summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2007-12-13ACPI: thinkpad-acpi: fix lenovo keymap for brightnessHenrique de Moraes Holschuh
Starting in 2.6.23... Several reports from X60 users complained that the default Lenovo keymap issuing EV_KEY KEY_BRIGHTNESS_UP/DOWN input events caused major issues when the proper brightness support through ACPI video.c was loaded. Therefore, remove the generation of these events by default, which is the right thing for T60, X60, R60, T61, X61 and R61 with their latest BIOSes. Distros that want to misuse these events into OSD reporting (which requires an ugly hack from hell in HAL) are welcome to set up the key map they need through HAL. That way, we don't break everyone else's systems. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: adds the context menu key (HUT GenDesc 0x84) Input: add definitions for frame forward and frame back keys Input: bf54x-keys - keypad does not exist on BF544 parts Input: gpio-keys - request and configure GPIOs Input: i8042 - add i8042.noloop quirk for MS Virtual Machine Sonypi: use synchronize_irq instead of sycnronize_sched sonypi: fit input devices into sysfs tree sony-laptop: fit input devices into sysfs tree
2007-11-21sony-laptop: fit input devices into sysfs treeDmitry Torokhov
Properly set up parent on input devices registered by sony-laptop. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Mattia Dongili <malattia@linux.it>
2007-11-20Pull thinkpad-2.6.24 into release branchLen Brown
2007-11-19ACPI: thinkpad-acpi: fix oops when a module parameter has no valueHenrique de Moraes Holschuh
set_ibm_param() could OOPS with a NULL pointer derreference if one did not give any values for a module parameter it handles. This would, of course, cause all sort of trouble for future modprobing and require a reboot to clean up properly. Fix it by returning -EINVAL if no values are given for the parameter, and also avoid any nastyness from BUG_ON while at it. How to reproduce: modprobe thinkpad-acpi brightness Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Tested-by: Mike Kershaw <dragorn@kismetwireless.net> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-14drivers/misc: Move misplaced pci_dev_put'sJulia Lawall
Move pci_dev_put outside the loops in which it occurs. Within the loop, pci_dev_put is done implicitly by pci_get_device. The problem was detected using the following semantic patch, and corrected by hand. @@ expression dev; expression E; @@ - pci_dev_put(dev) ... when != dev = E - pci_get_device(...,dev) Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-05ACPI: thinkpad-acpi: fix brightness_set error pathsHenrique de Moraes Holschuh
The code calling brightness_set() can't handle EINTR/ERESTARTSYS well, nor is it checking brightness_set() return status properly. Fix it. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05ACPI: thinkpad-acpi: allow for syscall restart in sysfs handlersHenrique de Moraes Holschuh
Map an mutex_lock_interruptible() error return into ERESTARTSYS, as the only possible error from mutex_lock_interruptible is EINTR, and that will only happen if signal_pending() causes the mutex lock attempt to abort. This still allows signals to be delivered ASAP, which is much nicer than just doing mutex_lock, and still shadows userspace from EINTR when SA_RESTART is active. Problem reported by Peter Jordan. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Jean Delvare <khali@linux-fr.org> Cc: Peter Jordan <usernetwork@gmx.info> Cc: Richard Neill <rn214@hermes.cam.ac.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05ACPI: thinkpad-acpi: bump up version to 0.17Henrique de Moraes Holschuh
The lm-sensors 3.0.0/libsensors4 compatibility changes are reason enough to bump up the version string. Do it. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05ACPI: thinkpad-acpi: prefer standard ACPI backlight level controlHenrique de Moraes Holschuh
Newer Lenovo BIOSes support the standard ACPI backlight brightness interface (_BCM, _BQC, _BCL). It should be used instead of the native thinkpad backlight brightness control interface when possible. This patch disables the native brightness support in the driver by default when we detect that the standard ACPI interface is available. The local admin can still enable it using the module parameter "brightness_enable". Note that we need to detect the standard ACPI backlight interface only in boxes for which we would load the native backlight interface in the first place, and that no ThinkPad BIOS has _BCL but misses the other methods, so the detection routines can be really simple. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05ACPI: thinkpad-acpi: add brightness_force parameterHenrique de Moraes Holschuh
Add a "brightness_enable" module parameter that allows the local admin to force the backlight support to not be enabled. It can also be used to force the backlight support to be enabled, but that is currently a no-op as the backlight support is enabled by default when available. This will be changed by a different patch. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05ACPI: thinkpad-acpi: support 16 levels of brightness (v3)Henrique de Moraes Holschuh
Lenovo ThinkPads often have 16 brightness levels in EC, and not just eight levels like older ThinkPads. They also have standard ACPI backlight brightness control. We detect the number of brightness levels by the presence of a BCLL package with 16 entries. If BCLL is not there, we assume eight levels (Z6*). If it is there, but it doesn't have 16 entries, we assume eight levels (T60). Otherwise we assume sixteen levels (T61, X61, etc). We don't use _BCL because it can have side-effects in thinkpads. Thanks to Thomas Renninger <trenn@suse.de> for notifying me of this potential problem. Using the standard ACPI backlight brightness control *instead* of the native thinkpad backlight control is a better idea, though. A different patch will take care of this. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-05ACPI: thinkpad-acpi: revert keymap changesHenrique de Moraes Holschuh
