summaryrefslogtreecommitdiff
path: root/drivers/mmc/host
AgeCommit message (Collapse)Author
2019-12-16mmc: renesas_sdhi: remove 4taps as a TMIO flagWolfram Sang
Now that the quirks structure is accessible, we can remove the TMIO flag for HS400 using only 4 taps. This is Renesas specific anyhow. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203200513.1758-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: renesas_sdhi: make quirks info accessible outside probe()Wolfram Sang
We will need that for a later patch. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203200513.1758-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: renesas_sdhi: make warning more preciseWolfram Sang
The warning is not solely used for SDR104 anymore, but for all which require tuning. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203200513.1758-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: renesas_sdhi: keep sorting for quirk entriesWolfram Sang
The two devices next to each other are super similar, but still, let's keep the alphanumeric sorting for easier additions later. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203200513.1758-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: renesas_sdhi: remove whitelist for internal DMACWolfram Sang
We know now that there won't be Gen3 SoCs with both, SYS-DMAC and internal DMAC. We removed the blacklisting for SYS-DMAC already, so we can remove the whitelisting for internal DMAC, too. This makes adding new SoCs easier. We keep the quirk handling, of course. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203194859.917-1-wsa@the-dreams.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: sdhci: fix up CMD12 sendingYangbo Lu
The STOP command is disabled for multiple blocks r/w commands with auto CMD12, when start to send. However, if there is data error, software still needs to send CMD12 according to SD spec. This patch is to allow software CMD12 sending for this case. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20191114111814.35199-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: spi: Toggle SPI polarity, do not hardcode itLinus Walleij
The code in mmc_spi_initsequence() tries to send a burst with high chipselect and for this reason hardcodes the device into SPI_CS_HIGH. This is not good because the SPI_CS_HIGH flag indicates logical "asserted" CS not always the physical level. In some cases the signal is inverted in the GPIO library and in that case SPI_CS_HIGH is already set, and enforcing SPI_CS_HIGH again will actually drive it low. Instead of hard-coding this, toggle the polarity so if the default is LOW it goes high to assert chipselect but if it is already high then toggle it low instead. Cc: Phil Elwell <phil@raspberrypi.org> Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191204152749.12652-1-linus.walleij@linaro.org Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: sdhci-of-at91: rework clocks management to support SAM9x60 deviceLudovic Desroches
In the SAM9x60 SoC, there are only two clocks instead of three for the SDHCI device. The base clk is no longer provided, it is generated internally from the mult clk. The values of the base clk and mul in the capabilities registers may not reflect the reality as the mult clk is a programmable clock which can take several rates. As we can't trust those values, take them from the clock tree and update the capabilities according to. As we can have the same pitfall, in some cases, with the SAMA5D2 Soc, stop relying on capabilities too. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20191128074522.69706-2-ludovic.desroches@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-27Merge tag 'driver-core-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 5.5-rc1 There's a few minor cleanups and fixes in here, but the majority of the patches in here fall into two buckets: - debugfs api cleanups and fixes - driver core device link support for boot dependancy issues The debugfs api cleanups are working to slowly refactor the debugfs apis so that it is even harder to use incorrectly. That work has been happening for the past few kernel releases and will continue over time, it's a long-term project/goal The driver core device link support missed 5.4 by just a bit, so it's been sitting and baking for many months now. It's from Saravana Kannan to help resolve the problems that DT-based systems have at boot time with dependancy graphs and kernel modules. Turns out that no one has actually tried to build a generic arm64 kernel with loads of modules and have it "just work" for a variety of platforms (like a distro kernel). The big problem turned out to be a lack of dependency information between different areas of DT entries, and the work here resolves that problem and now allows devices to boot properly, and quicker than a monolith kernel. All of these patches have been in linux-next for a long time with no reported issues" * tag 'driver-core-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (68 commits) tracing: Remove unnecessary DEBUG_FS dependency of: property: Add device link support for interrupt-parent, dmas and -gpio(s) debugfs: Fix !DEBUG_FS debugfs_create_automount of: property: Add device link support for "iommu-map" of: property: Fix the semantics of of_is_ancestor_of() i2c: of: Populate fwnode in of_i2c_get_board_info() drivers: base: Fix Kconfig indentation firmware_loader: Fix labels with comma for builtin firmware driver core: Allow device link operations inside sync_state() driver core: platform: Declare ret variable only once cpu-topology: declare parse_acpi_topology in <linux/arch_topology.h> crypto: hisilicon: no need to check return value of debugfs_create functions driver core: platform: use the correct callback type for bus_find_device firmware_class: make firmware caching configurable driver core: Clarify documentation for fwnode_operations.add_links() mailbox: tegra: Fix superfluous IRQ error message net: caif: Fix debugfs on 64-bit platforms mac80211: Use debugfs_create_xul() helper media: c8sectpfe: no need to check return value of debugfs_create functions of: property: Add device link support for iommus, mboxes and io-channels ...
