summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices
AgeCommit message (Collapse)Author
2021-06-11mtd: devices: add support for microchip 48l640 EERAMHeiko Schocher
The Microchip 48l640 is a 8KByte EERAM connected via SPI. Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Fabio Estevam <festevam@denx.de> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210607033909.1424605-3-hs@denx.de
2021-05-26mtd: devices: Remove superfluous "break"Ding Senjie
Remove superfluous "break", as there is a "return" before it. Signed-off-by: Ding Senjie <dingsenjie@yulong.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210514124451.20352-1-dingsenjie@163.com
2021-05-10mtd: phram: Fix error return code in phram_setup()Yu Kuai
Return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210408133812.1209798-1-yukuai3@huawei.com
2021-04-16mtd: core: Constify buf in mtd_write_user_prot_reg()Tudor Ambarus
The write buffer comes from user and should be const. Constify write buffer in mtd core and across all _write_user_prot_reg() users. cfi_cmdset_{0001, 0002} and onenand_base will pay the cost of an explicit cast to discard the const qualifier since the beginning, since they are using an otp_op_t function prototype that is used for both reads and writes. mtd_dataflash and SPI NOR will benefit of the const buffer because they are using different paths for writes and reads. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210403060931.7119-1-tudor.ambarus@microchip.com
2021-02-01mtd: st_spi_fsm: convert comma to semicolonZheng Yongjun
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210108092325.19037-1-zhengyongjun3@huawei.com
2021-01-27mtd: phram: use div_u64_rem to stop overwrite len in phram_setupyangerkun
We now support user to set erase page size, and use do_div between len and erase size to determine the reasonableness for the erase size. However, do_div is a macro and will overwrite the value of len. Which results a mtd device with unexcepted size. Fix it by use div_u64_rem. Fixes: ffad560394de ("mtd: phram: Allow the user to set the erase page size.") Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210125124936.651812-1-yangerkun@huawei.com
2020-12-07mtd: phram: Allow the user to set the erase page size.Patrick O'Grady
Permit the user to specify the erase page size as a parameter. This solves two problems: - phram can access images made by mkfs.jffs2. mkfs.jffs2 won't create images with erase sizes less than 8KiB; many architectures define PAGE_SIZE as 4KiB. - Allows more effective use of small capacity devices. JFFS2 needs somewhere between 2 and 5 empty pages for garbage collection; and for an NVRAM part with only 32KiB of space, a smaller erase page allows much better utilization in applications where garbage collection is important. Signed-off-by: Patrick O'Grady <patrick@baymotion.com> Reviewed-by: Joern Engel <joern@logfs.org> Link: https://lore.kernel.org/lkml/CAJ7m5OqYv_=JB9NhHsqBsa8YU0DFRoP7C+W10PY22wonAGJK=A@mail.gmail.com/ [Guohua Zhong: fix token array index out of bounds and update patch for kernel master branch] Signed-off-by: Guohua Zhong <zhongguohua1@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201207095529.20896-1-zhongguohua1@huawei.com
2020-11-20mtd: devices: powernv_flash: Add function names to headers and fix 'dev'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/mtd/devices/powernv_flash.c:129: warning: Cannot understand * @mtd: the device drivers/mtd/devices/powernv_flash.c:145: warning: Cannot understand * @mtd: the device drivers/mtd/devices/powernv_flash.c:161: warning: Cannot understand * @mtd: the device drivers/mtd/devices/powernv_flash.c:184: warning: Function parameter or member 'dev' not described in 'powernv_flash_set_driver_info' Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-mtd@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-24-lee.jones@linaro.org
2020-11-20mtd: devices: docg3: Fix kernel-doc 'bad line' and 'excessive doc' issuesLee Jones
This patch also places the descriptions in the correct order. Fixes the following W=1 kernel build warning(s): drivers/mtd/devices/docg3.c:819: warning: bad line: drivers/mtd/devices/docg3.c:1799: warning: Excess function parameter 'base' description in 'doc_probe_device' Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-5-lee.jones@linaro.org
2020-11-20mtd: devices: phram: File headers are not good candidates for kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/mtd/devices/phram.c:19: warning: Function parameter or member 'fmt' not described in 'pr_fmt' Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: "Jochen Schäuble" <psionic@psionic.de> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-3-lee.jones@linaro.org
