summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2020-12-15Merge tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Initial support for SD express card/host MMC host: - mxc: Convert the driver to DT-only - mtk-sd: Add HS400 enhanced strobe support - mtk-sd: Add support for the MT8192 SoC variant - sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040 - sdhci-esdhc-imx: Convert the driver to DT-only - sdhci-pci-gli: Improve performance for HS400 mode for GL9763E - sdhci-pci-gli: Reduce power consumption for GL9755 - sdhci-xenon: Introduce ACPI support - tmio: Fix command error processing - tmio: Inform the core about the max_busy_timeout - tmio/renesas_sdhi: Support custom calculation of busy-wait time - renesas_sdhi: Reset SCC only when available - rtsx_pci: Add SD Express mode support for RTS5261 - rtsx_pci: Various fixes and improvements for RTS5261 MEMSTICK: - Minor fixes/improvements" * tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits) dt-bindings: mmc: eliminate yamllint warnings mmc: sdhci-xenon: introduce ACPI support mmc: sdhci-xenon: use clk only with DT mmc: sdhci-xenon: switch to device_* API mmc: sdhci-xenon: use match data for controllers variants dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver mmc: renesas_sdhi: populate hook for longer busy_wait mmc: tmio: add hook for custom busy_wait calculation mmc: tmio: set max_busy_timeout dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E mmc: sdhci: Use more concise device_property_read_u64 memstick: r592: Fix error return in r592_probe() mmc: mxc: Convert the driver to DT-only mmc: mxs: Remove the unused .id_table mmc: sdhci-of-arasan: Fix fall-through warnings for Clang mmc: sdhci-pci-gli: Reduce power consumption for GL9755 mmc: mediatek: depend on COMMON_CLK to fix compile tests mmc: pxamci: Fix error return code in pxamci_probe mmc: sdhci: Update firmware interface API ...
2020-12-15Merge tag 'char-misc-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big char/misc driver update for 5.11-rc1. Continuing the tradition of previous -rc1 pulls, there seems to be more and more tiny driver subsystems flowing through this tree. Lots of different things, all of which have been in linux-next for a while with no reported issues: - extcon driver updates - habannalab driver updates - mei driver updates - uio driver updates - binder fixes and features added - soundwire driver updates - mhi bus driver updates - phy driver updates - coresight driver updates - fpga driver updates - speakup driver updates - slimbus driver updates - various small char and misc driver updates" * tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits) extcon: max77693: Fix modalias string extcon: fsa9480: Support TI TSU6111 variant extcon: fsa9480: Rewrite bindings in YAML and extend dt-bindings: extcon: add binding for TUSB320 extcon: Add driver for TI TUSB320 slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew() siox: Make remove callback return void siox: Use bus_type functions for probe, remove and shutdown spmi: Add driver shutdown support spmi: fix some coding style issues at the spmi core spmi: get rid of a warning when built with W=1 uio: uio_hv_generic: use devm_kzalloc() for private data alloc uio: uio_fsl_elbc_gpcm: use device-managed allocators uio: uio_aec: use devm_kzalloc() for uio_info object uio: uio_cif: use devm_kzalloc() for uio_info object uio: uio_netx: use devm_kzalloc() for or uio_info object uio: uio_mf624: use devm_kzalloc() for uio_info object uio: uio_sercos3: use device-managed functions for simple allocs uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers uio: uio_dmem_genirq: convert simple allocations to device-managed ...
