summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)Author
2018-08-21Merge branch 'i2c/for-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - the core has now a lockless variant of i2c_smbus_xfer. Some open coded versions of this got removed in drivers. This also enables proper SCCB support in regmap. - locking got a more precise naming. i2c_{un}lock_adapter() had to go, and we know use i2c_lock_bus() consistently with flags like I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity. - the gpio fault injector got a new delicate testcase - the bus recovery procedure got fixed to handle the new testcase correctly - a new quirk flag for controllers not able to handle zero length messages together with driver updates to use it - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl family S900 - and a good set of driver improvements and bugfixes * 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: rcar: implement STOP and REP_START according to docs i2c: rcar: refactor private flags i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes dt-bindings: i2c: rcar: Add r8a774a1 support dt-bindings: i2c: sh_mobile: Add r8a774a1 support i2c: imx: Simplify stopped state tracking i2c: imx: Fix race condition in dma read i2c: pasemi: remove hardcoded bus numbers on smbus i2c: designware: Add SPDX license tag i2c: designware: Convert to use struct i2c_timings i2c: core: Parse SDA hold time from firmware i2c: designware-pcidrv: Mark expected switch fall-through i2c: amd8111: Mark expected switch fall-through i2c: sh_mobile: use core to detect 'no zero length read' quirk i2c: xlr: use core to detect 'no zero length' quirk i2c: rcar: use core to detect 'no zero length' quirk i2c: stu300: use core to detect 'no zero length' quirk i2c: pmcmsp: use core to detect 'no zero length' quirk i2c: mxs: use core to detect 'no zero length' quirk ...
2018-08-20Merge tag 'mfd-next-4.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - Add Cirrus Logic Madera Codec (CS47L35, CS47L85 and CS47L90/91) driver - Add ChromeOS EC CEC driver - Add ROHM BD71837 PMIC driver New Device Support: - Add support for Dialog Semi DA9063L PMIC variant to DA9063 - Add support for Intel Ice Lake to Intel-PLSS-PCI - Add support for X-Powers AXP806 to AXP20x New Functionality: - Add support for USB Charging to the ChromeOS Embedded Controller - Add support for HDMI CEC to the ChromeOS Embedded Controller - Add support for HDMI CEC to Intel HDMI - Add support for accessory detection to Madera devices - Allow individual pins to be configured via DT' wlf,csnaddr-pd - Provide legacy platform specific EEPROM/Watchdog commands; rave-sp Fix-upsL - Trivial renaming/spelling fixes; cros_ec, da9063-* - Convert to Managed Resources (devm_*); da9063-*, ti_am335x_tscadc - Transition to helper macros/functions; da9063-* - Constify; kempld-core - Improve error path/messages; wm8994-core - Disable IRQs locally instead of relying on USB subsystem; dln2 - Remove unused code; rave-sp - New exports; sec-core Bug Fixes: - Fix possible false I2C transaction error; arizona-core - Fix declared memory area size; hi655x-pmic - Fix checksum type; rave-sp - Fix incorrect default serial port configuration: rave-sp - Fix incorrect coherent DMA mask for sub-devices; sm501" * tag 'mfd-next-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits) mfd: madera: Add register definitions for accessory detect mfd: sm501: Set coherent_dma_mask when creating subdevices mfd: bd71837: Devicetree bindings for ROHM BD71837 PMIC mfd: bd71837: Core driver for ROHM BD71837 PMIC media: platform: cros-ec-cec: Fix dependency on MFD_CROS_EC mfd: sec-core: Export OF module alias table mfd: as3722: Disable auto-power-on when AC OK mfd: axp20x: Support AXP806 in I2C mode mfd: axp20x: Add self-working mode support for AXP806 dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 mfd: wm8994: Allow to configure CS/ADDR Pulldown from dts mfd: wm8994: Allow to configure Speaker Mode Pullup from dts mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support it mfd: rave-sp: Add legacy watchdog ping command translation mfd: rave-sp: Add legacy EEPROM access command translation mfd: rave-sp: Initialize flow control and parity of the port mfd: rave-sp: Fix incorrectly specified checksum type mfd: rave-sp: Remove unused defines mfd: hi655x: Fix regmap area declared size for hi655x mfd: ti_am335x_tscadc: Fix struct clk memory leak ...