2020-10-02mtd: spear_smi: Enable compile testingMiquel Raynal
This driver does not contain any architecture specific code, enable compile testing it. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200928155715.14370-1-miquel.raynal@bootlin.com
2020-09-15mtd: spear_smi: use for_each_child_of_node() macroQinglang Miao
Use for_each_child_of_node() macro instead of open coding it. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200914061324.3230-1-miaoqinglang@huawei.com
2020-08-27mtd: Avoid comma separated statementsJoe Perches
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/ae92f4c0507c470d9461886410dc7030192f9014.1598331149.git.joe@perches.com
2020-05-24lib/bch: Allow easy bit swappingMiquel Raynal
It seems that several hardware ECC engine use a swapped representation of bytes compared to software. This might having to do with how the ECC engine is wired to the NAND controller or the order the bits are passed to the hardware BCH logic. This means that when the software BCH engine is working in conjunction with data generated with hardware, sometimes we might need to swap the bits inside bytes, eg: 0x0A = b0000_1010 -> b0101_0000 = 0x50 Make it possible by adding a boolean to the BCH initialization routine. Regarding the implementation itself, this is a rather simple approach that can probably be enhanced in the future by preparing the ->a_{mod,pow}_tab tables with the swapping in mind. Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-3-miquel.raynal@bootlin.com
2020-05-24lib/bch: Rework a little bit the exported function namesMiquel Raynal
There are four exported functions, all suffixed by _bch, which is clearly not the norm. Let's rename them by prefixing them with bch_ instead. This is a mechanical change: init_bch -> bch_init free_bch -> bch_free encode_bch -> bch_encode decode_bch -> bch_decode Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-2-miquel.raynal@bootlin.com
2020-03-30mtd: Convert fallthrough comments into statementsMiquel Raynal
Use Joe Perches cvt_fallthrough.pl script to convert /* fallthrough */ comments (and its derivatives) into a fallthrough; statement. This automatically drops useless ones. Do it MTD-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200325212115.14170-1-miquel.raynal@bootlin.com
2020-03-24mtd: phram: fix a double free issue in error pathWen Yang
The variable 'name' is released multiple times in the error path, which may cause double free issues. This problem is avoided by adding a goto label to release the memory uniformly. And this change also makes the code a bit more cleaner. Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com
2020-01-30Merge tag 'mtd/for-5.6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core - block2mtd: page index should use pgoff_t - maps: physmap: minimal Runtime PM support - maps: pcmciamtd: avoid possible sleep-in-atomic-context bugs - concat: Fix a comment referring to an unknown symbol Raw NAND: - Macronix: Use match_string() helper - Atmel: switch to using devm_fwnode_gpiod_get() - Denali: rework the SKIP_BYTES feature and add reset controlling - Brcmnand: set appropriate DMA mask - Cadence: add unspecified HAS_IOMEM dependency - Various cleanup. Onenand: - Rename Samsung and Omap2 drivers to avoid possible build warnings - Enable compile testing - Various build issues - Kconfig cleanup SPI-NAND: - Support for Toshiba TC58CVG2S0HRAIJ SPI-NOR: - Add support for TB selection using SR bit 6, - Add support for few flashes" * tag 'mtd/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (41 commits) mtd: concat: Fix a comment referring to an unknown symbol mtd: rawnand: add unspecified HAS_IOMEM dependency mtd: block2mtd: page index should use pgoff_t mtd: maps: physmap: Add minimal Runtime PM support mtd: maps: pcmciamtd: fix possible sleep-in-atomic-context bugs in pcmciamtd_set_vpp() mtd: onenand: Rename omap2 driver to avoid a build warning mtd: onenand: Use a better name for samsung driver mtd: rawnand: atmel: switch to using devm_fwnode_gpiod_get() mtd: spinand: add support for Toshiba TC58CVG2S0HRAIJ mtd: rawnand: macronix: Use match_string() helper to simplify the code mtd: sharpslpart: Fix unsigned comparison to zero mtd: onenand: Enable compile testing of OMAP and Samsung drivers mtd: onenand: samsung: Fix printing format for size_t on 64-bit mtd: onenand: samsung: Fix pointer cast -Wpointer-to-int-cast warnings on 64 bit mtd: rawnand: denali: remove hard-coded DENALI_DEFAULT_OOB_SKIP_BYTES mtd: rawnand: denali_dt: add reset controlling dt-bindings: mtd: denali_dt: document reset property mtd: rawnand: denali_dt: Add support for configuring SPARE_AREA_SKIP_BYTES mtd: rawnand: denali_dt: error out if platform has no associated data mtd: rawnand: brcmnand: Set appropriate DMA mask ...
