summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2017-12-18Merge branch 'fixes' into nextUlf Hansson
2017-12-18mmc: avoid removing non-removable hosts during suspendDaniel Drake
The Weibu F3C MiniPC has an onboard AP6255 module, presenting two SDIO functions on a single MMC host (Bluetooth/btsdio and WiFi/brcmfmac), and the mmc layer correctly detects this as non-removable. After suspend/resume, the wifi and bluetooth interfaces disappear and do not get probed again. The conditions here are: 1. During suspend, we reach mmc_pm_notify() 2. mmc_pm_notify() calls mmc_sdio_pre_suspend() to see if we can suspend the SDIO host. However, mmc_sdio_pre_suspend() returns -ENOSYS because btsdio_driver does not have a suspend method. 3. mmc_pm_notify() proceeds to remove the card 4. Upon resume, mmc_rescan() does nothing with this host, because of the rescan_entered check which aims to only scan a non-removable device a single time (i.e. during boot). Fix the loss of functionality by detecting that we are unable to suspend a non-removable host, so avoid the forced removal in that case. The comment above this function already indicates that this code was only intended for removable devices. Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: android-goldfish: remove duplicate includesPravin Shedge
These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: move mmc_gpio_request_cd() before mmc_add_host()Masahiro Yamada
Drivers do not need to call mmc_gpiod_request_cd_irq() explicitly because mmc_start_host() calls it. To make it work, cd_gpio must be set before mmc_add_host(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio, renesas_sdhi: set mmc_host_ops hooks directlyMasahiro Yamada
Drivers can set any mmc_host_ops hooks between tmio_mmc_host_alloc() and tmio_mmc_host_probe(). Remove duplicated hooks in tmio_mmc_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: move mmc_host_ops to struct tmio_mmc_host from static dataMasahiro Yamada
Currently, tmio_mmc_ops is static data and tmio_mmc_host_probe() updates some hooks in the static data. This is a problem when two or more instances call tmio_mmc_host_probe() and each of them requests to use its own card_busy/start_signal_voltage_switch. We can borrow a solution from sdhci_alloc_host(). Copy the whole ops structure to host->mmc_host_ops, then override the hooks in malloc'ed data. Constify tmio_mmc_ops since it is now a template ops used by default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: use devm_ioremap_resource() instead of devm_ioremap()Masahiro Yamada
The TMIO core misses to call request_mem_region(). devm_ioremap_resource() takes care of it and makes the code cleaner. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: set tmio_mmc_host to driver dataMasahiro Yamada
The remove, suspend, resume hooks need to get tmio_mmc_host. It is tedious to call mmc_priv() to convert mmc_host to tmio_mmc_host. We can directly set tmio_mmc_host to driver data. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: renesas_sdhi: remove eprobe jump labelMasahiro Yamada
"goto eprobe" does nothing. Return directly. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: renesas_sdhi: remove wrong depends on to enable compile testMasahiro Yamada
ARCH_RENESAS is a stronger condition than (ARM || ARM64). If ARCH_RENESAS is enabled, (ARM || ARM64) is met as well. What is worse, the first depends on line prevents COMPILE_TEST from enabling this driver. It should be removed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: use ioread* for repeated access to a registerWolfram Sang
Not all archs define reads* and writes*. Switch to ioread*_rep and friends which is defined everywhere, so we can enable COMPILE_TEST after that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: renesas_sdhi: Add MODULE_LICENSEMasaharu Hayakawa
The following error occurs when loading renesas_sdhi_core.c module, so add MODULE_LICENSE("GPL v2"). renesas_sdhi_core: module license 'unspecified' taints kernel. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Fixes: 9d08428afb72 ("mmc: renesas-sdhi: make renesas_sdhi_sys_dmac main module file") Cc: <stable@vger.kernel.org> # v4.13+ [Shimoda: Added Fixes tag and Cc to the stable ML] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: renesas_sdhi: consolidate DMAC CONFIG optionsMasahiro Yamada
The description in the Makefile is odd. Fix the CONFIG selection in a cleaner way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: sunxi-mmc: Handle return value of platform_get_irqArvind Yadav
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: sdhci-spear: Handle return value of platform_get_irqArvind Yadav
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: sdhci-acpi: Handle return value of platform_get_irqArvind Yadav
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: s3cmci: Fix platform_get_irq's error checkingArvind Yadav
The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-15mmc: meson-gx-mmc: Fix platform_get_irq's error checkingArvind Yadav
The platform_get_irq() function returns negative if an error occurs. zero or positive number on success. platform_get_irq() error checking for zero is not correct. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11Merge branch 'fixes' into nextUlf Hansson
2017-12-11mmc: core: apply NO_CMD23 quirk to some specific cardsChristoph Fritz