2018-08-16mfd: sm501: Set coherent_dma_mask when creating subdevicesGuenter Roeck
Instantiating the sm501 OHCI subdevice results in a kernel warning. sm501-usb sm501-usb: SM501 OHCI sm501-usb sm501-usb: new USB bus registered, assigned bus number 1 WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 ohci_init+0x194/0x2d8 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc7-00178-g0b5b1f9a78b5 #1 PC is at ohci_init+0x194/0x2d8 PR is at ohci_init+0x168/0x2d8 PC : 8c27844c SP : 8f81dd94 SR : 40008001 TEA : 29613060 R0 : 00000000 R1 : 00000000 R2 : 00000000 R3 : 00000202 R4 : 8fa98b88 R5 : 8c277e68 R6 : 00000000 R7 : 00000000 R8 : 8f965814 R9 : 8c388100 R10 : 8fa98800 R11 : 8fa98928 R12 : 8c48302c R13 : 8fa98920 R14 : 8c48302c MACH: 00000096 MACL: 0000017c GBR : 00000000 PR : 8c278420 Call trace: [<(ptrval)>] usb_add_hcd+0x1e8/0x6ec [<(ptrval)>] _dev_info+0x0/0x54 [<(ptrval)>] arch_local_save_flags+0x0/0x8 [<(ptrval)>] arch_local_irq_restore+0x0/0x24 [<(ptrval)>] ohci_hcd_sm501_drv_probe+0x114/0x2d8 ... Initialize coherent_dma_mask when creating SM501 subdevices to fix the problem. Fixes: b6d6454fdb66f ("mfd: SM501 core driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-08-16mfd: bd71837: Core driver for ROHM BD71837 PMICMatti Vaittinen
ROHM BD71837 PMIC MFD driver providing interrupts and support for three subsystems: - clk - Regulators - input/power-key Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: sec-core: Export OF module alias tableKrzysztof Kozlowski
In case of Device Tree platforms, even though the Samsung PMIC sec device is instantiated from DT, the driver is still matched through I2C module alias. That is because I2C core always reports an I2C module alias instead of DT one. This could change in the future so export DT module alias. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: as3722: Disable auto-power-on when AC OKMarcel Ziswiler
On ams AS3722, power on when AC OK is enabled by default. Making this option as disable by default and enable only when platform need this explicitly. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Bibek Basu <bbasu@nvidia.com> Tested-by: Bibek Basu <bbasu@nvidia.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: axp20x: Support AXP806 in I2C modeChen-Yu Tsai
The Pine64 H64 board uses an AXP806 PMIC in I2C and self-working mode. The H64 SoC does not have the usual RSB controller. This patch adds AXP806 to the list of devices supported in I2C mode. In theory, all RSB-based PMICs can also be used in I2C mode. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: axp20x: Add self-working mode support for AXP806Chen-Yu Tsai
The AXP806 can operate in a standalone "self-working" mode, in which it is also responsible for power control of the overall system. This mode is similar to the master mode, but the EN/PWRON pin functions as a power button, instead of a level-triggered enable switch. This patch adds code checking for the new "x-powers,self-working-mode" property, and a separate mfd_cell list that includes the power button (PEK) sub-device. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: wm8994: Allow to configure CS/ADDR Pulldown from dtsAlberto Panizzo
For designs where CS/ADDR pin is floating, it is useful to allow dts to define whether to keep internal pull down or not. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: wm8994: Allow to configure Speaker Mode Pullup from dtsAlberto Panizzo
Configuring Speaker Mode Pullup was already supported in pdata, but not in the dts. Signed-off-by: Alberto Panizzo <alberto@amarulasolutions.com> Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: rave-sp: Emulate CMD_GET_STATUS on device that don't support itAndrey Smirnov
CMD_GET_STATUS is not supported by some devices implementing RDU2-compatible ICD as well as "legacy" devices. To account for that fact, add code that obtains the same information (app/bootloader FW version) using several different commands. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: rave-sp: Add legacy watchdog ping command translationAndrey Smirnov
This is needed to make rave-sp-wdt driver to properly ping the watchdog on "legacy" firmware. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: rave-sp: Add legacy EEPROM access command translationAndrey Smirnov
This is needed to make rave-sp-eeprom driver work on "legacy" firmware. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: rave-sp: Initialize flow control and parity of the portAndrey Smirnov
Relying on serial port defaults for flow control and parity can result in complete breakdown of communication with RAVE SP on some platforms where defaults are not what we need them to be. One such case is VF610-base ZII SPU3 board (not supported upstream). To avoid this problem in the future, add code to explicitly configure both. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: rave-sp: Fix incorrectly specified checksum typeAndrey Smirnov
RAVE SP firmware covered by "legacy" variant uses 16-bit CCITT checksum algorithm. Change the code to correctly reflect that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: rave-sp: Remove unused definesAndrey Smirnov
