summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/brcmnand/brcmnand.c
AgeCommit message (Collapse)Author
2021-03-28mtd: rawnand: brcmnand: move to polling in pio mode on oops writeKamal Dasu
This change makes sure that Broadcom NAND driver moves to interrupt polling on the first brcmnand_write() call. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210311170909.9031-2-kdasu.kdev@gmail.com
2021-03-28mtd: rawnand: brcmnand: read/write oob during EDU transferKamal Dasu
Added support to read/write oob during EDU transfers. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210311170909.9031-1-kdasu.kdev@gmail.com
2021-03-11mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECCÁlvaro Fernández Rojas
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
2020-11-20mtd: rawnand: brcmnand: Demote non-conformant kernel-doc headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'host' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'addr' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'buf' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'len' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'cmd' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'host' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'desc' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'addr' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'buf' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'len' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'dma_cmd' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'begin' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'end' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'next_desc' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1977: warning: Function parameter or member 'host' not described in 'brcmnand_dma_run' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1977: warning: Function parameter or member 'desc' not described in 'brcmnand_dma_run' Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-14-lee.jones@linaro.org
2020-09-28mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevantMiquel Raynal
Instead of accessing ->strength/step_size directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Use the new ECC engine type enumerationMiquel Raynal
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
2020-08-27mtd: rawnand: Rename the ECC algorithm enumeration itemsMiquel Raynal
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-3-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: brcmnand: ECC error handling on EDU transfersKamal Dasu
Implement ECC correctable and uncorrectable error handling for EDU reads. If ECC correctable bitflips are encountered on EDU transfer, read page again using PIO. This is needed due to a NAND controller limitation where corrected data is not transferred to the DMA buffer on ECC error. This applies to ECC correctable errors that are reported by the controller hardware based on set number of bitflips threshold in the controller threshold register, bitflips below the threshold are corrected silently and are not reported by the controller hardware. Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200612212902.21347-3-kdasu.kdev@gmail.com
2020-06-26mtd: rawnand: brcmnand: Don't default to edu transferKamal Dasu
When flash-dma is absent do not default to using flash-edu. Make sure flash-edu is enabled before setting EDU transfer function. Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200612212902.21347-2-kdasu.kdev@gmail.com
2020-06-01Merge tag 'nand/for-5.8' of ↵Richard Weinberger
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND core changes: * Stop using nand_release(), patched all drivers. * Give more information about the ECC weakness when not matching the chip's requirement. * MAINTAINERS updates. * Support emulated SLC mode on MLC NANDs. * Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. * Take check_only into account. * Add an invalid ECC mode to discriminate with valid ones. * Return an enum from of_get_nand_ecc_algo(). * Drop OOB_FIRST placement scheme. * Introduce nand_extract_bits(). * Ensure a consistent bitflips numbering. * BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. * Fix nand_gpio_waitrdy(). * Propage CS selection to sub operations. * Add a NAND_NO_BBM_QUIRK flag. * Give the possibility to verify a read operation is supported. * Add a helper to check supported operations. * Avoid indirect access to ->data_buf(). * Rename the use_bufpoi variables. * Fix comments about the use of bufpoi. * Rename a NAND chip option. * Reorder the nand_chip->options flags. * Translate obscure bitfields into readable macros. * Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: * Fixed many error paths. * Arasan - New driver * Au1550nd: - Various cleanups - Migration to ->exec_op() * brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. * Cadence - Make cadence_nand_attach_chip static. * Cafe: - Set the NAND_NO_BBM_QUIRK flag * cmx270: - Remove this controller driver. * cs553x: - Misc cleanup - Migration to ->exec_op() * Davinci: - Misc cleanup. - Migration to ->exec_op() * Denali: - Add more delays before latching incoming data * Diskonchip: - Misc cleanup - Migration to ->exec_op() * Fsmc: - Change to non-atomic bit operations. * GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. * Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. * Marvell: - Misc cleanup and small fixes * Nandsim: - Fix the error paths, driver wide. * Omap_elm: - Fix runtime PM imbalance. * STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes).