2019-11-27Merge tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "These are the updates for MMC and MEMSTICK for v5.5. Note that this also contains quite some additional changes reaching beyond both the MMC and MEMSTICK subsystems. This is primarily because of fixing an old regression for a WiFi driver based on the SDIO interface on an OMAP openpandora board MMC core: - Add CMD13 polling for MMC IOCTLS with R1B response. - Add common DT properties for clk-phase-delays for various speed modes. - Fix size overflow for mmc gp-partitions. - Re-work HW reset for SDIO cards, which also includes a re-work for Marvell's WiFi mwifiex SDIO func driver. MMC host: - jz4740: Add support for X1000 and JZ4760. - jz4740: Add support for 8-bit bus and for low power mode. - mmci: Add support for HW busy timeout for the stm32_sdmmc variant. - owl-mmc: Add driver for Actions Semi Owl SoCs SD/MMC controller. - renesas_sdhi: Add support for r8a774b1. - sdhci_am654: Add support for Command Queuing Engine for J721E. - sdhci-milbeaut: Add driver for the Milbeaut SD controller. - sdhci-of-arasan: Add support for ZynqMP tap-delays. - sdhci-of-arasan: Add support for clk-phase-delays for SD cards. - sdhci-of-arasan: Add support for Intel LGM SDXC. - sdhci-of-aspeed: Allow inversion of the internal card detect signal. - sdhci-of-esdhc: Fixup workaround for erratum A-008171 for tunings. - sdhci-of-at91: Improve support for calibration. - sdhci-pci: Add support for Intel JSL. - sdhci-pci: Add quirk for AMD SDHC Device 0x7906. - tmio: Enable support for erase/discard/trim requests. MMC/OMAP/pandora/wl1251: The TI wl1251 WiFi driver for SDIO on the OMAP openpandora board has been broken since v4.7. To fix the problems, changes have been made cross subsystems, but also to OMAP2 machine code and to openpandora DTS files, as summarized below. Relevant changes have been tagged for stable. - mmc/wl1251: Re-introduce lost SDIO quirks and vendor-id for wl1251 - omap/omap_hsmmc: Remove redundant platform config for openpandora - omap_hsmmc: Initialize non-std SDIO card for wl1251 for pandora - omap/dts/pandora: Specify wl1251 through a child node of mmc3 - wl1251: Add devicetree support for TI wl1251 SDIO" * tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (73 commits) dt-bindings: mmc: Correct the type of the clk phase properties Revert "mmc: tmio: remove workaround for NON_REMOVABLE" memstick: Fix Kconfig indentation mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller firmware: xilinx: Add SDIO Tap Delay nodes mmc: sdhci-of-arasan: Add support to set clock phase delays for SD dt-bindings: mmc: Add optional generic properties for mmc mmc: sdhci-of-arasan: Add sampling clock for a phy to use dt-bindings: mmc: arasan: Update Documentation for the input clock mmc: sdhci-of-arasan: Separate out clk related data to another structure mmc: sdhci: Fix grammar in warning message mmc: sdhci-of-aspeed: add inversion signal presence mmc: sdhci-of-aspeed: enable CONFIG_MMC_SDHCI_IO_ACCESSORS mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E mmc: core: Fix size overflow for mmc partitions mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition mmc: core: fix wl1251 sdio quirks ...