Remove unusded defines that are a leftover from earlier iterations of the driver. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: hi655x: Fix regmap area declared size for hi655xRafael David Tinoco
Fixes https://bugs.linaro.org/show_bug.cgi?id=3903 LTP Functional tests have caused a bad paging request when triggering the regmap_read_debugfs() logic of the device PMIC Hi6553 (reading regmap/f8000000.pmic/registers file during read_all test): Unable to handle kernel paging request at virtual address ffff0 [ffff00000984e000] pgd=0000000077ffe803, pud=0000000077ffd803,0 Internal error: Oops: 96000007 [#1] SMP ... Hardware name: HiKey Development Board (DT) ... Call trace: regmap_mmio_read8+0x24/0x40 regmap_mmio_read+0x48/0x70 _regmap_bus_reg_read+0x38/0x48 _regmap_read+0x68/0x170 regmap_read+0x50/0x78 regmap_read_debugfs+0x1a0/0x308 regmap_map_read_file+0x48/0x58 full_proxy_read+0x68/0x98 __vfs_read+0x48/0x80 vfs_read+0x94/0x150 SyS_read+0x6c/0xd8 el0_svc_naked+0x30/0x34 Code: aa1e03e0 d503201f f9400280 8b334000 (39400000) Investigations have showed that, when triggered by debugfs read() handler, the mmio regmap logic was reading a bigger (16k) register area than the one mapped by devm_ioremap_resource() during hi655x-pmic probe time (4k). This commit changes hi655x's max register, according to HW specs, to be the same as the one declared in the pmic device in hi6220's dts, fixing the issue. Cc: <stable@vger.kernel.org> #v4.9 #v4.14 #v4.16 #v4.17 Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: ti_am335x_tscadc: Fix struct clk memory leakZumeng Chen
Use devm_elk_get() to let Linux manage struct clk memory to avoid the following memory leakage report: unreferenced object 0xdd75efc0 (size 64): comm "systemd-udevd", pid 186, jiffies 4294945126 (age 1195.750s) hex dump (first 32 bytes): 61 64 63 5f 74 73 63 5f 66 63 6b 00 00 00 00 00 adc_tsc_fck..... 00 00 00 00 92 03 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c0a15260>] kmemleak_alloc+0x40/0x74 [<c0287a10>] __kmalloc_track_caller+0x198/0x388 [<c0255610>] kstrdup+0x40/0x5c [<c025565c>] kstrdup_const+0x30/0x3c [<c0636630>] __clk_create_clk+0x60/0xac [<c0630918>] clk_get_sys+0x74/0x144 [<c0630cdc>] clk_get+0x5c/0x68 [<bf0ac540>] ti_tscadc_probe+0x260/0x468 [ti_am335x_tscadc] [<c06f3c0c>] platform_drv_probe+0x60/0xac [<c06f1abc>] driver_probe_device+0x214/0x2dc [<c06f1c18>] __driver_attach+0x94/0xc0 [<c06efe2c>] bus_for_each_dev+0x90/0xa0 [<c06f1470>] driver_attach+0x28/0x30 [<c06f1030>] bus_add_driver+0x184/0x1ec [<c06f2b74>] driver_register+0xb0/0xf0 [<c06f3b4c>] __platform_driver_register+0x40/0x54 Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: dln2: Use irqsave() in USB's complete callbackSebastian Andrzej Siewior
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: arizona: Don't use regmap_read_poll_timeoutCharles Keepax
Some Arizona CODECs have a small timing window where they will NAK an I2C transaction if it happens before the boot done bit is set. This can cause the read of the register containing the boot done bit to fail until it is set. Since regmap_read_poll_timeout will abort polling if a read fails it can't be reliably used to poll the boot done bit over I2C. Do a partial revert of ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg"), removing the regmap_read_poll_timeout but leaving the refactoring to make the arizona_poll_reg take more sensible arguments. Fixes: ef84f885e037 ("mfd: arizona: Refactor arizona_poll_reg") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: intel-lpss: Add Ice Lake PCI IDsMika Westerberg
Intel Ice Lake has the same LPSS than Intel Cannon Lake. Add the new IDs to the list of supported devices. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: wm8994-core: Fix error path in wm8994_device_initAnthony Brandon
For some errors, the wm8994_device_init function was returning or jumping to the wrong point in the error path. Signed-off-by: Anthony Brandon <anthony@amarulasolutions.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27mfd: kempld-core: Constify variables that point to const structureJulia Lawall
Add const to the declaration of various local variables of type kempld_platform_data for which the referenced value is always only dereferenced or passed to a const parameter, to record the fact that kempld_platform_data_generic is declared as const. The semantic match that finds this issue is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier i,j; @@ const struct i j = { ... }; @ok@ identifier r.i; position p; @@ const struct i@p * @@ identifier r.i; position p != ok.p; @@ * struct i@p * // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-27Merge branches 'ib-mfd-4.19', 'ib-mfd-gpio-pinctrl-4.19', ↵Lee Jones
'ib-mfd-i915-media-platform-4.19' and 'ib-mfd-regulator-4.19', tag 'ib-platform-chrome-mfd-move-cros-ec-transport-for-4.19' into ibs-for-mfd-merged Immutable branch (mfd, chrome) due for the v4.19 window Immutable Branch which moves the cros_ec_i2c and cros_ec_spi transport drivers from mfd to platform/chrome. Changes in arm are a simple rename in defconfigs. Change in input is a rename in help text.
