summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/mxcmmc.c
AgeCommit message (Collapse)Author
2014-11-10mmc: mxcmmc: fix the default value for available voltages into mxcmci_probeMatteo Facchinetti
If available voltages are not given, mmc_regulator_get_supply() function returns 0 and mxcmmc driver doesn't set a value for ocr_avail mask. In accordance with the comment in platform_data/mmc-mxcmmc.h, fix it, assuming MMC_VDD_32_33 | MMC_VDD_33_34 as default value. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-11-10mmc: mxcmmc: fix race condition when dma finish a data transferMatteo Facchinetti
During a read of data block using dma, driver might have two ways to finish to read and free the resources: 1) checking STATUS_DATA_TRANS_DONE mask, in the mxcmci_irq() routine (pending to mmc irq) 2) mxmmc driver, registers also a mxcmci_dma_callback() and when transfer is finished, dma driver calls this callback. (pending to dma irq) Both ways are concurrent with each other. Race condition happens when following events occur: /* (1) mxcmci driver start data transfer */ 158.418970: mpc_dma_execute: mpc_dma_execute(): will_access_peripheral start cid=31 158.418976: mpc_dma_issue_pending <-mxcmci_request 158.418983: mxcmci_start_cmd <-mxcmci_request /* (2) mxcmci driver receive mmc irq */ 158.419656: mxcmci_irq <-handle_irq_event_percpu 158.419692: mxcmci_read_response <-mxcmci_irq /* (3) mxcmci driver checks that transfer is complete and call mxcmci_finish_data() */ 158.419726: mxcmci_data_done <-mxcmci_irq 158.419729: mxcmci_finish_data <-mxcmci_data_done 158.419733: dma_direct_unmap_sg <-mxcmci_finish_data 158.419736: mxcmci_swap_buffers.isra.24 <-mxcmci_finish_data 158.419762: mxcmci_read_response <-mxcmci_data_done /* (4) mxcmci driver (no dma): send stop command */ 158.419765: mxcmci_start_cmd <-mxcmci_data_done /* (5) mxcmci driver (no dma): receive the stop command irq response */ 158.419782: mxcmci_irq <-handle_irq_event_percpu 158.419812: mxcmci_read_response <-mxcmci_irq 158.419843: mxcmci_finish_request <-mxcmci_irq /* (6) dma driver: receive dma irq (finish data transfer) related by request on step 1 */ 158.419853: mpc_dma_irq <-handle_irq_event_percpu 158.420001: mpc_dma_irq_process <-mpc_dma_irq 158.420004: mpc_dma_irq_process <-mpc_dma_irq /* (7) dma driver: start dma tasklet to finish the dma irq handling */ 158.420008: mpc_dma_irq_process: mpc_dma_irq_process(): completed ch:31 /* (8) mxcmci driver: start next data transfer using dma */ 158.420174: mxcmci_request <-mmc_start_req 158.420182: dma_direct_map_sg <-mxcmci_request 158.420192: mpc_dma_prep_slave_sg <-mxcmci_request /* (9) dma driver: schedule irq tasklet and execute mxcmci dma driver callback */ 158.420250: mpc_dma_tasklet <-tasklet_action 158.420254: mpc_dma_process_completed <-tasklet_action 158.420267: mxcmci_dma_callback <-mpc_dma_process_completed /* ERROR!!! (10) mxcmci driver callback works on dma data related to the step 1 that is already finished */ 158.420271: mxcmci_data_done <-mpc_dma_process_completed 158.420273: mxcmci_finish_data <-mxcmci_data_done /* ERROR!!! (11) mxcmci driver: clear data that should be used by step 8 and send an other mmc stop command (already sended on step 4) */ 158.420276: dma_direct_unmap_sg <-mxcmci_finish_data 158.420279: mxcmci_swap_buffers.isra.24 <-mxcmci_finish_data 158.420330: mxcmci_read_response <-mxcmci_data_done 158.420333: mxcmci_start_cmd <-mxcmci_data_done 158.420338: dma_run_dependencies <-mpc_dma_process_completed ... ... ... 168.474223: mxcmci_watchdog <-call_timer_fn 168.474236: mxcmci_watchdog: mxcmci_watchdog 168.474397: mpc_dma_device_control <-mxcmci_watchdog In accordance with the other drivers that using the dma engine, fix it, leaving *only* to dma driver the complete control to ending the read operation. Removing STATUS_READ_OP_DONE event activation, has as effect to force mxcmci driver to handle the finish data transfer only by mxcmci dma callback. Signed-off-by: Matteo Facchinetti <matteo.facchinetti@sirius-es.it> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: remove .owner field for drivers using module_platform_driverPeter Griffin
