summaryrefslogtreecommitdiff
path: root/drivers/mtd/tests
AgeCommit message (Collapse)Author
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 326Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program see the file copying if not write to the free software foundation 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000435.832876118@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: nand: Clarify Kconfig entry for software Hamming ECC entriesMiquel Raynal
The software Hamming ECC correction implementation is referred as MTD_NAND_ECC which is too generic. Rename it MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an SMC quirk in the Hamming implementation as MTD_NAND_ECC_SW_HAMMING_SMC. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Allow selection of ECC byte ordering at runtimeBoris Brezillon
Currently, the selection of ECC byte ordering for software hamming is done at compilation time, which doesn't make sense when ECC byte calculation is done in hardware and byte ordering is forced by the hardware engine. In this case, only the correction is done in software and we want to force the byte-ordering no matter the value of CONFIG_MTD_NAND_ECC_SMC. This is typically the case for the FSMC (Smart Media ordering), TMIO and TXX9NDFMC (regular byte ordering) blocks. For all other use cases (pure software implementation, SM FTL and nandecctest), we keep selecting the byte ordering based on the CONFIG_MTD_NAND_ECC_SMC value. It might not be ideal for SM FTL (I'd expect Smart Media ordering to be employed by the Smart Media FTL), but this option doesn't seem to be enabled in the existing _defconfig, so I can't tell setting sm_order to true is the right choice. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-21mtd: tests: check erase block count in page testStefan Agner
When there is only a single erase block, the cross erase test does not report sensible errors. Warn in case there is only a single erase block instead of executing the test. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-15mtd: Unconditionally update ->fail_addr and ->addr in part_erase()Boris Brezillon
->fail_addr and ->addr can be updated no matter the result of parent->_erase(), we just need to remove the code doing the same thing in mtd_erase_callback() to avoid adjusting those fields twice. Note that this can be done because all MTD users have been converted to not pass an erase_info->callback() and are thus only taking the ->addr_fail and ->addr fields into account after part_erase() has returned. While we're at it, get rid of the erase_info->mtd field which was only needed to let mtd_erase_callback() get the partition device back. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: Stop assuming mtd_erase() is asynchronousBoris Brezillon
None of the mtd->_erase() implementations work in an asynchronous manner, so let's simplify MTD users that call mtd_erase(). All they need to do is check the value returned by mtd_erase() and assume that != 0 means failure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-01-12mtd: mtd_oobtest: Handle bitflips during readsMiquel Raynal
Reads from NAND devices usually trigger bitflips, this is an expected behavior. While bitflips are under a given threshold, the MTD core returns 0. However, when the number of corrected bitflips is above this same threshold, -EUCLEAN is returned to inform the upper layer that this block is slightly dying and soon the ECC engine will be overtaken so actions should be taken to move the data out of it. This particular condition should not be treated like an error and the test should continue. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2018-01-09mtd: tests: nandbiterrs: Fix read_page return valueSascha Hauer
The number of corrected bitflips is not correctly reported by the test until the bitflip threshold is reached. read_page() shall return the number of corrected bitflips, but mtd_read() returns 0 or a negative error, so we can't forward its return value. In the absence of an error we always have calculate the number of bitflips ourselves. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-13mtd: nand: Rename nand.h into rawnand.hBoris Brezillon
We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Peter Pan <peterpandong@micron.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Acked-by: Wenyou Yang <wenyou.yang@microchip.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Han Xu <han.xu@nxp.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-By: Harvey Hunt <harveyhuntnexus@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Halasa <khalasa@piap.pl>
2017-06-08mtd: subpagetest: fix wrong written check in function write_eraseblock2Xiaolei Li
Write size in function write_eraseblock2 is subpgsize * k. It is wrong to check whether written is equal to subpgsize after each mtd_write. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-11mtd: nandbiterrs: Support for NAND biterrors test on platforms without raw writeIwo Mergler
Support for NAND biterrors test on platforms without raw write While the default test mode relies on raw write (mtd_write_oob) to introduce bit errors into a page, the rewrite test mode doesn't need it. Changed the overwrite test to use normal writes. The default test mode is unaffected and still requires raw write as before. Signed-off-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-03-24Merge tag 'for-linus-20160324' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Brian Norris: "NAND: - Add sunxi_nand randomizer support - begin refactoring NAND ecclayout structs - fix pxa3xx_nand dmaengine usage - brcmnand: fix support for v7.1 controller - add Qualcomm NAND controller driver SPI NOR: - add new ls1021a, ls2080a support to Freescale QuadSPI - add new flash ID entries - support bottom-block protection for Winbond flash - support Status Register Write Protect - remove broken QPI support for Micron SPI flash JFFS2: - improve post-mount CRC scan efficiency General: - refactor bcm63xxpart parser, to later extend for NAND - add writebuf size parameter to mtdram Other minor code quality improvements" * tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits) mtd: nand: remove kerneldoc for removed function parameter mtd: nand: Qualcomm NAND controller driver dt/bindings: qcom_nandc: Add DT bindings mtd: nand: don't select chip in nand_chip's block_bad op mtd: spi-nor: support lock/unlock for a few Winbond chips mtd: spi-nor: add TB (Top/Bottom) protect support mtd: spi-nor: add SPI_NOR_HAS_LOCK flag mtd: spi-nor: use BIT() for flash_info flags mtd: spi-nor: disallow further writes to SR if WP# is low mtd: spi-nor: make lock/unlock bounds checks more obvious and robust mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region mtd: spi-nor: wait for SR_WIP to clear on initial unlock mtd: nand: simplify nand_bch_init() usage mtd: mtdswap: remove useless if (!mtd->ecclayout) test mtd: create an mtd_oobavail() helper and make use of it mtd: kill the ecclayout->oobavail field mtd: nand: check status before reporting timeout mtd: bcm63xxpart: give width specifier an 'int', not 'size_t' mtd: mtdram: Add parameter for setting writebuf size mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd' ...
