summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2020-10-18Merge tag 'for-linus-5.10-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull more ubi and ubifs updates from Richard Weinberger: "UBI: - Correctly use kthread_should_stop in ubi worker UBIFS: - Fixes for memory leaks while iterating directory entries - Fix for a user triggerable error message - Fix for a space accounting bug in authenticated mode" * tag 'for-linus-5.10-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: journal: Make sure to not dirty twice for auth nodes ubifs: setflags: Don't show error message when vfs_ioc_setflags_prepare() fails ubifs: ubifs_jnl_change_xattr: Remove assertion 'nlink > 0' for host inode ubi: check kthread_should_stop() after the setting of task state ubifs: dent: Fix some potential memory leaks while iterating entries ubifs: xattr: Fix some potential memory leaks while iterating entries
2020-10-17Merge tag 'mtd/for-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "NAND core changes: - Drop useless 'depends on' in Kconfig - Add an extra level in the Kconfig hierarchy - Trivial spellings - Dynamic allocation of the interface configurations - Dropping the default ONFI timing mode - Various cleanup (types, structures, naming, comments) - Hide the chip->data_interface indirection - Add the generic rb-gpios property - Add the ->choose_interface_config() hook - Introduce nand_choose_best_sdr_timings() - Use default values for tPROG_max and tBERS_max - Avoid redefining tR_max and tCCS_min - Add a helper to find the closest ONFI mode - bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: - fsl-upm: Deprecation of specific DT properties - fsl_upm: Driver rework and cleanup in favor of ->exec_op() - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use - brcmnand: ECC error handling on EDU transfers - brcmnand: Don't default to EDU transfers - qcom: Set BAM mode only if not set already - qcom: Avoid write to unavailable register - gpio: Driver rework in favor of ->exec_op() - tango: ->exec_op() conversion - mtk: ->exec_op() conversion Raw NAND chip drivers changes: - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC HyperBus changes: - DMA support for TI's AM654 HyperBus controller driver. - HyperBus frontend driver for Renesas RPC-IF driver. SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi Add Alder Lake-S PCI ID MTD Core changes: - mtdoops: Don't run panic write twice - mtdconcat: Correctly handle panic write - Use DEFINE_SHOW_ATTRIBUTE" * tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits) mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled mtd: hyperbus: add Renesas RPC-IF driver Revert "mtd: spi-nor: Prefer asynchronous probe" mtd: parsers: bcm63xx: Do not make it modular mtd: spear_smi: Enable compile testing mtd: maps: vmu-flash: fix typos for struct memcard mtd: physmap: Add Baikal-T1 physically mapped ROM support mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu mtd: onenand: simplify the return expression of onenand_transfer_auto_oob mtd: rawnand: cadence: remove a redundant dev_err call mtd: rawnand: ams-delta: Fix non-OF build warning mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops() mtd: rawnand: Introduce nand_set_ecc_on_host_ops() mtd: rawnand: atmel: Check return values for nand_read_data_op mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size() mtd: rawnand: qcom: Simplify with dev_err_probe() mtd: rawnand: marvell: Fix and update kerneldoc mtd: rawnand: marvell: Simplify with dev_err_probe() mtd: rawnand: gpmi: Simplify with dev_err_probe() mtd: rawnand: atmel: Simplify with dev_err_probe() ...