2018-07-13mfd: cros_ec_dev: Add CEC sub-device registrationNeil Armstrong
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device when the CEC feature bit is present. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-13mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)Peter Rosin
Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-04mfd: da9063: Add DA9063L supportMarek Vasut
Add support for DA9063L, which is a reduced variant of the DA9063 with less regulators and without RTC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Register RTC only on DA9063LMarek Vasut
The DA9063L does not contain RTC block, unlike the full DA9063. Split the RTC block into separate mfd cell and register it only on DA9063. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Add custom IRQ map for DA9063LMarek Vasut
The DA9063L does not have an RTC. Add custom IRQ map for DA9063L to ignore the Alarm and Tick IRQs from the PMIC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Add custom regmap for DA9063LMarek Vasut
The DA9063L does not have an RTC. Add custom regmap for DA9063L to prevent access into that register block. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Replace model with typeMarek Vasut
The model number stored in the struct da9063 is the same for all variants of the da9063 since it is the chip ID, which is always the same. Replace that with a separate identifier instead, which allows us to discern the DA9063 variants by setting the type based on either DT match or otherwise. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Rename PMIC_DA9063 to PMIC_CHIP_ID_DA9063Marek Vasut
The PMIC_DA9063 is a complete misnomer, it denotes the value of the DA9063 chip ID register, so rename it as such. It is also the value of chip ID register of DA9063L though, so drop the enum as all the DA9063 "models" share the same chip ID and thus the distinction will have to be made using DT or otherwise. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Replace DA9063_NUM_IRQ with ARRAY_SIZEMarek Vasut
Replace DA9063_NUM_IRQ macro which is not used anywhere with plain ARRAY_SIZE(). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Use PLATFORM_DEVID_NONEMarek Vasut
Use PLATFORM_DEVID_NONE instead of -1 in mfd_add_devices. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Use REGMAP_IRQ_REGMarek Vasut
Convert the regmap_irq table to use REGMAP_IRQ_REG(). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Acked-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Use regmap_reg_rangeMarek Vasut
Convert the regmap_range tables to use regmap_reg_range() macro. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Replace mfd_add_devices with devm counterpartMarek Vasut
Use devm_mfd_add_devices() instead of plain mfd_add_devices(), which removes the need for da9063_device_exit() altogether and also for the .remove callback in da9063-i2c.c . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: da9063: Replace regmap_add_irq_chip with devm counterpartMarek Vasut
Use devm_regmap_add_irq_chip() instead of plain regmap_add_irq_chip(), which removes the need for da9063_irq_exit() altogether and also fixes a bug in da9063_device_init() where the da9063_irq_exit() was not called in a failpath. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-04mfd: cros_ec_dev: Register cros_usbpd-charger driver as a subdevice.Enric Balletbo i Serra
Check whether this EC instance has USBPD host command support and instatiate the cros_usbpd-charger driver as a subdevice in such case. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-07-03platform/chrome: Move cros-ec transport drivers to drivers/platform.Enric Balletbo i Serra
There are some cros-ec transport drivers (I2C, SPI) living in MFD, while others (LPC) living in drivers/platform. The transport drivers are more platform specific. So, move the I2C and SPI transport drivers to the platform/chrome directory. The patch also removes the MFD_ prefix of their Kconfig symbols. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Benson Leung <bleung@chromium.org>