2019-11-26Merge tag 'acpi-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20191018, add support for EFI specific purpose memory, update the ACPI EC driver to make it work on systems with hardware-reduced ACPI, improve ACPI-based device enumeration for some platforms, rework the lid blacklist handling in the button driver and add more lid quirks to it, unify ACPI _HID/_UID matching, fix assorted issues and clean up the code and documentation. Specifics: - Update the ACPICA code in the kernel to upstream revision 20191018 including: * Fixes for Clang warnings (Bob Moore) * Fix for possible overflow in get_tick_count() (Bob Moore) * Introduction of acpi_unload_table() (Bob Moore) * Debugger and utilities updates (Erik Schmauss) * Fix for unloading tables loaded via configfs (Nikolaus Voss) - Add support for EFI specific purpose memory to optionally allow either application-exclusive or core-kernel-mm managed access to differentiated memory (Dan Williams) - Fix and clean up processing of the HMAT table (Brice Goglin, Qian Cai, Tao Xu) - Update the ACPI EC driver to make it work on systems with hardware-reduced ACPI (Daniel Drake) - Always build in support for the Generic Event Device (GED) to allow one kernel binary to work both on systems with full hardware ACPI and hardware-reduced ACPI (Arjan van de Ven) - Fix the table unload mechanism to unregister platform devices created when the given table was loaded (Andy Shevchenko) - Rework the lid blacklist handling in the button driver and add more lid quirks to it (Hans de Goede) - Improve ACPI-based device enumeration for some platforms based on Intel BayTrail SoCs (Hans de Goede) - Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and prevent handlers from being registered for unhandled PMIC OpRegions (Hans de Goede) - Unify ACPI _HID/_UID matching (Andy Shevchenko) - Clean up documentation and comments (Cao jin, James Pack, Kacper Piwiński)" * tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) ACPI: OSI: Shoot duplicate word ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory ACPICA: Update version to 20191018 ACPICA: debugger: remove leading whitespaces when converting a string to a buffer ACPICA: acpiexec: initialize all simple types and field units from user input ACPICA: debugger: add field unit support for acpi_db_get_next_token ...
2019-11-26Merge branches 'acpi-utils', 'acpi-platform', 'acpi-video' and 'acpi-doc'Rafael J. Wysocki
* acpi-utils: iommu/amd: Switch to use acpi_dev_hid_uid_match() mmc: sdhci-acpi: Switch to use acpi_dev_hid_uid_match() ACPI / LPSS: Switch to use acpi_dev_hid_uid_match() ACPI / utils: Introduce acpi_dev_hid_uid_match() helper ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI ACPI / utils: Describe function parameters in kernel-doc * acpi-platform: ACPI: platform: Unregister stale platform devices ACPI: Always build evged in * acpi-video: ACPI: video: update doc for acpi_video_bus_DOS() * acpi-doc: ACPI: Documentation: Minor spelling fix in namespace.rst
2019-11-26Merge branches 'pm-sleep', 'pm-domains', 'pm-opp' and 'powercap'Rafael J. Wysocki
* pm-sleep: PM / wakeirq: remove unnecessary parentheses PM / core: Clean up some function headers in power.h PM / hibernate: memory_bm_find_bit(): Tighten node optimisation * pm-domains: PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch() mmc: tmio: Avoid boilerplate code in ->runtime_suspend() PM / Domains: Implement the ->start() callback for genpd PM / Domains: Introduce dev_pm_domain_start() * pm-opp: PM / OPP: Support adjusting OPP voltages at runtime * powercap: powercap/intel_rapl: add support for Cometlake desktop powercap/intel_rapl: add support for CometLake Mobile
2019-11-21Revert "mmc: tmio: remove workaround for NON_REMOVABLE"Wolfram Sang
This reverts commit 7a7dab237027939cb95dc07c4647b80bad5fbbde. We found out that there is still a race with RuntimePM. This can lead to a hang when accessing the eMMC in some situations. Revert this change until the RPM issue is fixed. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays SetupManish Narani
