| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- new driver for ICY, an Amiga Zorro card :)
- axxia driver gained slave mode support, NXP driver gained ACPI
- the slave EEPROM backend gained 16 bit address support
- and lots of regular driver updates and reworks
* 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits)
i2c: tegra: Move suspend handling to NOIRQ phase
i2c: imx: ACPI support for NXP i2c controller
i2c: uniphier(-f): remove all dev_dbg()
i2c: uniphier(-f): use devm_platform_ioremap_resource()
i2c: slave-eeprom: Add comment about address handling
i2c: exynos5: Remove IRQF_ONESHOT
i2c: stm32f7: Make structure stm32f7_i2c_algo constant
i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe
i2c-eeprom_slave: Add support for more eeprom models
i2c: fsi: Add of_put_node() before break
i2c: synquacer: Make synquacer_i2c_ops constant
i2c: hix5hd2: Remove IRQF_ONESHOT
i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond
watchdog: iTCO: Add support for Cannon Lake PCH iTCO
i2c: iproc: Make bcm_iproc_i2c_quirks constant
i2c: iproc: Add full name of devicetree node to adapter name
i2c: piix4: Add ACPI support
i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h
i2c: ocores: use request_any_context_irq() to register IRQ handler
i2c: designware: Fix optional reset error handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"This is more cleanup and consolidation of the hmm APIs and the very
strongly related mmu_notifier interfaces. Many places across the tree
using these interfaces are touched in the process. Beyond that a
cleanup to the page walker API and a few memremap related changes
round out the series:
- General improvement of hmm_range_fault() and related APIs, more
documentation, bug fixes from testing, API simplification &
consolidation, and unused API removal
- Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
and make them internal kconfig selects
- Hoist a lot of code related to mmu notifier attachment out of
drivers by using a refcount get/put attachment idiom and remove the
convoluted mmu_notifier_unregister_no_release() and related APIs.
- General API improvement for the migrate_vma API and revision of its
only user in nouveau
- Annotate mmu_notifiers with lockdep and sleeping region debugging
Two series unrelated to HMM or mmu_notifiers came along due to
dependencies:
- Allow pagemap's memremap_pages family of APIs to work without
providing a struct device
- Make walk_page_range() and related use a constant structure for
function pointers"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
libnvdimm: Enable unit test infrastructure compile checks
mm, notifier: Catch sleeping/blocking for !blockable
kernel.h: Add non_block_start/end()
drm/radeon: guard against calling an unpaired radeon_mn_unregister()
csky: add missing brackets in a macro for tlb.h
pagewalk: use lockdep_assert_held for locking validation
pagewalk: separate function pointers from iterator data
mm: split out a new pagewalk.h header from mm.h
mm/mmu_notifiers: annotate with might_sleep()
mm/mmu_notifiers: prime lockdep
mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
mm/hmm: hmm_range_fault() infinite loop
mm/hmm: hmm_range_fault() NULL pointer bug
mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
mm/mmu_notifiers: remove unregister_no_release
RDMA/odp: remove ib_ucontext from ib_umem
RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
RDMA/mlx5: Use ib_umem_start instead of umem.address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big char/misc driver pull request for 5.4-rc1.
As has been happening in previous releases, more and more individual
driver subsystem trees are ending up in here. Now if that is good or
bad I can't tell, but hopefully it makes your life easier as it's more
of an aggregation of trees together to one merge point for you.
