summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2011-06-25mmc: queue: bring discard_granularity/alignment into line with SCSIAdrian Hunter
SCSI defines discard alignment as the offset to the first optimal discard. In the case of SD/MMC, that is always zero which is the default. SCSI defines discard granularity as a hint of a optimal discard size. That is much better expressed by the MMC "preferred erase size" (pref_erase) field. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: queue: append partition subname to queue thread nameAdrian Hunter
For example, an eMMC with 2 boot partitions will have 3 threads. The names change from: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0 42 ? 00:00:00 mmcqd/0 to: 40 ? 00:00:00 mmcqd/0 41 ? 00:00:00 mmcqd/0boot0 42 ? 00:00:00 mmcqd/0boot1 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: core: make erase timeout calculation allow for gated clockAdrian Hunter
The erase timeout calculation may depend on clock rate which is zero if the clock is gated, so use mmc_host_clk_rate() which allows for that case. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: block: switch card to User Data Area when removing the block driverAdrian Hunter
The MMC block driver and other drivers (e.g. mmc-test) will expect the card to be switched to the User Data Area eMMC partition when they start. Hence the MMC block driver should ensure it is that way when it is removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: sdio: reset card during power_restoreDaniel Drake
mmc_sdio_power_restore() skips some steps that are performed in other power-related codepaths which are necessary to fully reset the card. Without this, runtime PM fails for SD8686 SDIO wifi on OLPC XO-1.5. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: sdhi: DMA slave ID 0 is invalidGuennadi Liakhovetski
Don't try to allocate DMA resources if the platform didn't specify positive DMA slave IDs. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: tmio: fix regression in TMIO_MMC_WRPROTECT_DISABLE handlingGuennadi Liakhovetski
Commit b6147490e6aac82 ("mmc: tmio: split core functionality, DMA and MFD glue") broke handling of the TMIO_MMC_WRPROTECT_DISABLE flag by the tmio-mmc driver. This patch restores the original behaviour. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: omap_hsmmc: use original sg_len for dma_unmap_sgPer Forlin
Don't use the returned sg_len from dma_map_sg() as inparameter to dma_unmap_sg(). Use the original sg_len for both dma_map_sg and dma_unmap_sg according to the documentation in DMA-API.txt. Signed-off-by: Per Forlin <per.forlin@linaro.org> Reviewed-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: omap_hsmmc: fix ocr mask usageAnand Gadiyar
The OMAP HSMMC driver uses an ocr_mask to determine the list of voltages supported by the card. It populates this mask based on the list of voltages supported by the regulator that supplies the voltage. Commit 64be97822b (omap4 hsmmc: Update ocr mask for MMC2 for regulator to use) passed a fixed ocr_mask from the OMAP4 SDP board file to limit the voltage to 2.9-3.0 Volts, and updated the driver to use this mask if provided, instead of using the regulator's supported voltages. However the commit is buggy - the ocr_mask is overridden by the regulator's capabilities anyway. Fix this. (The bug shows up when a system-wide suspend is attempted on the OMAP4 SDP/Blaze platforms. The eMMC card comes up at 3V, but drops to 1.65V after the system resumes). Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-25mmc: sdio: fix runtime PM path during driver removalOhad Ben-Cohen
After commit e1866b3 "PM / Runtime: Rework runtime PM handling during driver removal" was introduced, the driver core stopped incrementing the runtime PM usage counter of the device during the invocation of the ->remove() callback. This indirectly broke SDIO's runtime PM path during driver removal, because no one calls _put_sync() anymore after ->remove() completes. This means that the power of runtime-PM-managed SDIO cards is kept high after their driver is removed (even if it was powered down beforehand). Fix that by directly calling _put_sync() when the last usage counter is downref'ed by the SDIO bus. Reported-and-tested-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-18mmc: sdhi: fix module unloadingGuennadi Liakhovetski
MMC host drivers must be able to process interrupts during mmc_remove_host(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-18mmc: of_mmc_spi: add NO_IRQ define to of_mmc_spi.cWanlong Gao
Provide a dummy value of NO_IRQ for architectures that don't support it (such as MIPS). Fixes the build error for MIPS. Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-18mmc: vub300: fix null dereferences in error handlingChris Ball
Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-06-15Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: footbridge: fix clock event support ARM: footbridge: fix debug macros ARM: initrd: disable initrds outside of memory ARM: extend Code: line by one 16-bit quantity for Thumb instructions ARM: 6955/1: cmpxchg syscall should data abort if page not write ARM: 6954/1: zImage: fix Thumb2 breakage ARM: 6953/1: DT: don't try to access physical address zero ARM: 6949/2: mach-u300: fix compilaton warning in IO accessors Revert "ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks" Revert "ARM: 6943/1: mm: use TTBR1 instead of reserved context ID" davinci: make PCM platform devices static arm: davinci: Fix fallout from generic irq chip conversion ARM: 6894/1: mmci: trigger card detect IRQs on falling and rising edges ARM: 6952/1: fix lockdep warning of "unannotated irqs-off" ARM: 6951/1: include .bss in memory layout information ARM: 6948/1: Fix .size directives for __arm{7,9}tdmi_proc_info ARM: 6947/2: mach-u300: fix compilation error in timer ARM: 6946/1: vexpress: move v2m clock init to init_early ARM: mx51/sdma: Check the chip revision in run-time arm: mxs: include asm/processor.h for cpu_relax()
2011-06-06ARM: 6894/1: mmci: trigger card detect IRQs on falling and rising edgesLinus Walleij
Right now the card detect IRQ for MMCI is requested without any flags which will give some default machine-specified IRQ behaviour. However on the U300 rising+falling edges (such as can be expected from a simple GPIO to generate when inserting/removing a card) need to be requested explicitly. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Ulf Hansson <ulf.hansson@stericsson.com> Cc: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-06-01ARM: OMAP4: MMC: no regulator off during probe for eMMCBalaji T K
eMMC does not handle power off when not in sleep state, Skip regulator disable during probe when eMMC is not in known state - state left by bootloader. Resolves eMMC failure on OMAP4 mmc0: error -110 whilst initialising MMC card Signed-off-by: Balaji T K <balajitk@ti.com> Tested-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-27Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits) ARM: 6945/1: Add unwinding support for division functions ARM: kill pmd_off() ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks ARM: 6943/1: mm: use TTBR1 instead of reserved context ID ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area ARM: add sendmmsg syscall ARM: 6863/1: allow hotplug on msm ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ARM: 6830/1: mach-ux500: force PrimeCell revisions ARM: 6829/1: amba: make hardcoded periphid override hardware ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID ARM: 6827/1: mach-netx: delete hardcoded periphid ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM at91: drop at572d940hf support at91rm9200: introduce at91rm9200_set_type to specficy cpu package at91: drop boot_params and PLAT_PHYS_OFFSET ...
2011-05-26mmc: Use device platform_data to retrieve tmio_mmc platform bitsSamuel Ortiz
With the addition of the platform device mfd_cell pointer, we can now cleanly pass the sub device drivers platform data pointers through the regular device platform_data one, and get rid of mfd_get_data() Cc: Ian Molton <spyro@f2s.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Philipp Zabel <philipp.zabel@gmail.com> Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26ARM: 6832/1: mmci: support for ST-Ericsson db8500v2Philippe Langlais
ST-Ericsson modified ARM PrimeCell PL180 block has not got an updated corresponding amba-id, althought the IP block has changed in db8500v2. The change was done to the datactrl register. Using the overrided subversion ID, account for this. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits) mmc: core: eMMC bus width may not work on all platforms mmc: sdhci: Auto-CMD23 fixes. mmc: sdhci: Auto-CMD23 support. mmc: core: Block CMD23 support for UHS104/SDXC cards. mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI. mmc: core: Use CMD23 for multiblock transfers when we can. mmc: quirks: Add/remove quirks conditional support. mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w mmc: core: duplicated trial with same freq in mmc_rescan_try_freq() mmc: core: add support for eMMC Dual Data Rate mmc: core: eMMC signal voltage does not use CMD11 mmc: sdhci-pxa: add platform code for UHS signaling mmc: sdhci: add hooks for setting UHS in platform specific code mmc: core: clear MMC_PM_KEEP_POWER flag on resume mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume mmc: sdhi: allow powering down controller with no card inserted mmc: tmio: runtime suspend the controller, where possible mmc: sdhi: support up to 3 interrupt sources mmc: sdhi: print physical base address and clock rate ...
