summaryrefslogtreecommitdiff
path: root/drivers/net/b44.c
AgeCommit message (Collapse)Author
2010-02-22net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22b44: use netdev_alloc_skb instead of dev_alloc_skbHauke Mehrtens
The conversion in bf0dcbd929faf036f1a4f2918090344d0e249cf5 missed the new allocation in b44_rx. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22b44: Set PHY address to NO_PHY if reset fails.Hauke Mehrtens
Do a PHY reset to test if there is an active phy and set the PHY address to B44_PHY_ADDR_NO_PHY in case of an not active phy. This is needed for the Linksys WRTSL54GS and Asus WL-500W. This patch was used in OpenWRT for a long time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17drivers/net/b44.c: Use (pr|netdev|netif)_<level> macro helpersJoe Perches
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt Remove #define PFX Use pr_<level> Use netdev_<level> Use netif_<level> Remove periods from formats Coalesce long formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-17b44: Ratelimit timeout error message.Jochen Friedrich
Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-08b44 WOL setup: one-bit-off stack corruption kernel panic fixStanislav Brabec
About 50% of shutdowns of b44 Ethernet adapter ends by kernel panic with kernels compiled with stack-protector. Checking b44_magic_pattern() return values, one call of b44_magic_pattern() returns 127. It means, that set_bit(128, pmask) was called on line 1509. It means that bit 0 of 17th byte of pmask was overwritten. But pmask has only 16 bytes. Stack corruption happens. It seems that set_bit() on line 1509 always writes one bit off. The fix does not only solve the stack corruption, but also makes Wake On LAN working on my onboard B44 on Asus A7V-333X mainboard. It seems that this problem affects all kernel versions since commit 725ad800 ([PATCH] b44: add wol for old nic) on 2006-06-20. Signed-off-by: Stanislav Brabec <sbrabec@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-30b44: Fix wedge when using netconsole.David S. Miller
Fixes kernel bugzilla #14691 Due to the way netpoll works, it is perfectly legal to see NAPI already scheduled when new device events are pending in b44_interrupt(). So logging a message about it is wrong and in fact harmful. Based upon a patch by Andreas Mohr. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-16b44: the poll handler b44_poll must not enable IRQ unconditionallyDongdong Deng
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when it is available. As netconsole can be used from almost any context, IRQ must not be enabled blindly in the NAPI handler of the driver which supports netpoll. Call trace: netpoll_send_skb() { local_irq_save(flags) -> netpoll_poll() -> poll_napi() -> poll_one_napi() -> napi->poll() -> b44_poll() local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-09b44/b43/b43legacy: Fix switch warnings introduced by SSB-SDIOMichael Buesch
This fixes some gcc warnings for switch statements. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-02Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/yellowfin.c
2009-09-01netdev: convert bulk of drivers to netdev_tx_tStephen Hemminger
In a couple of cases collapse some extra code like: int retval = NETDEV_TX_OK; ... return retval; into return NETDEV_TX_OK; Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of spin_lock_irq() and spin_unlock_irq() in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use spin_lock_irqsave() and spin_unlock_restore() to prevent the irqs from getting enabled while in netpoll_send_skb(). Call trace: netpoll_send_skb() { -> local_irq_save(flags) ---> dev->ndo_start_xmit(skb, dev) ---> spin_lock_irq() ---> spin_unlock_irq() *******here would enable the interrupt. ... -> local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02drivers/net: Use DIV_ROUND_CLOSESTJulia Lawall
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20b44: strncpy does not null terminate stringroel kluin
strlcpy() will always null terminate the string. Also use the sizeof(version) to strlcopy() the version string. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-27net: use netdev stats in b44, sundance, via-rhine and via-velocityEric Dumazet
Use struct net_device_stats provided in struct net_device instead of private ones. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)Yang Hongyang
Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06b44: Use kernel DMA addresses for the kernel DMA APIMichael Buesch
We must not use the device DMA addresses for the kernel DMA API, because device DMA addresses have an additional offset added for the SSB translation. Use the original dma_addr_t for the sync operation. Cc: stable@kernel.org Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-04b44: Fix sizes passed to b44_sync_dma_desc_for_{device,cpu}()Michael Buesch