Anyway, lots of stuff in here:
- habanalabs driver updates
- thunderbolt driver updates
- misc driver updates
- coresight and intel_th hwtracing driver updates
- fpga driver updates
- extcon driver updates
- some dma driver updates
- char driver updates
- android binder driver updates
- nvmem driver updates
- phy driver updates
- parport driver fixes
- pcmcia driver fix
- uio driver updates
- w1 driver updates
- configfs fixes
- other assorted driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
habanalabs: correctly cast variable to __le32
habanalabs: show correct id in error print
habanalabs: stop using the acronym KMD
habanalabs: display card name as sensors header
habanalabs: add uapi to retrieve aggregate H/W events
habanalabs: add uapi to retrieve device utilization
habanalabs: Make the Coresight timestamp perpetual
habanalabs: explicitly set the queue-id enumerated numbers
habanalabs: print to kernel log when reset is finished
habanalabs: replace __le32_to_cpu with le32_to_cpu
habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
habanalabs: Handle HW_IP_INFO if device disabled or in reset
habanalabs: Expose devices after initialization is done
habanalabs: improve security in Debug IOCTL
habanalabs: use default structure for user input in Debug IOCTL
habanalabs: Add descriptive name to PSOC app status register
habanalabs: Add descriptive names to PSOC scratch-pad registers
habanalabs: create two char devices per ASIC
habanalabs: change device_setup_cdev() to be more generic
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"In this cycle we've finally managed to contribute the patch set
sorting out LED naming issues. Besides that there are many changes
scattered among various LED class drivers and triggers.
LED naming related improvements:
- add new 'function' and 'color' fwnode properties and deprecate
'label' property which has been frequently abused for conveying
vendor specific names that have been available in sysfs anyway
- introduce a set of standard LED_FUNCTION* definitions
- introduce a set of standard LED_COLOR_ID* definitions
- add a new {devm_}led_classdev_register_ext() API with the
capability of automatic LED name composition basing on the
properties available in the passed fwnode; the function is
backwards compatible in a sense that it uses 'label' data, if
present in the fwnode, for creating LED name
- add tools/leds/get_led_device_info.sh script for retrieving LED
vendor, product and bus names, if applicable; it also performs
basic validation of an LED name
- update following drivers and their DT bindings to use the new LED
registration API:
- leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114,
leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt
Other LED class improvements:
- replace {devm_}led_classdev_register() macros with inlines
- allow to call led_classdev_unregister() unconditionally
- switch to use fwnode instead of be stuck with OF one
LED triggers improvements:
- led-triggers:
- fix dereferencing of null pointer
- fix a memory leak bug
- ledtrig-gpio:
- GPIO 0 is valid
Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer,
more complete driver exists, based on a generic driver for the AMD
SOCs gpio-controller, supporting LEDs as well other devices:
- drop profile field from priv data
- drop iosize field from priv data
- drop enum_apu_led_platform_types
- drop superseeded apu2/3 led support
- add pr_fmt prefix for better log output
- fix error message on probing failure
Other misc fixes and improvements to existing LED class drivers:
- leds-ns2, leds-max77650:
- add of_node_put() before return
- leds-pwm, leds-is31fl32xx:
- use struct_size() helper
- leds-lm3697, leds-lm36274, leds-lm3532:
- switch to use fwnode_property_count_uXX()
- leds-lm3532:
- fix brightness control for i2c mode
- change the define for the fs current register
- fixes for the driver for stability
- add full scale current configuration
- dt: Add property for full scale current.
- avoid potentially unpaired regulator calls
- move static keyword to the front of declarations
- fix optional led-max-microamp prop error handling
- leds-max77650:
- add of_node_put() before return
- add MODULE_ALIAS()
- Switch to fwnode property API
- leds-as3645a:
- fix misuse of strlcpy
- leds-netxbig:
- add of_node_put() in netxbig_leds_get_of_pdata()
- remove legacy board-file support
- leds-is31fl319x:
- simplify getting the adapter of a client
- leds-ti-lmu-common:
- fix coccinelle issue
- move static keyword to the front of declaration
- leds-syscon:
- use resource managed variant of device register
- leds-ktd2692:
- fix a typo in the name of a constant
- leds-lp5562:
- allow firmware files up to the maximum length
- leds-an30259a:
- fix typo
- leds-pca953x:
- include the right header"
* tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits)
leds: lm3532: Fix optional led-max-microamp prop error handling
led: triggers: Fix dereferencing of null pointer
leds: ti-lmu-common: Move static keyword to the front of declaration
leds: lm3532: Move static keyword to the front of declarations
leds: trigger: gpio: GPIO 0 is valid
leds: pwm: Use struct_size() helper
leds: is31fl32xx: Use struct_size() helper
leds: ti-lmu-common: Fix coccinelle issue in TI LMU
leds: lm3532: Avoid potentially unpaired regulator calls
leds: syscon: Use resource managed variant of device register
leds: Replace {devm_}led_classdev_register() macros with inlines
leds: Allow to call led_classdev_unregister() unconditionally
leds: lm3532: Add full scale current configuration
dt: lm3532: Add property for full scale current.