This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-05-12mmc: mxcmmc: Use mmc_regulator_get_supply() APIAlexander Shiyan
This patch replaces regulator manipulation with mmc_regulator_get_supply() function from MMC core. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mxcmmc: Convert to SIMPLE_DEV_PM_OPSAlexander Shiyan
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2014-05-12mmc: mxcmmc: Convert to devm-* APIAlexander Shiyan
Replace existing resource handling in the driver with managed device resource, this ensures more consistent error values and simplifies error paths. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
2013-10-30mmc: mxcmmc: Move away from using deprecated APIsUlf Hansson
Suspend and resume of cards are being handled from the protocol layer and consequently the mmc_suspend|resume_host APIs are deprecated. This means we can simplify the suspend|resume callbacks by removing the use of the deprecated APIs. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: mxcmmc: handle mmc_of_parse() errors during probeSimon Baatz
Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-05-26mmc: remove unnecessary platform_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: enable DMA support on mpc512xAnatolij Gustschin
Add SDHC DMA channel description to the mpc512x device tree to enable slave channel requesting in the mxcmmc driver. mpc512x DMA engine doesn't support endianness conversion when reading/writing data from peripheral's FIFO, so we have to swap data buffers before each DMA write and after each DMA read transfer manually. Since chained SDHC DMA transfers are not supported on mpc512x, limit 'max_segs' tunable parameter to one and initialise it to 64 only when running on i.MX platforms. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: constify mxcmci_devtypeAnatolij Gustschin
mxcmci_devtype struct contains constant data, so constify this struct. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: use slot-gpio API for write-protect detectionAnatolij Gustschin
slot-gpio API suppors read-only detection when "wp-gpios" property is present in the device tree mmc node. Use this API for write-protect detection. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: add mpc512x SDHC supportAnatolij Gustschin
The SDHC controller on mpc512x is compatible with i.MX31 SDHC, so the mxcmmc driver can be used on mpc512x, too. Extend the driver to support mpc512x as well. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: fix race conditions for host->req and host->data accessAnatolij Gustschin
mxcmci_dma_callback() is invoked by DMA drivers in soft-irq context and can be interrupted by the mxcmci_irq() interrupt which can finish the mmc request or data transfer and set host->req or host->data pointers to NULL. Then mxcmci_data_done() crashes with a null pointer dereferences. Protect all accesses to host->req and host->data by spin locks. Also check host->data pointer in mxcmci_watchdog() before dereferencing it. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: DT supportMarkus Pargmann
Adding devicetree support for imx21-mmc and imx31-mmc. Based on generic gpio helper functions by Guennadi and generic DMA devicetree bindings. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-04-12mmc: mxcmmc: Fix bug when card is present during bootAlexander Shiyan
