summaryrefslogtreecommitdiff
path: root/drivers/mtd/ubi
AgeCommit message (Collapse)Author
2018-10-23ubi: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1373884 ("Missing break in switch") Addresses-Coverity-ID: 114869 ("Missing break in switch") Addresses-Coverity-ID: 114870 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: expose the volume CRC check skip flagQuentin Schulz
Now that we have the logic for skipping CRC check for static UBI volumes in the core, let's expose it to users. This makes use of a padding byte in the volume description data structure as a flag. This flag only tell for now whether we should skip the CRC check of a volume. This checks the UBI volume for which we are trying to skip the CRC check is static. Let's also make sure that the flags passed to verify_mkvol_req are valid. We voluntarily do not take into account the skip_check flag in vol_cdev_write() as we want to make sure what we wrote was correctly written. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: provide a way to skip CRC checksQuentin Schulz
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-08-15ubi: Initialize Fastmap checkmapping correctlyRichard Weinberger
We cannot do it last, otherwithse it will be skipped for dynamic volumes. Reported-by: Lachmann, Juergen <juergen.lachmann@harman.com> Fixes: 34653fd8c46e ("ubi: fastmap: Check each mapping only once") Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07mtd: ubi: Update ubi-media.h to dual licenseLionel Debieve
Update license template using SPDX. Move the global layout of UBI headers to dual license helping UBI to be the standard solution for raw NAND management. Signed-off-by: Lionel Debieve <lionel.debieve@st.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Artem Bityutskiy <dedekind1@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Detect EBA mismatches on-the-flyRichard Weinberger
Now we have the machinery to detect EBA mismatches on-the-fly by comparing the in-memory volume ID and LEB number with the found VID header. This helps to detect malfunction of Fastmap. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Check each mapping only onceRichard Weinberger
Maintain a bitmap to keep track of which LEB->PEB mapping was checked already. That way we have to read back VID headers only once. Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Correctly handle interrupted erasures in EBARichard Weinberger
Fastmap cannot track the LEB unmap operation, therefore it can happen that after an interrupted erasure the mapping still looks good from Fastmap's point of view, while reading from the PEB will cause an ECC error and confuses the upper layer. Instead of teaching users of UBI how to deal with that, we read back the VID header and check for errors. If the PEB is empty or shows ECC errors we fixup the mapping and schedule the PEB for erasure. Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Reported-by: martin bayern <Martinbayern@outlook.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-07ubi: fastmap: Cancel work upon detachRichard Weinberger
Ben Hutchings pointed out that 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") does not really fix the problem, it just reduces the risk to hit the race window where fastmap work races against free()'ing ubi->volumes[]. The correct approach is making sure that no more fastmap work is in progress before we free ubi data structures. So we cancel fastmap work right after the ubi background thread is stopped. By setting ubi->thread_enabled to zero we make sure that no further work tries to wake the thread. Fixes: 29b7a6fa1ec0 ("ubi: fastmap: Don't flush fastmap work on detach") Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Martin Townsend <mtownsend1973@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-11Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code
2018-04-04ubi: Reject MLC NANDRichard Weinberger
While UBI and UBIFS seem to work at first sight with MLC NAND, you will most likely lose all your data upon a power-cut or due to read/write disturb. In order to protect users from bad surprises, refuse to attach to MLC NAND. Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
2018-04-04ubi: Fix error for write accessRomain Izard