leds: lm3532: Fixes for the driver for stability
leds: lm3532: Change the define for the fs current register
leds: lm3532: Fix brightness control for i2c mode
leds: Switch to use fwnode instead of be stuck with OF one
leds: max77650: Switch to fwnode property API
led: triggers: Fix a memory leak bug
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
Pull ia64 updates from Tony Luck:
"The big change here is removal of support for SGI Altix"
* tag 'please-pull-ia64_for_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: (33 commits)
genirq: remove the is_affinity_mask_valid hook
ia64: remove CONFIG_SWIOTLB ifdefs
ia64: remove support for machvecs
ia64: move the screen_info setup to common code
ia64: move the ROOT_DEV setup to common code
ia64: rework iommu probing
ia64: remove the unused sn_coherency_id symbol
ia64: remove the SGI UV simulator support
ia64: remove the zx1 swiotlb machvec
ia64: remove CONFIG_ACPI ifdefs
ia64: remove CONFIG_PCI ifdefs
ia64: remove the hpsim platform
ia64: remove now unused machvec indirections
ia64: remove support for the SGI SN2 platform
drivers: remove the SGI SN2 IOC4 base support
drivers: remove the SGI SN2 IOC3 base support
qla2xxx: remove SGI SN2 support
qla1280: remove SGI SN2 support
misc/sgi-xp: remove SGI SN2 support
char/mspec: remove SGI SN2 support
...
|
|
PTR_ERR_OR_ZERO contains if(IS_ERR(...)) + PTR_ERR. It is better to
use it directly. hence just replace it.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Link: https://lore.kernel.org/r/1567665795-5901-3-git-send-email-zhongjiang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When using the macro le32_to_cpu(x), we need to correctly convert x to be
__le32 in case it is defined as u32 variable.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
|
|
If the initialization of a device failed, the driver prints an error
message with the id of the device. The device index on the file system is
that id divided by 2.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
We want to stop using the acronym KMD. Therefore, replace all locations
(except for register names we can't modify) where KMD is written to other
terms such as "Linux kernel driver" or "Host kernel driver", etc.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
To allow the user to use a custom file for the HWMON lm-sensors library
per card type, the driver needs to register the HWMON sensors with the
specific card type name.
The card name is supplied by the F/W running on the device. If the F/W is
old and doesn't supply a card name, a default card name is displayed as
the sensors group name.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Add a new opcode to INFO IOCTL to retrieve aggregate H/W events. i.e. the
events counters are NOT cleared upon device reset, but count from the
loading of the driver.
Add the code to support it in the device event handling function.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
Users and sysadmins usually want to know what is the device utilization as
a level 0 indication if they are efficiently using the device.
Add a new opcode to the INFO IOCTL that will return the device utilization
over the last period of 100-1000ms. The return value is 0-100,
representing as percentage the total utilization rate.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
The Coresight timestamp is enabled for a specific debug session using
the HL_DEBUG_OP_TIMESTAMP opcode of the debug IOCTL.
In order to have a perpetual timestamp that would be comparable between
various debug sessions, this patch moves the timestamp enablement to be
part of the HW initialization.