2020-12-11mmc: sdhci-xenon: introduce ACPI supportMarcin Wojtas
Previous patches dropped the strict dependency on the OF_* in the sdhci-xenon driver. As a result the ACPI support can be introduced (except for the XENON_A3700 variant) by adding the necessary ID's in the acpi_match_table. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-5-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-11mmc: sdhci-xenon: use clk only with DTMarcin Wojtas
As a preparation for supporting ACPI, modify the driver to use the clk framework only when booting with DT - otherwise rely on the configuration done by firmware. For that purpose introduce also a custom SDHCI get_max_clock callback. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-4-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-11mmc: sdhci-xenon: switch to device_* APIMarcin Wojtas
In order to support both ACPI and DT, modify the driver to use device_* routines for obtaining the properties values. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-3-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-11mmc: sdhci-xenon: use match data for controllers variantsMarcin Wojtas
As a part of the ACPI support preparation resign from checking compatible strings in the driver. Instead of that use a new enum and assign the values to match data accordingly. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/20201204171626.10935-2-mw@semihalf.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-09misc: rtsx: rts5249 support runtime PMRicky Wu
rtsx_pcr: add callback functions to support runtime PM add delay_work to put device to D3 after idle over 10 sec rts5249: add extra init flow for rtd3 and set rtd3_en from config setting rtsx_pci_sdmmc: child device support autosuspend Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20201202065857.19412-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04Merge branch 'fixes' into nextUlf Hansson
2020-12-04mmc: mediatek: mark PM functions as __maybe_unusedArnd Bergmann
The #ifdef check for the suspend/resume functions is wrong: drivers/mmc/host/mtk-sd.c:2765:12: error: unused function 'msdc_suspend' [-Werror,-Wunused-function] static int msdc_suspend(struct device *dev) drivers/mmc/host/mtk-sd.c:2779:12: error: unused function 'msdc_resume' [-Werror,-Wunused-function] static int msdc_resume(struct device *dev) Remove the #ifdef and mark all four as __maybe_unused to aovid the problem. Fixes: c0a2074ac575 ("mmc: mediatek: Fix system suspend/resume support for CQHCI") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201203222922.1067522-1-arnd@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: block: Fixup condition for CMD13 polling for RPMB requestsBean Huo
The CMD13 polling is needed for commands with R1B responses. In commit a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response"), the intent was to introduce this for requests targeted to the RPMB partition. However, the condition to trigger the polling loop became wrong, leading to unnecessary polling. Let's fix the condition to avoid this. Fixes: a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response") Cc: stable@vger.kernel.org Reported-by: Zhan Liu <zliua@micron.com> Signed-off-by: Zhan Liu <zliua@micron.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20201202202320.22165-1-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: renesas_sdhi: populate hook for longer busy_waitWolfram Sang
Make use of the EXTOP bit in R-Car Gen3 SoCs to have a twice as large busy wait duration. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125213001.15003-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: tmio: add hook for custom busy_wait calculationWolfram Sang
Newer SDHI variants can 'wait while busy' longer than the generic TMIO. Provide a hook to get the maximum cycle count to wait for. If the hook is not populated, fall back to a generic version which works well with all older TMIO/SDHI variants. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125213001.15003-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: tmio: set max_busy_timeoutWolfram Sang
Set max_busy_timeouts for variants known to support the TOPxx bits in the SD_OPTION register. The timeout mechanism was running in the background but not yet properly handled in the driver. So, let the MMC core know when to not use R1B to avoid unhandled timeouts. My datasheets for older variants (tmio_mmc.c) suggest that they support it, too. However, actual bit descriptions are lacking, so I chose an opt-in approach. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125213001.15003-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04Merge branch 'fixes' into nextUlf Hansson
2020-12-04mmc: tmio: improve bringing HW to a sane state with MMC_POWER_OFFWolfram Sang
Further testing of error cases revealed that downgrade is not enough, so we need to reset the SCC which is done by calling the custom reset function. This reset function can distinguish between the various SDHI variants, so protecting the call with MIN_RCAR2 is enough here. Fixes: 24ce2d7b8bea ("mmc: tmio: bring tuning HW to a sane state with MMC_POWER_OFF") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201125204953.3344-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763EBen Chuang