When opening a device with write access, ubiblock_open returns an error code. Currently, this error code is -EPERM, but this is not the right value. The open function for other block devices returns -EROFS when opening read-only devices with FMODE_WRITE set. When used with dm-verity, the veritysetup userspace tool is expecting EROFS, and refuses to use the ubiblock device. Use -EROFS for ubiblock as well. As a result, veritysetup accepts the ubiblock device as valid. Cc: stable@vger.kernel.org Fixes: 9d54c8a33eec (UBI: R/O block driver on top of UBI volumes) Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-04ubi: fastmap: Don't flush fastmap work on detachRichard Weinberger
At this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Reported-by: Martin Townsend <mtownsend1973@gmail.com> Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2018-03-21mtd: Stop updating erase_info->state and calling mtd_erase_callback()Boris Brezillon
MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Bert Kenward <bkenward@solarflare.com> --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)
2018-03-15mtd: Unconditionally update ->fail_addr and ->addr in part_erase()Boris Brezillon
->fail_addr and ->addr can be updated no matter the result of parent->_erase(), we just need to remove the code doing the same thing in mtd_erase_callback() to avoid adjusting those fields twice. Note that this can be done because all MTD users have been converted to not pass an erase_info->callback() and are thus only taking the ->addr_fail and ->addr fields into account after part_erase() has returned. While we're at it, get rid of the erase_info->mtd field which was only needed to let mtd_erase_callback() get the partition device back. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: Stop assuming mtd_erase() is asynchronousBoris Brezillon
None of the mtd->_erase() implementations work in an asynchronous manner, so let's simplify MTD users that call mtd_erase(). All they need to do is check the value returned by mtd_erase() and assume that != 0 means failure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-01-18ubi: block: Fix locking for idr_alloc/idr_removeBradley Bolen
This fixes a race with idr_alloc where gd->first_minor can be set to the same value for two simultaneous calls to ubiblock_create. Each instance calls device_add_disk with the same first_minor. device_add_disk calls bdi_register_owner which generates several warnings. WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/devices/virtual/bdi/252:2' WARNING: CPU: 1 PID: 179 at kernel-source/lib/kobject.c:240 kobject_add_internal+0x1ec/0x2f8 kobject_add_internal failed for 252:2 with -EEXIST, don't try to register things with the same name in the same directory WARNING: CPU: 1 PID: 179 at kernel-source/fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x88 sysfs: cannot create duplicate filename '/dev/block/252:2' However, device_add_disk does not error out when bdi_register_owner returns an error. Control continues until reaching blk_register_queue. It then BUGs. kernel BUG at kernel-source/fs/sysfs/group.c:113! [<c01e26cc>] (internal_create_group) from [<c01e2950>] (sysfs_create_group+0x20/0x24) [<c01e2950>] (sysfs_create_group) from [<c00e3d38>] (blk_trace_init_sysfs+0x18/0x20) [<c00e3d38>] (blk_trace_init_sysfs) from [<c02bdfbc>] (blk_register_queue+0xd8/0x154) [<c02bdfbc>] (blk_register_queue) from [<c02cec84>] (device_add_disk+0x194/0x44c) [<c02cec84>] (device_add_disk) from [<c0436ec8>] (ubiblock_create+0x284/0x2e0) [<c0436ec8>] (ubiblock_create) from [<c0427bb8>] (vol_cdev_ioctl+0x450/0x554) [<c0427bb8>] (vol_cdev_ioctl) from [<c0189110>] (vfs_ioctl+0x30/0x44) [<c0189110>] (vfs_ioctl) from [<c01892e0>] (do_vfs_ioctl+0xa0/0x790) [<c01892e0>] (do_vfs_ioctl) from [<c0189a14>] (SyS_ioctl+0x44/0x68) [<c0189a14>] (SyS_ioctl) from [<c0010640>] (ret_fast_syscall+0x0/0x34) Locking idr_alloc/idr_remove removes the race and keeps gd->first_minor unique. Fixes: 2bf50d42f3a4 ("UBI: block: Dynamically allocate minor numbers") Cc: stable@vger.kernel.org Signed-off-by: Bradley Bolen <bradleybolen@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-18mtd: ubi: wl: Fix error return code in ubi_wl_init()Wei Yongjun
Fix to return error code -ENOMEM from the kmem_cache_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f78e5623f45b ("ubi: fastmap: Erase outdated anchor PEBs during attach") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-18ubi: Fix copy/paste error in function documentationSascha Hauer
The function documentation of leb_write_trylock is copied from leb_write_lock. Replace the function name with the correct one. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-18ubi: Fastmap: Fix typoSascha Hauer
Fix misspelling of 'available' in function name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: fastmap: Erase outdated anchor PEBs during attachSascha Hauer
