summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2008-09-20mmc_block: handle error from mmc_register_driver()Akinobu Mita
Check error from mmc_register_driver() and properly unwind block device registration. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: Set MMC_CAP_NEEDS_POLL if no detect_pinHaavard Skinnemoen
This allows the mmc core to detect card insertion/removal for slots that don't have any CD pin wired up. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: Fix bogus debugfs file sizeHaavard Skinnemoen
We used to store a binary register snapshot in the "regs" file, so we set the file size to be the size of this snapshot. This is no longer valid since we switched to using seq_file. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: Fix memory leak in atmci_regs_showHaavard Skinnemoen
The debugfs hook atmci_regs_show allocates a temporary buffer for storing a register snapshot, but it doesn't free it before returning. Plug this leak. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20atmel-mci: debugfs: enable clock before dumping regsHaavard Skinnemoen
Make sure that the peripheral clock is enabled before reading the MMIO registers for the debugfs "regs" dump. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-20tmio_mmc: fix compilation with debug enabledDmitry Baryshkov
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Ian Molton <spyro@f2s.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-05drivers/mmc/card/block.c: fix refcount leak in mmc_block_open()Andrew Morton
mmc_block_open() increments md->usage although it returns with -EROFS when default mounting a MMC/SD card with write protect switch on. This reference counting bug prevents /dev/mmcblkX from being released on card removal, and situation worsen with reinsertion until the minor number range runs out. Reported-by: <sasin@solomon-systech.com> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-05[ARM] omap: fix a load of "warning: symbol 'xxx' was not declared. Should it ↵Russell King
be static?" Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-05[ARM] omap: convert OMAP drivers to use ioremap()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-04Use PCI_DEVICE_ID_88ALP01 for CAFÉ chip, rather than PCI_DEVICE_ID_CAFE.David Woodhouse
Probably better to use the official designation. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2008-09-02mmc: at91_mci: don't use coherent dma buffersDavid Brownell
At91_mci is abusing dma_free_coherent(), which may not be called with IRQs disabled. I saw "mkfs.ext3" on an MMC card objecting voluminously as each write completed: WARNING: at arch/arm/mm/consistent.c:368 dma_free_coherent+0x2c/0x224() [<c002726c>] (dump_stack+0x0/0x14) from [<c00387d4>] (warn_on_slowpath+0x4c/0x68) [<c0038788>] (warn_on_slowpath+0x0/0x68) from [<c0028768>] (dma_free_coherent+0x2c/0x224) r6:00008008 r5:ffc06000 r4:00000000 [<c002873c>] (dma_free_coherent+0x0/0x224) from [<c01918ac>] (at91_mci_irq+0x374/0x420) [<c0191538>] (at91_mci_irq+0x0/0x420) from [<c0065d9c>] (handle_IRQ_event+0x2c/0x6c) ... This bug has been around for a LONG time. The MM warning is from late 2005, but the driver merged a year later ... so I'm puzzled why nobody noticed this before now. The fix involves noting that this buffer shouldn't be DMA-coherent; it's just used for normal DMA writes. So replace it with standard kmalloc() buffering and DMA mapping calls. This is the quickie fix. A better one would not rely on allocating large bounce buffers. (Note that dma_alloc_coherent could have failed too, but that case was ignored... kmalloc is a bit more likely to fail though.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Pierre Ossman <drzeus-mmc@drzeus.cx> Cc: Andrew Victor <linux@maxim.org.za> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-17sdricoh_cs: removed unused #include <version.h>Huang Weiyi
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/mmc/host/sdricoh_cs.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-17s3cmci: attach get_cd host opsBen Dooks
Attach the routine to get_cd to allow the MMC core to find out whether there is a card present or not without the tedious process of trying to send commands to the card or not. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-17s3cmci: fix sparse errors from non-exported functionsBen Dooks
Fix the following sparse errors by making the functions static and fixing the check for host->base. 598:6: warning: symbol 's3cmci_dma_done_callback' was not declared. Should it be static? 744:6: warning: symbol 's3cmci_dma_setup' was not declared. Should it be static? 1209:20: warning: Using plain integer as NULL pointer Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-10mfd: have TMIO drivers and subdevices depend on ARMSamuel Ortiz
The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-10mfd: TMIO MMC driverIan Molton
This patch adds support for the MMC subdevice 'cell' commonly found in TMIO based MFDs. Signed-off-by: Ian Molton <spyro@f2s.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-07[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/machRussell King
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07Merge branch 'header-move' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
2008-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesRussell King
2008-08-07[ARM] Eliminate useless includes of asm/mach-types.hRussell King
There are 43 includes of asm/mach-types.h by files that don't reference anything from that file. Remove these unnecessary includes. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-05avr32: Use <mach/foo.h> instead of <asm/arch/foo.h>Haavard Skinnemoen
Update all avr32-specific files to use the new platform-specific header locations. Drivers shared with ARM are left alone for now. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-01au1xmmc: raise segment size limit.Manuel Lauss
Raise the DMA block size limit from 2048 bytes to the maximum supported by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200). This gives a very small performance boost and apparently fixes an oops when MMC-DMA and network traffic are active at the same time. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01mmc_block: use proper sg iteratorsPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01mmc: properly iterate over sg list in debug checkPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01mmc_test: Revert "mmc_test: test oversized sg lists"Pierre Ossman
This reverts commit 48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized sg lists are not allowed anymore, and the core even checks for them in debug mode, so this test is entirely incorrect. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: check correct return valuePierre Ossman
Fix a copy-and-paste error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: disable DMA for req, not completelyPierre Ossman