2018-06-14Merge branch 'i2c/for-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...) - conversion to use the i2c_8bit_addr_from_msg macro consistently - move includes to platform_data - core updates to allow the (still in review) I3C subsystem to connect - and the regular share of smaller driver updates * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits) i2c: qup: fix building without CONFIG_ACPI i2c: tegra: Remove suspend-resume i2c: imx-lpi2c: Switch to SPDX identifier i2c: mxs: Switch to SPDX identifier i2c: busses: make use of i2c_8bit_addr_from_msg i2c: algos: make use of i2c_8bit_addr_from_msg i2c: rcar: document R8A77980 bindings i2c: qup: Add command-line parameter to override SCL frequency i2c: qup: Correct duty cycle for FM and FM+ i2c: qup: Add support for Fast Mode Plus i2c: qup: add probe path for Centriq ACPI devices i2c: robotfuzz-osif: drop pointless test i2c: robotfuzz-osif: remove pointless local variable i2c: rk3x: Don't print visible virtual mapping MMIO address i2c: opal: don't check number of messages in the driver i2c: ibm_iic: don't check number of messages in the driver i2c: imx: Switch to SPDX identifier i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data i2c: mux: demux-pinctrl: use proper parent device for demux adapter i2c: mux: improve error message for failed symlink ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'mfd-next-4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - Add support for AXP813 ADC to AXP20x - Add support for PM8005, PM8998 and PMI8998 New Functionality: - Add support for Battery Power Supply to AXP813 - Add support for SYSCON to SPARD SC27XX SPI - Add support for RTC to ChromeOS Embedded-Controller Fix-ups: - Remove unused code; exynos{4,5}-pmu, cros_ec, cros_ec_acpi_gpe - Remove duplicate error messages (-ENOMEM, etc); htc-i2cpld, janz-cmodio, max8997, rc5t583, sm501, smsc-ece1099, abx500-core, si476x-i2c, ti_am335x_tscadc, tps65090, tps6586x, tps65910, tps80031, twl6030-irq, viperboard - Succinctly use ptr to struct in sizeof(); rc5t583, abx500-core, sm501, smsc-ece1099 - Simplify syntax for NULL ptr checking; abx500-core, sm501 - No not unnecessarily initialise variables; tps65910, tps65910 - Reorganise and simplify driver data; omap-usb-tll - Move to SPDX license statement; tps68470 - Probe ADCs via DT; axp20x - Use new GPIOD API; arizona-core - Constify things; axp20x - Reduce code-size (use MACROS, etc); axp20x, omap-usb-host - Add DT support/docs; motorola-cpcap - Remove VLAs; rave-sp - Use devm_* managed resources; cros_ec - Interrogate HW for firmware version; rave-sp - Provide ACPI support for ChromeOS Embedded-Controller Bug Fixes: - Reorder ordered (enum) device list; tps65218 - Only accept valid data from the offset; rave-sp - Refrain from copying junk from failed SPI read; cros_ec_dev - Fix potential memory leaks; pcf50633-core - Fix clock initialisation; twl-core - Fix build-issue; tps65911 - Fix off-by-one error; tps65911 - Fix code ordering issues; intel-lpss - Fix COMPILE_TEST related issues; pwm-stm32 - Fix broken MMC card detection; asic3 - Fix clocking related issues; intel-lpss-pci" * tag 'mfd-next-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: cros_ec: Remove unused __remove function mfd: wm97xx-core: Platform data can be NULL mfd: cros_ec_dev: Don't advertise junk features on failure mfd: cros_ec: Use devm_kzalloc for private data mfd: intel-lpss: Fix Intel Cannon Lake LPSS I2C input clock mfd: asic3: Fix broken MMC card detection mfd: timberdale: Fix spelling mistake "Uknown" -> "Unknown" mfd: omap-usb-host: Use match_string() helper mfd: stm32-timers: Fix pwm-stm32 linker issue with COMPILE_TEST pwm: stm32: Initialize raw local variables mfd: arizona: Update DT doc to support more standard Reset binding dt-bindings: mfd: Add bindings for DA9063L mfd: intel-lpss: Correct names of RESETS register bits mfd: qcom-spmi-pmic: Add support for pm8005, pm8998 and pmi8998 mfd: intel-lpss: Program REMAP register in PIO mode mfd: cros_ec_i2c: Moving the system sleep pm ops to late mfd: cros_ec_i2c: Add ACPI module device table mfd: cros_ec_dev: Register shutdown function for debugfs mfd: cros_ec_dev: Register cros-ec-rtc driver as a subdevice mfd: cros_ec: Don't try to grab log when suspended ...