The GL9763E uses 150Mhz (slow mode) by default in HS400 mode. In order to make HS400 mode run at 200Mhz, the slow mode needs to be turned off. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20201125110145.2824-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-12-04mmc: sdhci: Use more concise device_property_read_u64Jeremy Linton
Since we only need a single u64 the _array form is unnecessarily. Use device_property_read_u64 instead. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201125033630.603863-1-jeremy.linton@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: mxc: Convert the driver to DT-onlyFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201123203004.18792-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: mxs: Remove the unused .id_tableFabio Estevam
The mxs-mmc driver is only used by DT platforms and the .id_table is unused. Get rid of it to simplify the code. While at it, use of_device_get_match_data() to retrieve the driver data. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201123191956.10542-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: sdhci-of-arasan: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/387cab3a466038aa5d1fc34b8b6a7c4f693826ea.1605896060.git.gustavoars@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: sdhci-pci-gli: Reduce power consumption for GL9755Ben Chuang
For GL9755, reduce power consumption by lowering the LFCLK and disabling the DMACLK on low-power. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20201123053702.6083-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: mediatek: depend on COMMON_CLK to fix compile testsKrzysztof Kozlowski
The MFD_OMAP_USB_HOST uses Common Clock Framework thus it cannot be built on platforms without it (e.g. compile test on MIPS with LANTIQ): mips-linux-ld: drivers/mmc/host/mtk-sd.o: in function `msdc_ops_set_ios': mtk-sd.c:(.text+0x2bbc): undefined reference to `clk_get_parent' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201122120056.100045-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: pxamci: Fix error return code in pxamci_probeZhihao Cheng
Fix to return the error code from devm_gpiod_get_optional() instaed of 0 in pxamci_probe(). Fixes: f54005b508b9a9d9c ("mmc: pxa: Use GPIO descriptor for power") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20201121021431.3168506-1-chengzhihao1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: sdhci: Update firmware interface APIJeremy Linton
The device_* calls were added a few years ago to abstract DT/ACPI/fwnode firmware interfaces. Lets convert the two sdhci caps fields to use the generic calls rather than the OF specific ones. This has the side effect of allowing ACPI based devices to quirk themselves when the caps field is broken. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Link: https://lore.kernel.org/r/20201120233831.447365-1-jeremy.linton@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24Merge branch 'fixes' into nextUlf Hansson
2020-11-24mmc: sdhci-of-arasan: Fix clock registration error for Keem Bay SOCMuhammad Husaini Zulkifli
The commit 16ada730a759 ("mmc: sdhci-of-arasan: Modify clock operations handling") introduced support for platform specific clock operations. Around the same point in time the commit 36c6aadaae86 ("mmc: sdhci-of-arasan: Add support for Intel Keem Bay") was also merged. Unfortunate it was not really tested on top of the previously mentioned commit, which causes clock registration failures for Keem Bay SOC devices. Let's fix this, by properly declaring the clock operation for Keem Bay SOC devices. Fixes: 36c6aadaae86 ("mmc: sdhci-of-arasan: Add support for Intel Keem Bay") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20201118120120.24908-2-muhammad.husaini.zulkifli@intel.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: mediatek: Extend recheck_sdio_irq fix to more variantsyong mao
The SDIO recheck fix is required for more of the supported variants. Let's add it to those that needs it. Reported-by: Fabien Parent <fparent@baylibre.com> Reported-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Yong Mao <yong.mao@mediatek.com> Link: https://lore.kernel.org/r/20201119030237.9414-1-yong.mao@mediatek.com Fixes: 9e2582e57407 ("mmc: mediatek: fix SDIO irq issue") Cc: stable@vger.kernel.org [Ulf: Clarified commitmsg ] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: sdhci-st: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). This fixes compile warning (!CONFIG_OF on x86_64): drivers/mmc/host/sdhci-st.c:512:34: warning: ‘st_sdhci_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201120162344.485921-2-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-24mmc: sdhci-sprd: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). This fixes compile warning (!CONFIG_OF on x86_64): drivers/mmc/host/sdhci-sprd.c:723:34: warning: ‘sdhci_sprd_of_match’ defined but not used [-Wunused-const-variable=] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Link: https://lore.kernel.org/r/20201120162344.485921-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-23mmc: mediatek: Fix system suspend/resume support for CQHCIWenbin Mei