2020-01-27mtd: block2mtd: page index should use pgoff_tLiu Song
Page index use pgoff_t to prevent risk of truncation. Signed-off-by: Liu Song <liu.song11@zte.com.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2019-11-14mtd: devices: fix mchp23k256 read and writeAngelo Dureghello
Due to the use of sizeof(), command size set for the spi transfer was wrong. Driver was sending and receiving always 1 byte less and especially on write, it was hanging. echo -n -e "\\x1\\x2\\x3\\x4" > /dev/mtd1 And read part too now works as expected. hexdump -C -n16 /dev/mtd1 00000000 01 02 03 04 ab f3 ad c2 ab e3 f4 36 dd 38 04 15 00000010 Fixes: 4379075a870b ("mtd: mchp23k256: Add support for mchp23lcv1024") Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-29mtd: spear_smi: Fix Write Burst modeMiquel Raynal
Any write with either dd or flashcp to a device driven by the spear_smi.c driver will pass through the spear_smi_cpy_toio() function. This function will get called for chunks of up to 256 bytes. If the amount of data is smaller, we may have a problem if the data length is not 4-byte aligned. In this situation, the kernel panics during the memcpy: # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6 spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256 spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256 spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256 spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233 Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8 [...] PC is at memcpy+0xcc/0x330 The above error occurs because the implementation of memcpy_toio() tries to optimize the number of I/O by writing 4 bytes at a time as much as possible, until there are less than 4 bytes left and then switches to word or byte writes. Unfortunately, the specification states about the Write Burst mode: "the next AHB Write request should point to the next incremented address and should have the same size (byte, half-word or word)" This means ARM architecture implementation of memcpy_toio() cannot reliably be used blindly here. Workaround this situation by update the write path to stick to byte access when the burst length is not multiple of 4. Fixes: f18dbbb1bfe0 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-10-08mtd: st_spi_fsm: remove unused field from struct stfsmBartosz Golaszewski
The 'region' field in struct stfsm is unused and can be removed. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-08mtd: spear_smi: remove set but not used variable 'flash_info'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/devices/spear_smi.c: In function spear_smi_probe_config_dt: drivers/mtd/devices/spear_smi.c:780:32: warning: variable flash_info set but not used [-Wunused-but-set-variable] It is not used since commit 6551ab5d30d6 ("mtd: add device-tree support to spear_smi") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-08mtd: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-09-15mtd: pmc551: Remove set but not used variable 'soff_lo'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/devices/pmc551.c: In function pmc551_erase: drivers/mtd/devices/pmc551.c:142:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] drivers/mtd/devices/pmc551.c: In function pmc551_read: drivers/mtd/devices/pmc551.c:232:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] drivers/mtd/devices/pmc551.c: In function pmc551_write: drivers/mtd/devices/pmc551.c:289:15: warning: variable soff_lo set but not used [-Wunused-but-set-variable] It is not used since commit cdf0a7d16980 ("[MTD] pmc551 whitespace cleanup") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15mtd: phram: Module parameters add writable permissionsXiaoming Ni
The phram code implements managing multiple devices through a linked list. However, due to the module parameter permission of 0, the /sys/module/phram/parameters/phram interface is missing. The command line arguments in insmod can only create one device. Therefore, add writable permissions to the module parameters, create /sys/module/phram/parameters/phram interface, and create multi-device support. Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-08-12mtd: spi-nor: Move m25p80 code in spi-nor.cBoris Brezillon