The HL_DEBUG_OP_TIMESTAMP opcode turns to be deprecated and shouldn't be
used. Old user-space that will call it won't see any change in the
behavior of the debug session.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Now that we don't print the queue testing messages, we need to print when
the reset is finished so whoever looks at the kernel log will know the
reset process was finished successfully and the driver is not stuck.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In some files the driver uses __le32_to_cpu while in other it uses
le32_to_cpu. Replace all __le32_to_cpu instances with le32_to_cpu for
consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
In some files the code use __cpu_to_le32/64 while in other it use
cpu_to_le32/64. Replace all __cpu_to_le32/64 instances with
cpu_to_le32/64 for consistency.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The HW IP information is relevant even if the device is disabled or in
reset, so always handle the corresponding INFO IOCTL opcode.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The char devices are currently exposed to user before the device and
driver initialization are done.
This patch moves the cdev and device adding to the system to the end of
the initialization sequence, while keeping the creation of the
structures at the beginning to allow the usage of dev_*().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch improves the security in the Debug IOCTL.
It adds checks that:
- The register index value is in the allowed range for all opcodes.
- The event types number is in the allowed range in SPMU enable.
- The events number is in the allowed range in SPMU disable.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch fixes a possible kernel crash when a user provides a too small
input structure to the Debug IOCTL.
The fix sets a default input structure and copies to it the user data.
In case the user provided as input a too small structure, the code will
use the default values taken from the default structure.
Note that in contrary to the input structure, the user can provide an
output structure with changing size or no size at all. Therefore the user
output structure validation is already done in the Debug logic later on.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Add a meaningful name to the general PSOC application status register
which better describes its usage in keeping the HW state.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The PSOC scratch-pad registers are used for communication with the
device CPU. This patch adds new definitions for these registers which
are more descriptive than their general names.
The new set of definitions also gathers and documents the current usage
of the scratch-pad registers by the driver and the device CPU.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This patch changes the driver to create two char devices for each ASIC
it discovers. This is done to allow system/monitoring applications to
query the device for stats, information, idle state and more, while also
allowing the deep-learning application to send work to the ASIC.
One char device is the original device, hlX. IOCTL calls through this
device file can perform any task on the device (compute, memory, queries).
The open function for this device will fail if it was called before but
the file-descriptor it created was not completely released yet (the
release callback function is not called from the kernel until all
instances of that FD are closed). The driver needs to keep this behavior
to support backward compatibility with existing userspace, which count
that the open will fail if the device is "occupied".
The second char device is called "hl_controlDx", where x is the same index
of the main device with a minor number of the original char device + 1.
Applications that open this device can only call the INFO IOCTL. There is
no limitation on the number of applications opening this device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch re-factors the device_setup_cdev() function to make it more
generic. It doesn't manipulate members of the driver's internal device
structure but instead works only on the arguments that are sent to it.
This is in preparation for using this function to create an additional
char device per ASIC.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a new list to the driver's device structure. The list will
keep the file private data structures that the driver creates when a user
process opens the device.
This change is needed because it is useless to try to count how many FD
are open. Instead, track our own private data structure per open file and
once it is released, remove it from the list. As long as the list is not
empty, it means we have a user that can do something with our device.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch renames the "user_ctx" field in the device structure to
"compute_ctx". This better reflects the meaning of this context.
In addition, we also check in the ctx_fini() that the debug mode should be
disabled only if the context being destroyed is the compute context. This
has no effect right now as we only have a single process and a single
context, but this makes the code more ready for multiple process support.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When the user query the dram usage of a context, show it the dram usage of
its context, not the user context that is currently running on the device.
This has no effect right now as we only have a single process and a single
context, but this makes the code more ready for multiple process support.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch calls the kill user process function after we rollback the
in-flight CSs. This is because the user process can't be closed while
there are open CSs. Therefore, there is no point of sending it a SIGKILL
before we do the rollback CS part.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a field to the context's structure that will hold a unique
handle for the context.
This will be needed when the user will create the context.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The ability of setting power management properties by the system
administrator (through sysfs properties) is only relevant for the GOYA
ASIC. Therefore, move the relevant sysfs properties to the GOYA sysfs
specific file, to make the properties appear in sysfs only for GOYA cards.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
In the driver timeout functions, we give the simulator a factor of 10
in the timeout. This was necessary when the requested timeout is small
but if it was a few seconds, this can result in a very large timeout which
is unnecessary.