2020-05-31mtd: rawnand: brcmnand: support v2.1-v2.2 controllersÁlvaro Fernández Rojas
v2.1: tested on Netgear DGND3700v1 (BCM6368) v2.2: tested on Netgear DGND3700v2 (BCM6362) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-6-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: rename page sizesÁlvaro Fernández Rojas
Current pages sizes apply to controllers after v3.4 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-4-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: fix CS0 layoutÁlvaro Fernández Rojas
Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: rename v4 registersÁlvaro Fernández Rojas
These registers are also used on v3.3. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-2-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: Stop using nand_release()Miquel Raynal
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Let's stop using nand_release() by calling mtd_device_unregister() and nand_cleanup() directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-5-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: brcmnand: correctly verify erased pagesÁlvaro Fernández Rojas
The current code checks that the whole OOB area is erased. This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will fail due to the usable OOB bytes not being 0xff. Correct this by only checking that data and ECC bytes aren't 0xff. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com
2020-05-24mtd: rawnand: brcmnand: improve hamming oob layoutÁlvaro Fernández Rojas
The current code generates 8 oob sections: S1 1-5 ECC 6-8 S2 9-15 S3 16-21 ECC 22-24 S4 25-31 S5 32-37 ECC 38-40 S6 41-47 S7 48-53 ECC 54-56 S8 57-63 Change it by merging continuous sections: S1 1-5 ECC 6-8 S2 9-21 ECC 22-24 S3 25-37 ECC 38-40 S4 41-53 ECC 54-56 S5 57-63 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-3-noltari@gmail.com
2020-05-24mtd: rawnand: brcmnand: fix hamming oob layoutÁlvaro Fernández Rojas
First 2 bytes are used in large-page nand. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Cc: stable@vger.kernel.org Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-2-noltari@gmail.com
2020-05-19mtd:rawnand: brcmnand: Fix PM resume crashKamal Dasu
This change fixes crash observed on PM resume. This bug was introduced in the change made for flash-edu support. Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-05-11mtd: rawnand: Rename a NAND chip optionMiquel Raynal
NAND controller drivers can set the NAND_USE_BOUNCE_BUFFER flag to a chip 'option' field. With this flag, the core is responsible of providing DMA-able buffers. The current behavior is to not force the use of a bounce buffer when the core thinks this is not needed. So in the end the name is a bit misleading, because in theory we will always have a DMA buffer but in practice it will not always be a bounce buffer. Rename this flag NAND_USES_DMA to be more accurate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-4-miquel.raynal@bootlin.com
2020-05-10mtd: rawnand: brcmnand: Remove unused including <linux/version.h>YueHaibing
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200417101129.35556-1-yuehaibing@huawei.com
2020-03-11mtd: rawnand: brcmnand: Add support for flash-edu for dma transfersKamal Dasu
Legacy mips soc platforms that have controller v5.0 and 6.0 use flash-edu block for dma transfers. This change adds support for nand dma transfers using the EDU block. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200122213313.35820-4-kdasu.kdev@gmail.com
2020-01-21mtd: rawnand: brcmnand: Set appropriate DMA maskFlorian Fainelli
NAND controllers >= 7.0 with FLASH_DMA support physical addresses up to 40-bit, set an appropriate DMA mask for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: rawnand: brcmnand: Fix NULL pointer assignmentFlorian Fainelli
Sparse complained about the following: drivers/mtd/nand/raw/brcmnand/brcmnand.c:921:40: warning: Using plain integer as NULL pointer fix this issue by assigning the pointer to NULL. Fixes: c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mtd: nand: brcmnand: Add support for flash-dma v0Kamal Dasu
This change adds support for flash dma v0.0. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-29mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfipsClaire Lin
In brcmstb_nand_verify_erased_page(), the ECC chunk pointer calculation while correcting erased page bitflips is wrong, fix it. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Claire Lin <claire.lin@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Add support for v7.3 controllerKamal Dasu
This change adds support for brcm NAND v7.3 controller. This controller uses a newer version of flash_dma engine and change mostly implements these differences. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu
Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: When oops in progress use pio and interrupt pollingKamal Dasu
