summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2014-07-21mfd: max77686: Convert to use regmap_irqJavier Martinez Canillas
By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-21mfd: sun6i-prcm: Add support for Allwinner A23 PRCMChen-Yu Tsai
The Allwinner A23 SoC has a PRCM unit like the previous A31 SoC. The differences are the AR100 clock can no longer be modified, the APB0 clock has different divisors, and some clock gates are gone. This patch adds a compatible with a modified subdevice list for the A23. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-21mfd: ab8500-debugfs: BIG clean-upLee Jones
When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Use the proper size when looking at the cros_ec_i2c resultDoug Anderson
We know how many bytes the EC should be sending us (which is also the number of bytes transferred) and also how many bytes the EC actually wanted to send to us. When computing the checksum and copying back data let's make sure we take the lesser of the two of those. We'll also complain if the EC tried to send us too many bytes. The EC sending us too few bytes is legit for when we send the EC an invalid command. This is based on similar code in cros_ec_spi. Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-core: Resolve code style issuesLee Jones
Soothes the following checkpatch warnings: WARNING: line over 80 characters #151: FILE: drivers/mfd/ab8500-core.c:151: + 0, 1, 2, 3, 4, -1, -1, -1, -1, 11, 18, 19, 20, 21, 12, 13, 24, 5, 22, 23, ERROR: spaces required around that '=' (ctx:VxW) #325: FILE: drivers/mfd/ab8500-core.c:325: + ret= mask_and_set_register_interruptible(ab8500, bank, reg, ^ WARNING: line over 80 characters #418: FILE: drivers/mfd/ab8500-core.c:418: + else if (offset >= AB9540_INT_GPIO50R && offset <= AB9540_INT_GPIO54R) WARNING: line over 80 characters #420: FILE: drivers/mfd/ab8500-core.c:420: + else if (offset == AB8540_INT_GPIO43R || offset == AB8540_INT_GPIO44R) ERROR: spaces required around that '==' (ctx:VxV) #454: FILE: drivers/mfd/ab8500-core.c:454: + if ((i==3) && (*offset >= 24)) ^ ERROR: code indent should use tabs where possible #576: FILE: drivers/mfd/ab8500-core.c:576: + .map = ab8500_irq_map,$ WARNING: please, no spaces at the start of a line #576: FILE: drivers/mfd/ab8500-core.c:576: + .map = ab8500_irq_map,$ ERROR: code indent should use tabs where possible #577: FILE: drivers/mfd/ab8500-core.c:577: + .xlate = irq_domain_xlate_twocell,$ WARNING: please, no spaces at the start of a line #577: FILE: drivers/mfd/ab8500-core.c:577: + .xlate = irq_domain_xlate_twocell,$ WARNING: char * array declaration might be better as static const #1554: FILE: drivers/mfd/ab8500-core.c:1554: + static char *switch_off_status[] = { WARNING: char * array declaration might be better as static const #1563: FILE: drivers/mfd/ab8500-core.c:1563: + static char *turn_on_status[] = { WARNING: sizeof *ab8500 should be sizeof(*ab8500) #1582: FILE: drivers/mfd/ab8500-core.c:1582: + ab8500 = devm_kzalloc(&pdev->dev, sizeof *ab8500, GFP_KERNEL); ERROR: space required after that close brace '}' #1639: FILE: drivers/mfd/ab8500-core.c:1639: + }/* Configure AB8500 or AB9540 IRQ */ WARNING: line over 80 characters #1652: FILE: drivers/mfd/ab8500-core.c:1652: + ab8500->oldmask = devm_kzalloc(&pdev->dev, ab8500->mask_size, GFP_KERNEL); WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(... to printk(KERN_CONT ... #1677: FILE: drivers/mfd/ab8500-core.c:1677: + printk(KERN_CONT " \"%s\"", WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(... to printk(KERN_CONT ... #1682: FILE: drivers/mfd/ab8500-core.c:1682: + printk(KERN_CONT "\n"); WARNING: Prefer [subsystem eg: netdev]_cont([subsystem]dev, ... then dev_cont(dev, ... then pr_cont(... to printk(KERN_CONT ... #1684: FILE: drivers/mfd/ab8500-core.c:1684: + printk(KERN_CONT " None\n"); WARNING: printk() should include KERN_ facility level #1695: FILE: drivers/mfd/ab8500-core.c:1695: + printk("\"%s\" ", turn_on_status[i]); WARNING: printk() should include KERN_ facility level #1700: FILE: drivers/mfd/ab8500-core.c:1700: + printk("None\n"); total: 5 errors, 14 warnings, 1869 lines checked Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab3100-core: Correct code sytle problemsLee Jones