Revert commit fba956c46a72f9e7503fd464ffee43c632307e31, "Map volume and brightness events on thinkpads". That commit made some modifications to the default keymaps that cause bad behaviour on all IBM ThinkPads if HAL doesn't know to change them into passive (on-screen-display only) events. The proper solution for IBM ThinkPads is to use the _NOTIFY version of the key codes for the IBM default map (which are not available in mainline yet), and for the Lenovo keymap, it will take some studying of the various DSDTs and testing to know the best path (which I will do shortly). For more data, refer to: http://thread.gmane.org/gmane.linux.kernel/591037/focus=591045 Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Jeremy Katz <katzj@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25fujitsu-laptop.c: remove dead codeAdrian Bunk
This patch removes dead code spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-25fujitsu-laptop: make 2 functions staticAdrian Bunk
acpi_fujitsu_{add,remove}() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-20typo fixesMatt LaPlante
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19more UTF-8 conversionsMarcin Garski
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (41 commits) ACPICA: hw: Don't carry spinlock over suspend ACPICA: hw: remove use_lock flag from acpi_hw_register_{read, write} ACPI: cpuidle: port idle timer suspend/resume workaround to cpuidle ACPI: clean up acpi_enter_sleep_state_prep Hibernation: Make sure that ACPI is enabled in acpi_hibernation_finish ACPI: suppress uninitialized var warning cpuidle: consolidate 2.6.22 cpuidle branch into one patch ACPI: thinkpad-acpi: skip blanks before the data when parsing sysfs ACPI: AC: Add sysfs interface ACPI: SBS: Add sysfs alarm ACPI: SBS: Add ACPI_PROCFS around procfs handling code. ACPI: SBS: Add support for power_supply class (and sysfs) ACPI: SBS: Make SBS reads table-driven. ACPI: SBS: Simplify data structures in SBS ACPI: SBS: Split host controller (ACPI0001) from SBS driver (ACPI0002) ACPI: EC: Add new query handler to list head. ACPI: Add acpi_bus_generate_event4() function ACPI: Battery: add sysfs alarm ACPI: Battery: Add sysfs support ACPI: Battery: Misc clean-ups, no functional changes ... Fix up conflicts in drivers/misc/thinkpad_acpi.[ch] manually
2007-10-19get rid of input BIT* duplicate definesJiri Slaby
get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: <dtor@mail.ru> Acked-by: Jiri Kosina <jkosina@suse.cz> Cc: <lenb@kernel.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: <perex@suse.cz> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <vernux@us.ibm.com> Cc: <malattia@linux.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Misc: phantom, improved data passingJiri Slaby
This new version guarantees amb_bit switch in small enough intervals, so that the device won't stop working in the middle of a movement anymore. However it preserves old (openhaptics) functionality. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Misc: phantom, add comment about openhapticsJiri Slaby
Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Misc: phantom, synchronize_irq() on suspendJiri Slaby
Wait after disabling device's interrupt until the handler finishes its work if still in progress. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17Driver for the Atmel on-chip SSC on AT32AP and AT91Hans-Christian Egtvedt
The Synchronous Serial Controller (SSC) on Atmel microprocessors are capable of tranceiving many frame based protocols, like I2S. Tested on the AT32AP7000/ATSTK1000. This driver is used in the ALSA sound driver for the AT73C213 external DAC on the ATSTK1000 development board for AVR32. This sound driver will be submitted soon. Hardware documentation can be found in the AT32AP7000 data sheet, which can be downloaded from http://www.atmel.com/dyn/products/datasheets.asp?family_id=682 [akpm@linux-foundation.org: init spinlock at compile time] Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: David Brownell <david-b@pacbell.net> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15Map volume and brightness events on thinkpadsJeremy Katz
There are standard keycodes for brightness and volume; map the events to emit them so that things work properly Signed-off-by: Jeremy Katz <katzj@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits) hwmon: (vt8231) fix sparse warning hwmon: (sis5595) fix sparse warning hwmon: (w83627hf) don't assume bank 0 hwmon: (w83627hf) Fix setting fan min right after driver load hwmon: (w83627hf) De-macro sysfs callback functions hwmon: Add new combined driver for FSC chips hwmon: (ibmpex) Release IPMI user if hwmon registration fails hwmon: (dme1737) Add sch311x support hwmon: (dme1737) group functions logically hwmon: (dme1737) cleanups hwmon: IBM power meter driver hwmon: (coretemp) Add support for Celeron 4xx hwmon: (lm87) Disable VID when it should be hwmon: (w83781d) Add individual alarm and beep files hwmon: VRM is not read from registers MAINTAINERS: update hwmon subsystem git trees hwmon: Fix the code examples in documentation hwmon: update sysfs interface document - error handling hwmon: (thmc50) Fix a debug message hwmon: (thmc50) Don't create temp3 if not enabled ...