2016-03-07mtd: kill the ecclayout->oobavail fieldBoris BREZILLON
ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-04mtd: nand: tests: fix regression introduced in mtd_nandectestJorge Ramirez-Ortiz
Offending Commit: 6e94119 "mtd: nand: return consistent error codes in ecc.correct() implementations" The new error code was not being handled properly in double bit error detection. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-06mtd: tests: consolidate kmalloc/memset 0 call to kzallocNicholas Mc Guire
This is an API consolidation only. The use of kmalloc + memset to 0 is equivalent to kzalloc. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-26mtd: tests: Replace timeval with ktime_tShraddha Barke
Changes the 32-bit time type timeval to the 64-bit time type ktime_t, since 32-bit systems using struct timeval will break in the year 2038. Correspondingly change do_gettimeofday() to ktime_get() since ktime_get returns a ktime_t, but do_gettimeofday returns a struct timeval.Here, ktime_get() is used instead of ktime_get_real() since ktime_get() uses monotonic clock. Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-27mtd: mtd_oobtest: Fix the address offset with vary_offset caseRoger Quadros
When vary_offset is set (e.g. test case 3), the offset is not always zero so memcmpshow() will show the wrong offset in the print message. To fix this we introduce a new function memcmpshowoffset() which takes offset as a parameter and displays the right offset and use it in the case where offset is non zero. The old memcmpshow() functionality is preserved by converting it into a macro with offset preset to 0. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-05-14mtd: readtest: don't clobber error reportsBrian Norris
Commit 2a6a28e7922c ("mtd: Make MTD tests cancelable") accidentally clobbered any read failure reports. Coverity CID #1296020 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05mtd: Make MTD tests cancelableRichard Weinberger
I always go nuts when I start an MTD test on a slow device and have to wait forever until it finishes. From the debug output I already know what the issue is but I have to wait or reset the board hard. Resetting is often not an option (remote access, you don't want lose the current state, etc...). The solution is easy, check for pending signals at key positions in the code. Using that one can even stop a test by pressing CTRL-C as insmod/modprobe have SIGINT pending. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-04-05mtd: mtd_oobtest: Fix bitflip_limit usage in test case 3Roger Quadros
In test case 3, we set vary_offset to write at different offsets and lengths in the OOB available area. We need to do the bitflip_limit check while checking for 0xff outside the OOB offset + length area that we didn't modify during write. Signed-off-by: Roger Quadros <rogerq@ti.com> [Brian: whitespace fixup] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-03-11mtd: tests: fix more potential integer overflowsBrian Norris
Caught by Coverity (CID #200625 and others) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
2014-12-12mtd: tests: abort torturetest on erase errorsBrian Norris
The torture test should quit once it actually induces an error in the flash. This step was accidentally removed during refactoring. Without this fix, the torturetest just continues infinitely, or until the maximum cycle count is reached. e.g.: ... [ 7619.218171] mtd_test: error -5 while erasing EB 100 [ 7619.297981] mtd_test: error -5 while erasing EB 100 [ 7619.377953] mtd_test: error -5 while erasing EB 100 [ 7619.457998] mtd_test: error -5 while erasing EB 100 [ 7619.537990] mtd_test: error -5 while erasing EB 100 ... Fixes: 6cf78358c94f ("mtd: mtd_torturetest: use mtd_test helpers") Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: <stable@vger.kernel.org>
2014-11-20mtd: oobtest: correct printf() format specifier for 'size_t'Brian Norris
Fixes warning: drivers/mtd/tests/oobtest.c: In function 'memcmpshow': drivers/mtd/tests/oobtest.c:129: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'size_t' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Sekhar Nori <nsekhar@ti.com>
2014-11-19mtd: mtd_oobtest: add bitflip_limit parameterRoger Quadros
It is common for NAND devices to have bitflip errors. Add a bitflip_limit parameter to specify how many bitflips per page we can tolerate without flagging an error. By default zero bitflips are tolerated. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-19mtd: mtd_oobtest: Show the verification error location and dataRoger Quadros
Add a function memcmpshow() that compares the 2 data buffers and shows the address:offset and data bytes on comparison failure. This function does not break at a comparison failure but runs the check for the whole data buffer. Use memcmpshow() instead of memcmp() for all the verification paths. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-08-19mtd: tests: fix integer overflow issuesBrian Norris
These multiplications are done with 32-bit arithmetic, then converted to 64-bit. We should widen the integers first to prevent overflow. This could be a problem for large (>4GB) MTD's. Detected by Coverity. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Akinobu Mita <akinobu.mita@gmail.com>
