summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2017-12-01Merge tag 'mmc-v4.15-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Ensure that debugfs files are removed properly - Fix missing blk_put_request() - Deal with errors from blk_get_request() - Rewind mmc bus suspend operations at failures - Prepend '0x' to ocr and pre_eol_info in sysfs to identify as hex MMC host: - sdhci-msm: Make it optional to wait for signal level changes - sdhci: Avoid swiotlb buffer being full" * tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: core: prepend 0x to OCR entry in sysfs mmc: core: prepend 0x to pre_eol_info entry in sysfs mmc: sdhci: Avoid swiotlb buffer being full mmc: sdhci-msm: Optionally wait for signal level changes mmc: block: Ensure that debugfs files are removed mmc: core: Do not leave the block driver in a suspended state mmc: block: Check return value of blk_get_request() mmc: block: Fix missing blk_put_request()
2017-11-29mmc: core: prepend 0x to OCR entry in sysfsBastian Stender
The sysfs entry "ocr" was missing the 0x prefix to identify it as hex formatted. Fixes: 5fb06af7a33b ("mmc: core: Extend sysfs with OCR register") Signed-off-by: Bastian Stender <bst@pengutronix.de> Cc: <stable@vger.kernel.org> # v4.8+ [Ulf: Amended change to also cover SD-cards] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-29mmc: core: prepend 0x to pre_eol_info entry in sysfsBastian Stender
The sysfs entry "pre_eol_info" was missing the 0x prefix to identify it as hex formatted. Fixes: 46bc5c408e4e ("mmc: core: Export device lifetime information through sysfs") Signed-off-by: Bastian Stender <bst@pengutronix.de> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-28mmc: sdhci: Avoid swiotlb buffer being fullUlf Hansson
The commit de3ee99b097d ("mmc: Delete bounce buffer handling") deletes the bounce buffer handling, but also causes the max_req_size for sdhci to be increased, in case when max_segs == 1. This causes errors for sdhci-pci Ricoh variant, about the swiotlb buffer to become full. Fix the issue, by taking IO_TLB_SEGSIZE and IO_TLB_SHIFT into account when deciding the max_req_size for sdhci. Reported-by: Jiri Slaby <jslaby@suse.cz> Fixes: de3ee99b097d ("mmc: Delete bounce buffer handling") Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Adrian Hunter <adrian.hunter@intel.com>
2017-11-23mmc: sdhci-msm: Optionally wait for signal level changesBjorn Andersson
Not all instances of the SDCC core supports changing signal voltage and as such will not generate a power interrupt when the software attempts to change the voltage. This results in probing the eMMC on some devices to take over 2 minutes. Check that the SWITCHABLE_SIGNALING_VOLTAGE bit in MCI_GENERICS is set before waiting for the power interrupt. Cc: Sahitya Tummala <stummala@codeaurora.org> Cc: Vijay Viswanath <vviswana@codeaurora.org> Fixes: c0309b3803fe ("mmc: sdhci-msm: Add sdhci msm register write APIs which wait for pwr irq") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-23mmc: block: Ensure that debugfs files are removedAdrian Hunter
The card is not necessarily being removed, but the debugfs files must be removed when the driver is removed, otherwise they will continue to exist after unbinding the card from the driver. e.g. # echo "mmc1:0001" > /sys/bus/mmc/drivers/mmcblk/unbind # cat /sys/kernel/debug/mmc1/mmc1\:0001/ext_csd [ 173.634584] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 173.643356] IP: mmc_ext_csd_open+0x5e/0x170 A complication is that the debugfs_root may have already been removed, so check for that too. Fixes: 627c3ccfb46a ("mmc: debugfs: Move block debugfs into block module") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org # 4.14+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-23mmc: core: Do not leave the block driver in a suspended stateAdrian Hunter
The block driver must be resumed if the mmc bus fails to suspend the card. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org # v3.19+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-23mmc: block: Check return value of blk_get_request()Adrian Hunter
blk_get_request() can fail, always check the return value. Fixes: 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver op") Fixes: 3ecd8cf23f88 ("mmc: block: move multi-ioctl() to use block layer") Fixes: 614f0388f580 ("mmc: block: move single ioctl() commands to block requests") Fixes: 627c3ccfb46a ("mmc: debugfs: Move block debugfs into block module") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-23mmc: block: Fix missing blk_put_request()Adrian Hunter