The m25p80 driver is actually a generic wrapper around the spi-mem layer. Not only the driver name is misleading, but we'd expect such a common logic to be directly available in the core. Another reason for moving this code is that SPI NOR controller drivers should progressively be replaced by SPI controller drivers implementing the spi_mem_ops interface, and when the conversion is done, we should have a single spi-nor driver directly interfacing with the spi-mem layer. While moving the code we also fix a longstanding issue when non-DMA-able buffers are passed by the MTD layer. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
2019-06-14docs: kbuild: convert docs to ReST and rename to *.rstMauro Carvalho Chehab
The kbuild documentation clearly shows that the documents there are written at different times: some use markdown, some use their own peculiar logic to split sections. Convert everything to ReST without affecting too much the author's style and avoiding adding uneeded markups. The conversion is actually: - add blank lines and identation in order to identify paragraphs; - fix tables markups; - add some lists markups; - mark literal blocks; - adjust title markups. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 420Thomas Gleixner
Based on 1 normalized pattern(s): this code is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 6 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.627158185@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 380Thomas Gleixner
Based on 1 normalized pattern(s): license as part of this driver was derived from the slram c driver it falls under the same license which is gnu general public license v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081037.083494189@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-06mtd: phram: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/mtd/devices/phram.c: In function ‘parse_num64’: drivers/mtd/devices/phram.c:149:11: warning: this statement may fall through [-Wimplicit-fallthrough=] shift += 10; ~~~~~~^~~~~ drivers/mtd/devices/phram.c:150:4: note: here case 'M': ^~~~ drivers/mtd/devices/phram.c:151:11: warning: this statement may fall through [-Wimplicit-fallthrough=] shift += 10; ~~~~~~^~~~~ drivers/mtd/devices/phram.c:152:4: note: here case 'k': ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-04-18mtd: nand: Clarify Kconfig entry for software BCH ECC algorithmMiquel Raynal
There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-04Merge tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD updates from Boris Brezillon: "Core MTD changes: - Use struct_size() where appropriate - mtd_{read,write}() as wrappers around mtd_{read,write}_oob() - Fix misuse of PTR_ERR() in docg3 - Coding style improvements in mtdcore.c SPI NOR changes: Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask - Add Tudor as SPI-NOR co-maintainer NAND changes: NAND core changes: - Fourth batch of fixes/cleanup to the raw NAND core impacting various controller drivers (Sunxi, Marvell, MTK, TMIO, OMAP2). - Check the return code of nand_reset() and nand_readid_op(). - Remove ->legacy.erase and single_erase(). - Simplify the locking. - Several implicit fall through annotations. Raw NAND controllers drivers changes: - Fix various possible object reference leaks (MTK, JZ4780, Atmel) - ST: * Add support for STM32 FMC2 NAND flash controller - Meson: * Add support for Amlogic NAND flash controller - Denali: * Several cleanup patches - Sunxi: * Several cleanup patches - FSMC: * Disable NAND on remove() * Reset NAND timings on resume() SPI-NAND drivers changes: - Toshiba: * Add support for all Toshiba products. - Macronix: * Fix ECC status read. - Gigadevice: * Add support for GD5F1GQ4UExxG" * tag 'mtd/for-5.1' of git://git.infradead.org/linux-mtd: (64 commits) mtd: spi-nor: Fix wrong abbreviation HWCPAS mtd: spi-nor: cadence-quadspi: fix spelling mistake: "Couldnt't" -> "Couldn't" mtd: spi-nor: Add support for en25qh64 mtd: spi-nor: Add support for MX25V8035F mtd: spi-nor: Add support for EN25Q80A mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC mtd: spi-nor: split s25fl128s into s25fl128s0 and s25fl128s1 mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode mtd: spi-nor: Add support for mx25u3235f mtd: rawnand: denali_dt: remove single anonymous clock support mtd: rawnand: mtk: fix possible object reference leak mtd: rawnand: jz4780: fix possible object reference leak mtd: rawnand: atmel: fix possible object reference leak mtd: rawnand: fsmc: Disable NAND on remove() mtd: rawnand: fsmc: Reset NAND timings on resume() mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG mtd: rawnand: denali: remove unused dma_addr field from denali_nand_info mtd: rawnand: denali: remove unused function argument 'raw' mtd: rawnand: denali: remove unneeded denali_reset_irq() call ...
