summaryrefslogtreecommitdiff
path: root/drivers/net/can
AgeCommit message (Collapse)Author
2012-06-07can: c_can: Add support for Bosch D_CAN controllerAnilKumar Ch
This patch adds the support for D_CAN controller driver to the existing C_CAN driver. Bosch D_CAN controller is a full-CAN implementation which is compliant to CAN protocol version 2.0 part A and B. Bosch D_CAN user manual can be obtained from: http://www.semiconductors.bosch.de/media/en/pdf/ ipmodules_1/can/d_can_users_manual_111.pdf A new array is added for accessing the d_can registers, according to d_can controller register space. Current D_CAN implementation has following limitations, this is done to avoid large changes to the C_CAN driver. 1. Message objects are limited to 32, 16 for RX and 16 for TX. C_CAN IP supports upto 32 message objects but in case of D_CAN we can configure upto 128 message objects. 2. Using two 16bit reads/writes for accessing the 32bit D_CAN registers. 3. These patches have been tested on little endian machine, there might be some hidden endian-related issues due to the nature of the accesses (32-bit registers accessed as 2 16-bit registers). However, I do not have a big-endian D_CAN implementation to confirm. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-07can: c_can: Move overlay structure to array with offset as indexAnilKumar Ch
c_can uses overlay structure for accessing c_can module registers. With this kind of implementation it is difficult to add one more ip which is similar to c_can in functionality but different register offsets. This patch changes the overlay structure implementation to an array with register offset as index. This way we can overcome the above limitation. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-06-06Merge branch 'master' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
2012-06-06drivers: net: Remove casts to same typeJoe Perches
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-03can: cc770: Fix likely misuse of | for &Joe Perches
Using | with a constant is always true. Likely this should have be &. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03can: c_can: fix race condition in c_can_open()AnilKumar Ch
Fix the issue of C_CAN interrupts getting disabled forever when canconfig utility is used multiple times. According to NAPI usage we disable all the hardware interrupts in ISR and re-enable them in poll(). Current implementation calls napi_enable() after hardware interrupts are enabled. If we get any interrupts between these two steps then we do not process those interrupts because napi is not enabled. Mostly these interrupts come because of STATUS is not 0x7 or ERROR interrupts. If napi_enable() happens before HW interrupts enabled then c_can_poll() function will be called eventual re-enabling. This patch moves the napi_enable() call before interrupts enabled. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03can: c_can: fix an interrupt thrash issue with c_can driverAnilKumar Ch
This patch fixes an interrupt thrash issue with c_can driver. In c_can_isr() function interrupts are disabled and enabled only in c_can_poll() function. c_can_isr() & c_can_poll() both read the irqstatus flag. However, irqstatus is always read as 0 in c_can_poll() because all C_CAN interrupts are disabled in c_can_isr(). This causes all interrupts to be re-enabled in c_can_poll() which in turn causes another interrupt since the event is not really handled. This keeps happening causing a flood of interrupts. To fix this, read the irqstatus register in isr and use the same cached value in the poll function. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-06-03can: c_can: fix "BUG! echo_skb is occupied!" during transmitAnilKumar Ch
This patch fixes an issue with transmit routine, which causes "can_put_echo_skb: BUG! echo_skb is occupied!" message when using "cansequence -p" on D_CAN controller. In c_can driver, while transmitting packets tx_echo flag holds the no of can frames put for transmission into the hardware. As the comment above c_can_do_tx() indicates, if we find any packet which is not transmitted then we should stop looking for more. In the current implementation this is not taken care of causing the said message. Also, fix the condition used to find if the packet is transmitted or not. Current code skips the first tx message object and ends up checking one extra invalid object. While at it, fix the comment on top of c_can_do_tx() to use the terminology "packet" instead of "package" since it is more standard. Cc: stable@kernel.org # 2.6.39+ Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-23can: flexcan: add PM supportEric Bénard
tested on an i.MX257 Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-12can: flexcan: adopt pinctrl supportShawn Guo
Cc: linux-can@vger.kernel.org Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-18Fix "the the" in various KconfigMasanari Iida
Fix typo "the the" in various Kconfig. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-04-16can: usb: PCAN-USB Pro: fix mem leaks in pcan_usb_pro_init() on error pathsJesper Juhl
If either call to pcan_usb_pro_send_req() in drivers/net/can/usb/peak_usb/pcan_usb_pro.c::pcan_usb_pro_init() fails, we'll leak the memory we allocated to 'usb_if' with kzalloc() when the 'usb_if' variable goes out of scope without having been assigned to anything as we 'return err;'. Fix this by adding appropriate kfree(usb_if) calls to the error paths. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-04-16net/can: use module_pci_driverAxel Lin