2018-06-11mfd: cros_ec: Remove unused __remove functionArnd Bergmann
This function is no longer called, so we get a harmless warning until it is removed as well: drivers/mfd/cros_ec_dev.c:265:13: error: '__remove' defined but not used [-Werror=unused-function] Fixes: 3aa2177e4787 ("mfd: cros_ec: Use devm_kzalloc for private data") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-11mfd: wm97xx-core: Platform data can be NULLRobert Jarzmik
It is not mandatory that platform data is passed along the ac97 codec. Actually there are configuration without a battery connected to the ADC of the codec. This is for example the case for the PXA zylonite platform, so fix the NULL dereferencing by adding a test. Fixes: a5c6951c49fb ("mfd: wm97xx-core: core support for wm97xx Codec") Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-06-08Merge tag 'regulator-v4.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Quite a lot of core work this time around, though not 100% successful. We gained support for runtime mode changes thanks to David Collins and improved support for write only regulators (ones where we can't read back the configuration) from Douglas Anderson. There's been quite a bit of work from Linus Walleij on converting from specfying GPIOs by numbers to descriptors. Sadly the testing turned out to be less good than we had hoped and so a lot of this had to be reverted. We also have the start of updates to use coupled regulators from Maciej Purski, unfortunately there are further problems there so the last couple of patches have been reverted. We also have new drivers for BD71837 and SY8106A devices, SAW regulators on Qualcomm SPMI and dropped support for some preproduction chips that never made it to market from the AB8500 driver" * tag 'regulator-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (57 commits) regulator: gpio: Revert ARM: pxa, regulator: fix building ezx e680 regulator: Revert coupled regulator support again regulator: wm8994: Fix shared GPIOs regulator: max77686: Fix shared GPIOs regulator: bd71837: BD71837 PMIC regulator driver regulator: bd71837: Devicetree bindings for BD71837 regulators regulator: gpio: Get enable GPIO using GPIO descriptor regulator: fixed: Convert to use GPIO descriptor only regulator: s2mps11: Fix boot on Odroid XU3 dt-bindings: qcom_spmi: Document SAW support regulator: qcom_spmi: Add support for SAW regulator: tps65090: Pass descriptor instead of GPIO number regulator: s5m8767: Pass descriptor instead of GPIO number regulator: pfuze100: Delete reference to ena_gpio regulator: max8952: Pass descriptor instead of GPIO number regulator: lp8788-ldo: Pass descriptor instead of GPIO number regulator: lm363x: Pass descriptor instead of GPIO number regulator: max8973: Pass descriptor instead of GPIO number regulator: mc13xxx-core: Switch to SPDX identifier ...
2018-06-08Merge tag 'gpio-v4.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.18 development cycle. Core changes: - We have killed off VLA from the core library and all drivers. The background should be clear for everyone at this point: https://lwn.net/Articles/749064/ Also I just don't like VLA's, kernel developers hate it when compilers do things behind their back. It's as simple as that. I'm sorry that they even slipped in to begin with. Kudos to Laura Abbott for exorcising them. - Support GPIO hogs in machines/board files. New drivers and chip support: - R-Car r8a77470 (RZ/G1C) - R-Car r8a77965 (M3-N) - R-Car r8a77990 (E3) - PCA953x driver improvements to accomodate more variants. Improvements and new features: - Support one interrupt per line on port A in the DesignWare dwapb driver. Misc: - Random cleanups, right header files in the drivers, some size optimizations etc" * tag 'gpio-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits) gpio: davinci: fix build warning when !CONFIG_OF gpio: dwapb: Fix rework support for 1 interrupt per port A GPIO gpio: pxa: Include the right header gpio: pl061: Include the right header gpio: pch: Include the right header gpio: pcf857x: Include the right header gpio: pca953x: Include the right header gpio: palmas: Include the right header gpio: omap: Include the right header gpio: octeon: Include the right header gpio: mxs: Switch to SPDX identifier gpio: Remove VLA from stmpe driver gpio: mxc: Switch to SPDX identifier gpio: mxc: add clock operation gpio: Remove VLA from gpiolib gpio: aspeed: Use a cache of output data registers gpio: aspeed: Set output latch before changing direction gpio: pca953x: fix address calculation for pcal6524 gpio: pca953x: define masks for addressing common and extended registers gpio: pca953x: set the PCA_PCAL flag also when matching by DT ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 08:38:29 +0000