summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)Author
2011-03-29drivers: Final irq namespace conversionThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: kdb: add usage string of 'per_cpu' command kgdb,x86_64: fix compile warning found with sparse kdb: code cleanup to use macro instead of value kgdboc,kgdbts: strlen() doesn't count the terminator
2011-03-25kgdboc,kgdbts: strlen() doesn't count the terminatorDan Carpenter
This is an off by one because strlen() doesn't count the null terminator. We strcpy() these strings into an array of size MAX_CONFIG_LEN. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2011-03-22drivers/misc/pch_phub.c: add MODULE_DEVICE_TABLEAxel Lin
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/misc/ep93xx_pwm.c: world-writable sysfs filesVasiliy Kulikov
Don't allow everybody to change device settings. Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Acked-by: Hartley Sweeten <hartleys@visionengravers.com> Cc: Matthieu Crapet <mcrapet@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/misc/atmel_tclib.c: fix a memory leakAxel Lin
request_mem_region() will call kzalloc to allocate memory for struct resource. release_resource() unregisters the resource but does not free the allocated memory, thus use release_mem_region() instead to fix the memory leak. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/misc/hmc6352.c: fix wrong return value checking for i2c_master_recv()Axel Lin
i2c_master_recv() returns negative errno, or else the number of bytes read. Thus i2c_master_recv(client, i2c_data, 2) returns 2 instead of 1 in success case. [akpm@linux-foundation.org: make `ret' signed] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Kalhan Trisal <kalhan.trisal@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/misc/apds9802als.c: put the device into runtime suspend after ↵Hong Liu
resume()/probe() is handled Put the device into runtime suspend after resume()/probe() is handled by the PM core and the device core code. No need to manually add them in each single driver. And correct the runtime state in remove(). Signed-off-by: Hong Liu <hong.liu@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22ST SPEAr: PCIE gadget suppportPratyush Anand
This is a configurable gadget. can be configured by configfs interface. Any IP available at PCIE bus can be programmed to be used by host controller.It supoorts both INTX and MSI. By default, the gadget is configured for INTX and SYSRAM1 is mapped to BAR0 with size 0x1000 Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22drivers/misc/bmp085.c: free initmem memoryShubhrajyoti Datta
Free the memory that is used only at init Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22bh1780gli: convert to dev pm opsShubhrajyoti Datta
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-21Move lis3lv02d drivers to drivers/miscJean Delvare
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't belong to drivers/hwmon. Move them to drivers/misc, short of a better home. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Acked-by: Eric Piel <eric.piel@tremplin-utc.net> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Tested-by: Eric Piel <eric.piel@tremplin-utc.net> Tested-by: Takashi Iwai <tiwai@suse.de>
2011-03-20Merge branch 'trivial' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6 * 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits) video: change to new flag variable scsi: change to new flag variable rtc: change to new flag variable rapidio: change to new flag variable pps: change to new flag variable net: change to new flag variable misc: change to new flag variable message: change to new flag variable memstick: change to new flag variable isdn: change to new flag variable ieee802154: change to new flag variable ide: change to new flag variable hwmon: change to new flag variable dma: change to new flag variable char: change to new flag variable fs: change to new flag variable xtensa: change to new flag variable um: change to new flag variables s390: change to new flag variable mips: change to new flag variable ... Fix up trivial conflict in drivers/hwmon/Makefile
2011-03-17misc: change to new flag variablematt mooney