Apart from taps set by auto tuning, ZynqMP platform has feature to set the tap values manually. Add support to set tap delay values in HW via ZynqMP SoC framework. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci-of-arasan: Add support to set clock phase delays for SDManish Narani
Add support to read Clock Phase Delays from the DT and set it via clk_set_phase() API from clock framework. Some of the controllers might have their own handling of setting clock delays, for this keep the set_clk_delays as function pointer which can be assigned controller specific handling of the same. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci-of-arasan: Add sampling clock for a phy to useManish Narani
There are some operations like setting the clock delays may need to have two clocks, one for output path and one for input path. Adding input path clock for some phys to use. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci-of-arasan: Separate out clk related data to another structureManish Narani
To improve the code readability, use two different structs, one for clock provider data and one for mmc platform data. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci: Fix grammar in warning messageFabio Estevam
The correct form is "did not become", so fix it accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci-of-aspeed: add inversion signal presenceIvan Mikhaylov
Add read_l callback in sdhci_ops with flipping of SDHCI_CARD_PRESENT bit in case of inverted card detection signal. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci-of-aspeed: enable CONFIG_MMC_SDHCI_IO_ACCESSORSIvan Mikhaylov
Enable CONFIG_MMC_SDHCI_IO_ACCESSORS for the ASPEED MMC driver. The read_l callback is used for inverted card detection. Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-20mmc: sdhci_am654: Add Support for Command Queuing Engine to J721EFaiz Abbas
Add Support for CQHCI (Command Queuing Host Controller Interface) for each of the host controllers present in TI's J721E devices. Add cqhci_ops and a .irq() callback to handle cqhci specific interrupts. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-18mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requestsEugeniu Rosca
Isolated initially to renesas_sdhi_internal_dmac [1], Ulf suggested adding MMC_CAP_ERASE to the TMIO mmc core: On Fri, Nov 15, 2019 at 10:27:25AM +0100, Ulf Hansson wrote: -- snip -- This test and due to the discussions with Wolfram and you in this thread, I would actually suggest that you enable MMC_CAP_ERASE for all tmio variants, rather than just for this particular one. In other words, set the cap in tmio_mmc_host_probe() should be fine, as it seems none of the tmio variants supports HW busy detection at this point. -- snip -- Testing on R-Car H3ULCB-KF doesn't reveal any issues (v5.4-rc7): root@rcar-gen3:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 59.2G 0 disk <--- eMMC mmcblk0boot0 179:8 0 4M 1 disk mmcblk0boot1 179:16 0 4M 1 disk mmcblk1 179:24 0 30G 0 disk <--- SD card root@rcar-gen3:~# time blkdiscard /dev/mmcblk0 real 0m8.659s user 0m0.001s sys 0m1.920s root@rcar-gen3:~# time blkdiscard /dev/mmcblk1 real 0m1.176s user 0m0.001s sys 0m0.124s [1] https://lore.kernel.org/linux-renesas-soc/20191112134808.23546-1-erosca@de.adit-jv.com/ Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com> Originally-by: Harish Jenny K N <harish_kandiga@mentor.com> Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-15mmc: host: omap-hsmmc: remove init_card pdata callback from pdataH. Nikolaus Schaller
Now as we have removed the last user (pandora_wl1251_init_card) of this callback, we can remove it from the hsmmc code. Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-15mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of ↵H. Nikolaus Schaller
