summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)Author
2019-04-18mtd: rawnand: denali_pci: rename goto labelsMasahiro Yamada
As Documentation/process/coding-style.rst says, choose label names which say what the goto does. The out_<action> label style is already used in denali_dt.c. Rename likewise for denali_pci.c Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: denali: use bool type instead of int where appropriateMasahiro Yamada
Use 'bool' type for the following boolean parameters. - write (write or read?) - dma_avail (DMA engine available or not?) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: denali: switch over to ->exec_op() from legacy hooksMasahiro Yamada
Implement ->exec_op(), and remove the deprecated hooks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: denali: remove unneeded casts in denali_{read, write}_pioMasahiro Yamada
Since (u32 *) can accept an opaque pointer, the explicit casting from (void *) to (u32 *) is redundant. Change the function argument type to remove the casts. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: denali: refactor raw page accessorsMasahiro Yamada
The Denali IP adopts the syndrome page layout (payload and ECC are interleaved). The *_page_raw() and *_oob() callbacks are complicated because they must hide the underlying layout used by the hardware, and always return contiguous in-band and out-of-band data. The Denali IP cannot reuse nand_{read,write}_page_raw_syndrome() in nand_base.c because its hardware ECC engine skips some of first bytes in OOB. That is why this driver implements specially-crafted *_page_raw() and *_oob() hooks. Currently, similar code is duplicated to reorganize the data layout. For example, denali_read_page_raw() and denali_write_page_raw() look almost the same. The complexity is partly due to the DMA transfer used for better performance of *_page_raw() accessors. On second thought, we do not need to care about their performance because MTD_OPS_RAW is rarely used. Let's focus on code cleanups rather than the performance. This commit removes the internal buffer for DMA, and factors out as much code as possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: denali: use more nand_chip pointers for internal functionsMasahiro Yamada
With the recent refactoring, the NAND driver hooks now take a pointer to nand_chip. Add to_denali() in order to convert (struct nand_chip *) to (struct denali_nand_info *) directly. It is more useful than the current mtd_to_denali(). I changed some helper functions to take (struct nand_chip *). This will avoid pointer conversion back and forth, and ease further development. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: atmel: Fix spelling mistake in error messageMiquel Raynal
Wrong copy/paste from the previous block, the error message should refer to #size-cells instead of #address-cells. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-04-18mtd: rawnand: fsl_elbc: Make SW ECC workMarek Behún
Move the code that choses ECC into _attach_chip, which is executed only after the chip->ecc.* properties were loaded from device-tree. This way we know which ECC method was chosen by the device-tree and can set methods appropriately. The chip->ecc.*page methods should be set to fsl_elbc_*page only in HW ECC mode. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: fsl_elbc: Implement RNDOUT commandMarek Behún
This is needed for SW ECC. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: fsl_elbc: Cosmetic moveMarek Behún
Move the fsl_elbc_attach_chip function after the definitions of fsl_elbc_read_page and friends in preparation for the next patch. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: fix build dependencyAnders Roxell
When enabling CONFIG_MTD_NAND_ECC_SW_BCH as a module, the MTD_NAND_ECC_SW_BCH depends on MTD_NAND, but the module controlled by MTD_NAND links against the module controlled by MTD_NAND_ECC_SW_BCH. This leads to the following link failure. aarch64-linux-gnu-ld: drivers/mtd/nand/raw/nand_base.o: in function `nand_cleanup': ../drivers/mtd/nand/raw/nand_base.c:5886: undefined reference to `nand_bch_free' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5886:(.text+0x9928): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nand_bch_free' aarch64-linux-gnu-ld: drivers/mtd/nand/raw/nand_base.o: in function `nand_set_ecc_soft_ops': ../drivers/mtd/nand/raw/nand_base.c:5093: undefined reference to `nand_bch_calculate_ecc' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5093:(.text+0xe914): relocation truncated to fit: R_AARCH64_ADR_PREL_PG_HI21 against undefined symbol `nand_bch_calculate_ecc' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5093: undefined reference to `nand_bch_calculate_ecc' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5094: undefined reference to `nand_bch_correct_data' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5094:(.text+0xe934): relocation truncated to fit: R_AARCH64_ADR_PREL_PG_HI21 against undefined symbol `nand_bch_correct_data' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5094: undefined reference to `nand_bch_correct_data' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5148: undefined reference to `nand_bch_init' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5148:(.text+0xebbc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nand_bch_init' Rework CONFIG_MTD_NAND_ECC_SW_BCH from tristate to bool, and then link the nand_bch.o file into nand.ko if its enabled. Fixes: 51ef1d0b2095 ("mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Remove useless line in KconfigMiquel Raynal
Prepare changes that will lay in this file to better express what is NAND related and what is not in menuconfig. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Change Kconfig titles and re-order a bit the listMiquel Raynal