The fastmap update code might erase the current fastmap anchor PEB in case it doesn't find any new free PEB. When a power cut happens in this situation we must not have any outdated fastmap anchor PEB on the device, because that would be used to attach during next boot. The easiest way to make that sure is to erase all outdated fastmap anchor PEBs synchronously during attach. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Richard Weinberger <richard@nod.at> Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: fastmap: Clean up the initialization of pointer pColin Ian King
The pointer p is being initialized with one value and a few lines later being set to a newer replacement value. Clean up the code by using the latter assignment to p as the initial value. Cleans up clang warning: drivers/mtd/ubi/fastmap.c:217:19: warning: Value stored to 'p' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: fastmap: Use kmem_cache_free to deallocate memoryPan Bian
Memory allocated by kmem_cache_alloc() should not be deallocated with kfree(). Use kmem_cache_free() instead. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17ubi: Fix race condition between ubi volume creation and udevClay McClure
Similar to commit 714fb87e8bc0 ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by: Clay McClure <clay@daemons.net> Cc: <stable@vger.kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-01-17mtd: ubi: Use 'max_bad_blocks' to compute bad_peb_limit if availableJeff Westfahl
If the user has not set max_beb_per1024 using either the cmdline or Kconfig options for doing so, use the MTD function 'max_bad_blocks' to compute the UBI bad_peb_limit. Signed-off-by: Jeff Westfahl <jeff.westfahl@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Acked-by: Boris Brezillon <boris.brezillon@free-electron.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-11-15Merge tag 'modules-for-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-09-13UBI: Fix two typos in commentsUwe Kleine-König
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"Colin Ian King
Trivial fix to spelling mistake in ubi_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: pr_err() strings should end with newlinesBen Dooks
In build.c, the following pr_err calls should be terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: pr_err() strings should end with newlinesBen Dooks
In ubi_attach_mtd_dev() the pr_err() calls should have their messgaes terminated with a new-line to avoid other messages being concatenated onto the end. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-09-13ubi: pr_err() strings should end with newlinesBen Dooks
The ubi_init() function has a few error paths that use the pr_err() to output errors. These should have new lines on them as pr_err() does not automatically do this. This fixes issues where if multiple mtd fail to bind to ubi the console output starts wrapping around. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-07-03Merge tag 'driver-core-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big driver core update for 4.13-rc1. The large majority of this is a lot of cleanup of old fields in the driver core structures and their remaining usages in random drivers. All of those fixes have been reviewed by the various subsystem maintainers. There's also some small firmware updates in here, a new kobject uevent api interface that makes userspace interaction easier, and a few other minor things. All of these have been in linux-next for a long while with no reported issues" * tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits) arm: mach-rpc: ecard: fix build error zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO() driver-core: remove struct bus_type.dev_attrs powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type powerpc: vio: use dev_groups and not dev_attrs for bus_type USB: usbip: convert to use DRIVER_ATTR_RW s390: drivers: convert to use DRIVER_ATTR_RO/WO platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW pcmcia: ds: convert to use DRIVER_ATTR_RO wireless: ipw2x00: convert to use DRIVER_ATTR_RW net: ehea: convert to use DRIVER_ATTR_RO net: caif: convert to use DRIVER_ATTR_RO TTY: hvc: convert to use DRIVER_ATTR_RW PCI: pci-driver: convert to use DRIVER_ATTR_WO IB: nes: convert to use DRIVER_ATTR_RW HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups arm: ecard: fix dev_groups patch typo tty: serdev: use dev_groups and not dev_attrs for bus_type sparc: vio: use dev_groups and not dev_attrs for bus_type hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type ...