> > ------------[ cut here ]------------ > > WARNING: at lib/dma-debug.c:539 check_sync+0xe9/0x341() (Not tainted) > > Hardware name: HP Compaq nx6110 (PY501EA#AB9) > > b44 0000:02:0e.0: DMA-API: device driver tries to sync DMA memory it has not > > allocated [device address=0x0000000075941040] [size=1566 bytes] > > Modules linked in: llc bnep l2cap bluetooth autofs4 lm90 hwmon i2c_i801 sunrpc > > ipv6 cpufreq_ondemand acpi_cpufreq uinput snd_intel8x0m snd_intel8x0 > > snd_ac97_codec snd_seq_dummy ac97_bus snd_seq_oss snd_seq_midi_event snd_seq > > snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm b44 ssb firewire_ohci > > snd_timer ipw2200 iTCO_wdt mii firewire_core snd iTCO_vendor_support libipw > > yenta_socket crc_itu_t lib80211 rsrc_nonstatic soundcore snd_page_alloc joydev > > pcspkr wmi serio_raw ata_generic pata_acpi i915 drm i2c_algo_bit i2c_core video > > output [last unloaded: scsi_wait_scan] > > Pid: 2418, comm: S58ntpd Not tainted 2.6.29-16.fc10.i686.PAE #1 > > Call Trace: > > [<c04396d1>] warn_slowpath+0x7c/0xbd > > [<c0457fe1>] ? register_lock_class+0x17/0x290 > > [<c0458d61>] ? mark_lock+0x1e/0x349 > > [<c0556448>] ? _raw_spin_unlock+0x74/0x78 > > [<c0458d61>] ? mark_lock+0x1e/0x349 > > [<c055a060>] ? check_sync+0x37/0x341 > > [<c055a112>] check_sync+0xe9/0x341 > > [<c0711245>] ? _spin_unlock_irqrestore+0x45/0x55 > > [<c04592db>] ? trace_hardirqs_on+0xb/0xd > > [<c055a4d1>] debug_dma_sync_single_for_device+0x2f/0x39 > > [<f828f722>] dma_sync_single_for_device+0x4a/0x59 [b44] > > [<f828f76f>] ssb_dma_sync_single_for_device+0x3e/0x48 [b44] > > [<f8291d1e>] b44_recycle_rx+0x18c/0x196 [b44] > > [<f8291f9f>] b44_poll+0x277/0x3c0 [b44] > > [<c0687bb9>] net_rx_action+0xa1/0x1ca > > [<c043e30a>] __do_softirq+0x9d/0x154 > > [<c043e413>] do_softirq+0x52/0x7e > > [<c043e56f>] irq_exit+0x49/0x77 > > [<c040b22e>] do_IRQ+0x97/0xad > > [<c0409dac>] common_interrupt+0x2c/0x34 I don't know if this is related, but the following patch seems to fix some DMA mapping bug. Can somebody comment who does understand the code better than me? (completely untested) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c net/8021q/vlan_core.c net/core/dev.c
2009-02-26b44: Disable device on shutdownMichael Buesch
Disable the SSB core on device shutdown. This has two advantages: 1) A clean device shutdown is always desired here, because we disable the device's global crystal in the next statement. 2) This fixes a bug where the device will come up with the enable-bit set on the next initialization (without a reboot inbetween). This causes breakage on the second initialization due to code that checks this bit (ssb_device_is_enabled() checks). Reported-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-26b44: Unconditionally enable interrupt routing on resetMichael Buesch
Unconditionally setup the IRQ routing on chip reset. It's safe to call ssb_pcicore_dev_irqvecs_enable() unconditionally, because it has internal checks for redundant calls. This fixes problems where hardware will not come up properly due to quirks in the enable-bit hardware. Reported-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-10netdev: Use __netdev_alloc_skb() instead of __dev_alloc_skb().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-21net: Remove redundant NAPI functionsBen Hutchings
Following the removal of the unused struct net_device * parameter from the NAPI functions named *netif_rx_* in commit 908a7a1, they are exactly equivalent to the corresponding *napi_* functions and are therefore redundant. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-15b44: GFP_DMA skb should not escape from driverEric Dumazet
b44 chip has some hardware limitations, that need GFP_DMA bounce buffers in some situations. In order to not deplete DMA zone, we should keep allocated GFP_DMA skb only for driver use. At rx time, we copy such skb to newly allocated skb, reusing existing copybreak infrastructure. On machines with low amount of memory, all skb meet the hardware limitation, so no copy is needed. We detect this situation using a new device flag, set to one if one GFP_DMA skb was ever allocated by b44_alloc_rx_skb(). Previously allocated skb, even outside from DMA zone will then be recycled, to have minimal impact on DMA zone use. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Tested-by: Ionut Leonte <ionut.leonte@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-11b44: fix misalignment and wasted space in rx handlingFelix Fietkau
Broadcom 4400 puts a header of configurable size (apparently needs to be at least 28 bytes) in front of received packets. When handling this, the previous code accidentally added the offset 30 *twice* for the software and once for the hardware, thereby cancelling out the IP alignment effect of the 30 byte padding and wasting an additional 30 bytes of memory per packet. This patch fixes this problem and improves routing throughput by about 30% on MIPS, where unaligned access is expensive. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-07b44: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-26net: Fix warning fallout from recent NAPI interface changes.David S. Miller