To get an usdhc Apacer and some ATP SD cards work reliable, CMD23 needs to be disabled. This has been tested on i.MX6 (sdhci-esdhc) and rk3288 (dw_mmc-rockchip). Without this patch on i.MX6 (sdhci-esdhc): $ dd if=/dev/urandom of=/mnt/test bs=1M count=10 conv=fsync | <mmc0: starting CMD23 arg 00000400 flags 00000015> | mmc0: starting CMD25 arg 00a71f00 flags 000000b5 | mmc0: blksz 512 blocks 1024 flags 00000100 tsac 3000 ms nsac 0 | mmc0: CMD12 arg 00000000 flags 0000049d | sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001 | mmc0: Timeout waiting for hardware interrupt. Without this patch on rk3288 (dw_mmc-rockchip): | mmc1: Card stuck in programming state! mmcblk1 card_busy_detect | dwmmc_rockchip ff0c0000.dwmmc: Busy; trying anyway | mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, | actual 400000HZ div = 0) | mmc1: card never left busy state | mmc1: tried to reset card, got error -110 | blk_update_request: I/O error, dev mmcblk1, sector 139778 | Buffer I/O error on dev mmcblk1p1, logical block 131586, lost async | page write Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11Merge branch 'fixes' into nextUlf Hansson
2017-12-11mmc: sdhci-acpi: Avoid broken UHS transfer modes on Intel CHTAdrian Hunter
Intel DSM function 8 has been used to identify transfer modes that are not working on some CHT boards. Add support for that. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: sdhci-acpi: Add setup_host() callbackAdrian Hunter
Add a ->setup_host() callback so that device-specific changes can be made to the mmc host controller before it is added. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: block: blk-mq: Potential NULL deref on mmc_blk_alloc_req() failureDan Carpenter
mmc_blk_alloc_req() is supposed to return error pointers but there is one path where we forget to set the error code and accidentally return NULL. The callers are not expecting that and will have a NULL pointer dereference. Fixes: 41e3efd07d5a ("mmc: block: Simplify cleaning up the queue") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: cqhci: Ensure macro parameters are wrapped in parenthesesAdrian Hunter
Absence of parentheses is not affecting current code, but ensure macro parameters are wrapped in parentheses. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: core: Remove code no longer needed after the switch to blk-mqAdrian Hunter
Remove code no longer needed after the switch to blk-mq. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: block: Remove code no longer needed after the switch to blk-mqAdrian Hunter
Remove code no longer needed after the switch to blk-mq. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: core: Remove option not to use blk-mqAdrian Hunter
Remove config option MMC_MQ_DEFAULT and parameter mmc_use_blk_mq, so that blk-mq must be used always. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardbyinbo.zhu
When system wakes up from sleep on ls1046ardb, the SD operation fails with mmc error messages since ESDHC_TB_EN bit couldn't be cleaned by eSDHC_SYSCTL[RSTA]. It's proper to clean this bit in esdhc_reset() rather than in probe. Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com> Acked-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: mmc_test: Ensure command queue is disabled for testingAdrian Hunter
mmc_test disables the command queue because none of the tests use the command queue. However the Reset Test will re-enable it, so disable it in that case too. Fixes: 9d4579a85c84 ("mmc: mmc_test: Disable Command Queue while mmc_test is used") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: core: Ensure cmd_completion is initializedAdrian Hunter
mmc_test now uses mmc_start_request() to test sending commands during "ongoing" asynchronous transfers, i.e. tests: Commands during non-blocking read - use Set Block Count (CMD23) Commands during non-blocking write - use Set Block Count (CMD23) mmc_start_request() was not initializing cmd_completion, but cmd_completion is used by "ongoing" transfers, so move initialization of cmd_completion into making mmc_start_request(). Fixes: cb39f61e9b1e ("mmc: core: Export a few functions needed for blkmq support") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400Shah Nehal-Bakulchandra
This patch supports HS400 for AMD upcoming emmc 5.0 controller.The HS400 and HS200 mode requires hardware work around also. This patch adds the quirks for the same. Signed-off-by: Nehal-bakulchandra Shah <Nehal-bakulchandra.Shah@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc_test: use ktime_get_ts64 for timestampsArnd Bergmann
Calling getnstimeofday() can suffer from time jumps and from the y2038 overflow, so it is not appropriate here. Using ktime_get_ts64() solves both problems. Using ktime_get() with ktime_t timestamps would also work, but it seems that we mainly want to print the times as seconds+nanoseconds, so it would require an extra division in the output. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: sdhci-of-arasan: Add sdhci_arasan_set_powerMilan Stevanovic
The power register needs to have a valid voltage set even when the power supply is managed by an external regulator. Signed-off-by: Milan Stevanovic <milan.o.stevanovic@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: renesas_sdhi: enable R-Car D3 (r8a77995) supportUlrich Hecht