Before we got these errors on MT8192 platform: [ 59.153891] Restarting tasks ... [ 59.154540] done. [ 59.159175] PM: suspend exit [ 59.218724] mtk-msdc 11f60000.mmc: phase: [map:fffffffe] [maxlen:31] [final:16] [ 119.776083] mmc0: cqhci: timeout for tag 9 [ 119.780196] mmc0: cqhci: ============ CQHCI REGISTER DUMP =========== [ 119.786709] mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510 [ 119.793225] mmc0: cqhci: Config: 0x00000101 | Control: 0x00000000 [ 119.799706] mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000000 [ 119.806177] mmc0: cqhci: Int sig: 0x00000000 | Int Coal: 0x00000000 [ 119.812670] mmc0: cqhci: TDL base: 0x00000000 | TDL up32: 0x00000000 [ 119.819149] mmc0: cqhci: Doorbell: 0x003ffc00 | TCN: 0x00000200 [ 119.825656] mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 [ 119.832155] mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000 [ 119.838627] mmc0: cqhci: SSC2: 0x00000000 | DCMD rsp: 0x00000000 [ 119.845174] mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x0000891c [ 119.851654] mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 [ 119.865773] mmc0: cqhci: : =========================================== [ 119.872358] mmc0: running CQE recovery From these logs, we found TDL base was back to the default value. After suspend, the mmc host is powered off by HW, and bring CQE register to the default value, so we add system suspend/resume interface, then bring CQE to deactivated state before suspend, it will be enabled by CQE first request after resume. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Link: https://lore.kernel.org/r/20201118063405.24906-1-wenbin.mei@mediatek.com Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support") Cc: stable@vger.kernel.org [Ulf: Renamed functions] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-23mmc: tmio: Fix command error processingMasaharu Hayakawa
If some errors are detected at the same time as the access end interrupt, the access end interrupt was not cleared. Especially with DMA, because then the access end interrupt was never enabled and, thus, never cleared. Clear the interrupt register always when a command error occurs. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> [saito: rebase to v5.4] Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: rebase and extension of the commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20201117131337.35307-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-23mmc: sdhci-esdhc-imx: Convert the driver to DT-onlyFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20201117113750.25053-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17Merge branch 'fixes' into nextUlf Hansson
2020-11-17mmc: tmio: do not print real IOMEM pointerKrzysztof Kozlowski
Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/mmc/host/tmio_mmc.c:177 tmio_mmc_probe() warn: argument 3 to %08lx specifier is cast from pointer Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201116164252.44078-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: sdhci: tegra: fix wrong unit with busy_timeoutWolfram Sang
'busy_timeout' is in msecs, not in jiffies. Use the correct factor. Fixes: 5e958e4aacf4 ("sdhci: tegra: Implement Tegra specific set_timeout callback") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Sowjanya Komatineni <skomatineni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20201116132206.23518-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: sdhci-of-arasan: Issue DLL reset explicitlyManish Narani
In the current implementation DLL reset will be issued for each ITAP and OTAP setting inside ATF, this is creating issues in some scenarios and this sequence is not inline with the TRM. To fix the issue, DLL reset should be removed from the ATF and host driver will request it explicitly. This patch update host driver to explicitly request for DLL reset before ITAP (assert DLL) and after OTAP (release DLL) settings. Fixes: a5c8b2ae2e51 ("mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup") Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Manish Narani <manish.narani@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1605515565-117562-4-git-send-email-manish.narani@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: sdhci-of-arasan: Use Mask writes for Tap delaysManish Narani
Mask the ITAP and OTAP delay bits before updating with the new tap value for Versal platform. Fixes: 1a470721c8f5 ("sdhci: arasan: Add support for Versal Tap Delays") Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Manish Narani <manish.narani@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1605515565-117562-3-git-send-email-manish.narani@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: sdhci-of-arasan: Allow configuring zero tap valuesManish Narani