2017-06-09blk-mq: switch ->queue_rq return value to blk_status_tChristoph Hellwig
Use the same values for use for request completion errors as the return value from ->queue_rq. BLK_STS_RESOURCE is special cased to cause a requeue, and all the others are completed as-is. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09block: introduce new block status code typeChristoph Hellwig
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09mtd: use class_groups instead of class_attrsGreg Kroah-Hartman
The class_attrs pointer is long depreciated, and is about to be finally removed, so move to use the class_groups pointer instead. Cc: Artem Bityutskiy <dedekind1@gmail.com> Acked-by: Richard Weinberger <richard@nod.at> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: <linux-mtd@lists.infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-13Merge tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS updates from Richard Weinberger: - new config option CONFIG_UBIFS_FS_SECURITY - minor improvements - random fixes * tag 'upstream-4.12-rc1' of git://git.infradead.org/linux-ubifs: ubi: Add debugfs file for tracking PEB state ubifs: Fix a typo in comment of ioctl2ubifs & ubifs2ioctl ubifs: Remove unnecessary assignment ubifs: Fix cut and paste error on sb type comparisons ubi: fastmap: Fix slab corruption ubifs: Add CONFIG_UBIFS_FS_SECURITY to disable/enable security labels ubi: Make mtd parameter readable ubi: Fix section mismatch
2017-05-08ubi: Add debugfs file for tracking PEB stateBen Shelton
Add a file under debugfs to allow easy access to the erase count for each physical erase block on an UBI device. This is useful when debugging data integrity issues with UBIFS on NAND flash devices. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> v2: * If ubi_io_is_bad eraseblk_count_seq_show just returns the err. * if ubi->lookuptbl returns null, its no longer treated as an error instead info for that block is not printeded * Removed check for UBI_MAX_ERASECOUNTER since it is impossible to hit * Removed block state from print, if a block is printed then it is good and if it is not printed, then it is bad. v3: * Remove errant ! symbol from if statement checking if erase count is valid. Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08ubi: fastmap: Fix slab corruptionRabin Vincent
Booting with UBI fastmap and SLUB debugging enabled results in the following splats. The problem is that ubi_scan_fastmap() moves the fastmap blocks from the scan_ai (allocated in scan_fast()) to the ai allocated in ubi_attach(). This results in two problems: - When the scan_ai is freed, aebs which were allocated from its slab cache are still in use. - When the other ai is being destroyed in destroy_ai(), the arguments to kmem_cache_free() call are incorrect since aebs on its ->fastmap list were allocated with a slab cache from a differnt ai. Fix this by making a copy of the aebs in ubi_scan_fastmap() instead of moving them. ============================================================================= BUG ubi_aeb_slab_cache (Not tainted): Objects remaining in ubi_aeb_slab_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000080 CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8026c47c>] (slab_err+0x78/0x88) [<8026c47c>] (slab_err) from [<802735bc>] (__kmem_cache_shutdown+0x180/0x3e0) [<802735bc>] (__kmem_cache_shutdown) from [<8024e13c>] (shutdown_cache+0x1c/0x60) [<8024e13c>] (shutdown_cache) from [<8024ed64>] (kmem_cache_destroy+0x19c/0x20c) [<8024ed64>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) INFO: Object 0xb33d7e88 @offset=3720 INFO: Allocated in scan_peb+0x608/0x81c age=72 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c kmem_cache_destroy ubi_aeb_slab_cache: Slab cache still has objects CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8024ed80>] (kmem_cache_destroy+0x1b8/0x20c) [<8024ed80>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) cache_from_obj: Wrong slab cache. ubi_aeb_slab_cache but object is from ubi_aeb_slab_cache ------------[ cut here ]------------ WARNING: CPU: 1 PID: 118 at mm/slab.h:354 kmem_cache_free+0x39c/0x450 Modules linked in: CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80120e40>] (__warn+0xf4/0x10c) [<80120e40>] (__warn) from [<80120f20>] (warn_slowpath_null+0x28/0x30) [<80120f20>] (warn_slowpath_null) from [<80271fe0>] (kmem_cache_free+0x39c/0x450) [<80271fe0>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 2bd8396277fd0a0b ]--- ============================================================================= BUG ubi_aeb_slab_cache (Tainted: G B W ): page slab pointer corrupt. ----------------------------------------------------------------------------- INFO: Allocated in scan_peb+0x608/0x81c age=104 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000081 INFO: Object 0xb33d7e88 @offset=3720 fp=0xb33d7da0 Redzone b33d7e80: cc cc cc cc cc cc cc cc ........ Object b33d7e88: 02 00 00 00 01 00 00 00 00 f0 ff 7f ff ff ff ff ................ Object b33d7e98: 00 00 00 00 00 00 00 00 bd 16 00 00 00 00 00 00 ................ Object b33d7ea8: 00 01 00 00 00 02 00 00 00 00 00 00 00 00 00 00 ................ Redzone b33d7eb8: cc cc cc cc .... Padding b33d7f60: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 1 PID: 118 Comm: ubiattach Tainted: G B W 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80271770>] (free_debug_processing+0x320/0x3c4) [<80271770>] (free_debug_processing) from [<80271ad0>] (__slab_free+0x2bc/0x430) [<80271ad0>] (__slab_free) from [<80272024>] (kmem_cache_free+0x3e0/0x450) [<80272024>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) FIX ubi_aeb_slab_cache: Object at 0xb33d7e88 not freed Signed-off-by: Rabin Vincent <rabinv@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08ubi: Make mtd parameter readableAndy Shevchenko