2020-10-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "The latest advances in computer science from the trivial queue" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: xtensa: fix Kconfig typo spelling.txt: Remove some duplicate entries mtd: rawnand: oxnas: cleanup/simplify code selftests: vm: add fragment CONFIG_GUP_BENCHMARK perf: Fix opt help text for --no-bpf-event HID: logitech-dj: Fix spelling in comment bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG MAINTAINERS: rectify MMP SUPPORT after moving cputype.h scif: Fix spelling of EACCES printk: fix global comment lib/bitmap.c: fix spello fs: Fix missing 'bit' in comment
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-12mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabledVignesh Raghavendra
commit 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads to build failure[1] with COMPILE_TEST and RPCIF_HYPERBUS enabled. This is because driver needs functions RENESAS_RPCIF which is only buildable for CONFIG_ARCH_RENESAS. Fix this by dropping COMPILE_TEST from RPCIF_HYPERBUS Kconfig entry. This ensures driver can be built only when RENESAS_RPCIF is also selected. [1]: rpc-if.c:(.text+0x20): undefined reference to `rpcif_disable_rpm' ld: drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_prepare_read': rpc-if.c:(.text+0xd6): undefined reference to `rpcif_prepare' ld: drivers/mtd/hyperbus/rpc-if.o: in function `rpcif_hb_read16': [...] Fixes: 5de15b610f78 ("mtd: hyperbus: add Renesas RPC-IF driver") leads Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-10-11Merge tag 'cfi/for-5.10' of ↵Richard Weinberger
gitolite.kernel.org:pub/scm/linux/kernel/git/mtd/linux into mtd/next HyperBus changes * DMA support for TI's AM654 HyperBus controller driver. * HyperBus frontend driver for Renesas RPC-IF driver.
2020-10-11Merge tag 'spi-nor/for-5.10' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - Support for Winbond w25q64jwm flash - Enable 4K sector support for mx25l12805d SPI NOR controller drivers changes: - intel-spi: - Add Alder Lake-S PCI ID
2020-10-11Merge tag 'nand/for-5.10' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next NAND core changes: * Use the new generic ECC object * Create helpers to set/extract the ECC requirements * Create a helper to extract the ECC configuration * Add a NAND page I/O request type * Introduce the ECC engine framework Raw NAND core changes: * Don't overwrite the error code from nand_set_ecc_soft_ops() * Introduce nand_set_ecc_on_host_ops() * Use the NAND framework user_conf object for ECC flags * Use the ECC framework user input parsing bits * Use the ECC framework nand_ecc_is_strong_enough() helper * Use the ECC framework OOB layouts * Make use of the ECC framework * Use nanddev_get/set_ecc_requirements() when relevant * Use the new ECC engine type enumeration * Separate the ECC engine type and the ECC byte placement * Move the nand_ecc_algo enum to the generic NAND layer * Rename the ECC algorithm enumeration items * Add a kernel doc to the ECC algorithm enumeration * DT bindings: - Document boolean NAND ECC properties - Document nand-ecc-engine - Document nand-ecc-placement Raw NAND drivers changes: * Ams-Delta: Fix non-OF build warning * Atmel: - Check return values for nand_read_data_op - Simplify with dev_err_probe() - Get rid of the legacy interface implementation - Convert the driver to exec_op() - Use nand_prog_page_end_op() - Use nand_{write,read}_data_op() - Drop redundant nand_read_page_op() - Enable the NFC controller at probe time - Disable clk on error handling path in probe * Cadence: remove a redundant dev_err call * Gpmi: - Simplify with dev_err_probe() * Marvell: - Fix and update kerneldoc - Simplify with dev_err_probe() - Fix and update kerneldoc - Simplify with dev_err_probe() - Support panic_write for mtdoops * Onenand: - Simplify the return expression of onenand_transfer_auto_oob - Simplify with dev_err_probe() * Oxnas: cleanup/simplify code * Pasemi: Make pasemi_device_ready() static * Qcom: Simplify with dev_err_probe() * Stm32_fmc2: fix a buffer overflow * Vf610: Remove unused function vf610_nfc_transfer_size() SPI-NAND changes: * Use nanddev_get_ecc_conf() when relevant * Gigadevice: - Add support for GD5F4GQ4xC - Add QE Bit - Use only one dummy byte in QUADIO * Macronix: - Add support for MX31UF1GE4BC - Add support for MX31LF1GE4BC
2020-10-06mtd: hyperbus: add Renesas RPC-IF driverSergei Shtylyov
Add the HyperFLash driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/78abb851-2beb-fe7d-87e5-ce58ee877d35@gmail.com
2020-10-06Revert "mtd: spi-nor: Prefer asynchronous probe"Vignesh Raghavendra