This list is a mess, while some items should probably not be in the raw/ sub-directory, others are definitely at the right place but not with the right description. Write uniform titles and group IPs by vendor. NAND controllers will appear under the list named "Raw/parallel NAND flash controllers" while the other drivers will appear under "Misc". Software ECC engines will later be moved out of the raw/ directory. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Clarify Kconfig entry for software Hamming ECC entriesMiquel Raynal
The software Hamming ECC correction implementation is referred as MTD_NAND_ECC which is too generic. Rename it MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an SMC quirk in the Hamming implementation as MTD_NAND_ECC_SW_HAMMING_SMC. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Clarify Kconfig entry for software BCH ECC algorithmMiquel Raynal
There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-08mtd: rawnand: Get rid of chip->ecc_{strength,step}_dsBoris Brezillon
nand_device embeds a nand_ecc_req object which contains the minimum strength and step-size required by the NAND device. Drop the chip->ecc_{strength,step}_ds fields and use chip->base.eccreq.{strength,step_size} instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->numchipsBoris Brezillon
The same information is provided by nanddev_ntargets(). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Get rid of chip->chipsizeBoris Brezillon
The target size can now be returned by nanddev_get_targetsize(). Get rid of the chip->chipsize field and use this helper instead. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: Get rid of chip->bits_per_cellBoris Brezillon
Now that we inherit from nand_device, we can use nand_device->memorg.bits_per_cell instead of having our own field at the nand_chip level. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Use nanddev_mtd_max_bad_blocks()Boris Brezillon
nanddev_mtd_max_bad_blocks() is implemented by the generic NAND layer and is already doing what we need. Reuse this function instead of having our own implementation. While at it, get rid of the ->max_bb_per_die and ->blocks_per_die fields which are now unused. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Move all page cache related fields to a sub-structBoris Brezillon
Looking at the field names it's hard to tell what ->data_buf, ->pagebuf and ->pagebuf_bitflips are for. Clarify that by moving those fields in a sub-struct named pagecache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Provide a helper to get chip->data_bufBoris Brezillon
We plan to move cache related fields to a pagecache struct in nand_chip but some drivers access ->pagebuf directly to invalidate the cache before they start using ->data_buf. Let's provide an helper that returns a pointer to ->data_buf after invalidating the cache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Initialize the nand_device objectBoris Brezillon
In order to use some of the nanddev_xxx() helpers, we need to initialize the nand_device object embedded in nand_chip using nanddev_init(). This requires implementing nand_ops. We also drop useless mtd->xxx initialization when they're already taken case of by nanddev_init(). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: Fill memorg during detectionBoris Brezillon
If we want to use the generic NAND layer, we need to have the memorg struct appropriately filled. Patch the detection code to fill this struct. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: spinand: Implement mtd->_max_bad_blocksBoris Brezillon
We just have to use nanddev_mtd_max_bad_blocks(). Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: nand: Add max_bad_eraseblocks_per_lun info to memorgBoris Brezillon
NAND datasheets usually give the maximum number of bad blocks per LUN and this number can be used to help upper layers decide how much blocks they should reserve for bad block handling. Add a max_bad_eraseblocks_per_lun to the nand_memory_organization struct and update the NAND_MEMORG() macro (and its users) accordingly. We also provide a default mtd->_max_bad_blocks() implementation. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-04-08mtd: rawnand: meson: set oob layout opsLiang Yang
Specify the oob layout operation to avoid no oob scheme defined for some nand flash. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Liang Yang <liang.yang@amlogic.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: vf610: Avoid a potential NULL pointer dereferenceAditya Pakki
of_match_device can return NULL if there is no matching device. Avoid a potential NULL pointer dereference by checking for the return value and passing the error upstream. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: ingenic: Move BBTs out of ECC areaPaul Cercueil
The generic layout for BBT markers will most likely overlap with our ECC bytes in the OOB, so move the BBT markers outside the OOB area. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: ingenic: Add ooblayout for the Qi Ben NanonotePaul Cercueil
The Ben Nanonote from Qi Hardware expects a specific OOB layout on its NAND. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: ingenic: Add support for the JZ4725BPaul Cercueil
The boot ROM of the JZ4725B SoC expects a specific OOB layout on the NAND, so we use it unconditionally in the ingenic-nand driver. Also add the jz4725b-bch driver to support the JZ4725B-specific BCH hardware. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: ingenic: Add support for the JZ4740Paul Cercueil
Add support for probing the ingenic-nand driver on the JZ4740 SoC from Ingenic, and the jz4740-ecc driver to support the JZ4740-specific ECC hardware. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: ingenic: Make use of ecc-engine propertyPaul Cercueil