This patch caps the maximum timeout of the simulator to 10 seconds, which
is our largest timeout in the code. That is more then enough for anything
the simulator is doing.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
When rejecting CS because of too many in-flight CS, print a debug message
about it as it useful to know when the user is debugging (it indicates a
back-pressure from the driver as the device is not fast enough to consume
the CS)
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
|
|
This property has attempted to show the number of open file descriptors on
the device. This was a stupid and futile attempt so remove this property
completely.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Introduce two options to control the use of the tlbie instruction. A
boot time option which completely disables the kernel using the
instruction, this is currently incompatible with HASH MMU, KVM, and
coherent accelerators.
And a debugfs option can be switched at runtime and avoids using tlbie
for invalidating CPU TLBs for normal process and kernel address
mappings. Coherent accelerators are still managed with tlbie, as will
KVM partition scope translations.
Cross-CPU TLB flushing is implemented with IPIs and tlbiel. This is a
basic implementation which does not attempt to make any optimisation
beyond the tlbie implementation.
This is useful for performance testing among other things. For example
in certain situations on large systems, using IPIs may be faster than
tlbie as they can be directed rather than broadcast. Later we may also
take advantage of the IPIs to do more interesting things such as trim
the mm cpumask more aggressively.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-7-npiggin@gmail.com
|
|
dma buf scatter list is never freed, free it!
Orignally detected by kmemleak:
backtrace:
[<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
[<ffffff8008373284>] sg_kmalloc+0x38/0x60
[<ffffff8008373144>] __sg_alloc_table+0x60/0x110
[<ffffff800837321c>] sg_alloc_table+0x28/0x58
[<ffffff800837336c>] __sg_alloc_table_from_pages+0xc0/0x1ac
[<ffffff800837346c>] sg_alloc_table_from_pages+0x14/0x1c
[<ffffff8008097a3c>] __iommu_get_sgtable+0x5c/0x8c
[<ffffff800850a1d0>] fastrpc_dma_buf_attach+0x84/0xf8
[<ffffff80085114bc>] dma_buf_attach+0x70/0xc8
[<ffffff8008509efc>] fastrpc_map_create+0xf8/0x1e8
[<ffffff80085086f4>] fastrpc_device_ioctl+0x508/0x900
[<ffffff80082428c8>] compat_SyS_ioctl+0x128/0x200
[<ffffff80080832c4>] el0_svc_naked+0x34/0x38
[<ffffffffffffffff>] 0xffffffffffffffff
Reported-by: Mayank Chopra <mak.chopra@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190829092926.12037-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma buf refcount has to be done by the driver which is going to use the fd.
This driver already does refcount on the dmabuf fd if its actively using it
but also does an additional refcounting via extra ioctl.
This additional refcount can lead to memory leak in cases where the
applications fail to call the ioctl to decrement the refcount.
So remove this extra refcount in the ioctl
More info of dma buf usage at drivers/dma-buf/dma-buf.c
Reported-by: Mayank Chopra <mak.chopra@codeaurora.org>
Reported-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190829092926.12037-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove unused INIT_MEMLEN_MAX define.
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Abhinav Asati <asatiabhi@codeaurora.org>
Signed-off-by: Vamsi Singamsetty <vamssi@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190829092926.12037-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As fastrpc_rpmsg_remove() returns the rpdev of the channel context is no
longer a valid object, so ensure to update the channel context to no
longer reference the old object and guard in the invoke code path
against dereferencing it.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mayank Chopra <mak.chopra@codeaurora.org>
Signed-off-by: Abhinav Asati <asatiabhi@codeaurora.org>
Signed-off-by: Vamsi Singamsetty <vamssi@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190829092926.12037-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The channel context is referenced from the fastrpc user and might as
user space holds the file descriptor open outlive the fastrpc device,
which is removed when the remote processor is shutting down.