pandora_wl1251_init_card Pandora_wl1251_init_card was used to do special pdata based setup of the sdio mmc interface. This does no longer work with v4.7 and later. A fix requires a device tree based mmc3 setup. Therefore we move the special setup to omap_hsmmc.c instead of calling some pdata supplied init_card function. The new code checks for a DT child node compatible to wl1251 so it will not affect other MMC3 use cases. Generally, this code was and still is a hack and should be moved to mmc core to e.g. read such properties from optional DT child nodes. Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: <stable@vger.kernel.org> # v4.7+ [Ulf: Fixed up some checkpatch complaints] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-14Merge branch 'fixes' into nextUlf Hansson
2019-11-14mmc: moxart: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-14mmc: atmel-mci: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-14mmc: mmc_spi: Use proper debounce time for CD GPIOThierry Reding
According to the comment, board files used to specify 1 ms for the debounce time. gpiod_set_debounce() needs the debounce time to be specified in units of microseconds, so make sure to multiply the value by 1000. Note that, according to the git log, the board files actually did specify 1 us for bounce times, but that seems really low. Device tree bindings for this type of GPIO typically specify the debounce times in milliseconds, so setting this default value to 1 ms seems like it would be somewhat safer. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Pavel Machek <pavel@denx.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-14mmc: sdhci-of-at91: fix quirk2 overwriteEugen Hristev
The quirks2 are parsed and set (e.g. from DT) before the quirk for broken HS200 is set in the driver. The driver needs to enable just this flag, not rewrite the whole quirk set. Fixes: 7871aa60ae00 ("mmc: sdhci-of-at91: add quirk for broken HS200") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: vub300: Drop redundant host ops ->init_card()Ulf Hansson
The ->init_card() host ops is printing message to the log, without actually doing something useful. Let's just drop this code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: renesas_sdhi_internal_dmac: Add r8a774b1 supportBiju Das
This patch adds SDHI support for RZ/G2N (R8A774B1) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-of-esdhc: fix up erratum A-008171 workaroundYangbo Lu
A previous patch implemented an incomplete workaround of erratum A-008171. The complete workaround is as below. This patch is to implement the complete workaround which uses SW tuning if HW tuning fails, and retries both HW/SW tuning once with reduced clock if workaround fails. This is suggested by hardware team, and the patch had been verified on LS1046A eSDHC + Phison 32G eMMC which could trigger the erratum. Workaround: /* For T1040, T2080, LS1021A, T1023 Rev 1: */ 1. Program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO. 2. Program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO. 3. Program the software tuning mode by setting TBCTL[TB_MODE] = 2'h3. 4. Set SYSCTL2[EXTN] and SYSCTL2[SAMPCLKSEL]. 5. Issue SEND_TUNING_BLK Command (CMD19 for SD, CMD21 for MMC). 6. Wait for IRQSTAT[BRR], buffer read ready, to be set. 7. Clear IRQSTAT[BRR]. 8. Check SYSCTL2[EXTN] to be cleared. 9. Check SYSCTL2[SAMPCLKSEL], Sampling Clock Select. It's set value indicate tuning procedure success, and clear indicate failure. In case of tuning failure, fixed sampling scheme could be used by clearing TBCTL[TB_EN]. /* For LS1080A Rev 1, LS2088A Rev 1.0, LA1575A Rev 1.0: */ 1. Read the TBCTL[31:0] register. Write TBCTL[11:8]=4'h8 and wait for 1ms. 2. Read the TBCTL[31:0] register and rewrite again. Wait for 1ms second. 3. Read the TBSTAT[31:0] register twice. 3.1 Reset data lines by setting ESDHCCTL[RSTD] bit. 3.2 Check ESDHCCTL[RSTD] bit. 3.3 If ESDHCCTL[RSTD] is 0, go to step 3.4 else go to step 3.2. 3.4 Write 32'hFFFF_FFFF to IRQSTAT register. 