Corrects the following checkpatch gripes: WARNING: quoted string split across lines #95: FILE: drivers/mfd/ab3100-core.c:95: + "write error (write register) " + "%d bytes transferred (expected 2)\n", WARNING: quoted string split across lines #139: FILE: drivers/mfd/ab3100-core.c:139: + "write error (write test register) " + "%d bytes transferred (expected 2)\n", WARNING: quoted string split across lines #175: FILE: drivers/mfd/ab3100-core.c:175: + "write error (send register address) " + "%d bytes transferred (expected 1)\n", WARNING: quoted string split across lines #193: FILE: drivers/mfd/ab3100-core.c:193: + "write error (read register) " + "%d bytes transferred (expected 1)\n", WARNING: quoted string split across lines #241: FILE: drivers/mfd/ab3100-core.c:241: + "write error (send first register address) " + "%d bytes transferred (expected 1)\n", WARNING: quoted string split across lines #256: FILE: drivers/mfd/ab3100-core.c:256: + "write error (read register page) " + "%d bytes transferred (expected %d)\n", WARNING: quoted string split across lines #299: FILE: drivers/mfd/ab3100-core.c:299: + "write error (maskset send address) " + "%d bytes transferred (expected 1)\n", WARNING: quoted string split across lines #314: FILE: drivers/mfd/ab3100-core.c:314: + "write error (maskset read register) " + "%d bytes transferred (expected 1)\n", WARNING: quoted string split across lines #334: FILE: drivers/mfd/ab3100-core.c:334: + "write error (write register) " + "%d bytes transferred (expected 2)\n", WARNING: please, no spaces at the start of a line #374: FILE: drivers/mfd/ab3100-core.c:374: + return blocking_notifier_chain_unregister(&ab3100->event_subscribers,$ WARNING: Prefer seq_puts to seq_printf #458: FILE: drivers/mfd/ab3100-core.c:458: + seq_printf(s, "AB3100 registers:\n"); WARNING: quoted string split across lines #564: FILE: drivers/mfd/ab3100-core.c:564: + "debug write reg[0x%02x] with 0x%02x, " + "after readback: 0x%02x\n", WARNING: quoted string split across lines #723: FILE: drivers/mfd/ab3100-core.c:723: + "AB3100 P1E variant detected, " + "forcing chip to 32KHz\n"); WARNING: quoted string split across lines #882: FILE: drivers/mfd/ab3100-core.c:882: + "could not communicate with the AB3100 analog " + "baseband chip\n"); WARNING: quoted string split across lines #906: FILE: drivers/mfd/ab3100-core.c:906: + dev_err(&client->dev, "accepting it anyway. Please update " + "the driver.\n"); total: 0 errors, 15 warnings, 999 lines checked Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: aat2870-core: Stop using obsolte simple_strtoul()Lee Jones
Soothes checkpatch warning: WARNING: simple_strtoul is obsolete, use kstrtoul instead #306: FILE: drivers/mfd/aat2870-core.c:306: + addr = simple_strtoul(start, &start, 16); Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: 88pm860x-i2c: Repair 'space before tab' warningLee Jones
Fixes checkpatch warning: WARNING: please, no space before tabs #5: FILE: drivers/mfd/88pm860x-i2c.c:5: + * ^IHaojian Zhuang <haojian.zhuang@marvell.com>$ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: 88pm860x-core: Repair formatting issuesLee Jones
Fixes the following checkpatch warnings: WARNING: please, no space before tabs #5: FILE: drivers/mfd/88pm860x-core.c:5: + * ^IHaojian Zhuang <haojian.zhuang@marvell.com>$ WARNING: line over 80 characters #143: FILE: drivers/mfd/88pm860x-core.c:143: + {PM8607_IRQ_AUDIO_SHORT, PM8607_IRQ_AUDIO_SHORT, "audio-short", IORESOURCE_IRQ,}, WARNING: line over 80 characters #153: FILE: drivers/mfd/88pm860x-core.c:153: + {PM8607_IRQ_CHG_DONE, PM8607_IRQ_CHG_DONE, "charging done", IORESOURCE_IRQ,}, WARNING: line over 80 characters #154: FILE: drivers/mfd/88pm860x-core.c:154: + {PM8607_IRQ_CHG_FAIL, PM8607_IRQ_CHG_FAIL, "charging timeout", IORESOURCE_IRQ,}, WARNING: line over 80 characters #155: FILE: drivers/mfd/88pm860x-core.c:155: + {PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault", IORESOURCE_IRQ,}, WARNING: line over 80 characters #156: FILE: drivers/mfd/88pm860x-core.c:156: + {PM8607_IRQ_GPADC1, PM8607_IRQ_GPADC1, "battery temperature", IORESOURCE_IRQ,}, WARNING: Avoid unnecessary line continuations #571: FILE: drivers/mfd/88pm860x-core.c:571: + struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ WARNING: line over 80 characters #634: FILE: drivers/mfd/88pm860x-core.c:634: + ret = request_threaded_irq(chip->core_irq, NULL, pm860x_irq, flags | IRQF_ONESHOT, WARNING: Unnecessary parentheses - maybe == should be = ? #874: FILE: drivers/mfd/88pm860x-core.c:874: + if ((pdata == NULL)) WARNING: quoted string split across lines #1001: FILE: drivers/mfd/88pm860x-core.c:1001: + dev_err(chip->dev, "Failed to detect Marvell 88PM8607. " + "Chip ID: %02x\n", ret); WARNING: quoted string split across lines #1124: FILE: drivers/mfd/88pm860x-core.c:1124: + dev_err(dev, "Not found \"marvell,88pm860x-slave-addr\" " + "property\n"); total: 0 errors, 11 warnings, 1281 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: 88pm805: msleep(1ms ~ 20ms) may not do what the caller intendsLee Jones
This code has been working since 2012, as limiting the time between 1ms and 3ms is unlikely to do any harm. Soothes checkpatch warning: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt #161: FILE: drivers/mfd/88pm805.c:161: + msleep(1); Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: tps65910: Rid data size incompatibility warn when building for 64bitLee Jones
Extinguishes: ../drivers/mfd/tps65910.c: In function ‘tps65910_parse_dt’: ../drivers/mfd/tps65910.c:404:14: warning: cast from pointer to integer of different size Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Rid data size incompatibility warn when building for 64bitLee Jones
Extinguishes: ../drivers/mfd/arizona-core.c: In function ‘arizona_of_get_type’: ../drivers/mfd/arizona-core.c:505:10: warning: cast from pointer to integer of different size Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: stmpe: Rid data size incompatibility warn when building for 64bitLee Jones
Extinguishes: ../drivers/mfd/stmpe-i2c.c: In function ‘stmpe_i2c_probe’: ../drivers/mfd/stmpe-i2c.c:88:13: warning: cast from pointer to integer of different size partnum = (int)of_id->data; Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: intel_soc_pmic: Rid compiler working for unused ACPI match tableLee Jones
If CONIFG_ACPI is not enabled we receive the following warning: drivers/mfd/intel_soc_pmic_core.c:144:30: warning: ‘intel_soc_pmic_acpi_match’ defined but not used This patch rids it. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs: Simplify invalid debugfs data checkingLee Jones
Noticed during a coding review, if we reorganised the checking a little, we can rid the code of a pointless 'else'. Whilst looking for this particular code hunk I noticed another pointless 'else', which I've subsequently fixed in this patch. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-core: Remove pointless else in if statementLee Jones
Save a line of code (albeit, it's replaced by a blank line, but still), as the else is superfluous. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs: Cleaning up unnecessary to test, unsigned can't be ↵Rickard Strandqvist
negative. Unsigned variable can't be negative so it is unnecessary to test it This was found using a static code analysis program called cppcheck Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs: Remove unnecessary null test before ↵Fabian Frederick
debugfs_remove_recursive Fix checkpatch warning: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Move EC interrupt to cros_ec_keybAndrew Bresticker
If we receive EC interrupts after the cros_ec driver has probed, but before the cros_ec_keyb driver has probed, the cros_ec IRQ handler will not run the cros_ec_keyb notifier and the EC will leave the IRQ line asserted. The cros_ec IRQ handler then returns IRQ_HANDLED and the resulting flood of interrupts causes the machine to hang. Since the EC interrupt is currently only used for the keyboard, move the setup and handling of the EC interrupt to the cros_ec_keyb driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: ec_dev->cmd_xfer() returns number of bytes received from ECBill Richardson