When we removed the network device argument from several NAPI interfaces in 908a7a16b852ffd618a9127be8d62432182d81b4 ("net: Remove unused netdev arg from some NAPI interfaces.") several drivers now started getting unused variable warnings. This fixes those up. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-22net: Remove unused netdev arg from some NAPI interfaces.Neil Horman
When the napi api was changed to separate its 1:1 binding to the net_device struct, the netif_rx_[prep|schedule|complete] api failed to remove the now vestigual net_device structure parameter. This patch cleans up that api by properly removing it.. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-27ssb, b43, b43legacy, b44: Rewrite SSB DMA APIMichael Buesch
This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-04-15ssb: Fix usage of struct device used for DMAingMichael Buesch
This fixes DMA on architectures where DMA is nontrivial, like PPC64. We must use the host-device's (PCI) struct device for any DMA operation instead of the SSB device. For this we add a new struct device pointer to the SSB device structure that will always point to the right device for DMAing. Without this patch b43 and b44 drivers won't work on complex-DMA architectures, that for example need dev->archdata for DMA operations. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25b44: Truncate PHY addressMichael Buesch
Some ROMs on embedded devices store incorrect values for the PHY address of the ethernet device. It looks like the number is sign-extended. Truncate the value by applying the PHY-address mask to it. The patch was tested on a bcm47xx embedded system (where the bug triggers) and a bcm4400 PCI card. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28b44: power down PHY when interface downMiguel Botón
This is just this patch (http://lkml.org/lkml/2007/7/1/51) but adapted to the 'b44' ssb driver. Signed-off-by: Miguel Botón <mboton@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b44: Convert to use of the new SPROM structureLarry Finger
The b44 driver is changed to use the new SPROM data structure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[netdrvr] Stop using legacy hooks ->self_test_count, ->get_stats_countJeff Garzik
These have been superceded by the new ->get_sset_count() hook. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[B44]: port to native ssb supportMichael Buesch
Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()Joe Perches
This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Nuke SET_MODULE_OWNER macro.Ralf Baechle
It's been a useless no-op for long enough in 2.6 so I figured it's time to remove it. The number of people that could object because they're maintaining unified 2.4 and 2.6 drivers is probably rather small. [ Handled drivers added by netdev tree and some missed IRDA cases... -DaveM ] Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[NET]: Make NAPI polling independent of struct net_device objects.Stephen Hemminger
Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-31[NET]: ethtool_perm_addr only has one implementationMatthew Wilcox
All drivers implement ethtool get_perm_addr the same way -- by calling the generic function. So we can inline the generic function into the caller and avoid going through the drivers. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-08b44: use netdev_alloc_skbStephen Hemminger
Use netdev_alloc_skb rather than dev_alloc_skb when allocating receive buffers. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08b44: packet offset is constantStephen Hemminger
The receive buffer offset is constant in this driver. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08b44: tx bounce sizing.Stephen Hemminger
No need to grap full size MTU buffer for possibly small transmit bounce buffers. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08b44: timer power savingStephen Hemminger
Make the PHY and statistic timer run on one second boundary for powersaving. On resume, the driver should check for link up immediately, to get online faster (rather than waiting for the next second). Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-25[SK_BUFF]: Introduce skb_copy_from_linear_data{_offset}Arnaldo Carvalho de Melo
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2007-04-25[ETH]: Make eth_type_trans set skb->dev like the other *_type_transArnaldo Carvalho de Melo
One less thing for drivers writers to worry about. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 12:33:55 +0000