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-11Merge branch 'master' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-10Pull fujitsu-v3 into release branchLen Brown
2007-10-10Pull thinkpad into release branchLen Brown
2007-10-10Pull sony-2.6.24 into release branchLen Brown
2007-10-09ACPI: thinkpad-acpi: skip blanks before the data when parsing sysfsHenrique de Moraes Holschuh
Skip blanks not just at the tail of sysfs writes, but also at the head. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-10-09hwmon: Convert from class_device to deviceTony Jones
Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2007-10-09drivers/firmware: const-ify DMI API and internalsJeff Garzik
Three main sets of changes: 1) dmi_get_system_info() return value should have been marked const, since callers should not be changing that data. 2) const-ify DMI internals, since DMI firmware tables should, whenever possible, be marked const to ensure we never ever write to that data area. 3) const-ify DMI API, to enable marking tables const where possible in low-level drivers. And if we're really lucky, this might enable some additional optimizations on the part of the compiler. The bulk of the changes are #2 and #3, which are interrelated. #1 could have been a separate patch, but it was so small compared to the others, it was easier to roll it into this changeset. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-03[POWERPC] Sky Cpu and Nexus: use seq_file/single_open on proc interfaceCyrill Gorcunov
This patch changes proc interface to be used with single_file/seq_open calls. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu: use C99 style for struct initCyrill Gorcunov
This changes structure item init format to C99, and removes useless structure items init. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: check for create_proc_entry ret codeCyrill Gorcunov
Adds checking of create_proc_entry call to prevent possible NULL pointer usage. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: check for platform_get_resource retcodeCyrill Gorcunov
Add adds checking for platform_get_resource() return code to prevent possible NULL pointer usage. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: include io.hCyrill Gorcunov
Add #include <asm/io.h> directive to properly declare ioremap() and writel(). Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-03[POWERPC] Sky Cpu and Nexus: code style improvementCyrill Gorcunov
Remove useless spaces and adds some empty lines to make code more readable. Also marker for printk is added. Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Brian Waite <waite@skycomputers.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-25ACPI: thinkpad-acpi: duplicate driver attributes to new hwmon pdrvHenrique de Moraes Holschuh
Thinkpad-acpi has some driver attributes (debug level, sysfs interface version, etc) that also belong to the new hwmon driver. Duplicate them there. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-25ACPI: thinkpad-acpi: use a separate platform device for hwmon and name it (v2)Henrique de Moraes Holschuh
Use a separate platform device and driver ("thinkpad_hwmon") to attach hwmon attributes and class, and add a name attribute of "thinkpad" to it, which defines the hwmon device name for libsensors4. This makes thinkpad-acpi compatible with libsensors4 from lm-sensors, and the platform driver and device split will make it much easier to separate hwmon functionality into its own module later on. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: fix regression on HKEY LID event handlingHenrique de Moraes Holschuh
We were letting ThinkPad-specific LID events through to userspace again, instead of dropping them. Fix it. We don't want to give userspace the option of not using generic LID handling. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: dequeue all pending hot key events at once (v2.2)Henrique de Moraes Holschuh
Receive all pending HKEY events at once from a single notification, and don't complain if the queue is empty. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: check version of hot key firmwareHenrique de Moraes Holschuh
Check the HKEY firmware version (HKEY.MHKV handler), and refuse to load if it is unknown. Use this instead of the presence of HKEY.DHKV to detect hot key mask capability. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: keep track of module stateHenrique de Moraes Holschuh
Keep track of module state (init, running, exit). This makes it trivially easy to avoid running any interrupt handlers, threads, or any other async activity before we are ready, or when we want to go away. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: add mutex-based locking to input device event send pathHenrique de Moraes Holschuh
Protect the input device event sending path with a mutex, since hot key input events are not atomic and require an cohesive event block to be sent together. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: issue EV_SYNC after EV_SWITCHHenrique de Moraes Holschuh
We were missing a input_sync on the radio switch event report path. Add it. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2007-09-23ACPI: thinkpad-acpi: make room for more features in tp_features bitfieldHenrique de Moraes Holschuh
Increase tp_features to 32 bits. It is too close to running out of room. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>