2019-02-25Merge tag 'spi-nor/for-5.1' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
SPI NOR Changes Core changes: - Add support of octal mode I/O transfer - Add a bunch of SPI NOR entries to the flash_info table SPI NOR controller driver changes: - cadence-quadspi: * Add support for Octal SPI controller * write upto 8-bytes data in STIG mode - mtk-quadspi: * rename config to a common one * add SNOR_HWCAPS_READ to spi_nor_hwcaps mask MAINTAINERS: - Add Tudor as SPI-NOR co-maintainer
2019-02-13mtd: powernv_flash: Fix device registration errorAneesh Kumar K.V
This change helps me to get multiple mtd device registered. Without this I get sysfs: cannot create duplicate filename '/bus/nvmem/devices/flash0' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.0.0-rc2-00557-g1ef20ef21f22 #13 Call Trace: [c0000000b38e3220] [c000000000b58fe4] dump_stack+0xe8/0x164 (unreliable) [c0000000b38e3270] [c0000000004cf074] sysfs_warn_dup+0x84/0xb0 [c0000000b38e32f0] [c0000000004cf6c4] sysfs_do_create_link_sd.isra.0+0x114/0x150 [c0000000b38e3340] [c000000000726a84] bus_add_device+0x94/0x1e0 [c0000000b38e33c0] [c0000000007218f0] device_add+0x4d0/0x830 [c0000000b38e3480] [c0000000009d54a8] nvmem_register.part.2+0x1c8/0xb30 [c0000000b38e3560] [c000000000834530] mtd_nvmem_add+0x90/0x120 [c0000000b38e3650] [c000000000835bc8] add_mtd_device+0x198/0x4e0 [c0000000b38e36f0] [c00000000083619c] mtd_device_parse_register+0x11c/0x280 [c0000000b38e3780] [c000000000840830] powernv_flash_probe+0x180/0x250 [c0000000b38e3820] [c00000000072c120] platform_drv_probe+0x60/0xf0 [c0000000b38e38a0] [c0000000007283c8] really_probe+0x138/0x4d0 [c0000000b38e3930] [c000000000728acc] driver_probe_device+0x13c/0x1b0 [c0000000b38e39b0] [c000000000728c7c] __driver_attach+0x13c/0x1c0 [c0000000b38e3a30] [c000000000725130] bus_for_each_dev+0xa0/0x120 [c0000000b38e3a90] [c000000000727b2c] driver_attach+0x2c/0x40 [c0000000b38e3ab0] [c0000000007270f8] bus_add_driver+0x228/0x360 [c0000000b38e3b40] [c00000000072a2e0] driver_register+0x90/0x1a0 [c0000000b38e3bb0] [c00000000072c020] __platform_driver_register+0x50/0x70 [c0000000b38e3bd0] [c00000000105c984] powernv_flash_driver_init+0x24/0x38 [c0000000b38e3bf0] [c000000000010904] do_one_initcall+0x84/0x464 [c0000000b38e3cd0] [c000000001004548] kernel_init_freeable+0x530/0x634 [c0000000b38e3db0] [c000000000011154] kernel_init+0x1c/0x168 [c0000000b38e3e20] [c00000000000bed4] ret_from_kernel_thread+0x5c/0x68 mtd mtd1: Failed to register NVMEM device With the change we now have root@(none):/sys/bus/nvmem/devices# ls -al total 0 drwxr-xr-x 2 root root 0 Feb 6 20:49 . drwxr-xr-x 4 root root 0 Feb 6 20:49 .. lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@0 -> ../../../devices/platform/ibm,opal:flash@0/mtd/mtd0/flash@0 lrwxrwxrwx 1 root root 0 Feb 6 20:49 flash@1 -> ../../../devices/platform/ibm,opal:flash@1/mtd/mtd1/flash@1 Fixes: 1cbb4a1c433a ("mtd: powernv: Add powernv flash MTD abstraction driver") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
2019-01-29mtd: docg3: fix a possible memory leak of mtd->nameYueHaibing
In case DOC_CHIPID_G3, mtd->name is not freed in err handling path, which is alloced by kasprintf(). Fix this by using devm_kasprintf(). Fixes: ae9d4934b2d7 ("mtd: docg3: add multiple floor support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-29mtd: docg3: Fix passing zero to 'PTR_ERR' warning in doc_probe_deviceYueHaibing
Fix a static code checker warning: drivers/mtd/devices/docg3.c:1875 doc_probe_device() warn: passing zero to 'ERR_PTR' Fixes: ae9d4934b2d7 ("mtd: docg3: add multiple floor support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-17mtd: m25p80: add support of octal mode I/O transferYogesh Narayan Gaur
Add support for octal mode I/O data transfer based on the controller (spi) mode. Assign hw-capability mask bits for octal transfer. Signed-off-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2019-01-08mtd: mtdram: Expose module parametersRichard Weinberger
Since we can set module parameters also when a driver is built in, it makes no sense to protect module parameter with #ifdef MODULE. Now the mtdram sizes can also set when the module is not a loadable module. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