4. if TBSTAT[15:8]-TBSTAT[7:0] > 4*DIV_RATIO or TBSTAT[7:0]-TBSTAT[15:8] > 4*DIV_RATIO , then program TBPTR[TB_WNDW_END_PTR] = 4*DIV_RATIO and program TBPTR[TB_WNDW_START_PTR] = 8*DIV_RATIO. /* For LS1012A Rev1, LS1043A Rev 1.x, LS1046A 1.0: */ 1. Read the TBCTL[0:31] register. Write TBCTL[20:23]=4'h8 and wait for 1ms. 2. Read the TBCTL[0:31] register and rewrite again. Wait for 1ms second. 3. Read the TBSTAT[0:31] register twice. 3.1 Reset data lines by setting ESDHCCTL[RSTD] bit. 3.2 Check ESDHCCTL[RSTD] bit. 3.3 If ESDHCCTL[RSTD] is 0, go to step 3.4 else go to step 3.2. 3.4 Write 32'hFFFF_FFFF to IRQSTAT register. 4. if TBSTAT[16:23]-TBSTAT[24:31] > 4*DIV_RATIO or TBSTAT[24:31]- TBSTAT[16:23] > 4* DIV_RATIO , then program TBPTR[TB_WNDW_END_PTR] = 4*DIV_RATIO and program TBPTR[TB_WNDW_START_PTR] = 8*DIV_RATIO. /* For LS1080A Rev 1, LS2088A Rev 1.0, LA1575A Rev 1.0 LS1012A Rev1, * LS1043A Rev 1.x, LS1046A 1.0: */ 5. else program TBPTR[TB_WNDW_END_PTR] = 3*DIV_RATIO and program TBPTR[TB_WNDW_START_PTR] = 5*DIV_RATIO. 6. Program the software tuning mode by setting TBCTL[TB_MODE] = 2'h3. 7. Set SYSCTL2[EXTN], wait 1us and SYSCTL2[SAMPCLKSEL]. 8. Issue SEND_TUNING_BLK Command (CMD19 for SD, CMD21 for MMC). 9. Wait for IRQSTAT[BRR], buffer read ready, to be set. 10. Clear IRQSTAT[BRR]. 11. Check SYSCTL2[EXTN] to be cleared. 12. Check SYSCTL2[SAMPCLKSEL], Sampling Clock Select. It's set value indicate tuning procedure success, and clear indicate failure. In case of tuning failure, fixed sampling scheme could be used by clearing TBCTL[TB_EN]. Fixes: b1f378ab5334 ("mmc: sdhci-of-esdhc: add erratum A008171 support") Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-of-esdhc: poll ESDHC_FLUSH_ASYNC_FIFO bit until completionYangbo Lu
The ESDHC_FLUSH_ASYNC_FIFO bit which is set to flush asynchronous FIFO should be polled until it's auto cleared by hardware. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-of-at91: add DT property to enable calibration on full resetNicolas Ferre
Add a property to keep the analog calibration cell powered. This feature is specific to the Microchip SDHCI IP and outside of the standard SDHCI register map. By always keeping it on, after a full reset sequence, we make sure that this feature is activated and not disabled. We expose a hardware property to the DT as this feature can be used to adapt SDHCI behavior vs. how the SDCAL SoC pin is connected on the board. Note that managing properly this property would reduce power consumption on some SAMA5D2 SiP revisions. Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: stm32: make sdmmc_idma_validate_data staticBen Dooks
Make sdmmc_idma_validate_data to avoid the following warning from sparse: drivers/mmc/host/mmci_stm32_sdmmc.c:28:5: warning: symbol 'sdmmc_idma_validate_data' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-pci: Add support for Intel JSLAdrian Hunter
Add PCI Ids for Intel JSL. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: jz4740: Add support for Low Power Mode (LPM)Zhou Yanjie
Add support for low power mode to the Ingenic's MMC/SD Controller. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: jz4740: Add support for X1000Zhou Yanjie
Add support for probing mmc driver on the X1000 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: jz4740: Add support for JZ4760Zhou Yanjie
Add support for probing mmc driver on the JZ4760 Soc from Ingenic. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: jz4740: Add 8bit mode supportZhou Yanjie
Add support for 8bit mode, now supports 1bit/4bit/8bit modes. Signed-off-by: Zhou Yanjie <zhouyanjie@zoho.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-pci: Make function amd_sdhci_reset staticzhengbin
Fix sparse warnings: drivers/mmc/host/sdhci-pci-core.c:1599:6: warning: symbol 'amd_sdhci_reset' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: sdhci-of-arasan: Add Support for Intel LGM SDXCRamuthevar Vadivel Murugan