Fix permissions to allow read mtd parameter back (only for owner). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-08ubi: Fix section mismatchAndy Shevchenko
WARNING: vmlinux.o(.text+0x1f2a80): Section mismatch in reference from the variable __param_ops_mtd to the function .init.text:ubi_mtd_param_parse() The function __param_ops_mtd() references the function __init ubi_mtd_param_parse(). This is often because __param_ops_mtd lacks a __init annotation or the annotation of ubi_mtd_param_parse is wrong. Cc: Richard Weinberger <richard@nod.at> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-05-06Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes and updates from Jens Axboe: "Some fixes and followup features/changes that should go in, in this merge window. This contains: - Two fixes for lightnvm from Javier, fixing problems in the new code merge previously in this merge window. - A fix from Jan for the backing device changes, fixing an issue in NFS that causes a failure to mount on certain setups. - A change from Christoph, cleaning up the blk-mq init and exit request paths. - Remove elevator_change(), which is now unused. From Bart. - A fix for queue operation invocation on a dead queue, from Bart. - A series fixing up mtip32xx for blk-mq scheduling, removing a bandaid we previously had in place for this. From me. - A regression fix for this series, fixing a case where we wait on workqueue flushing from an invalid (non-blocking) context. From me. - A fix/optimization from Ming, ensuring that we don't both quiesce and freeze a queue at the same time. - A fix from Peter on lock ordering for CPU hotplug. Not a real problem right now, but will be once the CPU hotplug rework goes in. - A series from Omar, cleaning up out blk-mq debugfs support, and adding support for exporting info from schedulers in debugfs as well. This is really useful in debugging stalls or livelocks. From Omar" * 'for-linus' of git://git.kernel.dk/linux-block: (28 commits) mq-deadline: add debugfs attributes kyber: add debugfs attributes blk-mq-debugfs: allow schedulers to register debugfs attributes blk-mq: untangle debugfs and sysfs blk-mq: move debugfs declarations to a separate header file blk-mq: Do not invoke queue operations on a dead queue blk-mq-debugfs: get rid of a bunch of boilerplate blk-mq-debugfs: rename hw queue directories from <n> to hctx<n> blk-mq-debugfs: don't open code strstrip() blk-mq-debugfs: error on long write to queue "state" file blk-mq-debugfs: clean up flag definitions blk-mq-debugfs: separate flags with | nfs: Fix bdi handling for cloned superblocks block/mq: Cure cpu hotplug lock inversion lightnvm: fix bad back free on error path lightnvm: create cmd before allocating request blk-mq: don't use sync workqueue flushing from drivers mtip32xx: convert internal commands to regular block infrastructure mtip32xx: cleanup internal tag assumptions block: don't call blk_mq_quiesce_queue() after queue is frozen ...
2017-05-04Merge tag 'char-misc-4.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big set of new char/misc driver drivers and features for 4.12-rc1. There's lots of new drivers added this time around, new firmware drivers from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and a bunch of other driver updates. Nothing major, except if you happen to have the hardware for these drivers, and then you will be happy :) All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits) firmware: google memconsole: Fix return value check in platform_memconsole_init() firmware: Google VPD: Fix return value check in vpd_platform_init() goldfish_pipe: fix build warning about using too much stack. goldfish_pipe: An implementation of more parallel pipe fpga fr br: update supported version numbers fpga: region: release FPGA region reference in error path fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe() mei: drop the TODO from samples firmware: Google VPD sysfs driver firmware: Google VPD: import lib_vpd source files misc: lkdtm: Add volatile to intentional NULL pointer reference eeprom: idt_89hpesx: Add OF device ID table misc: ds1682: Add OF device ID table misc: tsl2550: Add OF device ID table w1: Remove unneeded use of assert() and remove w1_log.h w1: Use kernel common min() implementation uio_mf624: Align memory regions to page size and set correct offsets uio_mf624: Refactor memory info initialization uio: Allow handling of non page-aligned memory regions hangcheck-timer: Fix typo in comment ...