This patch fixes bug when card is present during boot. Bug was introduced due commit "mmc: mxcmmc: fix bug that may block a data transfer forever". When a card is present "mxcmci_setup_data" function is executed, but the timer is not initialized. ... i.MX SDHC driver mmc0: SD Status: Invalid Allocation Unit size. mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 1.91 GiB ------------[ cut here ]------------ kernel BUG at kernel/timer.c:729! Internal error: Oops - BUG: 0 [#1] PREEMPT ARM CPU: 0 Not tainted (3.9.0-rc5-next-20130404 #2) PC is at mod_timer+0x168/0x198 LR is at mxcmci_request+0x21c/0x328 ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-12-12Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM SoC cleanups on various subarchitectures from Olof Johansson: "Cleanup patches for various ARM platforms and some of their associated drivers. There's also a branch in here that enables Freescale i.MX to be part of the multiplatform support -- the first "big" SoC that is moved over (more multiplatform work comes in a separate branch later during the merge window)." Conflicts fixed as per Olof, including a silent semantic one in arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to omap3xxx_restart(), and a new user of the old name was added). * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits) ARM: omap: fix typo on timer cleanup ARM: EXYNOS: Remove unused regs-mem.h file ARM: EXYNOS: Remove unused non-dt support for dwmci controller ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan ARM: OMAP3: cm-t3517: use GPTIMER for system clock ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER ARM: SAMSUNG: use devm_ functions for ADC driver ARM: EXYNOS: no duplicate mask/unmask in eint0_15 ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443 ARM: EXYNOS: Remove i2c0 resource information and setting of device names ARM: Kirkwood: checkpatch cleanups ARM: Kirkwood: Fix sparse warnings. ARM: Kirkwood: Remove unused includes ARM: kirkwood: cleanup lsxl board includes ARM: integrator: use BUG_ON where possible ARM: integrator: push down SC dependencies ARM: integrator: delete static UART1 mapping ARM: integrator: delete SC mapping on the CP ARM: integrator: remove static CP syscon mapping ARM: integrator: remove static AP syscon mapping ...
2012-12-06mmc: mxcmmc: fix SD cards not being detected sometimes.Javier Martin
When a SD card is initialized some data transfers of 64 and 8 bytes are issued. It seems the DMA has some problems dealing with these kind of "short" transfers, leading sometimes to the SD card not being detected. In order to solve this problem, do not use DMA for transfer sizes lower than the sector size. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-13Merge branch 'cleanups/dma' into next/cleanupArnd Bergmann
Separate patches from Marek Szyprowski <m.szyprowski@samsung.com>: Commit e9da6e9905e639b0 ("ARM: dma-mapping: remove custom consistent dma region") replaced custom consistent memory handling, so setting consistent dma memory size is not longer required. This patch series cleans sub-architecture platform code to remove all calls to the obsolated init_consistent_dma_size() function and finally removes the init_consistent_dma_size() stub itself. * cleanups/dma: ARM: at91: remove obsoleted init_consistent_dma_size() ARM: u300: remove obsoleted init_consistent_dma_size() ARM: dma-mapping: remove init_consistent_dma_size() stub ARM: shmobile: remove obsoleted init_consistent_dma_size() ARM: davinci: remove obsoleted init_consistent_dma_size() ARM: samsung: remove obsoleted init_consistent_dma_size() Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-11-07mmc: mxcmmc: Fix MODULE_ALIASFabio Estevam
The correct name for the driver is "mxc-mmc". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-15mmc: mxcmmc: remove cpu_is_xxx by using platform_device_idShawn Guo
It changes the driver to use platform_device_id rather than cpu_is_xxx to determine the controller type, and updates the platform code accordingly. As the result, mach/hardware.h inclusion gets removed from the driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Cc: linux-mmc@vger.kernel.org
2012-10-10Merge tag 'mmc-merge-for-3.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...