2018-12-28Merge tag 'devicetree-for-4.21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: "The biggest highlight here is the start of using json-schema for DT bindings. Being able to validate bindings has been discussed for years with little progress. - Initial support for DT bindings using json-schema language. This is the start of converting DT bindings from free-form text to a structured format. - Reworking of initrd address initialization. This moves to using the phys address instead of virt addr in the DT parsing code. This rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary rebuilding of lots of files. - Fix stale phandle entries in phandle cache - DT overlay validation improvements. This exposed several memory leak bugs which have been fixed. - Use node name and device_type helper functions in DT code - Last remaining conversions to using %pOFn printk specifier instead of device_node.name directly - Create new common RTC binding doc and move all trivial RTC devices out of trivial-devices.txt. - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra PHY, and Xen shared memory - Update dtc to upstream version v1.4.7-57-gf267e674d145" * tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits) of: __of_detach_node() - remove node from phandle cache of: of_node_get()/of_node_put() nodes held in phandle cache gpio-omap.txt: add reg and interrupts properties dt-bindings: mrvl,intc: fix a trivial typo dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110 dt-bindings: Convert trivial-devices.txt to json-schema dt-bindings: arm: mrvl: amend Browstone compatible string dt-bindings: arm: Convert Tegra board/soc bindings to json-schema dt-bindings: arm: Convert ZTE board/soc bindings to json-schema dt-bindings: arm: Add missing Xilinx boards dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema dt-bindings: arm: Convert VIA board/soc bindings to json-schema dt-bindings: arm: Convert ST STi board/soc bindings to json-schema dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema dt-bindings: arm: Convert QCom board/soc bindings to json-schema dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema dt-bindings: arm: Convert Altera board/soc bindings to json-schema ...
2018-12-18Merge tag 'nand/for-4.21' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon
NAND core changes: - kernel-doc miscellaneous fixes. - Third batch of fixes/cleanup to the raw NAND core impacting various controller drivers (ams-delta, marvell, fsmc, denali, tegra, vf610): * Stopping to pass mtd_info objects to internal functions * Reorganizing code to avoid forward declarations * Dropping useless test in nand_legacy_set_defaults() * Moving nand_exec_op() to internal.h * Adding nand_[de]select_target() helpers * Passing the CS line to be selected in struct nand_operation * Making ->select_chip() optional when ->exec_op() is implemented * Deprecating the ->select_chip() hook * Moving the ->exec_op() method to nand_controller_ops * Moving ->setup_data_interface() to nand_controller_ops * Deprecating the dummy_controller field * Fixing JEDEC detection * Providing a helper for polling GPIO R/B pin Raw NAND chip drivers changes: - Macronix: * Flagging 1.8V AC chips with a broken GET_FEATURES(TIMINGS) Raw NAND controllers drivers changes: - Ams-delta: * Fixing the error path * SPDX tag added * May be compiled with COMPILE_TEST=y * Conversion to ->exec_op() interface * Dropping .IOADDR_R/W use * Use GPIO API for data I/O - Denali: * Removing denali_reset_banks() * Removing ->dev_ready() hook * Including <linux/bits.h> instead of <linux/bitops.h> * Changes to comply with the above fixes/cleanup done in the core. - FSMC: * Adding an SPDX tag to replace the license text * Making conversion from chip to fsmc consistent * Fixing unchecked return value in fsmc_read_page_hwecc * Changes to comply with the above fixes/cleanup done in the core. - Marvell: * Preventing timeouts on a loaded machine (fix) * Changes to comply with the above fixes/cleanup done in the core. - OMAP2: * Pass the parent of pdev to dma_request_chan() (fix) - R852: * Use generic DMA API - sh_flctl: * Converting to SPDX identifiers - Sunxi: * Write pageprog related opcodes to the right register: WCMD_SET (fix) - Tegra: * Stop implementing ->select_chip() - VF610: * Adding an SPDX tag to replace the license text * Changes to comply with the above fixes/cleanup done in the core. - Various trivial/spelling/coding style fixes. SPI-NAND drivers changes: - Removing the depreacated mt29f_spinand driver from staging. - Adding support for: * Toshiba TC58CVG2S0H * GigaDevice GD5FxGQ4xA * Winbond W25N01GV
2018-12-13Merge branch 'yaml-bindings-for-v4.21' into dt/nextRob Herring
2018-12-03mtd: use DEFINE_SHOW_ATTRIBUTE() instead of open-coding itYangtao Li
DEFINE_SHOW_ATTRIBUTE macro can help us simplify the code, so change to it. And change the DEBUGFS_RO_ATTR macro defined in some file to a standard macro. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-11-27mtd: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linux-mtd@lists.infradead.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Rob Herring <robh@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:14:11 +0000