2014-04-17mtd: mtd_oobtest: generate consistent data for verificationAkinobu Mita
mtd_oobtest writes OOB, read it back and verify. The verification is not correctly done if oobsize is not multiple of 4. Although the data to be written and the data to be compared are generated by several prandom_byte_state() calls starting with the same seed, these two are generated with the different size and different number of calls. Due to the implementation of prandom_byte_state() if the size on each call is not multiple of 4, the resulting data is not always same. This fixes it by just calling prandom_byte_state() once and using correct range instead of calling it multiple times for each. Reported-by: George Cherian <george.cherian@ti.com> Reported-by: Lothar Waßmann <LW@KARO-electronics.de> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: George Cherian <george.cherian@ti.com> Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-03-10mtd: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> [Brian: dropped one incorrect hunk] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: tests: mtd_nandecctest: Use IS_ENABLED() macroFabio Estevam
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-27mtd: nand: add a helper to detect the nand typeHuang Shijie
This helper detects that whether the mtd's type is nand type. Now, it's clear that the MTD_NANDFLASH stands for SLC nand only. So use the mtd_type_is_nand() to replace the old check method to do the nand type (include the SLC and MLC) check. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-08-30mtd: tests: incorporate error message for mtdtest_write()Akinobu Mita
All callers of mtdtest_write() print the same error message on failure. This incorporates the error message to mtdtest_write() and removes them from the callers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: tests: incorporate error message for mtdtest_read()Akinobu Mita
All callers of mtdtest_read() print the same error message on failure. This incorporates the error message to mtdtest_read() and removes them from the callers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_nandbiterrs: use mtd_test helpersAkinobu Mita
Use mtdtest_write() and mtdtest_erase_eraseblock() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Iwo Mergler <Iwo.Mergler@netcommwireless.com.au> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_torturetest: use mtd_test helpersAkinobu Mita
Use mtdtest_scan_for_bad_eraseblocks() and mtdtest_erase_good_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_subpagetest: use mtd_test helpersAkinobu Mita
Use mtdtest_scan_for_bad_eraseblocks() and mtdtest_erase_good_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_stresstest: use mtd_test helpersAkinobu Mita
Use mtdtest_read(), mtdtest_write(), mtdtest_erase_eraseblock(), and mtdtest_scan_for_bad_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_speedtest: use mtd_test helpersAkinobu Mita
Use mtdtest_write(), mtdtest_read(), mtdtest_scan_for_bad_eraseblocks(), mtdtest_erase_good_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_readtest: use mtd_test helpersAkinobu Mita
Use mtdtest_read() and mtdtest_scan_for_bad_eraseblocks() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_pagetest: use mtd_test helpersAkinobu Mita
Use mtdtest_write(), mtdtest_read(), mtdtest_erase_eraseblock(), mtdtest_scan_for_bad_eraseblocks(), and mtdtest_erase_good_eraseblocks() in mtd_test helpers. [dwmw2: merge later 'remove always true condition' fix] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: mtd_oobtest: use mtd_test helpersAkinobu Mita
Use mtdtest_scan_for_bad_eraseblocks(), mtdtest_erase_good_eraseblocks(), and mtdtest_erase_eraseblock() in mtd_test helpers. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: tests: rename sources in order to link a helper objectAkinobu Mita
Each mtd test module have a single source whose name is the same as the module name. In order to link a single object including helper functions to every test module, this rename these sources to the different names. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-30mtd: tests: introduce helper functionsAkinobu Mita
This introduces the helper functions which can be used by several mtd/tests modules. The following three functions are used all over the test modules. - mtdtest_erase_eraseblock() - mtdtest_scan_for_bad_eraseblocks() - mtdtest_erase_good_eraseblocks() The following are wrapper functions for mtd_read() and mtd_write() which can simplify the return value check. - mtdtest_read() - mtdtest_write() All helpers are put into a single .c file and it will be linked to every test module later. The code will actually be copied to every test module, but it is fine for our small test infrastructure. [dwmw2: merge later 'return -EIO when mtdtest_read() failed' fix] Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Vikram Narayanan <vikram186@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: tests: don't print error messages when out-of-memoryBrian Norris
These strings are now unnecessary and discouraged in the kernel. The kernel will have plenty of big scary messages if kmalloc fails. These now only serve to bloat the module. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-03-02Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 11:40:08 +0000