2012-10-03mmc: mxcmmc: fix bug that may block a data transfer foreverJavier Martin
The problem can be easily reproduced using a script that loops copying a file in an SD card to another place in the same SD card and its related to read transfers. This only happens with DMA enabled. This is related to the fact that, when reading, an MMC irq signals the fact that all data from the SD card has been copied to the internal buffers. However, it doesn't signal whether the DMA transfer that is in charge of moving data from these internal buffers to RAM has finished or not. Thus, calling dmaengine_terminate_all() in the MMC irq routine can cancel an ongoing DMA transfer leaving some data in the internal buffers that produces an accumulative effect which, in the end, blocks a read data transfer forever. The following patch watches DMA irq for reading and MMC irqs for writing transfers. The 'dangerous' usage of dmaengine_terminate_all() is removed and a timeout of 10 seconds is added so that the MMC won't block forever anymore. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-14ARM: imx: move platform_data definitionsArnd Bergmann
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the imx include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Sascha Hauer <kernel@pengutronix.de> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Dan Williams <djbw@fb.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2012-04-25mmc mxcmmc: do not depend on grouped clocksSascha Hauer
the current i.MX clock support groups together unrelated clocks to a single clock which is then used by the driver. This can't be accomplished with the generic clock framework so we instead request the individual clocks in the driver. For i.MX there are generally three different clocks: ipg: bus clock (needed to access registers) ahb: dma relevant clock, sometimes referred to as hclk in the datasheet per: bit clock, pixel clock This patch changes the driver to request the individual clocks. Currently all clk_get will get the same clock until the SoCs are converted to the generic clock framework Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-03-21dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22dmaengine: Pass dma_slave_config .device_fc = NULL for all existing usersViresh Kumar
.device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-30mmc: mxcmmc: add missing dma_async_issue_pendingSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-11mmc: convert drivers/mmc/host/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/mmc/host/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-10mmc: mxcmmc: fix falling back to PIOSascha Hauer
When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-17Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul
resolved conflicts: drivers/media/video/mx3_camera.c
2011-11-01Merge branch 'next/cleanup' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/cleanup' of git://git.linaro.org/people/arnd/arm-soc: (125 commits) ARM: mach-mxs: fix machines' initializers order mmc: mxcmmc: explicitly includes mach/hardware.h arm/imx: explicitly includes mach/hardware.h in pm-imx27.c arm/imx: remove mx27_setup_weimcs() from mx27.h arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c arm/imx: remove mx31_setup_weimcs() from mx31.h ARM: tegra: devices.c should include devices.h ARM: tegra: cpu-tegra: unexport two functions ARM: tegra: cpu-tegra: sparse type fix ARM: tegra: dma: staticify some tables and functions ARM: tegra: tegra2_clocks: don't export some tables ARM: tegra: tegra_powergate_is_powered should be static ARM: tegra: tegra_rtc_read_ms should be static ARM: tegra: tegra_init_cache should be static ARM: tegra: pcie: 0 -> NULL changes ARM: tegra: pcie: include board.h ARM: tegra: pcie: don't cast __iomem pointers ARM: tegra: tegra2_clocks: 0 -> NULL changes ARM: tegra: tegra2_clocks: don't cast __iomem pointers ARM: tegra: timer: don't cast __iomem pointers ... Fix up trivial conflicts in arch/arm/mach-omap2/Makefile, arch/arm/mach-u300/{Makefile.boot,core.c} arch/arm/plat-{mxc,omap}/devices.c
2011-10-31mmc-host: move to dma_transfer_directionVinod Koul
fixup usage of dma direction by introducing dma_transfer_direction, this patch moves mmc drivers to use new enum Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Chris Ball <cjb@laptop.org> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-26mmc: replace printk with appropriate display macroGirish K S
All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-17mmc: mxcmmc: explicitly includes mach/hardware.hShawn Guo
When indirect inclusion to <mach/hardware.h> via <mach/gpio.h> gets removed, we will see the following compile error. CC drivers/mmc/host/mxcmmc.o drivers/mmc/host/mxcmmc.c: In function ‘mxcmci_init_card’: drivers/mmc/host/mxcmmc.c:811:2: error: implicit declaration of function ‘cpu_is_mx3’ Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-07-07ARM i.MX dma: Fix burstsize settingsSascha Hauer
dmaengine expects the maxburst parameter in words, not bytes. The imxdma driver and its users do this wrong. Fix this. As a side note the imx-pcm-dma-mx2 driver was 'fixed' to work with imx-dma. This broke the driver with imx-sdma support which correctly takes the maxburst parameter in words. This patch puts the sdma based sound back to work. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-15mmc: mxcmmc: use dmaengine APISascha Hauer