The wrong flag was manipulated when an invalid sg list was given, turning off DMA on the next (and all subsequent) request instead of the current one. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: handle bug in JMB38x for sizes < 4 bytesPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27avr32: some mmc/sd cleanupsDavid Brownell
Minor cleanups for the MMC/SD support on avr32: - Make at32_add_device_mci() properly initialize "missing" platform data ... so boards like STK1002 won't try GPIO 0. - Switch over to gpio_is_valid() instead of testing for only one designated value. - Provide STK1002 platform data for the unlikely case that switches are set so first Ethernet controller isn't in use. (That's the only way to get card detect and writeprotect switch sensing on the STK1000.) And get rid of one "unused variable" warning. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-07-27Merge commit 'upstream/master'Haavard Skinnemoen
2008-07-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: atmel-mci: debugfs support mmc: Add per-card debugfs support mmc: Export internal host state through debugfs imxmmc: fix crash when no platform data is provided imxmmc: fix platform resources imxmmc: remove DEBUG definition mmc_spi: put signals to low power off fix
2008-07-27atmel-mci: debugfs supportHaavard Skinnemoen
Create additional files under the host's debugfs directory containing additional host-specific debug information. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Add per-card debugfs supportHaavard Skinnemoen
For each card successfully added to the bus, create a subdirectory under the host's debugfs root with information about the card. At the moment, only a single file is added to the card directory for all cards: "state". It reflects the "state" field in struct mmc_card, indicating whether the card is present, readonly, etc. For MMC and SD cards (not SDIO), another file is added: "status". Reading this file will ask the card about its current status and return it. This can be useful if the card just refuses to respond to any commands, which might indicate that the card state is not what the MMC core thinks it is (due to a missing stop command, for example.) Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27mmc: Export internal host state through debugfsHaavard Skinnemoen
When CONFIG_DEBUG_FS is set, create a few files under /sys/kernel/debug containing information about an mmc host's internal state. Currently, just a single file is created, "ios", which contains information about the current operating parameters for the bus (clock speed, bus width, etc.) Host drivers can add additional files and directories under the host's root directory by passing the debugfs_root field in struct mmc_host as the 'parent' parameter to debugfs_create_*. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: fix crash when no platform data is providedPaulius Zaleckas
Don't crash if no platform data is provided. In this case assume that card is present. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: fix platform resourcesPaulius Zaleckas
Fixup platform resources handling. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-27imxmmc: remove DEBUG definitionPaulius Zaleckas
Removed DEBUG #define #undef, because module is automaticaly compiled with -DDEBUG when CONFIG_MMC_DEBUG is defined. Currently it just generates compiler warning about redefinition. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-26dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori
Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26drivers/mmc/host/sdhci.h needs scatterlist.hAndrew Morton
alpha: drivers/mmc/host/sdhci.h:242: error: field 'sg_miter' has incomplete type Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24mmc_spi: put signals to low power off fixJan Nikitenko
The original intention was to write a zero byte to mmc to force spi signals to low when doing power off. Somehow the spi_w8r8 call got there so a read followed the write of single zero byte. This patch changes that to simple write of zero byte without the following read. This way the power off is more reliable and completely sufficient. Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: highmem capable PIO routinesPierre Ossman
Improve the PIO handling so that it can service highmem pages. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: print message when attaching to cardPierre Ossman
Make it a bit more obvious that the card has been claimed by the mmc_test driver so that people don't have to wonder why their block device never shows up. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_block: bounce buffer highmem supportPierre Ossman
Support highmem pages in the bounce buffer code by using the sg_copy_from/to_buffer() functions. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: fix bad warning from commit c8b3e02Pierre Ossman
Commit c8b3e02 renamed a variable, but missed one reference to it inside a WARN_ON, causing it to incorrectly trigger. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23sdhci: add warnings for bad buffers in ADMA pathPierre Ossman
The ADMA code path assumes that the 3 byte alignment fix doesn't cross a page boundary. I'm not convinced this is worth supporting, but at least print a warning in the off chance we'll actually see such a request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: test oversized sg listsPierre Ossman
Add tests that make sure the driver properly checks the blocks and blksz fields and doesn't assume the sg list has a size that perfectly matches the current request. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23mmc_test: highmem testsPierre Ossman
Add a couple of tests to make sure the host driver handles highmem memory pages properly. Unfortunately there is no way to guarantee an allocation below 4 GB in i386, so it might give you addresses that are out of reach for the hardware (OTOH, so will any other highmem allocation in the kernel). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23s3cmci: ensure host stopped on machine shutdownBen Dooks
Ensure that the s3cmci host controller is turned off when the machine is shutdown, otherwise we end up leaving the card powered and processing insertion and removal events after the system prints "System halted." Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23au1xmmc: suspend/resume implementationManuel Lauss
Basic suspend/resume support: disable peripheral on suspend and reinit on resume. Tested on Au1200. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-07-23s3cmci: fixes for section mismatch warningsBen Dooks
Fix the naming of various functions in the s3cmc driver to stop triggering section mismatch warnings. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 19:49:59 +0000