This patch converts the drivers in drivers/net/can/* to use module_pci_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-can@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-02can: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-07can: peak_usb: PCAN-USB specific part: fix little endian usageStephane Grosjean
That patch fixes some bad usage of two little-endian variables, which lead to some warning/error when building the peak_usb driver. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-03-03can: usb: PEAK-System Technik PCAN-USB Pro specific partStephane Grosjean
This patch adds the specific part which handles the PCAN-USB Pro adapter from PEAK-System Technik (http://www.peak-system.com). The PCAN-USB Pro adapter is a dual-channel USB 2.0 adapter compliant with CAN specifications Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-03-03can: usb: PEAK-System Technik PCAN-USB specific partStephane Grosjean
This patch adds the specific part which handles the PCAN-USB adapter from PEAK-System Technik (http://www.peak-system.com). The PCAN-USB adapter is a sja1000 based, mono-channel USB 1.1 adapter compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID). Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-03-03can: usb: PEAK-System Technik USB adapters driver coreStephane Grosjean
This patch adds the core of the peak_usb driver which handles PEAK-System Technik PCAN USB adapters. It defines the parts which are common to the PCAN-USB adapters: can network interfaces management, network-to/from-usb data path interface, timestamps management... Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-03-03can: sja1000: add support for PEAK-System PCMCIA cardStephane Grosjean
This patch adds support to the PCAN-PC Card PCMCIA card from PEAK-System Technik (www.peak-system.com). This card is a CAN interface for the PC Card slot. It is available as a single or dual-channel version. Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-03-03can: peak_pci: add support of some new PEAK-System PCI cardsStephane Grosjean
This patch adds the support of some new PEAK-System PCI cards in the CAN network sub-system. These are: PCAN-PCIeC (PCI-ExpressCard) PCAN-mminiPCI (mini-PCI) PCAN-PCI (PCI next-gen) This patch also adds the control of the blinking leds of the PCAN-PCIeC. Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-03-03can: cc770: linux/can/dev.h included twiceDanny Kukawka
drivers/net/can/cc770/cc770.c included 'linux/can/dev.h' twice, remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/sfc/rx.c Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change the rx_buf->is_page boolean into a set of u16 flags, and another to adjust how ->ip_summed is initialized. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20can: sja1000: fix isr hang when hw is unplugged under loadOliver Hartkopp
In the case of hotplug enabled devices (PCMCIA/PCIeC) the removal of the hardware can cause an infinite loop in the common sja1000 isr. Use the already retrieved status register to indicate a possible hardware removal and double check by reading the mode register in sja1000_is_absent. Cc: stable@kernel.org [3.2+] Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-04Merge branch 'master' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Conflicts: drivers/net/can/usb/ems_usb.c Minor dev_warn --> netdev_warn conversion conflicts.
2012-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-02-03can: replace the dev_dbg/info/err/... with the new netdev_xxx macrosWolfgang Grandegger
Cc: uclinux-dist-devel@blackfin.uclinux.org Cc: Anant Gole <anantgole@ti.com> Cc: Chris Elston <celston@katalix.com> Cc: Sebastian Haas <haas@ems-wuensche.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Sebastian Haas <dev@sebastianhaas.info> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: bfin_can/ti_hecc/mscan: add missing do_get_berr_counter callbackWolfgang Grandegger
Cc: Anant Gole <anantgole@ti.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: Kconfig: add more information about Intel EG20T PCH CAN controllerTomoya MORINAGA
Current menu description, not easy to understand what the description means. So, add information about the device. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> [mkl: Added space before opening parentheses in Kconfig. Make commit message more descriptive.] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: pch_can: Change company name OKI SEMICONDUCTOR to LAPIS SemiconductorTomoya MORINAGA
On October 1 in 2011, OKI SEMICONDUCTOR Co., Ltd. changed the company name in to LAPIS Semiconductor Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: plx_pci: add support for IXXAT PCI cardsJames Kime
This patch adds support for IXXAT passive CAN controllers Signed-off-by: James Kime <kime@ixxat.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: ems_usb: Improved memory handling on ems_usb_startSebastian Haas
Do not return from ems_usb_start if allocation fails. If not all URBs could be allocated use the one already submitted. Signed-off-by: Sebastian Haas <dev@sebastianhaas.info> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: flexcan: Fix CAN_RAW_RECV_OWN_MSGS and CAN_RAW_LOOPBACKReuben Dowle