This reverts commit 03edda0e1edaa3c2e99239c66e3c14d749318fd6. This leads to warn dump like [1] on some platforms and reorders MTD devices which may break user space expectations [2]. So revert the change. [1]: [ 1.849801] ------------[ cut here ]------------ [ 1.854271] mscc_felix 0000:00:00.5: device is disabled, skipping [ 1.858753] WARNING: CPU: 1 PID: 7 at kernel/kmod.c:136 __request_module+0x3a4/0x568 [...] [2] Bug report: https://lore.kernel.org/linux-mtd/20201003150633.23416-1-michael@walle.cc/ Reported-by: Michael Walle <michael@walle.cc> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201005090321.8724-1-vigneshr@ti.com
2020-10-02mtd: parsers: bcm63xx: Do not make it modularFlorian Fainelli
With commit 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection"), we generate a reference to fw_arg3 which is the fourth firmware/command line argument on MIPS platforms. That symbol is not exported and would cause a linking failure. The parser is typically necessary to boot a BCM63xx-based system anyway so having it be part of the kernel image makes sense, therefore make it 'bool' instead of 'tristate'. Fixes: 91e81150d388 ("mtd: parsers: bcm63xx: simplify CFE detection") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929172726.30469-1-f.fainelli@gmail.com
2020-10-02mtd: spear_smi: Enable compile testingMiquel Raynal
This driver does not contain any architecture specific code, enable compile testing it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200928155715.14370-1-miquel.raynal@bootlin.com
2020-10-02mtd: maps: vmu-flash: fix typos for struct memcardBernard Zhao
Change struct memcard`s element "removeable" -> "removable". Signed-off-by: Bernard Zhao <bernard@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200922112814.26761-1-bernard@vivo.com
2020-10-02mtd: physmap: Add Baikal-T1 physically mapped ROM supportSerge Semin
Baikal-T1 Boot Controller provides an access to a RO storages, which are physically mapped into the SoC MMIO space. In particularly there are Internal ROM embedded into the SoC with a pre-installed firmware, externally attached SPI flash (also accessed in the read-only mode) and a memory region, which mirrors one of them in accordance with the currently enabled system boot mode (also called Boot ROM). This commit adds the Internal ROM support to the physmap driver of the MTD kernel subsystem. The driver will create the Internal ROM MTD as long as it is defined in the system dts file. The physically mapped SPI flash region will be used to implement the SPI-mem interface. The mirroring memory region won't be accessible directly since it's redundant due to both bootable regions being exposed anyway. Note we had to create a dedicated code for the ROMs since read from the corresponding memory regions must be done via the dword-aligned addresses. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200920111445.21816-1-Sergey.Semin@baikalelectronics.ru
2020-10-02mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmuLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200919100854.1639267-1-liushixin2@huawei.com
2020-09-30mtd: onenand: simplify the return expression of onenand_transfer_auto_oobLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200921082441.2591669-1-liushixin2@huawei.com
2020-09-30mtd: rawnand: cadence: remove a redundant dev_err callLiu Shixin
There is an error message within devm_ioremap_resource already, so remove the dev_err call to avoid a redundant error message. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200921013805.1724606-1-liushixin2@huawei.com
2020-09-30mtd: rawnand: ams-delta: Fix non-OF build warningJanusz Krzysztofik
Commit 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device tables") introduced an OF module device table but wrapped a reference to it with of_match_ptr() which resolves to NULL in non-OF configs. That resulted in a clang compiler warning on unused variable in non-OF builds. Fix it. drivers/mtd/nand/raw/ams-delta.c:373:34: warning: unused variable 'gpio_nand_of_id_table' [-Wunused-const-variable] static const struct of_device_id gpio_nand_of_id_table[] = { ^ 1 warning generated. Fixes: 7c2f66a960fc ("mtd: rawnand: ams-delta: Add module device tables") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200919080403.17520-1-jmkrzyszt@gmail.com
2020-09-30mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()Tudor Ambarus
The error code received from nand_set_ecc_soft_ops() was overwritten, drop this redundant assignment and use the error code received from the callee. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200917075213.532161-4-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: Introduce nand_set_ecc_on_host_ops()Tudor Ambarus