2017-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: tty: fix comment for __tty_alloc_driver() init/main: properly align the multi-line comment init/main: Fix double "the" in comment Fix dead URLs to ftp.kernel.org drivers: Clean up duplicated email address treewide: Fix typo in xml/driver-api/basics.xml tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall" selftests/timers: Spelling s/privledges/privileges/ HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/ net: phy: dp83848: Fix Typo UBI: Fix typos Documentation: ftrace.txt: Correct nice value of 120 priority net: fec: Fix typo in error msg and comment treewide: Fix typos in printk
2017-05-02blk-mq: update ->init_request and ->exit_request prototypesChristoph Hellwig
Remove the request_idx parameter, which can't be used safely now that we support I/O schedulers with blk-mq. Except for a superflous check in mtip32xx it was unused anyway. Also pass the tag_set instead of just the driver data - this allows drivers to avoid some code duplication in a follow on cleanup. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-01Merge branch 'for-4.12/block' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer updates from Jens Axboe: - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ was initially a fork of CFQ, but subsequently changed to implement fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant to be used on desktop type single drives, providing good fairness. From Paolo. - Add Kyber IO scheduler. This is a full multiqueue aware scheduler, using a scalable token based algorithm that throttles IO based on live completion IO stats, similary to blk-wbt. From Omar. - A series from Jan, moving users to separately allocated backing devices. This continues the work of separating backing device life times, solving various problems with hot removal. - A series of updates for lightnvm, mostly from Javier. Includes a 'pblk' target that exposes an open channel SSD as a physical block device. - A series of fixes and improvements for nbd from Josef. - A series from Omar, removing queue sharing between devices on mostly legacy drivers. This helps us clean up other bits, if we know that a queue only has a single device backing. This has been overdue for more than a decade. - Fixes for the blk-stats, and improvements to unify the stats and user windows. This both improves blk-wbt, and enables other users to register a need to receive IO stats for a device. From Omar. - blk-throttle improvements from Shaohua. This provides a scalable framework for implementing scalable priotization - particularly for blk-mq, but applicable to any type of block device. The interface is marked experimental for now. - Bucketized IO stats for IO polling from Stephen Bates. This improves efficiency of polled workloads in the presence of mixed block size IO. - A few fixes for opal, from Scott. - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics. From a variety of folks, mostly Sagi and James Smart. - A series from Bart, improving our exposed info and capabilities from the blk-mq debugfs support. - A series from Christoph, cleaning up how handle WRITE_ZEROES. - A series from Christoph, cleaning up the block layer handling of how we track errors in a request. On top of being a nice cleanup, it also shrinks the size of struct request a bit. - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was never used by platforms, and the latter has outlived it's usefulness. - Various little bug fixes and cleanups from a wide variety of folks. * 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits) block: hide badblocks attribute by default blk-mq: unify hctx delay_work and run_work block: add kblock_mod_delayed_work_on() blk-mq: unify hctx delayed_run_work and run_work nbd: fix use after free on module unload MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler blk-mq-sched: alloate reserved tags out of normal pool mtip32xx: use runtime tag to initialize command header scsi: Implement blk_mq_ops.show_rq() blk-mq: Add blk_mq_ops.show_rq() blk-mq: Show operation, cmd_flags and rq_flags names blk-mq: Make blk_flags_show() callers append a newline character blk-mq: Move the "state" debugfs attribute one level down blk-mq: Unregister debugfs attributes earlier blk-mq: Only unregister hctxs for which registration succeeded blk-mq-debugfs: Rename functions for registering and unregistering the mq directory blk-mq: Let blk_mq_debugfs_register() look up the queue name blk-mq: Register <dev>/queue/mq after having registered <dev>/queue ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset ide-pm: always pass 0 error to __blk_end_request_all ..
2017-03-31blk-mq: constify struct blk_mq_opsEric Biggers
Constify all instances of blk_mq_ops, as they are never modified. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 10:21:45 +0000