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-03-16Merge branch 'tty-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits) pch_uart: reference clock on CM-iTC pch_phub: add new device ML7213 n_gsm: fix UIH control byte : P bit should be 0 n_gsm: add a documentation serial: msm_serial_hs: Add MSM high speed UART driver tty_audit: fix tty_audit_add_data live lock on audit disabled tty: move cd1865.h to drivers/staging/tty/ Staging: tty: fix build with epca.c driver pcmcia: synclink_cs: fix prototype for mgslpc_ioctl() Staging: generic_serial: fix double locking bug nozomi: don't use flush_scheduled_work() tty/serial: Relax the device_type restriction from of_serial MAINTAINERS: Update HVC file patterns tty: phase out of ioctl file pointer for tty3270 as well tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile pch_uart: Fix DMA channel miss-setting issue. pch_uart: fix exclusive access issue pch_uart: fix auto flow control miss-setting issue pch_uart: fix uart clock setting issue pch_uart : Use dev_xxx not pr_xxx ... Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied twice, then changes to the same area in one branch)
2011-03-16Merge branch 'driver-core-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (50 commits) printk: do not mangle valid userspace syslog prefixes efivars: Add Documentation efivars: Expose efivars functionality to external drivers. efivars: Parameterize operations. efivars: Split out variable registration efivars: parameterize efivars efivars: Make efivars bin_attributes dynamic efivars: move efivars globals into struct efivars drivers:misc: ti-st: fix debugging code kref: Fix typo in kref documentation UIO: add PRUSS UIO driver support Fix spelling mistakes in Documentation/zh_CN/SubmittingPatches firmware: Fix unaligned memory accesses in dmi-sysfs firmware: Add documentation for /sys/firmware/dmi firmware: Expose DMI type 15 System Event Log firmware: Break out system_event_log in dmi-sysfs firmware: Basic dmi-sysfs support firmware: Add DMI entry types to the headers Driver core: convert platform_{get,set}_drvdata to static inline functions Translate linux-2.6/Documentation/magic-number.txt into Chinese ...
2011-03-16Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: fix build failure introduced by s/freezeable/freezable/ workqueue: add system_freezeable_wq rds/ib: use system_wq instead of rds_ib_fmr_wq net/9p: replace p9_poll_task with a work net/9p: use system_wq instead of p9_mux_wq xfs: convert to alloc_workqueue() reiserfs: make commit_wq use the default concurrency level ocfs2: use system_wq instead of ocfs2_quota_wq ext4: convert to alloc_workqueue() scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path scsi/be2iscsi,qla2xxx: convert to alloc_workqueue() misc/iwmc3200top: use system_wq instead of dedicated workqueues i2o: use alloc_workqueue() instead of create_workqueue() acpi: kacpi*_wq don't need WQ_MEM_RECLAIM fs/aio: aio_wq isn't used in memory reclaim path input/tps6507x-ts: use system_wq instead of dedicated workqueue cpufreq: use system_wq instead of dedicated workqueues wireless/ipw2x00: use system_wq instead of dedicated workqueues arm/omap: use system_wq in mailbox workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
2011-03-14pch_uart: reference clock on CM-iTCDenis Turischev
Default clock source for UARTs on Topcliff is external UART_CLK. On CM-iTC USB_48MHz is used instead. After VCO2PLL and DIV manipulations UARTs will receive 192 MHz. Clock manipulations on Topcliff are controlled in pch_phub.c v2: redone against the linux-next tree v3: redone against linux/kernel/git/next/linux-next.git snapshot Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14pch_phub: add new device ML7213Tomoya MORINAGA
Add ML7213 device information. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-09drivers:misc: ti-st: fix debugging codePavan Savoy
debug code in TI-ST driver can be enabled by #defining DEBUG in the first line of the code and in case debugfs is mounted, the 2 entries in /sys/kernel/debug/ti-st/ will also provide useful information. These 2 were broken because of the recent changes to the parsing logic and the registration mechanism of the protocol drivers, this patch fixes them. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-04drivers/misc/bmp085.c: add MODULE_DEVICE_TABLEAxel Lin
The device table is required to load modules based on modaliases. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shubhrajyoti D <shubhrajyoti@ti.com> Cc: Christoph Mair <christoph.mair@gmail.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Merge branch 'master' into for-2.6.39Tejun Heo
2011-02-16workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable'Tejun Heo
There are two spellings in use for 'freeze' + 'able' - 'freezable' and 'freezeable'. The former is the more prominent one. The latter is mostly used by workqueue and in a few other odd places. Unify the spelling to 'freezable'. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Alex Dubov <oakad@yahoo.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Steven Whitehouse <swhiteho@redhat.com>
2011-02-04drivers:misc: ti-st: remove multiple gpio handlingPavan Savoy