The current arasan sdhci PHY configuration isn't compatible with the PHY on Intel's LGM(Lightning Mountain) SoC devices. Therefore, add a new compatible, to adapt the Intel's LGM SDXC PHY with arasan-sdhc controller to configure the PHY. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: sdmmc: add busy_complete callbackLudovic Barre
This patch adds a specific busy_complete callback for sdmmc variant. sdmmc has 2 status flags: -busyd0: This is a hardware status flag (inverted value of d0 line). it does not generate an interrupt. -busyd0end: This indicates only end of busy following a CMD response. On busy to Not busy changes, an interrupt is generated (if unmask) and BUSYD0END status flag is set. Status flag is cleared by writing corresponding interrupt clear bit in MMCICLEAR. The legacy busy completion has no dedicated interrupt for the end of busy, so it's must monitor step by step the busy progression. On sdmmc variant, this procedure is not needed, it's just need to wait the busyd0end interrupt. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add busy_complete callbackLudovic Barre
This patch adds busy_completion callback at mmci_host_ops to allow to define a specific busy completion by variant. The legacy code corresponding to busy completion used by ux500 variants is moved to ux500_busy_complete function. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: add hardware busy timeout featureLudovic Barre
In the stm32_sdmmc variant, the datatimer is active not only during data transfers with the DPSM, but also while waiting for the busyend IRQs from commands having the MMC_RSP_BUSY flag set. This leads to an incorrect IRQ being raised to signal MCI_DATATIMEOUT error, which simply breaks the behaviour. Address this by updating the datatimer value before sending a command having the MMC_RSP_BUSY flag set. To inform the mmc core about the maximum supported busy timeout, which also depends on the current clock rate, set ->max_busy_timeout (in ms). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: mmci: make unexported functions staticBen Dooks
Fix the following sparse warnings by making any functions not used outsde the mmci.c driver static. drivers/mmc/host/mmci.c:422:6: warning: symbol 'mmci_dma_release' was not declared. Should it be static? drivers/mmc/host/mmci.c:430:6: warning: symbol 'mmci_dma_setup' was not declared. Should it be static? drivers/mmc/host/mmci.c:465:5: warning: symbol 'mmci_prep_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:481:6: warning: symbol 'mmci_unprep_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:490:6: warning: symbol 'mmci_get_next_data' was not declared. Should it be static? drivers/mmc/host/mmci.c:498:5: warning: symbol 'mmci_dma_start' was not declared. Should it be static? drivers/mmc/host/mmci.c:533:6: warning: symbol 'mmci_dma_finalize' was not declared. Should it be static? drivers/mmc/host/mmci.c:542:6: warning: symbol 'mmci_dma_error' was not declared. Should it be static? drivers/mmc/host/mmci.c:951:6: warning: symbol 'mmci_variant_init' was not declared. Should it be static? drivers/mmc/host/mmci.c:956:6: warning: symbol 'ux500v2_variant_init' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: dw_mmc: fix indentation issueColin Ian King
There are a couple of statements that are indented by an extra space, clean this up by remove the extraneous spaces. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: cavium-octeon: Use devm_platform_ioremap_resource()Markus Elfring
Simplify this function implementation by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: bcm2835: Use devm_platform_ioremap_resource wrapperSaiyam Doshi
Use devm_platform_ioremap_resource helper which wraps platform_get_resource() and devm_ioremap_resource() together. Generated by: scripts/coccinelle/api/devm_platform_ioremap_resource.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Saiyam Doshi <saiyamdoshi.in@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 17:45:24 +0000