CMODE change.Andrew Lunn
When a port changes CMODE, the SERDES interface being used can change. Disable interrupts for the old SERDES interface, and enable interrupts on the new. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add SERDES phydev_mac_change up for 6390Andrew Lunn
phylink wants to know when the MAC layers notices a change in the link. For the 6390 family, this is a change in the SERDES state. Add interrupt support for the SERDES interface used to implement SGMII/1000Base-X/2500Base-X. This is currently limited to ports 9 and 10. Support for the 10G SERDES and other ports will be added later, building on this basic framework. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: link mv88e6xxx_port to mv88e6xxx_chipAndrew Lunn
An up coming change will register interrupts for individual switch ports, using the mv88e6xxx_port as the interrupt context information. Add members to the mv88e6xxx_port structure so we can link it back to the mv88e6xxx_chip member the port belongs to and the port number of the port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Power on/off SERDES on cmode changeAndrew Lunn
The 6390 family has a number of SERDES interfaces per port. When the cmode changes, eg 1000Base-X to XAUI, the SERDES interface in use will also change. Power down the old SERDES interface and power up the new SERDES interface. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Cache the port cmodeAndrew Lunn
The ports CMODE indicates the type of link between the MAC and the PHY. It is used often in the SERDES code. Rather than read it each time, cache its value. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 2500Base-X uses the 1000Base-X SERDESAndrew Lunn
The 6390 has three different SERDES interface types. 2500Base-X is implemented by the SGMII/1000Base-X SERDES. So power on/off the correct SERDES. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add serdes register read/write helperAndrew Lunn
Add a helper for accessing SERDES registers of the 6390 family. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Rename sgmii/10g power functionsAndrew Lunn
There is a need to add more functions manipulating the SERDES interfaces. Cleanup the namespace. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: 6390 vs 6390X SERDES supportAndrew Lunn
The 6390 has two SERDES interfaces, used by ports 9 and 10. The 6390X has eight SERDES interfaces. These allow ports 9 and 10 to do 10G. Or if lower speeds are used, some of the SERDES interfaces can be used by ports 2-8 for 1000Base-X. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Refactor SERDES lane codeAndrew Lunn
The 6390 family has 8 SERDES lanes. What ports use these lanes depends on how ports 9 and 10 are configured. If 9 and 10 does not make use of a line, one of the lower ports can use it. Add a function to return the lane a port is using, if any, and simplify the code to power up/down the lane. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: add phylink supportRussell King
Add rudimentary phylink support to mv88e6xxx. TODO: - needs to call phylink_mac_change() when the port link comes up/goes down. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: dsa: mv88e6xxx: Add support to enabling pauseAndrew Lunn
The 6185 can enable/disable 802.3z pause be setting the MyPause bit in the port status register. Add an op to support this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: dsa: b53: Add support for Broadcom Omega SoC internal switchArun Parameswaran
Add support for the Broadcom Omega SoC internal ethernet switch to the b53 srab driver in the DSA framework. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07net: dsa: bcm_sf2: Propagate ethtool::rxnfc to CPU portFlorian Fainelli
Allow propagating ethtool::rxnfc programming to the CPU/management port such that it is possible for such a CPU to perform e.g: Wake-on-LAN using filters configured by the switch. We need a tiny bit of cooperation between the switch drivers which is able to do the full flow matching, whereas the CPU/management port might not. The CPU/management driver needs to return -EOPNOTSUPP to indicate an non critical error, any other error code otherwise. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-03net: dsa: bcm_sf2: Disable learning while in WoLFlorian Fainelli
When we are in Wake-on-LAN, we operate with the host sofware not running a network stack, so we want to the switch to flood packets in order to cause a system wake-up when matching specific filters (unicast or multicast). This was not necessary before since we supported Magic Packet which are targeting a broadcast MAC address which the switch already floods. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 17:57:07 +0000