This switches the mxcmmc driver to use the dmaengine API. Unlike the old one this one is always present in the tree, even if no DMA is implemented, hence we can remove all the #ifdefs in from the driver. The driver automatically switches to PIO mode if no DMA support or no suitable channel is available. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: mxcmmc: remove a unnecessary release_resource() callAxel Lin
Remove release_resource() after release_mem_region(). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: mxcmmc: update the regulator support code to the latest APIAlberto Panizzo
This also fixes the build problem introduced by my previous patch due to unhandled API changes introduced by commit: 99fc513101 (mmc: Move regulator handling closer to core) Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: mxcmmc: Allow binding a regulator to manage the MMC card voltageAlberto Panizzo
This implementation is based on the pxamci.c driver and it will be used to support the mx31_3ds machine. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Remove distinction between hw and phys segmentsMartin K. Petersen
We have deprecated the distinction between hardware and physical segments in the block layer. Consolidate the two limits into one in drivers/mmc/. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-07-26mxcmmc: convert to pm_ops and enable/disable clockEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: s.hauer@pengutronix.de Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-07-26Merge branch 'imx/for-2.6.36' of git://git.pengutronix.de/git/ukl/linux-2.6 ↵Uwe Kleine-König
into HEAD There are some more conflicts than detected by git, namely support for the newly added cpuimx machines needed to be converted to dynamic device registration. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Conflicts: arch/arm/mach-imx/Makefile arch/arm/mach-imx/devices.c arch/arm/mach-imx/devices.h arch/arm/mach-imx/eukrea_mbimx27-baseboard.c arch/arm/mach-mx2/Kconfig arch/arm/mach-mx25/Makefile arch/arm/mach-mx25/devices.c arch/arm/plat-mxc/include/mach/mx25.h arch/arm/plat-mxc/include/mach/mxc_nand.h
2010-07-26mxcmmc: add card detect through DAT3 possibilityEric Bénard
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-05-27mmc: remove the "state" argument to mmc_suspend_host()Matt Fleming
Even though many mmc host drivers pass a pm_message_t argument to mmc_suspend_host() that argument isn't used the by MMC core. As host drivers are converted to dev_pm_ops they'll have to construct pm_message_t's (as they won't be passed by the PM subsystem any more) just to appease the mmc suspend interface. We might as well just delete the unused paramter. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>ZZ Acked-by: Sascha Sommer <saschasommer@freenet.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-17ARM: mx3: Fix a race condition in mxcmmcDaniel Mack
From cefcdab08d1c9636c4a7290bc2bbe937d051bce4 Mon Sep 17 00:00:00 2001 From: Volker Ernst <volker.ernst@txtr.com> Date: Mon, 26 Apr 2010 22:51:07 +0200 Subject: [PATCH] ARM: mx3: Fix a race condition in mxcmmc This fixes a race condition regarding interrupt bits in the SDHC controller driver code. In case of PIO-transfer it does not clear SDHC-status bit#11/12 in the INT-handler anymore. INT-handler might be called during an ongoing PIO-data-transfer (with some other INT-flag set) and PIO-transfer depends on these bits being set to detect the end of the data-transfer. This also means that at the end of PIO- transfer that PIO-software has to clear these bits itself. However in case of DMA-transfer these bits have to be cleared in the INT-handler, because they are used to generate INTs then. Works solid, no more problems here, can transfer big files. Signed-off-by: Volker Ernst <volker.ernst@txtr.com> Acked-by: Daniel Mack <daniel@caiaq.de> Cc: Andy Green <andy@warmcat.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-14ARM: MXC: mxcmmc: work around a bug in the SDHC busy line handlingDaniel Mack
MX3 SoCs have a silicon bug which corrupts CRC calculation of multi-block transfers when connected SDIO peripheral doesn't drive the BUSY line as required by the specs. One way to prevent this is to only allow 1-bit transfers. Another way is playing tricks with the DMA engine, but this isn't mainline yet. So for now, we live with the performance drawback of 1-bit transfers until a nicer solution is found. This patch introduces a new host controller callback 'init_card' which is for now only called from mmc_sdio_init_card(). Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-14ARM: MXC: mxcmmc: Teach the driver SDIO operationsDaniel Mack
Successfully tested on MX31 hardware using libertas SDIO peripherals. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-04-14ARM: MXC: mxcmmc: misc cleanupsDaniel Mack
Be more verbose on error messages and add one debug message. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Volker Ernst <volker.ernst@txtr.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Michał Mirosław <mirqus@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 23:18:41 +0000