If mtd_oops is in progress, switch to polling during NAND command completion instead of relying on DMA/interrupts so that the mtd_oops buffer can be completely written in the assigned NAND partition. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: fallback to detected ecc-strength, ecc-step-sizeKamal Dasu
This change supports nand-ecc-step-size and nand-ecc-strength fields in brcmnand DT node to be optional. see: Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt If both nand-ecc-strength and nand-ecc-step-size are not specified in device tree node for NAND, raw NAND layer does detect ECC information by reading ONFI extended parameter page for parts using ONFI >= 2.1. In case of non-ONFI NAND parts there could be a nand_id table entry with ECC information. If there is valid device tree entry for nand-ecc-strength and nand-ecc-step-size fields it still shall override the detected values. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Fix BCH ECC layout for large page NAND partsKamal Dasu
The way oobregion->offset is derived for large page NAND parts is wrong, fixes it. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-08mtd: rawnand: Provide a helper to get chip->data_bufBoris Brezillon
We plan to move cache related fields to a pagecache struct in nand_chip but some drivers access ->pagebuf directly to invalidate the cache before they start using ->data_buf. Let's provide an helper that returns a pointer to ->data_buf after invalidating the cache. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2018-10-03mtd: rawnand: Deprecate ->dev_ready() and ->waitfunc()Boris Brezillon
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->cmd_ctrl() and ->cmdfunc()Boris Brezillon
Those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{read, write}_{byte, buf}() hooksBoris Brezillon
All those hooks have been replaced by ->exec_op(). Move them to the nand_legacy struct. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Leave chip->IO_ADDR_{R, W} to NULL when unusedBoris Brezillon
There's no point in poisoning the ->IO_ADDR_{R,W}, a NULL pointer is just as good to detect unexpected ->IO_ADDR_{R,W} usage. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->waitfunc()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->waitfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmdfunc()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmdfunc() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->cmd_ctrl()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle the chip->cmd_ctrl() hook. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->write_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to chip->read_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all chip->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->write_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->write_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to ecc->read_xxx() hooksBoris Brezillon
Let's make the raw NAND API consistent by patching all helpers and hooks to take a nand_chip object instead of an mtd_info one or remove the mtd_info object when both are passed. Let's tackle all ecc->read_xxx() hooks at once. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Pass a nand_chip object to nand_scan()Boris Brezillon
Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. We start with nand_scan(). Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-31mtd: rawnand: brcmnand: convert driver to nand_scan()Miquel Raynal
Two helpers have been added to the core to do all kind of controller side configuration/initialization between the detection phase and the final NAND scan. Implement these hooks so that we can convert the driver to just use nand_scan() instead of the nand_scan_ident() + nand_scan_tail() pair. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-07-31mtd: rawnand: better name for the controller structureMiquel Raynal
In the raw NAND core, a NAND chip is described by a nand_chip structure, while a NAND controller is described with a nand_hw_control structure which is not very meaningful. Rename this structure nand_controller. As the structure gets renamed, it is logical to also rename the core function initializing it from nand_hw_control_init() to nand_controller_init(). Lastly, the 'hwcontrol' entry of the nand_chip structure is not meaningful neither while it has the role of fallback when no controller structure is provided by the driver (the controller driver is dumb and can only control a single chip). Thus, it is renamed dummy_controller. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: brcmnand: fix probe function error pathMiquel Raynal
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-02-16mtd: nand: move raw NAND related code to the raw/ subdirBoris Brezillon
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 07:50:30 +0000