Reference count the channel context in order to retain this object until
all references has been relinquished.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Mayank Chopra <mak.chopra@codeaurora.org>
Signed-off-by: Abhinav Asati <asatiabhi@codeaurora.org>
Signed-off-by: Vamsi Singamsetty <vamssi@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20190829092926.12037-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Time has come to get rid of the old eeprom driver. The at24 driver
should be used instead. So mark the eeprom driver as deprecated and
give users some time to migrate. Then we can remove the legacy
eeprom driver completely.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190902104838.058725c2@endymion
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.4
at24: updates for v5.4
- don't include an unneeded header
|
|
We need the fixes in here as well for testing and merges
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The compaction code already marks pages as offline when it enqueues
pages in the ballooned page list, and removes the mapping when the pages
are removed from the list. VMware balloon also updates the flags,
instead of letting the balloon-compaction logic handle it, which causes
the assertion VM_BUG_ON_PAGE(!PageOffline(page)) to fire, when
__ClearPageOffline is called the second time. This causes the following
crash.
[ 487.104520] kernel BUG at include/linux/page-flags.h:749!
[ 487.106364] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
[ 487.107681] CPU: 7 PID: 1106 Comm: kworker/7:3 Not tainted 5.3.0-rc5balloon #227
[ 487.109196] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 12/12/2018
[ 487.111452] Workqueue: events_freezable vmballoon_work [vmw_balloon]
[ 487.112779] RIP: 0010:vmballoon_release_page_list+0xaa/0x100 [vmw_balloon]
[ 487.114200] Code: fe 48 c1 e7 06 4c 01 c7 8b 47 30 41 89 c1 41 81 e1 00 01 00 f0 41 81 f9 00 00 00 f0 74 d3 48 c7 c6 08 a1 a1 c0 e8 06 0d e7 ea <0f> 0b 44 89 f6 4c 89 c7 e8 49 9c e9 ea 49 8d 75 08 49 8b 45 08 4d
[ 487.118033] RSP: 0018:ffffb82f012bbc98 EFLAGS: 00010246
[ 487.119135] RAX: 0000000000000037 RBX: 0000000000000001 RCX: 0000000000000006
[ 487.120601] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9a85b6bd7620
[ 487.122071] RBP: ffffb82f012bbcc0 R08: 0000000000000001 R09: 0000000000000000
[ 487.123536] R10: 0000000000000000 R11: 0000000000000000 R12: ffffb82f012bbd00
[ 487.125002] R13: ffffe97f4598d9c0 R14: 0000000000000000 R15: ffffb82f012bbd34
[ 487.126463] FS: 0000000000000000(0000) GS:ffff9a85b6bc0000(0000) knlGS:0000000000000000
[ 487.128110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 487.129316] CR2: 00007ffe6e413ea0 CR3: 0000000230b18001 CR4: 00000000003606e0
[ 487.130812] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 487.132283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 487.133749] Call Trace:
[ 487.134333] vmballoon_deflate+0x22c/0x390 [vmw_balloon]
[ 487.135468] vmballoon_work+0x6e7/0x913 [vmw_balloon]
[ 487.136711] ? process_one_work+0x21a/0x5e0
[ 487.138581] process_one_work+0x298/0x5e0
[ 487.139926] ? vmballoon_migratepage+0x310/0x310 [vmw_balloon]
[ 487.141610] ? process_one_work+0x298/0x5e0
[ 487.143053] worker_thread+0x41/0x400
[ 487.144389] kthread+0x12b/0x150
[ 487.145582] ? process_one_work+0x5e0/0x5e0
[ 487.146937] ? kthread_create_on_node+0x60/0x60
[ 487.148637] ret_from_fork+0x3a/0x50
Fix it by updating the PageOffline indication only when a 2MB page is
enqueued and dequeued. The 4KB pages will be handled correctly by the
balloon compaction logic.