When communicating with the EC, the cmd_xfer() function should return the number of bytes it received from the EC, or negative on error. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Check result code from EC messagesBill Richardson
Just because the host was able to talk to the EC doesn't mean that the EC was happy with what it was told. Errors in communincation are not the same as error messages from the EC itself. This change lets the EC report its errors separately. [dianders: Added common function to cros_ec.c] Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: cleanup: Remove EC wrapper functionsBill Richardson
Remove the three wrapper functions that talk to the EC without passing all the desired arguments and just use the underlying communication function that passes everything in a struct intead. This is internal code refactoring only. Nothing should change. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: cleanup: remove unused fields from struct cros_ec_deviceBill Richardson
struct cros_ec_device has a superfluous "name" field. We can get all the debugging info we need from the existing ec_name and phys_name fields, so let's take out the extra field. The printout also has sufficient info in it without explicitly adding the transport. Before this change: cros-ec-spi spi2.0: Chrome EC (SPI) After this change: cros-ec-spi spi2.0: Chrome EC device registered Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Use struct cros_ec_command to communicate with the ECBill Richardson
This is some internal structure reorganization / renaming to prepare for future patches that will add a userspace API to cros_ec. There should be no visible changes. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Detect in-progress commandsSimon Glass
Some commands take a while to execute. Use -EAGAIN to signal this to the caller. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Tweak struct cros_ec_device for clarityBill Richardson
The members of struct cros_ec_device were improperly commented, and intermixed the private and public sections. This is just cleanup to make it more obvious what goes with what. [dianders: left lock in the structure but gave it the name that will eventually be used.] Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: pcf50633: Reconnect -ENOMEM error pathLee Jones
If platform_device_alloc() or platform_device_add_data() fail during pcf50633_probe(), the current code ignores the return error code and continues to attempt to allocate new platform devices for each of the supported regulators. Instead, if any failures occur we should fail out gracefully by cleaning up after ourselves and return the error. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: ab8500-debugfs.c: Cleaning up values that are never usedRickard Strandqvist
Remove variable that are never used This was found using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: sec-core: Prepare regulators for suspend state to reduce power-consumptionChanwoo Choi
This patch use regulator_suspend_prepare() function to prepare the proper state of regulators for suspend state to remove un-necessary leakage power-consumption. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09regulator: s2mps11: Add support S2MPU02 regulator deviceChanwoo Choi
This patch add S2MPU02 regulator device to existing S2MPS11 device driver because of little difference between S2MPS1x and S2MPU02. The S2MPU02 regulator device includes LDO[1-28] and BUCK[1-7]. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Add missing linear_min_sel of S2MPU02 LDO regulators by Jonghwa Lee] Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: sec-core: Add support for S2MPU02 deviceChanwoo Choi
Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: mc13xxx: Use regmap irq framework for interruptsAlexander Shiyan
This patch convert mc13xxx MFD driver to use regmap irq framework for interrupt registration. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: pm8921-core: Remove unused variableSachin Kamat
‘irq_bit’ is unused in the function. Remove it. Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Add comment to explain non-devm regulator_getCharles Keepax