Use the 'ecc-engine' standard property instead of the custom 'ingenic,bch-controller' custom property, which is now deprecated. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-08mtd: rawnand: ingenic: Separate top-level and SoC specific codePaul Cercueil
The ingenic-nand driver uses an API provided by the jz4780-bch driver. This makes it difficult to support other SoCs in the jz4780-bch driver. To work around this, we separate the API functions from the SoC-specific code, so that these API functions are SoC-agnostic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-05mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_bufferLiu Jian
In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie <yihuaijie@huawei.com> Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-04-01spi-nor: s25fl512s supports region lockingJonas Bonn
Both the BP[0-2] bits and the TBPROT bit are supported on this chip. Tested and verified on a Cypress s25fl512s. Signed-off-by: Jonas Bonn <jonas@norrbonn.se> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-01mtd: spi-nor: intel-spi: Avoid crossing 4K address boundary on read/writeAlexander Sverdlin
It was observed that reads crossing 4K address boundary are failing. This limitation is mentioned in Intel documents: Intel(R) 9 Series Chipset Family Platform Controller Hub (PCH) Datasheet: "5.26.3 Flash Access Program Register Access: * Program Register Accesses are not allowed to cross a 4 KB boundary..." Enhanced Serial Peripheral Interface (eSPI) Interface Base Specification (for Client and Server Platforms): "5.1.4 Address For other memory transactions, the address may start or end at any byte boundary. However, the address and payload length combination must not cross the naturally aligned address boundary of the corresponding Maximum Payload Size. It must not cross a 4 KB address boundary." Avoid this by splitting an operation crossing the boundary into two operations. Fixes: 8afda8b26d01 ("spi-nor: Add support for Intel SPI serial flash controller") Cc: stable@vger.kernel.org Reported-by: Romain Porte <romain.porte@nokia.com> Tested-by: Pascal Fabreges <pascal.fabreges@nokia.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: spi-nor: Fix comment of spi_nor_find_best_erase_type()Alexander Sverdlin
Erase types are sorted *smallest* type first, refer to spi_nor_sort_erase_mask(). Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: spi-nor: Print all JEDEC ID bytes on errorGeert Uytterhoeven
If identification of an SPI NOR FLASH fails, the JEDEC ID is printed, which is stored in the first 3 bytes of the ID read from the FLASH. However, the extended JEDEC ID, which is stored in the remaining bytes, also matters, as it is used for identification of some FLASH types. Print all (currently 6) ID bytes read to ease failure analysis and debugging. Suggested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: ingenic: Rename jz4780_bch_init to jz4780_bch_resetPaul Cercueil
The jz4780_bch_init name was confusing, as it suggested that its content should be executed once at init time, whereas what the function really does is reset the hardware for a new ECC operation. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: ingenic: Rename jz4780_nand driver to ingenic_nandPaul Cercueil
The jz4780_nand driver will be modified to handle all the Ingenic JZ47xx SoCs that the upstream Linux kernel supports (JZ4740, JZ4725B, JZ4770, JZ4780), so it makes sense to rename it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: ingenic: Use SPDX license notifiersPaul Cercueil
Use SPDX license notifiers instead of GPLv2 license text in the headers. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: Move drivers for Ingenic SoCs to subfolderPaul Cercueil
Before adding support for more SoCs and seeing the number of files for these drivers grow, we move them to their own subfolder to keep it tidy. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: meson: fix a potential memory leak in meson_nfc_read_bufMartin Blumenstingl
meson_nfc_dma_buffer_setup() is called with the "info" buffer which is allocated a few lines before using kzalloc(). If meson_nfc_dma_buffer_setup() fails we need to free the allocated "info" buffer instead of only freeing it upon success. Fixes: 8fae856c53500a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Liang Yang <liang.yang@amlogic.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: meson: add missing ENOMEM check in meson_nfc_read_buf()Martin Blumenstingl
kzalloc() can return NULL if memory could not be allocated. Check the return value of the kzalloc() call in meson_nfc_read_buf() to make it consistent with other memory allocations within the meson_nand driver. Fixes: 8fae856c53500a ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Liang Yang <liang.yang@amlogic.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: atmel: switch to SPDX license identifiersTudor Ambarus
Adopt the SPDX license identifiers to ease license compliance management. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: atmel: add sam9x60 nand controller supportTudor Ambarus
The sam9x60 board defines the CCFG_EBICSA register under SFR, and not as a MATRIX register, as previous boards do. NAND Flash I/Os are connected to D16–D23, thus SFR_CCFG_EBICSA.NFD0_ON_D16 is set to 1. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21mtd: rawnand: atmel: add generic name for EBICSA regmapTudor Ambarus
The sam9x60 board defines the CCFG_EBICSA register under SFR, and not as a MATRIX register, as previous boards do. Add a more generic name for the EBICSA regmap, as a prerequisite for sam9x60 nand controller support. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 06:20:45 +0000