There were too many levels of indentation and the code was hard to read. Introduce a new function, similar to nand_set_ecc_soft_ops(). Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200917075213.532161-3-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Check return values for nand_read_data_opAlex Dewar
In atmel_nand_pmecc_read_pg(), nand_read_data_op() is called twice without the return values being checked for errors. Add these checks. Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200914214245.14626-1-alex.dewar90@gmail.com
2020-09-30mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()YueHaibing
commit ecc40b8df59a ("mtd: rawnand: vf610_nfc: remove old hooks") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200909134318.36340-1-yuehaibing@huawei.com
2020-09-30mtd: rawnand: qcom: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-6-krzk@kernel.org
2020-09-30mtd: rawnand: marvell: Fix and update kerneldocKrzysztof Kozlowski
Fix kerneldoc comments and add missing documentation for members to fix W=1 compile warnings like: drivers/mtd/nand/raw/marvell_nand.c:251: warning: cannot understand function prototype: 'struct marvell_hw_ecc_layout ' drivers/mtd/nand/raw/marvell_nand.c:342: warning: Function parameter or member 'layout' not described in 'marvell_nand_chip' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-5-krzk@kernel.org
2020-09-30mtd: rawnand: marvell: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-4-krzk@kernel.org
2020-09-30mtd: rawnand: gpmi: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-3-krzk@kernel.org
2020-09-30mtd: rawnand: atmel: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-2-krzk@kernel.org
2020-09-30mtd: onenand: Simplify with dev_err_probe()Krzysztof Kozlowski
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200901142535.12819-1-krzk@kernel.org
2020-09-30mtd: rawnand: marvell: Support panic_write for mtdoopsChris Packham
Under a panic context we can't get an interrupt. Actively poll for the RB status when performing a panic_write. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200828011237.22066-1-chris.packham@alliedtelesis.co.nz
2020-09-30mtd: spinand: gigadevice: Add support for GD5F4GQ4xCHauke Mehrtens
This adds support for the following 4GiB chips: GD5F4GQ4RCYIG 1.8V GD5F4GQ4UCYIG 3.3V The datasheet can be found here: https://www.novitronic.ch/sixcms/media.php/2/DS-00173-GD5F4GQ4xCxIG-Rev1.574695.pdf The GD5F4GQ4UCYIGT (3.3V) version is used on the Imagination Technologies Creator Ci40 (Marduk), the 1.8V version was not tested. This device only works in single SPI mode and not in dual or quad mode for me on this board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-4-hauke@hauke-m.de
2020-09-30mtd: spinand: gigadevice: Add QE BitHauke Mehrtens
The following GigaDevice chips have the QE BIT in the feature flags, I checked the datasheets, but did not try this. * GD5F1GQ4xExxG * GD5F1GQ4xFxxG * GD5F1GQ4UAYIG * GD5F4GQ4UAYIG The Quad operations like 0xEB mention that the QE bit has to be set. Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-3-hauke@hauke-m.de
2020-09-30mtd: spinand: gigadevice: Only one dummy byte in QUADIOHauke Mehrtens
The datasheet only lists one dummy byte in the 0xEH operation for the following chips: * GD5F1GQ4xExxG * GD5F1GQ4xFxxG * GD5F1GQ4UAYIG * GD5F4GQ4UAYIG Fixes: c93c613214ac ("mtd: spinand: add support for GigaDevice GD5FxGQ4xA") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200820165121.3192-2-hauke@hauke-m.de
2020-09-30mtd: rawnand: vf610: disable clk on error handling path in probeEvgeny Novikov
vf610_nfc_probe() does not invoke clk_disable_unprepare() on one error handling path. The patch fixes that. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 6f0ce4dfc5a3 ("mtd: rawnand: vf610: Avoid a potential NULL pointer dereference") Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200806072634.23528-1-novikov@ispras.ru
2020-09-30mtd: rawnand: oxnas: cleanup/simplify codePavel Machek
Simplify oxnas_nand_probe. Signed-off-by: Pavel Machek (CIP) <pavel@denx.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200724083825.GA31437@amd
2020-09-30mtd: spinand: macronix: Add support for MX31UF1GE4BCYouChing Lin
The Macronix MX31UF1GE4BC is a 1.8V, 1Gbit (128MB) serial NAND flash device. Validated by read, erase, read back, write and read back on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (driver/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595404978-31079-3-git-send-email-ycllin@mxic.com.tw
2020-09-30mtd: spinand: macronix: Add support for MX31LF1GE4BCYouChing Lin