Allow configuring the Output and Input tap values with zero to avoid failures in some cases (one of them is SD boot mode) where the output and input tap values may be already set to non-zero. Fixes: a5c8b2ae2e51 ("mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup") Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Manish Narani <manish.narani@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1605515565-117562-2-git-send-email-manish.narani@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: host: Kconfig: fix spelling mistake "hardare" -> "hardware"Colin Ian King
There is a spelling mistake in the Kconfig file. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201114120819.416311-1-colin.king@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: sdhci-msm: detect if tassadar_dll is used by using core versionDmitry Baryshkov
Detect if tassadar_dll is required by using core version rather than just specifying it in the sdhci_msm_variant_info. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/20201112173636.360186-1-dmitry.baryshkov@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: sdhci-pci: Prefer SDR25 timing for High Speed mode for BYT-based Intel ↵Adrian Hunter
controllers A UHS setting of SDR25 can give better results for High Speed mode. This is because there is no setting corresponding to high speed. Currently SDHCI sets no value, which means zero which is also the setting for SDR12. There was an attempt to change this in sdhci.c but it caused problems for some drivers, so it was reverted and the change was made to sdhci-brcmstb in commit 2fefc7c5f7d16e ("mmc: sdhci-brcmstb: Fix incorrect switch to HS mode"). Several other drivers also do this. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v5.4+ Link: https://lore.kernel.org/r/20201112133656.20317-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-17mmc: mediatek: fix mem leak in msdc_drv_probeZheng Liang
It should use mmc_free_host to free mem in error patch of msdc_drv_probe. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Liang <zhengliang6@huawei.com> Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com> Link: https://lore.kernel.org/r/20201112092530.32446-1-zhengliang6@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: sort includesWolfram Sang
Better prevent double includes. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201111100244.15823-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: don't hardcode SDIF valuesWolfram Sang
Use a macro to name the hardcoded values. Also, move the SDIF register definition into the SDHI driver because this is an SDHI extension. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201111100244.15823-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: improve HOST_MODE usageWolfram Sang
HOST_MODE should have a CTL_ prefix, too. This makes the code more readable because we immediately know what it is. Also, remove the hardcoded values with something readable, too. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201111100244.15823-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: remove superfluous SCLKENWolfram Sang
All previously called functions handle SCLKEN on their own, no need to enable it again in sdhi_reset(). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201110162151.37622-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: merge the SCC reset functionsWolfram Sang
There is no user of renesas_sdhi_reset_scc() anymore, only renesas_sdhi_disable_scc() so merge these functions into one. I guess the seperation was cruft anyhow. The BSP doesn't have it anymore and I can't recall the reason we had it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201110162151.37622-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: clear TAPEN when resetting, tooWolfram Sang
We want to clear TAPEN in a software reset, too, to have a completely known state. Especially when we doing the initial reset during boot to clear previous firmware states. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201110162151.37622-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: simplify reset routine a littleWolfram Sang
The 'reset' pointer is only populated for Gen2+. So, we don't need to check for that flag inside the routine. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201110142058.36393-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: renesas_sdhi: populate SCC pointer at the proper placeWolfram Sang
The SCC pointer is currently filled whenever the SoC is Gen2+. This is wrong because there is a Gen2-variant without SCC (SDHI_VER_GEN2_SDR50). We have been lucky because the writes to unintended registers have not caused problems so far. But further refactoring work exposed the problem. So, move the pointer initialization to the place where we know that the SDHI instance supports tuning. And also populate the 'reset' pointer unconditionally to make sure the interrupt enable register is always properly set for Gen2+. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20201110142058.36393-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 06:28:10 +0000