Currently the flexcan driver uses hardware local echo. This blindly echos all transmitted frames to all receiving sockets, regardless what CAN_RAW_RECV_OWN_MSGS and CAN_RAW_LOOPBACK are set to. This patch now submits transmitted frames to be echoed in the transmit complete interrupt, preserving the reference to the sending socket. This allows the can protocol to correctly handle the local echo. Further this patch moves tx_bytes statistic accounting into the tx_complete handler. Signed-off-by: Reuben Dowle <reuben.dowle@navico.com> [mkl: move tx_bytes accounting into tx_complete handler; cleanups] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: dev: let can_get_echo_skb() return dlc of CAN frameMarc Kleine-Budde
can_get_echo_skb() is usually called in the TX complete handler. The stats->tx_packets and stats->tx_bytes should be updated there, too. This patch simplifies to figure out the size of the sent CAN frame. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: ems_usb: Removed double netif_device_detachSebastian Haas
netif_device_attched is called twice when ems_usb_start fails with -ENODEV Signed-off-by: Sebastian Haas <dev@sebastianhaas.info> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: peak_pci: Fix the way channels are linked togetherStephane Grosjean
Change the way channels objects are linked together by peak_pci_probe() avoiding any kernel oops when driver is removed. Side effect is that the list is now browsed from last to first channel. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: ems_usb: Removed double netif_device_detachSebastian Haas
netif_device_attched is called twice when ems_usb_start fails with -ENODEV Signed-off-by: Sebastian Haas <dev@sebastianhaas.info> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: pch_can: fix error passive level testXi Wang
The test (((errc & PCH_REC) >> 8) > 127) would always be false because the receive error counter ((errc & PCH_REC) >> 8) is at most 127, where PCH_REC is defined as 0x7f00. To test whether the receive error counter has reached the error passive level, the RP bit (15) should be used. Signed-off-by: Xi Wang <xi.wang@gmail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: ti_hecc: use netif_rx in the interruptWolfgang Grandegger
This patch fixes locking problems by using netif_rx() instead of netif_receive_skb() in ti_hecc_error() called from the interrupt context. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: cc770: Fix indirect access deadlock on ISA cardsWolfgang Zarre
This fix avoids a deadlock if an interrupt occurs during consecutive port operations on ISA cards utilising indirect access via address and data port. Tested on a B&R ISA card. Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Wolfgang Zarre <lkdev@essax.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: cc770: store echo skb before starting the transferWolfgang Grandegger
On slow systems and high CAN bitrates, the error message "can_put_echo_skb: BUG! echo_skb is occupied!" did show up because can_put_echo_skb() was called after starting the transfer. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-02-03can: flexcan: fix irq flooding by clearing all interrupt sourcesWolfgang Grandegger
As pointed out by Reuben Dowle and Lothar Waßmann, the TWRN_INT, RWRN_INT, BOFF_INT interrupt sources need to be cleared as well to avoid interrupt flooding, at least for the Flexcan on i.MX28 SOCs. Furthermore, the interrupts are only cleared, if really one of those interrupt sources are pending (which is not the case for rx and tx done). Cc: Reuben Dowle <Reuben.Dowle@navico.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-01-31drivers/net: Remove unnecessary k.alloc/v.alloc OOM messagesJoe Perches
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-30drivers/net: fix up stale paths from driver reorgPaul Gortmaker
The reorganization of the driver layout in drivers/net left behind some stale paths in comments and in Kconfig help text. Bring them up to date. No actual change to any code takes place here. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-09Merge tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
clock management changes for i.MX Another simple series related to clock management, this time only for imx. * tag 'clk' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: select HAVE_CLK_PREPARE for clock clk: add config option HAVE_CLK_PREPARE into Kconfig ASoC: mxs-saif: convert to clk_prepare/clk_unprepare video: mxsfb: convert to clk_prepare/clk_unprepare serial: mxs-auart: convert to clk_prepare/clk_unprepare net: flexcan: convert to clk_prepare/clk_unprepare mtd: gpmi-lib: convert to clk_prepare/clk_unprepare mmc: mxs-mmc: convert to clk_prepare/clk_unprepare dma: mxs-dma: convert to clk_prepare/clk_unprepare net: fec: add clk_prepare/clk_unprepare ARM: mxs: convert platform code to clk_prepare/clk_unprepare clk: add helper functions clk_prepare_enable and clk_disable_unprepare Fix up trivial conflicts in drivers/net/ethernet/freescale/fec.c due to commit 0ebafefcaa7a ("net: fec: add clk_prepare/clk_unprepare") clashing trivially with commit e163cc97f9ac ("net/fec: fix the .remove code").
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 20:06:11 +0000