TI shared transport driver previously intended to expose rfkill entries for each of the protocol gpio that the chip would have. However now in case such gpios exist, which requires to be enabled for a specific protocol, the responsibility lay on protocol driver. This patch removes the request/free of multiple gpios, rfkill struct references and also removes the chip_toggle function. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04drivers:misc: ti-st: fix hci-ll on wake_ind collisionPavan Savoy
Where file-transfer stops/pauses in between, is result of a HCI-LL anamoly in ST LL driver. ST LL did not copy the contents of WaitQ into the TxQ, when a WAKEUP_IND collision happened. Make also sure, that the copying mechanism is safe, by wrapping it around spin locks inside st_int_recv(). This was easily reproduced when the sleep timeout was reduced to 100ms for HCI-LL. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04drivers:misc: ti-st: firmware download optimizationPavan Savoy
To fasten the process of firmware download, the chip allows disabling of the command complete event generation from host. In these cases, only few very essential commands would have the command complete events and hence the wait associated with them. So now the driver would wait for a command complete event, only when it comes across a wait event during firmware parsing. This would also mean we need to skip not just the change baud rate command but also the wait for it. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04drivers:misc: ti-st: set right debug levels for logsPavan Savoy
pr_debug-ing few pr_infos from the data paths such as tty receive and write so as to reduce debugs when we have higher logging levels enabled undef VERBOSE in receive to avoid huge logs when log level 8 is set. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04drivers:misc: ti-st: fix error codesPavan Savoy
set-right the error codes that the shared transport driver returns. Instead of magic numbers like -1, return relevant codes such as ETIMEDOUT or EIO, EAGAIN when wait times out or uart write bytes don't match expected value or when registration fails and needs to be attempted again. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04drivers:misc: ti-st: move from rfkill to sysfsPavan Savoy
The communication between ST KIM and UIM was interfaced over the /dev/rfkill device node. Move the interface to a simpler less abusive sysfs entry mechanism and document it in Documentation/ABI/testing/ under sysfs-platform-kim. Shared transport driver would now read the UART details originally received by bootloader or firmware as platform data. The data read will be shared over sysfs entries for the user-space UIM or other n/w manager/plugins to be read, and assist the driver by opening up the UART, setting the baud-rate and installing the line discipline. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-04drivers:misc: ti-st: register with channel IDsPavan Savoy
The architecture of shared transport had begun with individual protocols like bluetooth, fm and gps telling the shared transport what sort of protocol they are and then expecting the ST driver to parse the incoming data from chip and forward data only relevant to the protocol drivers. This change would mean each protocol drivers would also send information to ST driver as to how to intrepret their protocol data coming out of the chip. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03pch_phub: add new device ML7213Tomoya MORINAGA
Add ML7213 device information. ML7213 is companion chip of Intel Atom E6xx series for IVI(In-Vehicle Infotainment). ML7213 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-01misc/iwmc3200top: use system_wq instead of dedicated workqueuesTejun Heo
With cmwq, there's no reason to use separate workqueues in iwmc3200top. Drop them and use system_wq instead. The used work items are sync flushed before driver detach. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Tomas Winkler <tomas.winkler@intel.com>
2011-01-14misc: Make AB8500_PWM driver depend on U8500 due to PWM breakageMark Brown
Since we don't have a PWM API every PWM driver ends up exporting its own version and we need to limit the platforms we try to build them on in order to avoid multiple definitions. As the AB8500 is normally a companion chip for the U8500 CPU depend on that architecture. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14misc: Fix cs5535 printk warningsJoe Perches
drivers/misc/cs5535-mfgpt.c: In function 'cs5535_mfgpt_probe': drivers/misc/cs5535-mfgpt.c:320: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t' drivers/misc/cs5535-mfgpt.c:320: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t' Use vsprintf extension %pR to format resource. Original-patch-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14gpio/misc: Add MODULE_ALIAS entries for CS5535 functionsAndres Salomon