Ensure blk_get_request() is paired with blk_put_request(). Fixes: 0493f6fe5bde ("mmc: block: Move boot partition locking into a driver op") Fixes: 627c3ccfb46a ("mmc: debugfs: Move block debugfs into block module") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org # 4.13+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-13Merge tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Introduce host claiming by context to support blkmq - Preparations for enabling CQE (eMMC CMDQ) requests - Re-factorizations to prepare for blkmq support - Re-factorizations to prepare for CQE support - Fix signal voltage switch for SD cards without power cycle - Convert RPMB to a character device - Export eMMC revision via sysfs - Support eMMC DT binding for fixed driver type - Document mmc_regulator_get_supply() API MMC host: - omap_hsmmc: Updated regulator management for PBIAS - sdhci-omap: Add new OMAP SDHCI driver - meson-mx-sdio: New driver for the Amlogic Meson8 and Meson8b SoCs - sdhci-pci: Add support for Intel CDF - sdhci-acpi: Fix voltage switch for some Intel host controllers - sdhci-msm: Enable delay circuit calibration clocks - sdhci-msm: Manage power IRQ properly - mediatek: Add support of mt2701/mt2712 - mediatek: Updates management of clocks and tunings - mediatek: Upgrade eMMC HS400 support - rtsx_pci: Update tuning for gen3 PCI-Express - renesas_sdhi: Support R-Car Gen[123] fallback compatibility strings - Catch all errors when getting regulators - Various additional improvements and cleanups" * tag 'mmc-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (91 commits) sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attribute dt-bindings: sdhci-fujitsu: document cmd-dat-delay property mmc: tmio: Replace msleep() of 20ms or less with usleep_range() mmc: dw_mmc: Convert timers to use timer_setup() mmc: dw_mmc: Cleanup the DTO timer like the CTO one mmc: vub300: Use common code in __download_offload_pseudocode() mmc: tmio: Use common error handling code in tmio_mmc_host_probe() mmc: Convert timers to use timer_setup() mmc: sdhci-acpi: Fix voltage switch for some Intel host controllers mmc: sdhci-acpi: Let devices define their own private data mmc: mediatek: perfer to use rise edge latching for cmd line mmc: mediatek: improve eMMC hs400 mode read performance mmc: mediatek: add latch-ck support mmc: mediatek: add support of source_cg clock mmc: mediatek: add stop_clk fix and enhance_rx support mmc: mediatek: add busy_check support mmc: mediatek: add async fifo and data tune support mmc: mediatek: add pad_tune0 support mmc: mediatek: make hs400_tune_response only for mt8173 arm64: dts: mt8173: remove "mediatek, mt8135-mmc" from mmc nodes ...
2017-11-07sdhci-fujitsu: add support for setting the CMD_DAT_DELAY attributeArd Biesheuvel
The Socionext SynQuacer SoC inherits this IP from Fujitsu, but requires the F_SDH30_CMD_DAT_DELAY bit to be set in the F_SDH30_ESD_CONTROL control register. So set this bit if the DT node has the 'fujitsu,cmd-dat-delay-select' property. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-07mmc: tmio: Replace msleep() of 20ms or less with usleep_range()Masaharu Hayakawa
As documented in Documentation/timers/timers-howto.txt as follows, replace msleep() with usleep_range(). msleep(1~20) may not do what the caller intends, and will often sleep longer (~20 ms actual sleep for any value given in the 1~20ms range). In many cases this is not the desired behavior. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-03Merge tag 'mmc-v4.14-rc4-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "Fix dw_mmc request timeout issues" * tag 'mmc-v4.14-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: Fix the DTO timeout calculation mmc: dw_mmc: Add locking to the CTO timer mmc: dw_mmc: Fix the CTO timeout calculation mmc: dw_mmc: cancel the CTO timer after a voltage switch
2017-11-02Merge tag 'spdx_identifiers-4.14-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull initial SPDX identifiers from Greg KH: "License cleanup: add SPDX license identifiers to some files Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: License cleanup: add SPDX license identifier to uapi header files with a license License cleanup: add SPDX license identifier to uapi header files with no license License cleanup: add SPDX GPL-2.0 license identifier to files with no license
2017-11-02mmc: dw_mmc: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: dw_mmc: Cleanup the DTO timer like the CTO oneDouglas Anderson
The recent CTO timer introduced in commit 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") was causing observable problems due to race conditions. Previous patches have fixed those race conditions. It can be observed that these same race conditions ought to be theoretically possible with the DTO timer too though they are massively less likely to happen because the data timeout is always set to 0xffffff right now. That means even at a 200 MHz card clock we were arming the DTO timer for 94 ms: >>> (0xffffff * 1000. / 200000000) + 10 93.886075 We always also were setting the DTO timer _after_ starting the transfer, unlike how the old code was seting the CTO timer. In any case, even though the DTO timer is much less likely to have races, it still makes sense to add code to handle it _just in case_. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02Merge branch 'fixes' into nextUlf Hansson
2017-11-02mmc: vub300: Use common code in __download_offload_pseudocode()Markus Elfring
Add a jump target so that a specific string copy operation is stored only once at the end of this function implementation. Replace two calls of the function "strncpy" by goto statements. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: tmio: Use common error handling code in tmio_mmc_host_probe()Markus Elfring
* Add a jump target so that a bit of exception handling can be better reused at the end of this function. * Adjust condition checks. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: Convert timers to use timer_setup()Kees Cook