Whitelists for internal DMAC implementation. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2017-12-11mmc: block: make function mmc_cqe_issue_type staticColin Ian King
The function mmc_cqe_issue_type is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: drivers/mmc/core/queue.c:62:21: warning: symbol 'mmc_cqe_issue_type' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: block: blk-mq: fix boolreturn.cocci warningsWu Fengguang
drivers/mmc/core/block.c:2106:9-10: WARNING: return of 0/1 in function 'mmc_blk_status_error' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes:7eb43d537166 ("mmc: block: blk-mq: Stop using legacy recovery") CC: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-11mmc: mmc_test: Do not use mmc_start_areq() anymoreAdrian Hunter
The block driver's blk-mq paths do not use mmc_start_areq(). In order to remove mmc_start_areq() entirely, start by removing it from mmc_test. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: blk-mq: Stop using legacy recoveryAdrian Hunter
There are only a few things the recovery needs to do. Primarily, it just needs to: Determine the number of bytes transferred Get the card back to transfer state Determine whether to retry There are also a couple of additional features: Reset the card before the last retry Read one sector at a time The legacy code spent much effort analyzing command errors, but commands fail fast, so it is simpler just to give all command errors the same number of retries. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: Reduce polling timeout from 10 minutes to 10 secondsAdrian Hunter
Set a 10 second timeout for polling write request busy state. Note, mmc core is setting a 3 second timeout for SD cards, and SDHCI has long had a 10 second software timer to timeout the whole request, so 10 seconds should be ample. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: Add timeout_clks when calculating timeoutAdrian Hunter
According to the specification, total access time is derived from both TAAC and NSAC, which means the timeout should add both timeout_ns and timeout_clks. Host drivers do that, so make the block driver do that too. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: Check for transfer state in card_busy_detect()Adrian Hunter
The card is required to return to transfer state. Since that is the state required to start another transfer, check for that state instead of programming state. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: Check the timeout correctly in card_busy_detect()Adrian Hunter
Pedantically, ensure the status is checked for the last time after the full timeout has passed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: blk-mq: Check error bits and save the exception bit when polling ↵Adrian Hunter
card busy Check error bits and save the exception bit when polling card busy. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: Make card_busy_detect() accumulate all response error bitsAdrian Hunter
Make card_busy_detect() accumulate all response error bits. Later patches will make use of this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: blk-mq: Separate card polling from recoveryAdrian Hunter
Recovery is simpler to understand if it is only used for errors. Create a separate function for card polling. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: blk-mq: Add support for direct completionAdrian Hunter
For blk-mq, add support for completing requests directly in the ->done callback. That means that error handling and urgent background operations must be handled by recovery_work in that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: sdhci-pci: Add CQHCI support for Intel GLKAdrian Hunter
Add CQHCI initialization and implement CQHCI operations for Intel GLK. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: cqhci: support for command queue enabled hostVenkat Gopalakrishnan
This patch adds CMDQ support for command-queue compatible hosts. Command queue is added in eMMC-5.1 specification. This enables the controller to process upto 32 requests at a time. Adrian Hunter contributed renaming to cqhci, recovery, suspend and resume, cqhci_off, cqhci_wait_for_idle, and external timeout handling. Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-11mmc: block: Add CQE supportAdrian Hunter
Add CQE support to the block driver, including: - optionally using DCMD for flush requests - "manually" issuing discard requests - issuing read / write requests to the CQE - supporting block-layer timeouts - handling recovery - supporting re-tuning CQE offers 25% - 50% better random multi-threaded I/O. There is a slight (e.g. 2%) drop in sequential read speed but no observable change to sequential write. CQE automatically sends the commands to complete requests. However it only supports reads / writes and so-called "direct commands" (DCMD). Furthermore DCMD is limited to one command at a time, but discards require 3 commands. That makes issuing discards through CQE very awkward, but some CQE's don't support DCMD anyway. So for discards, the existing non-CQE approach is taken, where the mmc core code issues the 3 commands one at a time i.e. mmc_erase(). Where DCMD is used, is for issuing flushes. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 14:38:23 +0000