This adds MODULE_ALIAS entries to the various cs5535 subdevice modules; this allows the modules to automatically be loaded when cs5535-mfd loads. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14misc: Convert cs5535-mfgpt from pci device to platform deviceAndres Salomon
The cs5535-mfd driver now takes care of the PCI BAR handling; this simplifies the mfgpt driver a bunch. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-13VMware balloon: stop locking pages when hypervisor tells us enoughDmitry Torokhov
When hypervisor decides to decrease target balloon size while the balloon driver tries to lock pages hypervisor may respond with VMW_BALLOON_PPN_NOTNEEDED. Use this data and immediately stop reserving pages and wait for the next update cycle to fetch new target instead of continuing trying to lock pages until size of refused list grows above VMW_BALLOON_MAX_REFUSED (16) pages. As a result the driver stops bothering the hypervisor with its attempts to lock more pages that are not needed anymore. Most likely next order from hypervisor will be to reduce ballon size anyway. It is a small optimization. Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-10Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2010-12-24ioc4: use static work_struct for ioc4_load_modules()Tejun Heo
There is no reason to dynamically allocate work_struct for ioc4_load_modules(). It makes the code more complex and makes it impossible to flush the work directly. Use static work ioc4_load_modules_work instead and flush it directly on exit. This removes the use of flush_scheduled_work() which is being deprecated. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Brent Casavant <bcasavan@sgi.com>
2010-12-24misc/at24: add more sanity checks for parametersWolfram Sang
Side-effects happen when passing 0 to either io_limit or page_size. Give an error in case of this misconfiguration. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-24misc/at24: parse device tree dataWolfram Sang
Information about the pagesize and read-only-status may also come from the devicetree. Parse this data, too, and act accordingly. While we are here, change the initialization printout a bit. write_max is useful to know to detect performance bottlenecks, the rest is superfluous. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-12-22Merge branch 'master' into for-nextJiri Kosina
Conflicts: MAINTAINERS arch/arm/mach-omap2/pm24xx.c drivers/scsi/bfa/bfa_fcpim.c Needed to update to apply fixes for which the old branch was too outdated.
2010-11-25drivers/misc/isl29020.c: remove incorrect kfree in isl29020_remove()Axel Lin
struct als_data *data is not used in this driver at all. Also add a missing ">" character for MODULE_AUTHOR. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25sgi-xpc: XPC fails to discover partitions with all nasids above 128Robin@sgi.com
UV hardware defines 256 memory protection regions versus the baseline 64 with increasing size for the SN2 ia64. This was overlooked when XPC was modified to accomodate both UV and SN2. Without this patch, a user could reconfigure their existing system and suddenly disable cross-partition communications with no indication of what has gone wrong. It also prevents larger configurations from using cross-partition communication. Signed-off-by: Robin Holt <holt@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-15i2c: Remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15spelling fix in drivers/misc/KconfigJonathan Neuschäfer
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-12drivers/misc/bh1770glc.c: error handling in bh1770_power_state_store()Dan Carpenter
There was a signedness bug so "ret" was never less than zero and that breaks the error handling. Also in the original code it would overwrite ret and the result is still negative but it's bogus number instead of the correct error code. Signed-off-by: Dan Carpenter <error27@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12drivers/misc/apds9802als.c: fix signedness bugVasiliy Kulikov
i2c_smbus_read_byte_data() may return negative error code. This is not seen to als_sensing_range_store() as the result is stored in unsigned int. Made it signed. Signed-off-by: Vasiliy Kulikov <segooon@gmail.com> Cc: Hong Liu <hong.liu@intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Anantha Narayanan <anantha.narayanan@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12misc/isl29020: signedness bug in als_sensing_range_store()Dan Carpenter
"ret_val" is supposed to be signed here or the error handling breaks. Also we should check the return value from i2c_smbus_read_byte_data(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 19:41:11 +0000