summaryrefslogtreecommitdiff
path: root/drivers/mfd/max14577.c
AgeCommit message (Collapse)Author
2019-08-12mfd: max14577: Convert to i2c_new_dummy_deviceWolfram Sang
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: maxim: Add SPDX license identifiersKrzysztof Kozlowski
Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: max14577: Change Krzysztof Kozlowski's email to kernel.orgKrzysztof Kozlowski
Change my email address to kernel.org instead of Samsung one for the purpose of any future contact. The copyrights remain untouched and are attributed to Samsung. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-06-29mfd: max14577: Use module_init() instead of subsys_initcall()Javier Martinez Canillas
The driver's init function is called at subsys init call level but the dependencies provided by the driver are looked up by drivers that have probe deferral support, so manual ordering of init calls isn't needed. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-01-14mfd: Use to_i2c_client() instead of open-coding itGeliang Tang
Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-11mfd: Drop owner assignment from i2c_driversKrzysztof Kozlowski
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25mfd: max14577: Fix obvious typo in company name in copyrightKrzysztof Kozlowski
Fix a typo in name of company in copyright comment. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-26mfd: max14577: Don't pass IRQ domain to mfd_add_devicesKrzysztof Kozlowski
The max14577 MFD cells do not have any resources so the IRQ domain passed to mfd_add_devices is not used. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24regulator/mfd: max14577: Export symbols for calculating charger currentKrzysztof Kozlowski
This patch prepares for changing the max14577 charger driver to allow configuring battery-dependent settings from DTS. The patch moves from regulator driver to MFD core driver and exports: - function for calculating register value for charger's current; - table of limits for chargers (MAX14577, MAX77836). Previously they were used only by the max14577 regulator driver. In next patch the charger driver will use them as well. Exporting them will reduce unnecessary code duplication. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-09-24mfd: max14577: Map charger device to its own of_nodeKrzysztof Kozlowski
Add a "maxim,max14577-charger" of_compatible to the mfd_cell so the MFD child device (the charger) will have its own of_node set. This will be used by the max14577 charger driver in next patches to obtain battery configuration from DTS. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: max14577: Cast to architecture agnostic data typeLee Jones
drivers/mfd/max14577.c:334:25: warning: cast from pointer to integer of different size max14577->dev_type = (unsigned int)of_id->data; ^ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: max14577: Make mfd_cell array constKrzysztof Kozlowski
mfd_add_devices() expects array of struct mfd_cell to be const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: max14577: Make of_device_id array constKrzysztof Kozlowski
Array of struct of_device_id should be const as expected by both of_match_table field and of_match_device() call. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-03mfd: max14577: Fix IRQ handling after resume if this is not a wakeup sourceKrzysztof Kozlowski
During suspend the IRQ should be disabled even if this is not a wakeup source. This is a proper way of fixing the IRQ handling issue during resume (IRQ handler fails because I2C bus did not resume yet). When device is suspended and max14577 interrupt is signaled the irq chip will try to handle it regardless of wakeup source. Device could be woken up by different IRQ but still the IRQ handler will try to read the registers over I2C bus and fail because I2C bus won't be ready yet: max14577 2-0025: Failed to read IRQ status: -5 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23extcon: max14577: Add support for MAX77836Krzysztof Kozlowski
Add support for MAX77836 chipset to the max14577 extcon driver. The MAX77836 MUIC has additional interrupts (VIDRM, ADC1K) so IRQ handling is split up into two functions: max14577_parse_irq() and max77836_parse_irq(). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23mfd: max77836: Add MAX77836 support to max14577 driverKrzysztof Kozlowski
Add Maxim 77836 support to max14577 driver. The chipsets have same MUIC component so the extcon, charger and regulators are almost the same. The MAX77836 however has also PMIC and Fuel Gauge. The MAX77836 uses three I2C slave addresses and has additional interrupts (related to PMIC and Fuel Gauge). It has also Interrupt Source register, just like MAX77686 and MAX77693. The MAX77836 PMIC's TOPSYS and INTSRC interrupts are reported in the PMIC block. The PMIC block has different I2C slave address and uses own regmap so another regmap_irq_chip is needed. Since we have two regmap_irq_chip, use shared interrupts on MAX77836. This patch adds additional defines and functions to the max14577 MFD core driver so the driver will handle both chipsets. Also this patch replaces "0x1 << N" with BIT(N) in defines for register masks. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23mfd: max14577: Add MAX14577 prefix to IRQ definesKrzysztof Kozlowski
This patch prepares for adding support for MAX77836 device to existing max14577 driver by adding MAX14577 prefix to defines of interrupts. This is only a rename-like patch, new code is not added. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23mfd: max14577: Add detection of device typeKrzysztof Kozlowski
This patch continues the preparation for adding support for MAX77836 device to existing max14577 driver. Add enum for types of devices supported by this driver. The device type will be detected by matching of_device_id, or i2c_device_id as a fallback. The patch also moves to separate function the code related to displaying DeviceID register values. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-23mfd: max14577: Add muic prefix to regmap configKrzysztof Kozlowski
Add muic prefix to regmap config to differentiate between another regmap config for MAX77836 PMIC node. Additionally remove unused symbols: MAX14577_REG_INVALID and max14577_irq_source. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max14577: Include missing err.hSachin Kamat
Add this header explicitly for IS_ERR and friends. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-19mfd: max14577: Add of_compatible to extcon mfd_cellKrzysztof Kozlowski
Add of_compatible ("maxim,max14577-muic") to the mfd_cell for extcon driver. If entry with such compatible is present in the DTS, the extcon driver will have of_node set. This may be useful for extcon consumers and it is documented in bindings documentation. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: max14577: max14577_{suspend,resume}() should depend on CONFIG_PM_SLEEPGeert Uytterhoeven
If CONFIG_PM_SLEEP=n: drivers/mfd/max14577.c:177: warning: ‘max14577_suspend’ defined but not used drivers/mfd/max14577.c:200: warning: ‘max14577_resume’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Remove redundant of_match_ptr helperSachin Kamat
'max14577_dt_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Cleanup an error messageDan Carpenter
"pdata" is a NULL not an ERR_PTR so there is no use printing it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Match regulator by of_compatible stringKrzysztof Kozlowski
Match max14577 regulator driver by of_compatible specified in mfd_cell. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Add max14577 MFD driver coreChanwoo Choi
This patch adds max14577 core/irq driver to support MUIC(Micro USB IC) device and charger device and support irq domain method to control internal interrupt of max14577 device. Also, this patch supports DT binding with max14577_i2c_parse_dt(). The MAXIM 14577 chip contains Micro-USB Interface Circuit and Li+ Battery Charger. It contains accessory and USB charger detection logic. It supports USB 2.0 Hi-Speed, UART and stereo audio signals over Micro-USB connector. The battery charger is compliant with the USB Battery Charging Specification Revision 1.1. It has also SFOUT LDO output for powering USB devices. Reviewed-by: Mark Brown <broonie@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 04:46:53 +0000