2011-05-25mmc: core: eMMC bus width may not work on all platformsPhilip Rakity
CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25mmc: sdhci: Auto-CMD23 fixes.Andrei Warkentin
Fixes bugs in Auto-CMD23 feature enable decision. Auto-CMD23 should be enabled if host is >= v3, and SDMA is not in use. USE_ADMA | USE_SDMA | Auto-CMD23 ---------+----------+----------- 0 | 0 | 1 ---------+----------+----------- 0 | 1 | 0 ---------+----------+----------- 1 | 0 | 1 ---------+----------+----------- 1 | 1 | 1 Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25mmc: sdhci: Auto-CMD23 support.Andrei Warkentin
Enables Auto-CMD23 support where available (SDHCI 3.0 controllers) Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Tested-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25mmc: core: Block CMD23 support for UHS104/SDXC cards.Andrei Warkentin
SD cards operating at UHS104 or better support SET_BLOCK_COUNT. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI.Andrei Warkentin
Implements support for multiblock transfers bounded by SET_BLOCK_COUNT (CMD23). Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25mmc: core: Use CMD23 for multiblock transfers when we can.Andrei Warkentin
CMD23-prefixed instead of open-ended multiblock transfers have a performance advantage on some MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: Add new VUB300 USB-to-SD/SDIO/MMC driverTony Olech
Add a driver for Elan Digital System's VUB300 chip which is a USB connected SDIO/SDmem/MMC host controller. A VUB300 chip enables a USB 2.0 or USB 1.1 connected host computer to use SDIO/SD/MMC cards without the need for a directly connected, for example via PCI, SDIO host controller. Signed-off-by: Anthony F Olech <tony.olech@elandigitalsystems.com> [cjb: various punctuation and style fixes] Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/wPhilip Rakity
32 Bit DMA/ADMA Access 32 Bit Size Support ADMA End Descriptor in current chain (no need for dummy entry) Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: duplicated trial with same freq in mmc_rescan_try_freq()Jaehoon Chung
mmc_rescan_try_freq() tries to init two times with the last frequency. For example, if host->f_min is 400KHz, we see the message below: mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz Andy Ross says that he didn't try this code on a board with an f_min that exactly matches one of the table entries, which explains why the bug wasn't detected. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Andy Ross <andy.ross@windriver.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: add support for eMMC Dual Data RatePhilip Rakity
eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: eMMC signal voltage does not use CMD11Philip Rakity
eMMC chips do not use CMD11 when changing voltage. Add extra argument to call to indicate if CMD11 needs to be sent. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci-pxa: add platform code for UHS signalingPhilip Rakity
Marvell controller requires 1.8V bit in UHS control register 2 be set when doing UHS. eMMC does not require 1.8V for DDR. add platform code to handle this. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: add hooks for setting UHS in platform specific codePhilip Rakity
Allow platform specific code to set UHS registers if implementation requires speciial platform specific handling Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: core: clear MMC_PM_KEEP_POWER flag on resumeEliad Peller
Since the MMC_PM_KEEP_POWER flag should be set on each suspend, it should also cleared on each resume. Upon resuming, we have to know if power was kept (for re-initialization, etc.), so clear it just after resuming. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: dw_mmc: fixed wrong regulator_enable in suspend/resumeJaehoon Chung
regulator_enable() was incorrectly placed in the suspend function instead of the resume function. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhi: allow powering down controller with no card insertedGuennadi Liakhovetski
Supply a link to TMIO private data for platforms to implement their own card detection. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: tmio: runtime suspend the controller, where possibleGuennadi Liakhovetski
The TMIO MMC controller cannot be powered off to save power, when no card is plugged in, because then it will not be able to detect a new card-insertion event. On some implementations, however, it is possible to switch to using another source to detect card insertion. This patch adds support for such implementations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhi: support up to 3 interrupt sourcesMagnus Damm
Convert the SDHI code to support more than a single interrupt source. Needed to support hardware that uses GIC instead of INTC as interrupt controller. Will also allow us to remove the irq forwarding workaround from the INTC code in the future. Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhi: print physical base address and clock rateMagnus Damm
Instead of printing out useless information such as the virtual base address and one of 4 interrupts, convert the SDHI probe() to print out physical base address together with clock rate. We do have a struct device so make use of dev_info(). Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhi: no need for special interrupt flagsMagnus Damm