The Macronix MX31LF1GE4BC is a 3V, 1Gbit (128MB) serial NAND flash device. Validated by read, erase, read back, write and read back on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (driver/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595404978-31079-2-git-send-email-ycllin@mxic.com.tw
2020-09-30mtd: rawnand: pasemi: Make pasemi_device_ready() staticWei Yongjun
The sparse tool complains as follows: drivers/mtd/nand/raw/pasemi_nand.c:71:5: warning: symbol 'pasemi_device_ready' was not declared. Should it be static? This function is not used outside of pasemi_nand.c, so this commit marks it static. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200721151657.41027-1-weiyongjun1@huawei.com
2020-09-30mtd: rawnand: stm32_fmc2: fix a buffer overflowChristophe Kerello
This patch solves following static checker warning: drivers/mtd/nand/raw/stm32_fmc2_nand.c:350 stm32_fmc2_nfc_select_chip() error: buffer overflow 'nfc->data_phys_addr' 2 <= 2 The CS value can only be 0 or 1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1595325127-32693-1-git-send-email-christophe.kerello@st.com
2020-09-30mtd: rawnand: atmel: Get rid of the legacy interface implementationBoris Brezillon
Now that exec_op() is implemented, we can get rid of all the legacy hooks. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-7-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Convert the driver to exec_op()Boris Brezillon
Both SMC and HSMC are converted to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-6-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Use nand_prog_page_end_op()Boris Brezillon
The nand_prog_page_end_op() sequence is open-coded in atmel_hsmc_nand_pmecc_write_pg(). Let's use the generic helper here. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-5-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Use nand_{write,read}_data_op()Boris Brezillon
Use the nand_{write,read}_data_op() helpers instead of calling the atmel_nand_{read,write}_buf() functions directly. This will ease the transition to exec_op(). Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-4-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Drop redundant nand_read_page_op()Boris Brezillon
The legacy page read path in atmel_hsmc_nand_pmecc_read_pg() issues a nand_read_page_op() that's already issued by atmel_nand_pmecc_read_pg(). Let's get rid of the unneeded one. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-3-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: atmel: Enable the NFC controller at probe timeBoris Brezillon
No need to enable it everytime select_chip() is called. If we really care about PM, we should implement runtime PM hooks and disable the controller and all its clocks when the controller has been unused for some time. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200720131356.1579073-2-tudor.ambarus@microchip.com
2020-09-30mtd: rawnand: Use the NAND framework user_conf object for ECC flagsMiquel Raynal
Instead of storing the ECC flags in chip->ecc.options, use nanddev->ecc.user_conf.flags. There is currently only one to save: NAND_ECC_MAXIMIZE. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-21-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework user input parsing bitsMiquel Raynal
Many helpers are generic to all NAND chips, they should not be raw-NAND specific, so use the generic ones. To avoid moving all the raw NAND core "history" into the generic NAND layer, we keep a part of this parsing in the raw NAND core to ensure backward compatibility. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-20-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helperMiquel Raynal
Plus, the new helper has a more "english" name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-19-miquel.raynal@bootlin.com
2020-09-30mtd: rawnand: Use the ECC framework OOB layoutsMiquel Raynal
No need to have our own in the raw NAND core. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-18-miquel.raynal@bootlin.com
2020-09-30mtd: hyperbus: hbmc-am654: Add DMA support for readsVignesh Raghavendra
AM654 HyperBus controller provides MMIO interface to read data from flash. So add DMA memcpy support for reading data over MMIO interface. This provides 5x improvement in throughput and reduces CPU usage as well. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200924081214.16934-5-vigneshr@ti.com
2020-09-30mtd: hyperbus: hbmc-am654: Drop pm_runtime* calls from probeVignesh Raghavendra
Recent genpd changes for K3 platform ensure device is ON before driver probe is called. Therefore, drop redundant pm_runtime_* calls from driver to simplify the code. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20200924081214.16934-4-vigneshr@ti.com