To avoid someone attempting to change this regulator_get back into a devm_regulator_get put a comment in explaining that devres can't be used here as the regulator will be destroyed before devres calls regulator_put. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: wm8994: Add a bunch of missing defaults/readablesCharles Keepax
Ever since this commit: commit d4807ad2c4c0e17b6f00e3be9492c81de0804f40 regmap: Check readable regs in _regmap_read Regmap will refuse to read a register which is not marked as readable, this has highlighted a number of controls in this driver which are not marked as readable/missing defaults. This patch corrects the situation, by adding the missing readables/defaults. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec_spi: Set wakeup capabilityPrathyush K
Set the device as wakeup capable and register the wakeup source. Note: Though it makes more sense to have the SPI framework do this, (either via device tree or by board_info) this change is as per an existing mail chain: https://lkml.org/lkml/2009/8/27/291 Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Use num_core_supplies in arizona_dev_exitCharles Keepax
Currently we call regulator_bulk_disable with ARRAY_SIZE(arizona->core_supplies), however this array may be larger than the number of supplies actually used by the chip we are dealing with. Use the provided num_core_supplies member instead, so that we only disable supplies which actually exist. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Don't use devres for DCVDDCharles Keepax
Currently the Arizona core uses a devm_regulator_get against its own device node to obtain DCVDD. The Arizona core is an MFD device and DCVDD is usually supplied by a child node (arizona-ldo1) of the core. As devres destruction for the MFD device will run after all its children have been destroyed, the regulator will be destroyed before devres calls regulator_put. This causes a warning from both the destruction of the child node, as the regulator is still open, and from the put of the regulator as the regulator device has already been destroyed. This patch handles the regulator get and put without devres to avoid this issue. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Disable DCVDD before we destroy the MFDCharles Keepax
As DCVDD is probably supplied by a child of the MFD device move its disable to before we destroy the MFD children as the regulator likely won't exist after that. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Disable PM runtime at start of driver removalCharles Keepax
We don't want to trigger any PM runtime operations whilst we are tearing down the driver, as things the suspend and resume callbacks rely on might already have been destroyed. So disable PM runtime for the device as the first step arizona_dev_exit. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: tc3589x: Translate onecell, not twocellLinus Walleij
Something changed in the OF parser in the v3.16 merge window making it be strict about passing the number of IRQ cells correctly and disturbing the irqdomain xlate function guard to crash when subdevices try to obtain IRQs like this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at /home/linus/linux-stericsson/kernel/irq/irqdomain.c:676 irq_domain_xlate_twocell+0x40/0x48() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-07915-gf6d059821ce9-dirty #46 [<c0014660>] (unwind_backtrace) from [<c0011424>] (show_stack+0x10/0x14) [<c0011424>] (show_stack) from [<c0432630>] (dump_stack+0x9c/0xd4) [<c0432630>] (dump_stack) from [<c001d5c0>] (warn_slowpath_common+0x6c/0x88) [<c001d5c0>] (warn_slowpath_common) from [<c001d678>] (warn_slowpath_null+0x1c/0x24) [<c001d678>] (warn_slowpath_null) from [<c005acd0>] (irq_domain_xlate_twocell+0x40/0x48) [<c005acd0>] (irq_domain_xlate_twocell) from [<c005b658>] (irq_create_of_mapping+0x64/0x110) [<c005b658>] (irq_create_of_mapping) from [<c02e147c>] (of_irq_get+0x38/0x48) [<c02e147c>] (of_irq_get) from [<c01f8910>] (tc3589x_gpio_probe+0x38/0x1e4) [<c01f8910>] (tc3589x_gpio_probe) from [<c022eedc>] (platform_drv_probe+0x18/0x48) [<c022eedc>] (platform_drv_probe) from [<c022d80c>] (driver_probe_device+0x118/0x24c) [<c022d80c>] (driver_probe_device) from [<c022bf20>] (bus_for_each_drv+0x58/0x8c) [<c022bf20>] (bus_for_each_drv) from [<c022d6c4>] (device_attach+0x74/0x88) [<c022d6c4>] (device_attach) from [<c022cdac>] (bus_probe_device+0x84/0xa8) [<c022cdac>] (bus_probe_device) from [<c022b35c>] (device_add+0x440/0x520) [<c022b35c>] (device_add) from [<c022ec50>] (platform_device_add+0xb4/0x218) [<c022ec50>] (platform_device_add) from [<c0243508>] (mfd_add_device+0x220/0x31c) [<c0243508>] (mfd_add_device) from [<c02436a8>] (mfd_add_devices+0xa4/0x100) [<c02436a8>] (mfd_add_devices) from [<c024312c>] (tc3589x_probe+0x334/0x3c0) [<c024312c>] (tc3589x_probe) from [<c022d80c>] (driver_probe_device+0x118/0x24c) The TC3589x device trees specify the MFD core device as having one interrupt cell (cannot specify flags) so the twocell translation function is clearly wrong, changing it to onecell, as it should be, fixes the regression. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: asic3: Fix potential null pointer dereferenceSachin Kamat
We previously assumed 'mem_sdio' could be null but it is dereferenced in ioremap(). Add a check to avoid a potential null pointer dereference error. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: spi: Fix end of transfer on devices with no spi-msg-delayDoug Anderson
cros_ec_spi makes the assumption that a 0-length message will put the spi chip select back to normal (non cs_toggle mode). This used to be the case back on kernel-3.8 on the spi-s3c64xx driver but doesn't appear to be true anymore. It seems like it was a pretty questionable assumption to begin with, so let's fix the code to be more robust. We know that a message with a single 0-length segment _will_ put things back in order. Change cros_ec_spi to handle this. This wasn't a problem on the main user of cros_ec_spi upstream (tegra) because it specified 'google,cros-ec-spi-msg-delay'. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: Fix cs5535 dependenciesJean Delvare
As far as I know, the CS5535 and CS5536 chipsets are companions of the Geode series of processors, which are 32-bit only. So the CS5535 drivers are not needed on x86-64, except for build testing purpose. This aligns the dependencies to what FB_GEODE already uses. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: timberdale: Depend on X86_32Jean Delvare
As far as I know the Timberdale chip was only used as a companion for Intel Atom E600 series processors. As such, its drivers are only useful on X86_32. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09Merge branches 'ib-mfd-extcon-regulator-3.17', 'ib-mfd-gpio-3.17' and ↵Lee Jones
'ib-mfd-mmc-3.17' into ibs-for-mfd-merged
2014-07-09mfd: rtsx: Add dma transfer functionMicky Ching
rtsx driver using a single function for transfer data, dma map/unmap are placed in one fix function. We need map/unmap dma in different place(for mmc async driver), so add three function for dma map, dma transfer and dma unmap. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-26mfd: ab8500: Fix dt irq mappingGrygorii Strashko
The AD8500 defines itself as interrupt-controller in DT, but it doesn't assign DT node to IRQ domain when creates it. As result, of_irq_xx() helpers don't work because they can't find necessary IRQ domain. Hence, fix it by assigning AD8500 core device DT node to IRQ domain when it's created. This patch fixes STE u8500 Snowball boot failure reported by Kevin Hilman https://lkml.org/lkml/2014/5/27/624 Reported-and-tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-26mfd: davinci: Voicecodec needs regmap_mmioArnd Bergmann
Without REGMAP_MMIO, building that driver results in a link error: drivers/built-in.o: In function `davinci_vc_probe': :(.init.text+0x3c1c): undefined reference to `devm_regmap_init_mmio_clk' This adds a Kconfig 'select' statement as the usual way to ensure that REGMAP_MMIO is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-26mfd: STw481x: Allow modular buildArnd Bergmann
This driver depends on I2C, which may be a loadable module. While you'd probably want both to be built-in in practice, allowing a modular build avoids possible randconfig link errors. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-02 14:19:02 +0000