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Allen <allen.lkml@gmail.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: sdhci-acpi: Fix voltage switch for some Intel host controllersAdrian Hunter
Some Intel host controllers use an ACPI device-specific method to ensure correct voltage switching. Fix voltage switch for those, by adding a call to the DSM. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: sdhci-acpi: Let devices define their own private dataAdrian Hunter
Let devices define their own private data to facilitate device-specific operations. The size of the private structure is specified in the sdhci_acpi_slot structure, then sdhci_acpi_probe() will allocate extra space for it, and sdhci_acpi_priv() can be used to get a reference to it. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: perfer to use rise edge latching for cmd lineChaotian Jing
data lines have applied to perfer to use rise edge, also need apply it to cmd line. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: improve eMMC hs400 mode read performanceChaotian Jing
enlarge outstanding value to improve read performance Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: add latch-ck supportChaotian Jing
some platform(eg.mt2701) does not support "stop clk fix", in this case, need set correct latch-ck to avoid crc error caused by stop clock block-internally. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: add support of source_cg clockChaotian Jing
source clock need an independent cg to control, when doing clk mode switch, need gate source clock to avoid hw issue(multi-bit sync hw hang) Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: add stop_clk fix and enhance_rx supportChaotian Jing
mt2712 supports stop_clk fix and enhance_rx, which can improve host stability. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: add busy_check supportChaotian Jing
bit7 of PATCH_BIT1 has different meaning in new design, to compatible with previous platform, clear this bit in new platform. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: add async fifo and data tune supportChaotian Jing
mt2701/mt2712 supports async fifo & data tune, which can improve host stability. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: add pad_tune0 supportChaotian Jing
from mt2701, the register of PAD_TUNE has been phased out, while there is a new register of PAD_TUNE0 Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02mmc: mediatek: make hs400_tune_response only for mt8173Chaotian Jing
the origin design of hs400_tune_response is for mt8173 because of mt8173 has a special design. for doing that, we add a new member "compatible", by now it's only for mt8173. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01mmc: dw_mmc: Fix the DTO timeout calculationDouglas Anderson
Just like the CTO timeout calculation introduced recently, the DTO timeout calculation was incorrect. It used "bus_hz" but, as far as I can tell, it's supposed to use the card clock. Let's account for the div value, which is documented as 2x the value stored in the register, or 1 if the register is 0. NOTE: This was likely not terribly important until commit 16a34574c6ca ("mmc: dw_mmc: remove the quirks flags") landed because "DIV" is documented on Rockchip SoCs (the ones that used to define the quirk) to always be 0 or 1. ...and, in fact, it's documented to only be 1 with EMMC in 8-bit DDR52 mode. Thus before the quirk was applied to everyone it was mostly OK to ignore the DIV value. I haven't personally observed any problems that are fixed by this patch but I also haven't tested this anywhere with a DIV other an 0. AKA: this problem was found simply by code inspection and I have no failing test cases that are fixed by it. Presumably this could fix real bugs for someone out there, though. Fixes: 16a34574c6ca ("mmc: dw_mmc: remove the quirks flags") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: dw_mmc: Add locking to the CTO timerDouglas Anderson
This attempts to instill a bit of paranoia to the code dealing with the CTO timer. It's believed that this will make the CTO timer more robust in the case that we're having very long interrupt latencies. Note that I originally thought that perhaps this patch was being overly paranoid and wasn't really needed, but then while I was running mmc_test on an rk3399 board I saw one instance of the message: dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency I had debug prints in the CTO timer code and I found that it was running CMD 13 at the time. ...so even though this patch seems like it might be overly paranoid, maybe it really isn't? Presumably the bad interrupt latency experienced was due to the fact that I had serial console enabled as serial console is typically where I place blame when I see absurdly large interrupt latencies. In this particular case there was an (unrelated) printout to the serial console just before I saw the "Unexpected interrupt latency" printout. ...and actually, I managed to even reproduce the problems by running "iw mlan0 scan > /dev/null" while mmc_test was running. That not only does a bunch of PCIe traffic but it also (on my system) outputs some SELinux log spam. Fixes: 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") Tested-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: dw_mmc: Fix the CTO timeout calculationDouglas Anderson