Fixes: 83a8afa72e9c ("vmw_balloon: Compaction support")
Cc: David Hildenbrand <david@redhat.com>
Reported-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20190820160121.452-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Francois reported that VMware balloon gets stuck after a balloon reset,
when the VMCI doorbell is removed. A similar error can occur when the
balloon driver is removed with the following splat:
[ 1088.622000] INFO: task modprobe:3565 blocked for more than 120 seconds.
[ 1088.622035] Tainted: G W 5.2.0 #4
[ 1088.622087] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1088.622205] modprobe D 0 3565 1450 0x00000000
[ 1088.622210] Call Trace:
[ 1088.622246] __schedule+0x2a8/0x690
[ 1088.622248] schedule+0x2d/0x90
[ 1088.622250] schedule_timeout+0x1d3/0x2f0
[ 1088.622252] wait_for_completion+0xba/0x140
[ 1088.622320] ? wake_up_q+0x80/0x80
[ 1088.622370] vmci_resource_remove+0xb9/0xc0 [vmw_vmci]
[ 1088.622373] vmci_doorbell_destroy+0x9e/0xd0 [vmw_vmci]
[ 1088.622379] vmballoon_vmci_cleanup+0x6e/0xf0 [vmw_balloon]
[ 1088.622381] vmballoon_exit+0x18/0xcc8 [vmw_balloon]
[ 1088.622394] __x64_sys_delete_module+0x146/0x280
[ 1088.622408] do_syscall_64+0x5a/0x130
[ 1088.622410] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1088.622415] RIP: 0033:0x7f54f62791b7
[ 1088.622421] Code: Bad RIP value.
[ 1088.622421] RSP: 002b:00007fff2a949008 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1088.622426] RAX: ffffffffffffffda RBX: 000055dff8b55d00 RCX: 00007f54f62791b7
[ 1088.622426] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055dff8b55d68
[ 1088.622427] RBP: 000055dff8b55d00 R08: 00007fff2a947fb1 R09: 0000000000000000
[ 1088.622427] R10: 00007f54f62f5cc0 R11: 0000000000000206 R12: 000055dff8b55d68
[ 1088.622428] R13: 0000000000000001 R14: 000055dff8b55d68 R15: 00007fff2a94a3f0
The cause for the bug is that when the "delayed" doorbell is invoked, it
takes a reference on the doorbell entry and schedules work that is
supposed to run the appropriate code and drop the doorbell entry
reference. The code ignores the fact that if the work is already queued,
it will not be scheduled to run one more time. As a result one of the
references would not be dropped. When the code waits for the reference
to get to zero, during balloon reset or module removal, it gets stuck.
Fix it. Drop the reference if schedule_work() indicates that the work is
already queued.
Note that this bug got more apparent (or apparent at all) due to
commit ce664331b248 ("vmw_balloon: VMCI_DOORBELL_SET does not check status").
Fixes: 83e2ec765be03 ("VMCI: doorbell implementation.")
Reported-by: Francois Rigault <rigault.francois@gmail.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Adit Ranadive <aditr@vmware.com>
Cc: Alexios Zavras <alexios.zavras@intel.com>
Cc: Vishnu DASA <vdasa@vmware.com>
Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Link: https://lore.kernel.org/r/20190820202638.49003-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
Updates to LKDTM for -next
- split WARNING into two tests: with message and without
- add prototype-granularity forward CFI test
* tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm: Split WARNING into separate tests
lkdtm: Add Control Flow Integrity test
|
|
lkdtm/bugs.c:94:2: error: format '%d' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Werror=format=]
pr_info("Calling function with %d frame size to depth %d ...\n",
^
THREAD_SIZE is defined as a unsigned long, cast CONFIG_FRAME_WARN to
unsigned long as well.
Fixes: 24cccab42c419 ("lkdtm/bugs: Adjust recursion test to avoid elision")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20190827173619.170065-1-rrangel@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Tiger Lake Point device ID for TGP LP.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190819103210.32748-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a spelling mistake in a dev_dbg message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dragan Cvetic <dragan.cvetic@xilinx.com>
Link: https://lore.kernel.org/r/20190819094137.390-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