Modify the SDHI driver to get rid of unwanted irq flags. IRQF_DISABLED unused, see include/linux/interrupt.h IRQF_TRIGGER_FALLING only relevant on external IRQ pins, but since SDHI is internal in the SoC this can go away. Needed to support SDHI on sh73a0 that comes with a GIC that errors out with the IRQF_TRIGGER_FALLING setting. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: tmio/sdhi: break out interrupt request/freeMagnus Damm
Move request_irq()/free_irq() from the shared code in tmio_mmc.c into the SDHI/tmio specific portion in sh_mobile_sdhi.c and tmio_mmc_pio.c. This is ground work to allow us to adjust the SDHI code with IRQ flags and number of interupt sources. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: protect the tmio_mmc driver against a theoretical raceGuennadi Liakhovetski
The MMC subsystem does not guarantee, that host driver .request() and .set_ios() callbacks are serialised. Such concurrent calls, however, do not have to be meaningfully supported, drivers just have to make sure to avoid any severe problems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: add runtime and system power-management support to the MMCIF driverGuennadi Liakhovetski
Adding support for runtime power-management to the MMCIF driver allows it to save power as long as no card is present. To also allow to turn off the power domain at that time, we release DMA channels during that time, since on some sh-mobile systems the DMA controller(s) and the MMCIF block belong to the same power domain. System-wide power management has been tested with experimental PM patches on AP4-based systems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: Add runtime and system-wide PM to the TMIO MMC driverGuennadi Liakhovetski
Add runtime and system-wide power management to the TMIO MMC driver in PIO and DMA modes, allowing it to properly save and restore its state during system suspend. Runtime PM is very crude ATM, because the controller has to be powered on all the time to detect card hotplug events. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sh_mmcif: protect against a theoretical raceGuennadi Liakhovetski
The MMC subsystem does not guarantee that host driver .request() and .set_ios() callbacks are serialised. Such concurrent calls, however, do not have to be meaningfully supported, drivers just have to make sure to avoid any severe problems. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Simon Horman <horms@verge.net.au> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdio: optimized SDIO IRQ handling for single irqStefan Nilsson XK
If there is only 1 function interrupt registered it is possible to improve performance by directly calling the irq handler and avoiding the overhead of reading the CCCR registers. Signed-off-by: Per Forlin <per.forlin@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: mmc_test: minor clean up, use t = &test.area everywhereAndy Shevchenko
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: card: fix potential null dereference of 'idata'Vladimir Motyka
When allocation of idata failed there was a null dereference. Also avoid calling kfree where it isn't needed. Signed-off-by: Vladimir Motyka <vladimir.motyka@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: add support for retuning mode 1Arindam Nath
Host Controller v3.00 can support retuning modes 1,2 or 3 depending on the bits 46-47 of the Capabilities register. Also, the timer count for retuning is indicated by bits 40-43 of the same register. We initialize timer_list for retuning the first time we execute tuning procedure. This condition is indicated by SDHCI_NEEDS_RETUNING not being set. Since retuning mode 1 sets a limit of 4MB on the maximum data length, we set max_blk_count appropriately. Once the tuning timer expires, we set SDHCI_NEEDS_RETUNING flag, and if the flag is set, we execute tuning procedure before sending the next command. We need to restore mmc_request structure after executing retuning procedure since host->mrq is used inside the procedure to send CMD19. We also disable and re-enable this flag during suspend and resume respectively, as per the spec v3.00. Tested by Zhangfei Gao with a Toshiba uhs card and general hs card, on mmp2 in SDMA mode. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mmc: sdhci: add support for programmable clock modeArindam Nath
Host Controller v3.00 supports programmable clock mode as an optional feature. The support for this mode is indicated by non-zero value in bits 48-55 of the Capabilities register. If supported, the actual value of Clock Multiplier is one more than the value provided in the bit fields. We only set Clock Generator Select (bit 5) and SDCLK Frequency Select (bits 8-15) of the Clock Control register in case Preset Value Enable is not set, otherwise these fields are automatically set by the Host Controller based on the UHS mode selected. Also, since the maximum and minimum clock frequency in this mode can be (Base Clock * Clock Mul) and (Base Clock * Clock Mul)/1024 respectively, f_max and f_min have been recalculated to reflect this change. Tested by Zhangfei Gao with a Toshiba uhs card and general hs card, on mmp2 in SDMA mode. Signed-off-by: Arindam Nath <arindam.nath@amd.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>