In the commit 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") we tried to calculate the expected hardware command timeout value. Unfortunately that calculation isn't quite correct in all cases. It used "bus_hz" but, as far as I can tell, it's supposed to use the card clock. Let's account for the div value, which is documented as 2x the value stored in the register, or 1 if the register is 0. NOTE: It's not expected that this will actually fix anything important since the 10 ms margin added by the function will pretty much dwarf any calculations. The card clock should be 100 kHz at minimum and: 1000 ms/s * (255 * 2) / 100000 Hz. Gives us 5.1 ms. ...so really the point of this patch is just to make the code more "correct" in case anyone ever tries to remove the 10 ms buffer. Fixes: 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: dw_mmc: cancel the CTO timer after a voltage switchDouglas Anderson
When running with the commit 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") I found this message in the log: Unexpected command timeout, state 7 It turns out that we weren't properly cancelling the new CTO timer in the case that a voltage switch was done. Let's promote the cancel into the dw_mci_cmd_interrupt() function to fix this. Fixes: 03de19212ea3 ("mmc: dw_mmc: introduce timer for broken command transfer over scheme") Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mediatek: add support of mt2701/mt2712Chaotian Jing
mt2701/mt2712 has 12bit clock div, which is not compatible with mt8135/mt8173. and, some additional features will be added in mt2701/mt2712, so that need distinguish it by comatibale name. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: sdhci-pci: Tidy o2micro definitionsAdrian Hunter
We keep PCI Ids in sdhci-pci.h and the O2-specific definitions belong in sdhci-pci-o2micro.c. Move those definitions accordingly. Remove unused O2 definitions in sdhci-pci-core.c. The 3 o2micro external function declarations might as well be in sdhci-pci.h as well, so move them there and get rid of sdhci-pci-o2micro.h entirely. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: sdhci-acpi: Tidy Intel slot probe functions into oneAdrian Hunter
Tidy Intel slot probe functions into one. A single function can be used because the logic uses hid / uid as necessary to identify devices anyway. This gets rid of some pointless comments and checks for variables that cannot possibly be NULL, as well as giving the function a name that identifies it as specific to Intel controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: sdhci-acpi: Use helper function acpi_device_uid()Adrian Hunter
Make use of acpi_device_uid() instead of open coding. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: renesas_sdhi: implement R-Car Gen[123] fallback compatibility stringsSimon Horman
Implement fallback compatibility strings for R-Car Gen 1, 2 and 3. In the case of Renesas R-Car hardware we know that there are generations of SoCs, f.e. Gen 1 and 2. But beyond that its not clear what the relationship between IP blocks might be. For example, I believe that r8a7790 is older than r8a7791 but that doesn't imply that the latter is a descendant of the former or vice versa. We can, however, by examining the documentation and behaviour of the hardware at run-time observe that the current driver implementation appears to be compatible with the IP blocks on SoCs within a given generation. For the above reasons and convenience when enabling new SoCs a per-generation fallback compatibility string scheme is being adopted for drivers for Renesas SoCs. Also, improve readability by listing the shmobile fallback compatibility string after the more-specific compatibility strings they provide a fallback for. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: parse new binding for eMMC fixed driver typeWolfram Sang
Parse the new binding and store it in the host struct after doing some sanity checks. The code is designed to support fixed SD driver type if we ever need that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: usdhi6rol0: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: sdhci: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: omap_hsmmc: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mxcmmc: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mtk-sd: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: mmci: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-10-30mmc: meson-mx-sdio: catch all errors when getting regulatorsWolfram Sang
Bail out everytime when mmc_regulator_get_supply() returns an errno, not only when probing gets deferred. This is currently a no-op, because this function only returns -EPROBE_DEFER or 0 right now. But if it will throw another error somewhen, it will be for a reason. (This still doesn't change that getting regulators is optional, so 0 can still mean no regulators found). So, let us a) be future proof and b) have driver code which is easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>